1 menu "Atmel Non-DT world"
3 config HAVE_AT91_DATAFLASH_CARD
7 prompt "Atmel AT91 Processor Devices for non DT boards"
8 depends on !ARCH_AT91X40
13 config ARCH_AT91RM9200
16 select AT91_USE_OLD_CLK
19 config ARCH_AT91SAM9260
20 bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
21 select SOC_AT91SAM9260
22 select AT91_USE_OLD_CLK
25 config ARCH_AT91SAM9261
26 bool "AT91SAM9261 or AT91SAM9G10"
27 select SOC_AT91SAM9261
28 select AT91_USE_OLD_CLK
31 config ARCH_AT91SAM9263
33 select SOC_AT91SAM9263
34 select AT91_USE_OLD_CLK
37 config ARCH_AT91SAM9RL
40 select AT91_USE_OLD_CLK
43 config ARCH_AT91SAM9G45
45 select SOC_AT91SAM9G45
46 select AT91_USE_OLD_CLK
51 config ARCH_AT91SAM9G20
53 select ARCH_AT91SAM9260
55 config ARCH_AT91SAM9G10
57 select ARCH_AT91SAM9261
59 # ----------------------------------------------------------
63 comment "AT91RM9200 Board Type"
66 bool "Ajeco 1ARM Single Board Computer"
68 Select this if you are using Ajeco's 1ARM Single Board Computer.
69 <http://www.ajeco.fi/>
71 config MACH_AT91RM9200EK
72 bool "Atmel AT91RM9200-EK Evaluation Kit"
73 select HAVE_AT91_DATAFLASH_CARD
75 Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
76 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
81 Select this if you are using Cogent's CSB337 board.
82 <http://www.cogcomp.com/csb_csb337.htm>
87 Select this if you are using Cogent's CSB637 board.
88 <http://www.cogcomp.com/csb_csb637.htm>
91 bool "Conitec ARM&EVA"
93 Select this if you are using Conitec's AT91RM9200-MCU-Module.
94 <http://www.conitec.net/english/linuxboard.php>
97 bool "Embest ATEB9200"
99 Select this if you are using Embest's ATEB9200 board.
100 <http://www.embedinfo.com/english/product/ATEB9200.asp>
103 bool "KwikByte KB920x"
105 Select this if you are using KwikByte's KB920x board.
106 <http://www.kwikbyte.com/KB9202.html>
108 config MACH_PICOTUX2XX
111 Select this if you are using a picotux 200.
112 <http://www.picotux.com/>
115 bool "Sperry-Sun KAFA board"
117 Select this if you are using Sperry-Sun's KAFA board.
120 bool "emQbit ECB_AT91 SBC"
121 select HAVE_AT91_DATAFLASH_CARD
123 Select this if you are using emQbit's ECB_AT91 board.
124 <http://wiki.emqbit.com/free-ecb-at91>
127 bool "ucDragon YL-9200"
129 Select this if you are using the ucDragon YL-9200 board.
132 bool "Eukrea CPUAT91"
134 Select this if you are using the Eukrea Electromatique's
135 CPUAT91 board <http://www.eukrea.com/>.
140 Select this if you are using the eco920 board
143 # ----------------------------------------------------------
147 comment "AT91SAM9260 Variants"
149 comment "AT91SAM9260 / AT91SAM9XE Board Type"
151 config MACH_AT91SAM9260EK
152 bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
153 select HAVE_AT91_DATAFLASH_CARD
155 Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
156 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
159 bool "KwikByte KB9260 (CAM60) board"
161 Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
162 <http://www.kwikbyte.com/KB9260.html>
164 config MACH_SAM9_L9260
165 bool "Olimex SAM9-L9260 board"
166 select HAVE_AT91_DATAFLASH_CARD
168 Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
169 <http://www.olimex.com/dev/sam9-L9260.html>
172 bool "Custom afeb9260 board v1"
174 Select this if you are using custom afeb9260 board based on
175 open hardware design. Select this for revision 1 of the board.
