Linux 6.9-rc1
[linux-2.6-microblaze.git] / arch / arm / common / sa1111.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * linux/arch/arm/common/sa1111.c
4  *
5  * SA1111 support
6  *
7  * Original code by John Dorsey
8  *
9  * This file contains all generic SA1111 support.
10  *
11  * All initialization functions provided here are intended to be called
12  * from machine specific code with proper arguments when required.
13  */
14 #include <linux/module.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/init.h>
17 #include <linux/irq.h>
18 #include <linux/kernel.h>
19 #include <linux/delay.h>
20 #include <linux/errno.h>
21 #include <linux/ioport.h>
22 #include <linux/platform_device.h>
23 #include <linux/slab.h>
24 #include <linux/spinlock.h>
25 #include <linux/dma-map-ops.h>
26 #include <linux/clk.h>
27 #include <linux/io.h>
28
29 #include <asm/mach/irq.h>
30 #include <asm/mach-types.h>
31 #include <linux/sizes.h>
32
33 #include <asm/hardware/sa1111.h>
34
35 #ifdef CONFIG_ARCH_SA1100
36 #include <mach/hardware.h>
37 #endif
38
39 /* SA1111 IRQs */
40 #define IRQ_GPAIN0              (0)
41 #define IRQ_GPAIN1              (1)
42 #define IRQ_GPAIN2              (2)
43 #define IRQ_GPAIN3              (3)
44 #define IRQ_GPBIN0              (4)
45 #define IRQ_GPBIN1              (5)
46 #define IRQ_GPBIN2              (6)
47 #define IRQ_GPBIN3              (7)
48 #define IRQ_GPBIN4              (8)
49 #define IRQ_GPBIN5              (9)
50 #define IRQ_GPCIN0              (10)
51 #define IRQ_GPCIN1              (11)
52 #define IRQ_GPCIN2              (12)
53 #define IRQ_GPCIN3              (13)
54 #define IRQ_GPCIN4              (14)
55 #define IRQ_GPCIN5              (15)
56 #define IRQ_GPCIN6              (16)
57 #define IRQ_GPCIN7              (17)
58 #define IRQ_MSTXINT             (18)
59 #define IRQ_MSRXINT             (19)
60 #define IRQ_MSSTOPERRINT        (20)
61 #define IRQ_TPTXINT             (21)
62 #define IRQ_TPRXINT             (22)
63 #define IRQ_TPSTOPERRINT        (23)
64 #define SSPXMTINT               (24)
65 #define SSPRCVINT               (25)
66 #define SSPROR                  (26)
67 #define AUDXMTDMADONEA          (32)
68 #define AUDRCVDMADONEA          (33)
69 #define AUDXMTDMADONEB          (34)
70 #define AUDRCVDMADONEB          (35)
71 #define AUDTFSR                 (36)
72 #define AUDRFSR                 (37)
73 #define AUDTUR                  (38)
74 #define AUDROR                  (39)
75 #define AUDDTS                  (40)
76 #define AUDRDD                  (41)
77 #define AUDSTO                  (42)
78 #define IRQ_USBPWR              (43)
79 #define IRQ_HCIM                (44)
80 #define IRQ_HCIBUFFACC          (45)
81 #define IRQ_HCIRMTWKP           (46)
82 #define IRQ_NHCIMFCIR           (47)
83 #define IRQ_USB_PORT_RESUME     (48)
84 #define IRQ_S0_READY_NINT       (49)
85 #define IRQ_S1_READY_NINT       (50)
86 #define IRQ_S0_CD_VALID         (51)
87 #define IRQ_S1_CD_VALID         (52)
88 #define IRQ_S0_BVD1_STSCHG      (53)
89 #define IRQ_S1_BVD1_STSCHG      (54)
90 #define SA1111_IRQ_NR           (55)
91
92 extern void sa1110_mb_enable(void);
93 extern void sa1110_mb_disable(void);
94
95 /*
96  * We keep the following data for the overall SA1111.  Note that the
97  * struct device and struct resource are "fake"; they should be supplied
98  * by the bus above us.  However, in the interests of getting all SA1111
99  * drivers converted over to the device model, we provide this as an
100  * anchor point for all the other drivers.
101  */
102 struct sa1111 {
103         struct device   *dev;
104         struct clk      *clk;
105         unsigned long   phys;
106         int             irq;
107         int             irq_base;       /* base for cascaded on-chip IRQs */
108         spinlock_t      lock;
109         void __iomem    *base;
110         struct sa1111_platform_data *pdata;
111         struct irq_domain *irqdomain;
112         struct gpio_chip gc;
113 #ifdef CONFIG_PM
114         void            *saved_state;
115 #endif
116 };
117
118 /*
119  * We _really_ need to eliminate this.  Its only users
120  * are the PWM and DMA checking code.
