ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels
[linux-2.6-microblaze.git] / arch / arm / kernel / setup.c
1 /*
2  *  linux/arch/arm/kernel/setup.c
3  *
4  *  Copyright (C) 1995-2001 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 #include <linux/export.h>
11 #include <linux/kernel.h>
12 #include <linux/stddef.h>
13 #include <linux/ioport.h>
14 #include <linux/delay.h>
15 #include <linux/utsname.h>
16 #include <linux/initrd.h>
17 #include <linux/console.h>
18 #include <linux/bootmem.h>
19 #include <linux/seq_file.h>
20 #include <linux/screen_info.h>
21 #include <linux/init.h>
22 #include <linux/kexec.h>
23 #include <linux/of_fdt.h>
24 #include <linux/cpu.h>
25 #include <linux/interrupt.h>
26 #include <linux/smp.h>
27 #include <linux/proc_fs.h>
28 #include <linux/memblock.h>
29 #include <linux/bug.h>
30 #include <linux/compiler.h>
31 #include <linux/sort.h>
32
33 #include <asm/unified.h>
34 #include <asm/cp15.h>
35 #include <asm/cpu.h>
36 #include <asm/cputype.h>
37 #include <asm/elf.h>
38 #include <asm/procinfo.h>
39 #include <asm/sections.h>
40 #include <asm/setup.h>
41 #include <asm/smp_plat.h>
42 #include <asm/mach-types.h>
43 #include <asm/cacheflush.h>
44 #include <asm/cachetype.h>
45 #include <asm/tlbflush.h>
46
47 #include <asm/prom.h>
48 #include <asm/mach/arch.h>
49 #include <asm/mach/irq.h>
50 #include <asm/mach/time.h>
51 #include <asm/system_info.h>
52 #include <asm/system_misc.h>
53 #include <asm/traps.h>
54 #include <asm/unwind.h>
55 #include <asm/memblock.h>
56
57 #include "atags.h"
58 #include "tcm.h"
59
60
61 #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
62 char fpe_type[8];
63
64 static int __init fpe_setup(char *line)
65 {
66         memcpy(fpe_type, line, 8);
67         return 1;
68 }
69
70 __setup("fpe=", fpe_setup);
71 #endif
72
73 extern void paging_init(struct machine_desc *desc);
74 extern void sanity_check_meminfo(void);
75 extern void reboot_setup(char *str);
76 extern void setup_dma_zone(struct machine_desc *desc);
77
78 unsigned int processor_id;
79 EXPORT_SYMBOL(processor_id);
80 unsigned int __machine_arch_type __read_mostly;
81 EXPORT_SYMBOL(__machine_arch_type);
82 unsigned int cacheid __read_mostly;
83 EXPORT_SYMBOL(cacheid);
84
85 unsigned int __atags_pointer __initdata;
86
87 unsigned int system_rev;
88 EXPORT_SYMBOL(system_rev);
89
90 unsigned int system_serial_low;
91 EXPORT_SYMBOL(system_serial_low);
92
93 unsigned int system_serial_high;
94 EXPORT_SYMBOL(system_serial_high);
95
96 unsigned int elf_hwcap __read_mostly;
97 EXPORT_SYMBOL(elf_hwcap);
98
99
100 #ifdef MULTI_CPU
101 struct processor processor __read_mostly;
102 #endif
103 #ifdef MULTI_TLB
104 struct cpu_tlb_fns cpu_tlb __read_mostly;
105 #endif
106 #ifdef MULTI_USER
107 struct cpu_user_fns cpu_user __read_mostly;
108 #endif
109 #ifdef MULTI_CACHE
110 struct cpu_cache_fns cpu_cache __read_mostly;
111 #endif
112 #ifdef CONFIG_OUTER_CACHE
113 struct outer_cache_fns outer_cache __read_mostly;
114 EXPORT_SYMBOL(outer_cache);
115 #endif
116
117 /*
118  * Cached cpu_architecture() result for use by assembler code.
119  * C code should use the cpu_architecture() function instead of accessing this
120  * variable directly.
