arch/arm/mach-mmp/devices.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * linux/arch/arm/mach-mmp/devices.c
   4  */
   5
   6 #include <linux/init.h>
   7 #include <linux/platform_device.h>
   8 #include <linux/dma-mapping.h>
   9 #include <linux/delay.h>
  10
  11 #include <asm/irq.h>
  12 #include "irqs.h"
  13 #include "devices.h"
  14 #include <linux/soc/mmp/cputype.h>
  15 #include "regs-usb.h"
  16
  17 int __init pxa_register_device(struct pxa_device_desc *desc,
  18                                 void *data, size_t size)
  19 {
  20         struct platform_device *pdev;
  21         struct resource res[2 + MAX_RESOURCE_DMA];
  22         int i, ret = 0, nres = 0;
  23
  24         pdev = platform_device_alloc(desc->drv_name, desc->id);
  25         if (pdev == NULL)
  26                 return -ENOMEM;
  27
  28         pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
  29
  30         memset(res, 0, sizeof(res));
  31
  32         if (desc->start != -1ul && desc->size > 0) {
  33                 res[nres].start = desc->start;
  34                 res[nres].end   = desc->start + desc->size - 1;
  35                 res[nres].flags = IORESOURCE_MEM;
  36                 nres++;
  37         }
  38
  39         if (desc->irq != NO_IRQ) {
  40                 res[nres].start = desc->irq;
  41                 res[nres].end   = desc->irq;
  42                 res[nres].flags = IORESOURCE_IRQ;
  43                 nres++;
  44         }
  45
  46         for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
  47                 if (desc->dma[i] == 0)
  48                         break;
  49
  50                 res[nres].start = desc->dma[i];
  51                 res[nres].end   = desc->dma[i];
  52                 res[nres].flags = IORESOURCE_DMA;
  53         }
  54
  55         ret = platform_device_add_resources(pdev, res, nres);
  56         if (ret) {
  57                 platform_device_put(pdev);
  58                 return ret;
  59         }
  60
  61         if (data && size) {
  62                 ret = platform_device_add_data(pdev, data, size);
  63                 if (ret) {
  64                         platform_device_put(pdev);
  65                         return ret;
  66                 }
  67         }
  68
  69         return platform_device_add(pdev);
  70 }
  71
  72 #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
  73 #if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
  74 #if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
  75
  76 /*****************************************************************************
  77  * The registers read/write routines
  78  *****************************************************************************/
  79
  80 static unsigned int u2o_get(void __iomem *base, unsigned int offset)
  81 {
  82         return readl_relaxed(base + offset);
  83 }
  84
  85 static void u2o_set(void __iomem *base, unsigned int offset,
  86                 unsigned int value)
  87 {
  88         u32 reg;
  89
  90         reg = readl_relaxed(base + offset);
  91         reg |= value;
  92         writel_relaxed(reg, base + offset);
  93         readl_relaxed(base + offset);
  94 }
  95
  96 static void u2o_clear(void __iomem *base, unsigned int offset,
  97                 unsigned int value)
  98 {
  99         u32 reg;
 100
 101         reg = readl_relaxed(base + offset);
 102         reg &= ~value;
 103         writel_relaxed(reg, base + offset);
 104         readl_relaxed(base + offset);
 105 }
 106
 107 static void u2o_write(void __iomem *base, unsigned int offset,
 108                 unsigned int value)
 109 {
 110         writel_relaxed(value, base + offset);
 111         readl_relaxed(base + offset);
 112 }
 113
 114
 115 static DEFINE_MUTEX(phy_lock);
 116 static int phy_init_cnt;
 117
 118 static int usb_phy_init_internal(void __iomem *base)
 119 {
 120         int loops;
 121
 122         pr_info("Init usb phy!!!\n");
 123
 124         /* Initialize the USB PHY power */
 125         if (cpu_is_pxa910()) {
 126                 u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
 127                         | (1<<UTMI_CTRL_PU_REF_SHIFT));
 128         }
 129
 130         u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
 131         u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