121  */
122 static struct sa1111 *g_sa1111;
123
124 struct sa1111_dev_info {
125         unsigned long   offset;
126         unsigned long   skpcr_mask;
127         bool            dma;
128         unsigned int    devid;
129         unsigned int    hwirq[6];
130 };
131
132 static struct sa1111_dev_info sa1111_devices[] = {
133         {
134                 .offset         = SA1111_USB,
135                 .skpcr_mask     = SKPCR_UCLKEN,
136                 .dma            = true,
137                 .devid          = SA1111_DEVID_USB,
138                 .hwirq = {
139                         IRQ_USBPWR,
140                         IRQ_HCIM,
141                         IRQ_HCIBUFFACC,
142                         IRQ_HCIRMTWKP,
143                         IRQ_NHCIMFCIR,
144                         IRQ_USB_PORT_RESUME
145                 },
146         },
147         {
148                 .offset         = 0x0600,
149                 .skpcr_mask     = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
150                 .dma            = true,
151                 .devid          = SA1111_DEVID_SAC,
152                 .hwirq = {
153                         AUDXMTDMADONEA,
154                         AUDXMTDMADONEB,
155                         AUDRCVDMADONEA,
156                         AUDRCVDMADONEB
157                 },
158         },
159         {
160                 .offset         = 0x0800,
161                 .skpcr_mask     = SKPCR_SCLKEN,
162                 .devid          = SA1111_DEVID_SSP,
163         },
164         {
165                 .offset         = SA1111_KBD,
166                 .skpcr_mask     = SKPCR_PTCLKEN,
167                 .devid          = SA1111_DEVID_PS2_KBD,
168                 .hwirq = {
169                         IRQ_TPRXINT,
170                         IRQ_TPTXINT
171                 },
172         },
173         {
174                 .offset         = SA1111_MSE,
175                 .skpcr_mask     = SKPCR_PMCLKEN,
176                 .devid          = SA1111_DEVID_PS2_MSE,
177                 .hwirq = {
178                         IRQ_MSRXINT,
179                         IRQ_MSTXINT
180                 },
181         },
182         {
183                 .offset         = 0x1800,
184                 .skpcr_mask     = 0,
185                 .devid          = SA1111_DEVID_PCMCIA,
186                 .hwirq = {
187                         IRQ_S0_READY_NINT,
188                         IRQ_S0_CD_VALID,
189                         IRQ_S0_BVD1_STSCHG,
190                         IRQ_S1_READY_NINT,
191                         IRQ_S1_CD_VALID,
192                         IRQ_S1_BVD1_STSCHG,
193                 },
194         },
195 };
196
197 static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
198 {
199         return irq_create_mapping(sachip->irqdomain, hwirq);
200 }
201
202 /*
203  * SA1111 interrupt support.  Since clearing an IRQ while there are
204  * active IRQs causes the interrupt output to pulse, the upper levels
205  * will call us again if there are more interrupts to process.
206  */
207 static void sa1111_irq_handler(struct irq_desc *desc)
208 {
209         unsigned int stat0, stat1, i;
210         struct sa1111 *sachip = irq_desc_get_handler_data(desc);
211         struct irq_domain *irqdomain;
212         void __iomem *mapbase = sachip->base + SA1111_INTC;
213
214         stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
215         stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
216
217         writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
218
219         desc->irq_data.chip->irq_ack(&desc->irq_data);
220
221         writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
222
223         if (stat0 == 0 && stat1 == 0) {
224                 do_bad_IRQ(desc);
225                 return;
226         }
227
228         irqdomain = sachip->irqdomain;
229
230         for (i = 0; stat0; i++, stat0 >>= 1)
231                 if (stat0 & 1)
232                         generic_handle_domain_irq(irqdomain, i);
233
234         for (i = 32; stat1; i++, stat1 >>= 1)
235                 if (stat1 & 1)
236                         generic_handle_domain_irq(irqdomain, i);
237
238         /* For level-based interrupts */
239         desc->irq_data.chip->irq_unmask(&desc->irq_data);
240 }
241
242 static u32 sa1111_irqmask(struct irq_data *d)
243 {
244         return BIT(irqd_to_hwirq(d) & 31);
245 }
246
247 static int sa1111_irqbank(struct irq_data *d)
248 {
249         return (irqd_to_hwirq(d) / 32) * 4;
250 }
251
252 static void sa1111_ack_irq(struct irq_data *d)
253 {
254 }
255
256 static void sa1111_mask_irq(struct irq_data *d)
257 {
258         struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
259         void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
260         u32 ie;
261
262         ie = readl_relaxed(mapbase + SA1111_INTEN0);
263         ie &= ~sa1111_irqmask(d);
264         writel(ie, mapbase + SA1111_INTEN0);
265 }
266
267 static void sa1111_unmask_irq(struct irq_data *d)
268 {
269         struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
270         void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
271         u32 ie;
272
273         ie = readl_relaxed(mapbase + SA1111_INTEN0);
274         ie |= sa1111_irqmask(d);
275         writel_relaxed(ie, mapbase + SA1111_INTEN0);
276 }
277
278 /*
279  * Attempt to re-trigger the interrupt.  The SA1111 contains a register
280  * (INTSET) which claims to do this.  However, in practice no amount of
281  * manipulation of INTEN and INTSET guarantees that the interrupt will
282  * be triggered.  In fact, its very difficult, if not impossible to get
283  * INTSET to re-trigger the interrupt.