121  */
122 int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN;
123
124 struct stack {
125         u32 irq[3];
126         u32 abt[3];
127         u32 und[3];
128 } ____cacheline_aligned;
129
130 static struct stack stacks[NR_CPUS];
131
132 char elf_platform[ELF_PLATFORM_SIZE];
133 EXPORT_SYMBOL(elf_platform);
134
135 static const char *cpu_name;
136 static const char *machine_name;
137 static char __initdata cmd_line[COMMAND_LINE_SIZE];
138 struct machine_desc *machine_desc __initdata;
139
140 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
141 #define ENDIANNESS ((char)endian_test.l)
142
143 DEFINE_PER_CPU(struct cpuinfo_arm, cpu_data);
144
145 /*
146  * Standard memory resources
147  */
148 static struct resource mem_res[] = {
149         {
150                 .name = "Video RAM",
151                 .start = 0,
152                 .end = 0,
153                 .flags = IORESOURCE_MEM
154         },
155         {
156                 .name = "Kernel code",
157                 .start = 0,
158                 .end = 0,
159                 .flags = IORESOURCE_MEM
160         },
161         {
162                 .name = "Kernel data",
163                 .start = 0,
164                 .end = 0,
165                 .flags = IORESOURCE_MEM
166         }
167 };
168
169 #define video_ram   mem_res[0]
170 #define kernel_code mem_res[1]
171 #define kernel_data mem_res[2]
172
173 static struct resource io_res[] = {
174         {
175                 .name = "reserved",
176                 .start = 0x3bc,
177                 .end = 0x3be,
178                 .flags = IORESOURCE_IO | IORESOURCE_BUSY
179         },
180         {
181                 .name = "reserved",
182                 .start = 0x378,
183                 .end = 0x37f,
184                 .flags = IORESOURCE_IO | IORESOURCE_BUSY
185         },
186         {
187                 .name = "reserved",
188                 .start = 0x278,
189                 .end = 0x27f,
190                 .flags = IORESOURCE_IO | IORESOURCE_BUSY
191         }
192 };
193
194 #define lp0 io_res[0]
195 #define lp1 io_res[1]
196 #define lp2 io_res[2]
197
198 static const char *proc_arch[] = {
199         "undefined/unknown",
200         "3",
201         "4",
202         "4T",
203         "5",
204         "5T",
205         "5TE",
206         "5TEJ",
207         "6TEJ",
208         "7",
209         "?(11)",
210         "?(12)",
211         "?(13)",
212         "?(14)",
213         "?(15)",
214         "?(16)",
215         "?(17)",
216 };
217
218 static int __get_cpu_architecture(void)
219 {
220         int cpu_arch;
221
222         if ((read_cpuid_id() & 0x0008f000) == 0) {
223                 cpu_arch = CPU_ARCH_UNKNOWN;
224         } else if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
225                 cpu_arch = (read_cpuid_id() & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
226         } else if ((read_cpuid_id() & 0x00080000) == 0x00000000) {
227                 cpu_arch = (read_cpuid_id() >> 16) & 7;
228                 if (cpu_arch)
229                         cpu_arch += CPU_ARCH_ARMv3;
230         } else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
231                 unsigned int mmfr0;
232
233                 /* Revised CPUID format. Read the Memory Model Feature
234                  * Register 0 and check for VMSAv7 or PMSAv7 */
235                 asm("mrc        p15, 0, %0, c0, c1, 4"
236                     : "=r" (mmfr0));
237                 if ((mmfr0 & 0x0000000f) >= 0x00000003 ||
238                     (mmfr0 & 0x000000f0) >= 0x00000030)
239                         cpu_arch = CPU_ARCH_ARMv7;
240                 else if ((mmfr0 & 0x0000000f) == 0x00000002 ||
241                          (mmfr0 & 0x000000f0) == 0x00000020)
242                         cpu_arch = CPU_ARCH_ARMv6;
243                 else
244                         cpu_arch = CPU_ARCH_UNKNOWN;
245         } else
246                 cpu_arch = CPU_ARCH_UNKNOWN;
247
248         return cpu_arch;
249 }
250
251 int __pure cpu_architecture(void)
252 {
253         BUG_ON(__cpu_architecture == CPU_ARCH_UNKNOWN);