176 <svn://194.85.238.22/home/users/george/svn/arm9eb>
177 <http://groups.google.com/group/arm9fpga-evolution-board>
180 bool "Eukrea CPU9260 board"
182 Select this if you are using a Eukrea Electromatique's
183 CPU9260 Board <http://www.eukrea.com/>
185 config MACH_FLEXIBITY
186 bool "Flexibity Connect board"
188 Select this if you are using Flexibity Connect board
189 <http://www.flexibity.com>
191 comment "AT91SAM9G20 Board Type"
193 config MACH_AT91SAM9G20EK
194 bool "Atmel AT91SAM9G20-EK Evaluation Kit"
195 select HAVE_AT91_DATAFLASH_CARD
197 Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
198 that embeds only one SD/MMC slot.
200 config MACH_AT91SAM9G20EK_2MMC
201 depends on MACH_AT91SAM9G20EK
202 bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
204 Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
205 with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
207 <http://www.atmel.com/tools/SAM9G20-EK.aspx>
210 bool "Eukrea CPU9G20 board"
212 Select this if you are using a Eukrea Electromatique's
213 CPU9G20 Board <http://www.eukrea.com/>
215 config MACH_PORTUXG20
216 bool "taskit PortuxG20"
218 Select this if you are using taskit's PortuxG20.
219 <http://www.taskit.de/en/>
221 config MACH_STAMP9G20
222 bool "taskit Stamp9G20 CPU module"
224 Select this if you are using taskit's Stamp9G20 CPU module on its
226 <http://www.taskit.de/en/>
228 config MACH_PCONTROL_G20
229 bool "PControl G20 CPU module"
231 Select this if you are using taskit's Stamp9G20 CPU module on this
232 carrier board, being the decentralized unit of a building automation
233 system; featuring nvram, eth-switch, iso-rs485, display, io
236 bool "GS_IA18_S board"
238 This enables support for the GS_IA18_S board
239 produced by GeoSIG Ltd company. This is an internet accelerograph.
240 <http://www.geosig.com>
242 config MACH_SNAPPER_9260
243 bool "Bluewater Systems Snapper 9260/9G20 module"
245 Select this if you are using the Bluewater Systems Snapper 9260 or
246 Snapper 9G20 modules.
247 <http://www.bluewatersys.com/>
250 # ----------------------------------------------------------
254 comment "AT91SAM9261 Board Type"
256 config MACH_AT91SAM9261EK
257 bool "Atmel AT91SAM9261-EK Evaluation Kit"
258 select HAVE_AT91_DATAFLASH_CARD
260 Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
261 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
263 comment "AT91SAM9G10 Board Type"
265 config MACH_AT91SAM9G10EK
266 bool "Atmel AT91SAM9G10-EK Evaluation Kit"
267 select HAVE_AT91_DATAFLASH_CARD
269 Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
270 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
274 # ----------------------------------------------------------
278 comment "AT91SAM9263 Board Type"
280 config MACH_AT91SAM9263EK
281 bool "Atmel AT91SAM9263-EK Evaluation Kit"
282 select HAVE_AT91_DATAFLASH_CARD
284 Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
285 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
289 # ----------------------------------------------------------
293 comment "AT91SAM9RL Board Type"
295 config MACH_AT91SAM9RLEK
296 bool "Atmel AT91SAM9RL-EK Evaluation Kit"
298 Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
302 # ----------------------------------------------------------
306 comment "AT91SAM9G45 Board Type"
308 config MACH_AT91SAM9M10G45EK
309 bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
311 Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
312 Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
313 families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
314 <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
318 # ----------------------------------------------------------
322 comment "AT91X40 Board Type"
325 bool "Atmel AT91EB01 Evaluation Kit"
327 Select this if you are using Atmel's AT91EB01 Evaluation Kit.
328 It is also a popular target for simulators such as GDB's
329 ARM simulator (commonly known as the ARMulator) and the
334 # ----------------------------------------------------------
336 comment "AT91 Board Options"
338 config MTD_AT91_DATAFLASH_CARD
339 bool "Enable DataFlash Card support"
340 depends on HAVE_AT91_DATAFLASH_CARD
342 Enable support for the DataFlash card.