284  */
285 static int sa1111_retrigger_irq(struct irq_data *d)
286 {
287         struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
288         void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
289         u32 ip, mask = sa1111_irqmask(d);
290         int i;
291
292         ip = readl_relaxed(mapbase + SA1111_INTPOL0);
293         for (i = 0; i < 8; i++) {
294                 writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
295                 writel_relaxed(ip, mapbase + SA1111_INTPOL0);
296                 if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
297                         break;
298         }
299
300         if (i == 8) {
301                 pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
302                        d->irq);
303                 return 0;
304         }
305
306         return 1;
307 }
308
309 static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
310 {
311         struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
312         void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
313         u32 ip, mask = sa1111_irqmask(d);
314
315         if (flags == IRQ_TYPE_PROBE)
316                 return 0;
317
318         if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
319                 return -EINVAL;
320
321         ip = readl_relaxed(mapbase + SA1111_INTPOL0);
322         if (flags & IRQ_TYPE_EDGE_RISING)
323                 ip &= ~mask;
324         else
325                 ip |= mask;
326         writel_relaxed(ip, mapbase + SA1111_INTPOL0);
327         writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
328
329         return 0;
330 }
331
332 static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
333 {
334         struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
335         void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
336         u32 we, mask = sa1111_irqmask(d);
337
338         we = readl_relaxed(mapbase + SA1111_WAKEEN0);
339         if (on)
340                 we |= mask;
341         else
342                 we &= ~mask;
343         writel_relaxed(we, mapbase + SA1111_WAKEEN0);
344
345         return 0;
346 }
347
348 static struct irq_chip sa1111_irq_chip = {
349         .name           = "SA1111",
350         .irq_ack        = sa1111_ack_irq,
351         .irq_mask       = sa1111_mask_irq,
352         .irq_unmask     = sa1111_unmask_irq,
353         .irq_retrigger  = sa1111_retrigger_irq,
354         .irq_set_type   = sa1111_type_irq,
355         .irq_set_wake   = sa1111_wake_irq,
356 };
357
358 static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
359         irq_hw_number_t hwirq)
360 {
361         struct sa1111 *sachip = d->host_data;
362
363         /* Disallow unavailable interrupts */
364         if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
365                 return -EINVAL;
366
367         irq_set_chip_data(irq, sachip);
368         irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
369         irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
370
371         return 0;
372 }
373
374 static const struct irq_domain_ops sa1111_irqdomain_ops = {
375         .map = sa1111_irqdomain_map,
376         .xlate = irq_domain_xlate_twocell,
377 };
378
379 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
380 {
381         void __iomem *irqbase = sachip->base + SA1111_INTC;
382         int ret;
383
384         /*
385          * We're guaranteed that this region hasn't been taken.
386          */
387         request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
388
389         ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
390         if (ret <= 0) {
391                 dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
392                         SA1111_IRQ_NR, ret);
393                 if (ret == 0)
394                         ret = -EINVAL;
395                 return ret;
396         }
397
398         sachip->irq_base = ret;
399
400         /* disable all IRQs */
401         writel_relaxed(0, irqbase + SA1111_INTEN0);
402         writel_relaxed(0, irqbase + SA1111_INTEN1);
403         writel_relaxed(0, irqbase + SA1111_WAKEEN0);
404         writel_relaxed(0, irqbase + SA1111_WAKEEN1);
405
406         /*
407          * detect on rising edge.  Note: Feb 2001 Errata for SA1111
408          * specifies that S0ReadyInt and S1ReadyInt should be '1'.