254
255         return __cpu_architecture;
256 }
257
258 static int cpu_has_aliasing_icache(unsigned int arch)
259 {
260         int aliasing_icache;
261         unsigned int id_reg, num_sets, line_size;
262
263         /* PIPT caches never alias. */
264         if (icache_is_pipt())
265                 return 0;
266
267         /* arch specifies the register format */
268         switch (arch) {
269         case CPU_ARCH_ARMv7:
270                 asm("mcr        p15, 2, %0, c0, c0, 0 @ set CSSELR"
271                     : /* No output operands */
272                     : "r" (1));
273                 isb();
274                 asm("mrc        p15, 1, %0, c0, c0, 0 @ read CCSIDR"
275                     : "=r" (id_reg));
276                 line_size = 4 << ((id_reg & 0x7) + 2);
277                 num_sets = ((id_reg >> 13) & 0x7fff) + 1;
278                 aliasing_icache = (line_size * num_sets) > PAGE_SIZE;
279                 break;
280         case CPU_ARCH_ARMv6:
281                 aliasing_icache = read_cpuid_cachetype() & (1 << 11);
282                 break;
283         default:
284                 /* I-cache aliases will be handled by D-cache aliasing code */
285                 aliasing_icache = 0;
286         }
287
288         return aliasing_icache;
289 }
290
291 static void __init cacheid_init(void)
292 {
293         unsigned int cachetype = read_cpuid_cachetype();
294         unsigned int arch = cpu_architecture();
295
296         if (arch >= CPU_ARCH_ARMv6) {
297                 if ((cachetype & (7 << 29)) == 4 << 29) {
298                         /* ARMv7 register format */
299                         arch = CPU_ARCH_ARMv7;
300                         cacheid = CACHEID_VIPT_NONALIASING;
301                         switch (cachetype & (3 << 14)) {
302                         case (1 << 14):
303                                 cacheid |= CACHEID_ASID_TAGGED;
304                                 break;
305                         case (3 << 14):
306                                 cacheid |= CACHEID_PIPT;
307                                 break;
308                         }
309                 } else {
310                         arch = CPU_ARCH_ARMv6;
311                         if (cachetype & (1 << 23))
312                                 cacheid = CACHEID_VIPT_ALIASING;
313                         else
314                                 cacheid = CACHEID_VIPT_NONALIASING;
315                 }
316                 if (cpu_has_aliasing_icache(arch))
317                         cacheid |= CACHEID_VIPT_I_ALIASING;
318         } else {
319                 cacheid = CACHEID_VIVT;
320         }
321
322         printk("CPU: %s data cache, %s instruction cache\n",
323                 cache_is_vivt() ? "VIVT" :
324                 cache_is_vipt_aliasing() ? "VIPT aliasing" :
325                 cache_is_vipt_nonaliasing() ? "PIPT / VIPT nonaliasing" : "unknown",
326                 cache_is_vivt() ? "VIVT" :
327                 icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
328                 icache_is_vipt_aliasing() ? "VIPT aliasing" :
329                 icache_is_pipt() ? "PIPT" :
330                 cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
331 }
332
333 /*
334  * These functions re-use the assembly code in head.S, which
335  * already provide the required functionality.
336  */
337 extern struct proc_info_list *lookup_processor_type(unsigned int);
338
339 void __init early_print(const char *str, ...)
340 {
341         extern void printascii(const char *);
342         char buf[256];
343         va_list ap;
344
345         va_start(ap, str);
346         vsnprintf(buf, sizeof(buf), str, ap);
347         va_end(ap);
348
349 #ifdef CONFIG_DEBUG_LL
350         printascii(buf);
351 #endif
352         printk("%s", buf);
353 }
354
355 static void __init feat_v6_fixup(void)
356 {
357         int id = read_cpuid_id();
358
359         if ((id & 0xff0f0000) != 0x41070000)
360                 return;
361
362         /*
363          * HWCAP_TLS is available only on 1136 r1p0 and later,
364          * see also kuser_get_tls_init.