 132
 133         /* UTMI_PLL settings */
 134         u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
 135                 | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
 136                 | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
 137                 | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
 138
 139         u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
 140                 | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
 141                 | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
 142                 | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
 143
 144         /* UTMI_TX */
 145         u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
 146                 | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
 147                 | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
 148                 | UTMI_TX_AMP_MASK);
 149         u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
 150                 | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
 151                 | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
 152
 153         /* UTMI_RX */
 154         u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
 155                 | UTMI_REG_SQ_LENGTH_MASK);
 156         u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
 157                 | 2<<UTMI_REG_SQ_LENGTH_SHIFT);
 158
 159         /* UTMI_IVREF */
 160         if (cpu_is_pxa168())
 161                 /* fixing Microsoft Altair board interface with NEC hub issue -
 162                  * Set UTMI_IVREF from 0x4a3 to 0x4bf */
 163                 u2o_write(base, UTMI_IVREF, 0x4bf);
 164
 165         /* toggle VCOCAL_START bit of UTMI_PLL */
 166         udelay(200);
 167         u2o_set(base, UTMI_PLL, VCOCAL_START);
 168         udelay(40);
 169         u2o_clear(base, UTMI_PLL, VCOCAL_START);
 170
 171         /* toggle REG_RCAL_START bit of UTMI_TX */
 172         udelay(400);
 173         u2o_set(base, UTMI_TX, REG_RCAL_START);
 174         udelay(40);
 175         u2o_clear(base, UTMI_TX, REG_RCAL_START);
 176         udelay(400);
 177
 178         /* Make sure PHY PLL is ready */
 179         loops = 0;
 180         while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
 181                 mdelay(1);
 182                 loops++;
 183                 if (loops > 100) {
 184                         printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
 185                                 u2o_get(base, UTMI_PLL));
 186                         break;
 187                 }
 188         }
 189
 190         if (cpu_is_pxa168()) {
 191                 u2o_set(base, UTMI_RESERVE, 1 << 5);
 192                 /* Turn on UTMI PHY OTG extension */
 193                 u2o_write(base, UTMI_OTG_ADDON, 1);
 194         }
 195
 196         return 0;
 197 }
 198
 199 static int usb_phy_deinit_internal(void __iomem *base)
 200 {
 201         pr_info("Deinit usb phy!!!\n");
 202
 203         if (cpu_is_pxa168())
 204                 u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
 205
 206         u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
 207         u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
 208         u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
 209         u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
 210         u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
 211
 212         return 0;
 213 }
 214
 215 int pxa_usb_phy_init(void __iomem *phy_reg)
 216 {
 217         mutex_lock(&phy_lock);
 218         if (phy_init_cnt++ == 0)
 219                 usb_phy_init_internal(phy_reg);
 220         mutex_unlock(&phy_lock);
 221         return 0;
 222 }
 223
 224 void pxa_usb_phy_deinit(void __iomem *phy_reg)
 225 {
 226         WARN_ON(phy_init_cnt == 0);
 227
 228         mutex_lock(&phy_lock);
 229         if (--phy_init_cnt == 0)
 230                 usb_phy_deinit_internal(phy_reg);
 231         mutex_unlock(&phy_lock);
 232 }
 233 #endif
 234 #endif
 235 #endif
 236
 237 #if IS_ENABLED(CONFIG_USB_SUPPORT)
 238 static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 239
 240 #if IS_ENABLED(CONFIG_PHY_PXA_USB)
 241 struct resource pxa168_usb_phy_resources[] = {
 242         [0] = {