409          */
410         writel_relaxed(0, irqbase + SA1111_INTPOL0);
411         writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
412                        BIT(IRQ_S1_READY_NINT & 31),
413                        irqbase + SA1111_INTPOL1);
414
415         /* clear all IRQs */
416         writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
417         writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
418
419         sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
420                                                   &sa1111_irqdomain_ops,
421                                                   sachip);
422         if (!sachip->irqdomain) {
423                 irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
424                 return -ENOMEM;
425         }
426
427         irq_domain_associate_many(sachip->irqdomain,
428                                   sachip->irq_base + IRQ_GPAIN0,
429                                   IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
430         irq_domain_associate_many(sachip->irqdomain,
431                                   sachip->irq_base + AUDXMTDMADONEA,
432                                   AUDXMTDMADONEA,
433                                   IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
434
435         /*
436          * Register SA1111 interrupt
437          */
438         irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
439         irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
440                                          sachip);
441
442         dev_info(sachip->dev, "Providing IRQ%u-%u\n",
443                 sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
444
445         return 0;
446 }
447
448 static void sa1111_remove_irq(struct sa1111 *sachip)
449 {
450         struct irq_domain *domain = sachip->irqdomain;
451         void __iomem *irqbase = sachip->base + SA1111_INTC;
452         int i;
453
454         /* disable all IRQs */
455         writel_relaxed(0, irqbase + SA1111_INTEN0);
456         writel_relaxed(0, irqbase + SA1111_INTEN1);
457         writel_relaxed(0, irqbase + SA1111_WAKEEN0);
458         writel_relaxed(0, irqbase + SA1111_WAKEEN1);
459
460         irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
461         for (i = 0; i < SA1111_IRQ_NR; i++)
462                 irq_dispose_mapping(irq_find_mapping(domain, i));
463         irq_domain_remove(domain);
464
465         release_mem_region(sachip->phys + SA1111_INTC, 512);
466 }
467
468 enum {
469         SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
470         SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
471         SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
472         SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
473         SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
474 };
475
476 static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
477 {
478         return container_of(gc, struct sa1111, gc);
479 }
480
481 static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
482 {
483         void __iomem *reg = sachip->base + SA1111_GPIO;
484
485         if (offset < 4)
486                 return reg + SA1111_GPIO_PADDR;
487         if (offset < 10)
488                 return reg + SA1111_GPIO_PBDDR;
489         if (offset < 18)
490                 return reg + SA1111_GPIO_PCDDR;
491         return NULL;
492 }
493
494 static u32 sa1111_gpio_map_bit(unsigned offset)
495 {
496         if (offset < 4)
497                 return BIT(offset);
498         if (offset < 10)
499                 return BIT(offset - 4);
500         if (offset < 18)
501                 return BIT(offset - 10);
502         return 0;
503 }
504
505 static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
506 {
507         u32 val;
508
509         val = readl_relaxed(reg);
510         val &= ~mask;
511         val |= mask & set;
512         writel_relaxed(val, reg);
513 }
514
515 static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
516 {
517         struct sa1111 *sachip = gc_to_sa1111(gc);
518         void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
519         u32 mask = sa1111_gpio_map_bit(offset);
520
521         return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
522 }
523
524 static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
525 {
526         struct sa1111 *sachip = gc_to_sa1111(gc);
527         unsigned long flags;
528         void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
529         u32 mask = sa1111_gpio_map_bit(offset);
530
531         spin_lock_irqsave(&sachip->lock, flags);
532         sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
533         sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
534         spin_unlock_irqrestore(&sachip->lock, flags);
535
536         return 0;
537 }
538
539 static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
540         int value)
541 {
542         struct sa1111 *sachip = gc_to_sa1111(gc);
543         unsigned long flags;
544         void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
545         u32 mask = sa1111_gpio_map_bit(offset);
546
547         spin_lock_irqsave(&sachip->lock, flags);
548         sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
549         sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
550         sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
551         sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
552         spin_unlock_irqrestore(&sachip->lock, flags);
553
554         return 0;
555 }
556
557 static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
558 {
559         struct sa1111 *sachip = gc_to_sa1111(gc);
560         void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
561         u32 mask = sa1111_gpio_map_bit(offset);
562
563         return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
564 }
565
566 static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
567 {
568         struct sa1111 *sachip = gc_to_sa1111(gc);
569         unsigned long flags;
570         void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
571         u32 mask = sa1111_gpio_map_bit(offset);
572
573         spin_lock_irqsave(&sachip->lock, flags);
574         sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