365          */
366         if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0))
367                 elf_hwcap &= ~HWCAP_TLS;
368 }
369
370 /*
371  * cpu_init - initialise one CPU.
372  *
373  * cpu_init sets up the per-CPU stacks.
374  */
375 void cpu_init(void)
376 {
377         unsigned int cpu = smp_processor_id();
378         struct stack *stk = &stacks[cpu];
379
380         if (cpu >= NR_CPUS) {
381                 printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
382                 BUG();
383         }
384
385         cpu_proc_init();
386
387         /*
388          * Define the placement constraint for the inline asm directive below.
389          * In Thumb-2, msr with an immediate value is not allowed.
390          */
391 #ifdef CONFIG_THUMB2_KERNEL
392 #define PLC     "r"
393 #else
394 #define PLC     "I"
395 #endif
396
397         /*
398          * setup stacks for re-entrant exception handlers
399          */
400         __asm__ (
401         "msr    cpsr_c, %1\n\t"
402         "add    r14, %0, %2\n\t"
403         "mov    sp, r14\n\t"
404         "msr    cpsr_c, %3\n\t"
405         "add    r14, %0, %4\n\t"
406         "mov    sp, r14\n\t"
407         "msr    cpsr_c, %5\n\t"
408         "add    r14, %0, %6\n\t"
409         "mov    sp, r14\n\t"
410         "msr    cpsr_c, %7"
411             :
412             : "r" (stk),
413               PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
414               "I" (offsetof(struct stack, irq[0])),
415               PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
416               "I" (offsetof(struct stack, abt[0])),
417               PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
418               "I" (offsetof(struct stack, und[0])),
419               PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
420             : "r14");
421 }
422
423 int __cpu_logical_map[NR_CPUS];
424
425 void __init smp_setup_processor_id(void)
426 {
427         int i;
428         u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
429
430         cpu_logical_map(0) = cpu;
431         for (i = 1; i < NR_CPUS; ++i)
432                 cpu_logical_map(i) = i == cpu ? 0 : i;
433
434         printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
435 }
436
437 static void __init setup_processor(void)
438 {
439         struct proc_info_list *list;
440
441         /*
442          * locate processor in the list of supported processor
443          * types.  The linker builds this table for us from the
444          * entries in arch/arm/mm/proc-*.S
445          */
446         list = lookup_processor_type(read_cpuid_id());
447         if (!list) {
448                 printk("CPU configuration botched (ID %08x), unable "
449                        "to continue.\n", read_cpuid_id());
450                 while (1);
451         }
452
453         cpu_name = list->cpu_name;
454         __cpu_architecture = __get_cpu_architecture();
455
456 #ifdef MULTI_CPU
457         processor = *list->proc;
458 #endif
459 #ifdef MULTI_TLB
460         cpu_tlb = *list->tlb;
461 #endif
462 #ifdef MULTI_USER
463         cpu_user = *list->user;
464 #endif
465 #ifdef MULTI_CACHE
466         cpu_cache = *list->cache;
467 #endif
468
469         printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
470                cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
471                proc_arch[cpu_architecture()], cr_alignment);
472
473         snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
474                  list->arch_name, ENDIANNESS);
475         snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
476                  list->elf_name, ENDIANNESS);
477         elf_hwcap = list->elf_hwcap;
478 #ifndef CONFIG_ARM_THUMB
479         elf_hwcap &= ~HWCAP_THUMB;
480 #endif
481
482         feat_v6_fixup();
483
484         cacheid_init();
485         cpu_init();
486 }
487
488 void __init dump_machine_table(void)
489 {
490         struct machine_desc *p;
491
492         early_print("Available machine support:\n\nID (hex)\tNAME\n");
493         for_each_machine_desc(p)
494                 early_print("%08x\t%s\n", p->nr, p->name);
495
496         early_print("\nPlease check your kernel config and/or bootloader.\n");
497
498         while (true)
499                 /* can't use cpu_relax() here as it may require MMU setup */;
500 }
501
502 int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
503 {
504         struct membank *bank = &meminfo.bank[meminfo.nr_banks];
505
506         if (meminfo.nr_banks >= NR_BANKS) {
507                 printk(KERN_CRIT "NR_BANKS too low, "
508                         "ignoring memory at 0x%08llx\n", (long long)start);
509                 return -EINVAL;
510         }
511
512         /*
513          * Ensure that start/size are aligned to a page boundary.