 243                 .start  = PXA168_U2O_PHYBASE,
 244                 .end    = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
 245                 .flags  = IORESOURCE_MEM,
 246         },
 247 };
 248
 249 struct platform_device pxa168_device_usb_phy = {
 250         .name           = "pxa-usb-phy",
 251         .id             = -1,
 252         .resource       = pxa168_usb_phy_resources,
 253         .num_resources  = ARRAY_SIZE(pxa168_usb_phy_resources),
 254         .dev            =  {
 255                 .dma_mask       = &usb_dma_mask,
 256                 .coherent_dma_mask = 0xffffffff,
 257         }
 258 };
 259 #endif /* CONFIG_PHY_PXA_USB */
 260
 261 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 262 struct resource pxa168_u2o_resources[] = {
 263         /* regbase */
 264         [0] = {
 265                 .start  = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
 266                 .end    = PXA168_U2O_REGBASE + USB_REG_RANGE,
 267                 .flags  = IORESOURCE_MEM,
 268                 .name   = "capregs",
 269         },
 270         /* phybase */
 271         [1] = {
 272                 .start  = PXA168_U2O_PHYBASE,
 273                 .end    = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
 274                 .flags  = IORESOURCE_MEM,
 275                 .name   = "phyregs",
 276         },
 277         [2] = {
 278                 .start  = IRQ_PXA168_USB1,
 279                 .end    = IRQ_PXA168_USB1,
 280                 .flags  = IORESOURCE_IRQ,
 281         },
 282 };
 283
 284 struct platform_device pxa168_device_u2o = {
 285         .name           = "mv-udc",
 286         .id             = -1,
 287         .resource       = pxa168_u2o_resources,
 288         .num_resources  = ARRAY_SIZE(pxa168_u2o_resources),
 289         .dev            =  {
 290                 .dma_mask       = &usb_dma_mask,
 291                 .coherent_dma_mask = 0xffffffff,
 292         }
 293 };
 294 #endif /* CONFIG_USB_MV_UDC */
 295
 296 #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 297 struct resource pxa168_u2oehci_resources[] = {
 298         [0] = {
 299                 .start  = PXA168_U2O_REGBASE,
 300                 .end    = PXA168_U2O_REGBASE + USB_REG_RANGE,
 301                 .flags  = IORESOURCE_MEM,
 302         },
 303         [1] = {
 304                 .start  = IRQ_PXA168_USB1,
 305                 .end    = IRQ_PXA168_USB1,
 306                 .flags  = IORESOURCE_IRQ,
 307         },
 308 };
 309
 310 struct platform_device pxa168_device_u2oehci = {
 311         .name           = "pxa-u2oehci",
 312         .id             = -1,
 313         .dev            = {
 314                 .dma_mask               = &usb_dma_mask,
 315                 .coherent_dma_mask      = 0xffffffff,
 316         },
 317
 318         .num_resources  = ARRAY_SIZE(pxa168_u2oehci_resources),
 319         .resource       = pxa168_u2oehci_resources,
 320 };
 321 #endif
 322
 323 #if IS_ENABLED(CONFIG_USB_MV_OTG)
 324 struct resource pxa168_u2ootg_resources[] = {
 325         /* regbase */
 326         [0] = {
 327                 .start  = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
 328                 .end    = PXA168_U2O_REGBASE + USB_REG_RANGE,
 329                 .flags  = IORESOURCE_MEM,
 330                 .name   = "capregs",
 331         },
 332         /* phybase */
 333         [1] = {
 334                 .start  = PXA168_U2O_PHYBASE,
 335                 .end    = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
 336                 .flags  = IORESOURCE_MEM,
 337                 .name   = "phyregs",
 338         },
 339         [2] = {
 340                 .start  = IRQ_PXA168_USB1,
 341                 .end    = IRQ_PXA168_USB1,
 342                 .flags  = IORESOURCE_IRQ,
 343         },
 344 };
 345
 346 struct platform_device pxa168_device_u2ootg = {
 347         .name           = "mv-otg",
 348         .id             = -1,
 349         .dev  = {
 350                 .dma_mask          = &usb_dma_mask,
 351                 .coherent_dma_mask = 0xffffffff,
 352         },
 353
 354         .num_resources  = ARRAY_SIZE(pxa168_u2ootg_resources),
 355         .resource      = pxa168_u2ootg_resources,
 356 };
 357 #endif /* CONFIG_USB_MV_OTG */
 358
 359 #endif