575         sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
576         spin_unlock_irqrestore(&sachip->lock, flags);
577 }
578
579 static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
580         unsigned long *bits)
581 {
582         struct sa1111 *sachip = gc_to_sa1111(gc);
583         unsigned long flags;
584         void __iomem *reg = sachip->base + SA1111_GPIO;
585         u32 msk, val;
586
587         msk = *mask;
588         val = *bits;
589
590         spin_lock_irqsave(&sachip->lock, flags);
591         sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
592         sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
593         sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
594         sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
595         sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
596         sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
597         spin_unlock_irqrestore(&sachip->lock, flags);
598 }
599
600 static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
601 {
602         struct sa1111 *sachip = gc_to_sa1111(gc);
603
604         return sa1111_map_irq(sachip, offset);
605 }
606
607 static int sa1111_setup_gpios(struct sa1111 *sachip)
608 {
609         sachip->gc.label = "sa1111";
610         sachip->gc.parent = sachip->dev;
611         sachip->gc.owner = THIS_MODULE;
612         sachip->gc.get_direction = sa1111_gpio_get_direction;
613         sachip->gc.direction_input = sa1111_gpio_direction_input;
614         sachip->gc.direction_output = sa1111_gpio_direction_output;
615         sachip->gc.get = sa1111_gpio_get;
616         sachip->gc.set = sa1111_gpio_set;
617         sachip->gc.set_multiple = sa1111_gpio_set_multiple;
618         sachip->gc.to_irq = sa1111_gpio_to_irq;
619         sachip->gc.base = -1;
620         sachip->gc.ngpio = 18;
621
622         return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
623 }
624
625 /*
626  * Bring the SA1111 out of reset.  This requires a set procedure:
627  *  1. nRESET asserted (by hardware)
628  *  2. CLK turned on from SA1110
629  *  3. nRESET deasserted
630  *  4. VCO turned on, PLL_BYPASS turned off
631  *  5. Wait lock time, then assert RCLKEn
632  *  7. PCR set to allow clocking of individual functions
633  *
634  * Until we've done this, the only registers we can access are:
635  *   SBI_SKCR
636  *   SBI_SMCR
637  *   SBI_SKID
638  */
639 static void sa1111_wake(struct sa1111 *sachip)
640 {
641         unsigned long flags, r;
642
643         spin_lock_irqsave(&sachip->lock, flags);
644
645         clk_enable(sachip->clk);
646
647         /*
648          * Turn VCO on, and disable PLL Bypass.
649          */
650         r = readl_relaxed(sachip->base + SA1111_SKCR);
651         r &= ~SKCR_VCO_OFF;
652         writel_relaxed(r, sachip->base + SA1111_SKCR);
653         r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
654         writel_relaxed(r, sachip->base + SA1111_SKCR);
655
656         /*
657          * Wait lock time.  SA1111 manual _doesn't_
658          * specify a figure for this!  We choose 100us.
659          */
660         udelay(100);
661
662         /*
663          * Enable RCLK.  We also ensure that RDYEN is set.
664          */
665         r |= SKCR_RCLKEN | SKCR_RDYEN;
666         writel_relaxed(r, sachip->base + SA1111_SKCR);
667
668         /*
669          * Wait 14 RCLK cycles for the chip to finish coming out
670          * of reset. (RCLK=24MHz).  This is 590ns.
671          */
672         udelay(1);
673
674         /*
675          * Ensure all clocks are initially off.
676          */
677         writel_relaxed(0, sachip->base + SA1111_SKPCR);
678
679         spin_unlock_irqrestore(&sachip->lock, flags);
680 }
681
682 #ifdef CONFIG_ARCH_SA1100
683
684 static u32 sa1111_dma_mask[] = {
685         ~0,
686         ~(1 << 20),
687         ~(1 << 23),
688         ~(1 << 24),
689         ~(1 << 25),
690         ~(1 << 20),
691         ~(1 << 20),
692         0,
693 };
694
695 /*
696  * Configure the SA1111 shared memory controller.
697  */
698 static void
699 sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
700                      unsigned int cas_latency)
701 {
702         unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
703
704         if (cas_latency == 3)
705                 smcr |= SMCR_CLAT;
706
707         writel_relaxed(smcr, sachip->base + SA1111_SMCR);
708
709         /*
710          * Now clear the bits in the DMA mask to work around the SA1111
711          * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
712          * Chip Specification Update, June 2000, Erratum #7).
713          */
714         if (sachip->dev->dma_mask)
715                 *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
716
717         sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
718 }
719 #endif
720
721 static void sa1111_dev_release(struct device *_dev)
722 {
723         struct sa1111_dev *dev = to_sa1111_device(_dev);
724
725         kfree(dev);
726 }
727
728 static int
729 sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
730                       struct sa1111_dev_info *info)
731 {
732         struct sa1111_dev *dev;
733         unsigned i;
734         int ret;
735
736         dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
737         if (!dev) {
738                 ret = -ENOMEM;
739                 goto err_alloc;
740         }
741
742         device_initialize(&dev->dev);
743         dev_set_name(&dev->dev, "%4.4lx", info->offset);
744         dev->devid       = info->devid;
745         dev->dev.parent  = sachip->dev;
746         dev->dev.bus     = &sa1111_bus_type;
747         dev->dev.release = sa1111_dev_release;
748         dev->res.start   = sachip->phys + info->offset;
749         dev->res.end     = dev->res.start + 511;
750         dev->res.name    = dev_name(&dev->dev);
751         dev->res.flags   = IORESOURCE_MEM;
752         dev->mapbase     = sachip->base + info->offset;
753         dev->skpcr_mask  = info->skpcr_mask;
754
755         for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
756                 dev->hwirq[i] = info->hwirq[i];
757
758         /*
759          * If the parent device has a DMA mask associated with it, and
760          * this child supports DMA, propagate it down to the children.