514          * Size is appropriately rounded down, start is rounded up.
515          */
516         size -= start & ~PAGE_MASK;
517         bank->start = PAGE_ALIGN(start);
518
519 #ifndef CONFIG_LPAE
520         if (bank->start + size < bank->start) {
521                 printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
522                         "32-bit physical address space\n", (long long)start);
523                 /*
524                  * To ensure bank->start + bank->size is representable in
525                  * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
526                  * This means we lose a page after masking.
527                  */
528                 size = ULONG_MAX - bank->start;
529         }
530 #endif
531
532         bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
533
534         /*
535          * Check whether this memory region has non-zero size or
536          * invalid node number.
537          */
538         if (bank->size == 0)
539                 return -EINVAL;
540
541         meminfo.nr_banks++;
542         return 0;
543 }
544
545 /*
546  * Pick out the memory size.  We look for mem=size@start,
547  * where start and size are "size[KkMm]"
548  */
549 static int __init early_mem(char *p)
550 {
551         static int usermem __initdata = 0;
552         phys_addr_t size;
553         phys_addr_t start;
554         char *endp;
555
556         /*
557          * If the user specifies memory size, we
558          * blow away any automatically generated
559          * size.
560          */
561         if (usermem == 0) {
562                 usermem = 1;
563                 meminfo.nr_banks = 0;
564         }
565
566         start = PHYS_OFFSET;
567         size  = memparse(p, &endp);
568         if (*endp == '@')
569                 start = memparse(endp + 1, NULL);
570
571         arm_add_memory(start, size);
572
573         return 0;
574 }
575 early_param("mem", early_mem);
576
577 static void __init request_standard_resources(struct machine_desc *mdesc)
578 {
579         struct memblock_region *region;
580         struct resource *res;
581
582         kernel_code.start   = virt_to_phys(_text);
583         kernel_code.end     = virt_to_phys(_etext - 1);
584         kernel_data.start   = virt_to_phys(_sdata);
585         kernel_data.end     = virt_to_phys(_end - 1);
586
587         for_each_memblock(memory, region) {
588                 res = alloc_bootmem_low(sizeof(*res));
589                 res->name  = "System RAM";
590                 res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
591                 res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
592                 res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
593
594                 request_resource(&iomem_resource, res);
595
596                 if (kernel_code.start >= res->start &&
597                     kernel_code.end <= res->end)
598                         request_resource(res, &kernel_code);
599                 if (kernel_data.start >= res->start &&
600                     kernel_data.end <= res->end)
601                         request_resource(res, &kernel_data);
602         }
603
604         if (mdesc->video_start) {
605                 video_ram.start = mdesc->video_start;
606                 video_ram.end   = mdesc->video_end;
607                 request_resource(&iomem_resource, &video_ram);
608         }
609
610         /*
611          * Some machines don't have the possibility of ever
612          * possessing lp0, lp1 or lp2
613          */
614         if (mdesc->reserve_lp0)
615                 request_resource(&ioport_resource, &lp0);
616         if (mdesc->reserve_lp1)
617                 request_resource(&ioport_resource, &lp1);
618         if (mdesc->reserve_lp2)
619                 request_resource(&ioport_resource, &lp2);
620 }
621
622 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
623 struct screen_info screen_info = {
624  .orig_video_lines      = 30,
625  .orig_video_cols       = 80,
626  .orig_video_mode       = 0,
627  .orig_video_ega_bx     = 0,
628  .orig_video_isVGA      = 1,
629  .orig_video_points     = 8
630 };
631 #endif
632
633 static int __init customize_machine(void)
634 {
635         /* customizes platform devices, or adds new ones */
636         if (machine_desc->init_machine)
637                 machine_desc->init_machine();
638         return 0;
639 }
640 arch_initcall(customize_machine);
641
642 static int __init init_machine_late(void)
643 {
644         if (machine_desc->init_late)
645                 machine_desc->init_late();
646         return 0;
647 }
648 late_initcall(init_machine_late);
649
650 #ifdef CONFIG_KEXEC
651 static inline unsigned long long get_total_mem(void)
652 {
653         unsigned long total;
654
655         total = max_low_pfn - min_low_pfn;
656         return total << PAGE_SHIFT;
657 }
658
659 /**
660  * reserve_crashkernel() - reserves memory are for crash kernel
661  *
662  * This function reserves memory area given in "crashkernel=" kernel command
663  * line parameter. The memory reserved is used by a dump capture kernel when
664  * primary kernel is crashing.
665  */
666 static void __init reserve_crashkernel(void)
667 {
668         unsigned long long crash_size, crash_base;
669         unsigned long long total_mem;
670         int ret;
671
672         total_mem = get_total_mem();
673         ret = parse_crashkernel(boot_command_line, total_mem,
674                                 &crash_size, &crash_base);
675         if (ret)
676                 return;
677
678         ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
679         if (ret < 0) {
680                 printk(KERN_WARNING "crashkernel reservation failed - "
681                        "memory is in use (0x%lx)\n", (unsigned long)crash_base);
682                 return;
683         }
684
685         printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
686                "for crashkernel (System RAM: %ldMB)\n",
687                (unsigned long)(crash_size >> 20),
688                (unsigned long)(crash_base >> 20),
689                (unsigned long)(total_mem >> 20));
690
691         crashk_res.start = crash_base;
692         crashk_res.end = crash_base + crash_size - 1;
693         insert_resource(&iomem_resource, &crashk_res);
694 }
695 #else
696 static inline void reserve_crashkernel(void) {}
697 #endif /* CONFIG_KEXEC */
698
699 static int __init meminfo_cmp(const void *_a, const void *_b)
700 {
701         const struct membank *a = _a, *b = _b;
702         long cmp = bank_pfn_start(a) - bank_pfn_start(b);
703         return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
704 }
705
706 void __init setup_arch(char **cmdline_p)
707 {
708         struct machine_desc *mdesc;
709
710         setup_processor();
711         mdesc = setup_machine_fdt(__atags_pointer);
712         if (!mdesc)
713                 mdesc = setup_machine_tags(__atags_pointer, machine_arch_type);
714         machine_desc = mdesc;
715         machine_name = mdesc->name;
716
717         setup_dma_zone(mdesc);
718
719         if (mdesc->restart_mode)
720                 reboot_setup(&mdesc->restart_mode);
721
722         init_mm.start_code = (unsigned long) _text;
723         init_mm.end_code   = (unsigned long) _etext;
724         init_mm.end_data   = (unsigned long) _edata;
725         init_mm.brk        = (unsigned long) _end;
726
727         /* populate cmd_line too for later use, preserving boot_command_line */
728         strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
729         *cmdline_p = cmd_line;
730
731         parse_early_param();
732
733         sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
734         sanity_check_meminfo();
735         arm_memblock_init(&meminfo, mdesc);
736
737         paging_init(mdesc);
738         request_standard_resources(mdesc);
739
740         if (mdesc->restart)
741                 arm_pm_restart = mdesc->restart;
742
743         unflatten_device_tree();
744
745 #ifdef CONFIG_SMP
746         if (is_smp()) {
747                 smp_set_ops(mdesc->smp);
748                 smp_init_cpus();
749         }
750 #endif
751         reserve_crashkernel();
752
753         tcm_init();
754
755 #ifdef CONFIG_MULTI_IRQ_HANDLER
756         handle_arch_irq = mdesc->handle_irq;
757 #endif
758
759 #ifdef CONFIG_VT
760 #if defined(CONFIG_VGA_CONSOLE)
761         conswitchp = &vga_con;
762 #elif defined(CONFIG_DUMMY_CONSOLE)
763         conswitchp = &dummy_con;
764 #endif
765 #endif
766
767         if (mdesc->init_early)
768                 mdesc->init_early();
769 }
770
771
772 static int __init topology_init(void)
773 {
774         int cpu;
775
776         for_each_possible_cpu(cpu) {
777                 struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu);
778                 cpuinfo->cpu.hotpluggable = 1;
779                 register_cpu(&cpuinfo->cpu, cpu);
780         }
781
782         return 0;
783 }
784 subsys_initcall(topology_init);
785
786 #ifdef CONFIG_HAVE_PROC_CPU