761          */
762         if (info->dma && sachip->dev->dma_mask) {
763                 dev->dma_mask = *sachip->dev->dma_mask;
764                 dev->dev.dma_mask = &dev->dma_mask;
765                 dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
766         }
767
768         ret = request_resource(parent, &dev->res);
769         if (ret) {
770                 dev_err(sachip->dev, "failed to allocate resource for %s\n",
771                         dev->res.name);
772                 goto err_resource;
773         }
774
775         ret = device_add(&dev->dev);
776         if (ret)
777                 goto err_add;
778         return 0;
779
780  err_add:
781         release_resource(&dev->res);
782  err_resource:
783         put_device(&dev->dev);
784  err_alloc:
785         return ret;
786 }
787
788 static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
789 {
790         struct sa1111_platform_data *pd = me->platform_data;
791         struct sa1111 *sachip;
792         unsigned long id;
793         unsigned int has_devs;
794         int i, ret = -ENODEV;
795
796         if (!pd)
797                 return -EINVAL;
798
799         sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
800         if (!sachip)
801                 return -ENOMEM;
802
803         sachip->clk = devm_clk_get(me, "SA1111_CLK");
804         if (IS_ERR(sachip->clk))
805                 return PTR_ERR(sachip->clk);
806
807         ret = clk_prepare(sachip->clk);
808         if (ret)
809                 return ret;
810
811         spin_lock_init(&sachip->lock);
812
813         sachip->dev = me;
814         dev_set_drvdata(sachip->dev, sachip);
815
816         sachip->pdata = pd;
817         sachip->phys = mem->start;
818         sachip->irq = irq;
819
820         /*
821          * Map the whole region.  This also maps the
822          * registers for our children.
823          */
824         sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
825         if (!sachip->base) {
826                 ret = -ENOMEM;
827                 goto err_clk_unprep;
828         }
829
830         /*
831          * Probe for the chip.  Only touch the SBI registers.
832          */
833         id = readl_relaxed(sachip->base + SA1111_SKID);
834         if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
835                 printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
836                 ret = -ENODEV;
837                 goto err_unmap;
838         }
839
840         pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
841                 (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
842
843         /*
844          * We found it.  Wake the chip up, and initialise.
845          */
846         sa1111_wake(sachip);
847
848         /*
849          * The interrupt controller must be initialised before any
850          * other device to ensure that the interrupts are available.
851          */
852         ret = sa1111_setup_irq(sachip, pd->irq_base);
853         if (ret)
854                 goto err_clk;
855
856         /* Setup the GPIOs - should really be done after the IRQ setup */
857         ret = sa1111_setup_gpios(sachip);
858         if (ret)
859                 goto err_irq;
860
861 #ifdef CONFIG_ARCH_SA1100
862         {
863         unsigned int val;
864
865         /*
866          * The SDRAM configuration of the SA1110 and the SA1111 must
867          * match.  This is very important to ensure that SA1111 accesses
868          * don't corrupt the SDRAM.  Note that this ungates the SA1111's
869          * MBGNT signal, so we must have called sa1110_mb_disable()
870          * beforehand.
871          */
872         sa1111_configure_smc(sachip, 1,
873                              FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
874                              FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
875
876         /*
877          * We only need to turn on DCLK whenever we want to use the
878          * DMA.  It can otherwise be held firmly in the off position.
879          * (currently, we always enable it.)
880          */
881         val = readl_relaxed(sachip->base + SA1111_SKPCR);
882         writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
883
884         /*
885          * Enable the SA1110 memory bus request and grant signals.