787 static int __init proc_cpu_init(void)
788 {
789         struct proc_dir_entry *res;
790
791         res = proc_mkdir("cpu", NULL);
792         if (!res)
793                 return -ENOMEM;
794         return 0;
795 }
796 fs_initcall(proc_cpu_init);
797 #endif
798
799 static const char *hwcap_str[] = {
800         "swp",
801         "half",
802         "thumb",
803         "26bit",
804         "fastmult",
805         "fpa",
806         "vfp",
807         "edsp",
808         "java",
809         "iwmmxt",
810         "crunch",
811         "thumbee",
812         "neon",
813         "vfpv3",
814         "vfpv3d16",
815         "tls",
816         "vfpv4",
817         "idiva",
818         "idivt",
819         NULL
820 };
821
822 static int c_show(struct seq_file *m, void *v)
823 {
824         int i;
825
826         seq_printf(m, "Processor\t: %s rev %d (%s)\n",
827                    cpu_name, read_cpuid_id() & 15, elf_platform);
828
829 #if defined(CONFIG_SMP)
830         for_each_online_cpu(i) {
831                 /*
832                  * glibc reads /proc/cpuinfo to determine the number of
833                  * online processors, looking for lines beginning with
834                  * "processor".  Give glibc what it expects.
835                  */
836                 seq_printf(m, "processor\t: %d\n", i);
837                 seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
838                            per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
839                            (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
840         }
841 #else /* CONFIG_SMP */
842         seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
843                    loops_per_jiffy / (500000/HZ),
844                    (loops_per_jiffy / (5000/HZ)) % 100);
845 #endif
846
847         /* dump out the processor features */
848         seq_puts(m, "Features\t: ");
849
850         for (i = 0; hwcap_str[i]; i++)
851                 if (elf_hwcap & (1 << i))
852                         seq_printf(m, "%s ", hwcap_str[i]);
853
854         seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
855         seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
856
857         if ((read_cpuid_id() & 0x0008f000) == 0x00000000) {
858                 /* pre-ARM7 */
859                 seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4);
860         } else {
861                 if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
862                         /* ARM7 */
863                         seq_printf(m, "CPU variant\t: 0x%02x\n",
864                                    (read_cpuid_id() >> 16) & 127);
865                 } else {
866                         /* post-ARM7 */
867                         seq_printf(m, "CPU variant\t: 0x%x\n",
868                                    (read_cpuid_id() >> 20) & 15);
869                 }
870                 seq_printf(m, "CPU part\t: 0x%03x\n",
871                            (read_cpuid_id() >> 4) & 0xfff);
872         }
873         seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
874
875         seq_puts(m, "\n");
876
877         seq_printf(m, "Hardware\t: %s\n", machine_name);
878         seq_printf(m, "Revision\t: %04x\n", system_rev);
879         seq_printf(m, "Serial\t\t: %08x%08x\n",
880                    system_serial_high, system_serial_low);
881
882         return 0;
883 }
884
885 static void *c_start(struct seq_file *m, loff_t *pos)
886 {
887         return *pos < 1 ? (void *)1 : NULL;
888 }
889
890 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
891 {
892         ++*pos;
893         return NULL;
894 }
895
896 static void c_stop(struct seq_file *m, void *v)
897 {
898 }
899
900 const struct seq_operations cpuinfo_op = {
901         .start  = c_start,
902         .next   = c_next,
903         .stop   = c_stop,
904         .show   = c_show
905 };