886          */
887         sa1110_mb_enable();
888         }
889 #endif
890
891         g_sa1111 = sachip;
892
893         has_devs = ~0;
894         if (pd)
895                 has_devs &= ~pd->disable_devs;
896
897         for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
898                 if (sa1111_devices[i].devid & has_devs)
899                         sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
900
901         return 0;
902
903  err_irq:
904         sa1111_remove_irq(sachip);
905  err_clk:
906         clk_disable(sachip->clk);
907  err_unmap:
908         iounmap(sachip->base);
909  err_clk_unprep:
910         clk_unprepare(sachip->clk);
911         return ret;
912 }
913
914 static int sa1111_remove_one(struct device *dev, void *data)
915 {
916         struct sa1111_dev *sadev = to_sa1111_device(dev);
917         if (dev->bus != &sa1111_bus_type)
918                 return 0;
919         device_del(&sadev->dev);
920         release_resource(&sadev->res);
921         put_device(&sadev->dev);
922         return 0;
923 }
924
925 static void __sa1111_remove(struct sa1111 *sachip)
926 {
927         device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
928
929         sa1111_remove_irq(sachip);
930
931         clk_disable(sachip->clk);
932         clk_unprepare(sachip->clk);
933
934         iounmap(sachip->base);
935 }
936
937 struct sa1111_save_data {
938         unsigned int    skcr;
939         unsigned int    skpcr;
940         unsigned int    skcdr;
941         unsigned char   skaud;
942         unsigned char   skpwm0;
943         unsigned char   skpwm1;
944
945         /*
946          * Interrupt controller
947          */
948         unsigned int    intpol0;
949         unsigned int    intpol1;
950         unsigned int    inten0;
951         unsigned int    inten1;
952         unsigned int    wakepol0;
953         unsigned int    wakepol1;
954         unsigned int    wakeen0;
955         unsigned int    wakeen1;
956 };
957
958 #ifdef CONFIG_PM
959
960 static int sa1111_suspend_noirq(struct device *dev)
961 {
962         struct sa1111 *sachip = dev_get_drvdata(dev);
963         struct sa1111_save_data *save;
964         unsigned long flags;
965         unsigned int val;
966         void __iomem *base;
967
968         save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
969         if (!save)
970                 return -ENOMEM;
971         sachip->saved_state = save;
972
973         spin_lock_irqsave(&sachip->lock, flags);
974
975         /*
976          * Save state.
977          */
978         base = sachip->base;
979         save->skcr     = readl_relaxed(base + SA1111_SKCR);
980         save->skpcr    = readl_relaxed(base + SA1111_SKPCR);
981         save->skcdr    = readl_relaxed(base + SA1111_SKCDR);
982         save->skaud    = readl_relaxed(base + SA1111_SKAUD);
983         save->skpwm0   = readl_relaxed(base + SA1111_SKPWM0);
984         save->skpwm1   = readl_relaxed(base + SA1111_SKPWM1);
985
986         writel_relaxed(0, sachip->base + SA1111_SKPWM0);
987         writel_relaxed(0, sachip->base + SA1111_SKPWM1);
988
989         base = sachip->base + SA1111_INTC;
990         save->intpol0  = readl_relaxed(base + SA1111_INTPOL0);
991         save->intpol1  = readl_relaxed(base + SA1111_INTPOL1);
992         save->inten0   = readl_relaxed(base + SA1111_INTEN0);
993         save->inten1   = readl_relaxed(base + SA1111_INTEN1);
994         save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
995         save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
996         save->wakeen0  = readl_relaxed(base + SA1111_WAKEEN0);
997         save->wakeen1  = readl_relaxed(base + SA1111_WAKEEN1);
998
999         /*
1000          * Disable.
1001          */
1002         val = readl_relaxed(sachip->base + SA1111_SKCR);
1003         writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
1004
1005         clk_disable(sachip->clk);
1006
1007         spin_unlock_irqrestore(&sachip->lock, flags);
1008
1009 #ifdef CONFIG_ARCH_SA1100
1010         sa1110_mb_disable();
1011 #endif
1012
1013         return 0;
1014 }
1015
1016 /*
1017  *      sa1111_resume - Restore the SA1111 device state.
1018  *      @dev: device to restore
1019  *
1020  *      Restore the general state of the SA1111; clock control and
1021  *      interrupt controller.  Other parts of the SA1111 must be
1022  *      restored by their respective drivers, and must be called
1023  *      via LDM after this function.
1024  */
1025 static int sa1111_resume_noirq(struct device *dev)
1026 {
1027         struct sa1111 *sachip = dev_get_drvdata(dev);
1028         struct sa1111_save_data *save;
1029         unsigned long flags, id;
1030         void __iomem *base;
1031
1032         save = sachip->saved_state;
1033         if (!save)
1034                 return 0;
1035
1036         /*
1037          * Ensure that the SA1111 is still here.
1038          * FIXME: shouldn't do this here.
1039          */
1040         id = readl_relaxed(sachip->base + SA1111_SKID);
1041         if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
1042                 __sa1111_remove(sachip);
1043                 dev_set_drvdata(dev, NULL);
1044                 kfree(save);
1045                 return 0;
1046         }
1047
1048         /*
1049          * First of all, wake up the chip.
1050          */
1051         sa1111_wake(sachip);
1052
1053 #ifdef CONFIG_ARCH_SA1100
1054         /* Enable the memory bus request/grant signals */
1055         sa1110_mb_enable();
1056 #endif
1057
1058         /*
1059          * Only lock for write ops. Also, sa1111_wake must be called with
1060          * released spinlock!
1061          */
1062         spin_lock_irqsave(&sachip->lock, flags);
1063
1064         writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
1065         writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
1066
1067         base = sachip->base;
1068         writel_relaxed(save->skcr,     base + SA1111_SKCR);
1069         writel_relaxed(save->skpcr,    base + SA1111_SKPCR);
1070         writel_relaxed(save->skcdr,    base + SA1111_SKCDR);
1071         writel_relaxed(save->skaud,    base + SA1111_SKAUD);
1072         writel_relaxed(save->skpwm0,   base + SA1111_SKPWM0);
1073         writel_relaxed(save->skpwm1,   base + SA1111_SKPWM1);
1074
1075         base = sachip->base + SA1111_INTC;
1076         writel_relaxed(save->intpol0,  base + SA1111_INTPOL0);
1077         writel_relaxed(save->intpol1,  base + SA1111_INTPOL1);
1078         writel_relaxed(save->inten0,   base + SA1111_INTEN0);
1079         writel_relaxed(save->inten1,   base + SA1111_INTEN1);
1080         writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
1081         writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
1082         writel_relaxed(save->wakeen0,  base + SA1111_WAKEEN0);
1083         writel_relaxed(save->wakeen1,  base + SA1111_WAKEEN1);
1084
1085         spin_unlock_irqrestore(&sachip->lock, flags);
1086
1087         sachip->saved_state = NULL;
1088         kfree(save);
1089
1090         return 0;
1091 }
1092
1093 #else
1094 #define sa1111_suspend_noirq NULL
1095 #define sa1111_resume_noirq  NULL
1096 #endif
1097
1098 /**
1099  *      sa1111_probe - probe for a single SA1111 chip.
1100  *      @pdev: platform device.
1101  *
1102  *      Probe for a SA1111 chip.  This must be called
1103  *      before any other SA1111-specific code.
1104  *
1105  *      Returns:
1106  *      * %-ENODEV      - device not found.
1107  *      * %-ENOMEM      - memory allocation failure.
1108  *      * %-EBUSY       - physical address already marked in-use.
1109  *      * %-EINVAL      - no platform data passed
1110  *      * %0            - successful.
1111  */
1112 static int sa1111_probe(struct platform_device *pdev)
1113 {
1114         struct resource *mem;
1115         int irq;
1116
1117         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1118         if (!mem)
1119                 return -EINVAL;
1120         irq = platform_get_irq(pdev, 0);
1121         if (irq < 0)
1122                 return irq;
1123
1124         return __sa1111_probe(&pdev->dev, mem, irq);
1125 }
1126
1127 static void sa1111_remove(struct platform_device *pdev)
1128 {
1129         struct sa1111 *sachip = platform_get_drvdata(pdev);
1130
1131         if (sachip) {
1132 #ifdef CONFIG_PM
1133                 kfree(sachip->saved_state);
1134                 sachip->saved_state = NULL;
1135 #endif
1136                 __sa1111_remove(sachip);
1137                 platform_set_drvdata(pdev, NULL);
1138         }
1139 }
1140
1141 static struct dev_pm_ops sa1111_pm_ops = {
1142         .suspend_noirq = sa1111_suspend_noirq,
1143         .resume_noirq = sa1111_resume_noirq,
1144 };
1145
1146 /*
1147  *      Not sure if this should be on the system bus or not yet.
1148  *      We really want some way to register a system device at
1149  *      the per-machine level, and then have this driver pick
1150  *      up the registered devices.
1151  *
1152  *      We also need to handle the SDRAM configuration for
1153  *      PXA250/SA1110 machine classes.
1154  */
1155 static struct platform_driver sa1111_device_driver = {
1156         .probe          = sa1111_probe,
1157         .remove_new     = sa1111_remove,
1158         .driver         = {
1159                 .name   = "sa1111",
1160                 .pm     = &sa1111_pm_ops,
1161         },
1162 };
1163
1164 /*
1165  *      Get the parent device driver (us) structure
1166  *      from a child function device
1167  */
1168 static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1169 {
1170         return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1171 }
1172
1173 /*
1174  * The bits in the opdiv field are non-linear.
1175  */
1176 static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1177
1178 static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1179 {
1180         unsigned int skcdr, fbdiv, ipdiv, opdiv;
1181
1182         skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
1183
1184         fbdiv = (skcdr & 0x007f) + 2;
1185         ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1186         opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1187
1188         return 3686400 * fbdiv / (ipdiv * opdiv);
1189 }
1190
1191 /**
1192  *      sa1111_pll_clock - return the current PLL clock frequency.
1193  *      @sadev: SA1111 function block
1194  *
1195  *      BUG: we should look at SKCR.  We also blindly believe that
1196  *      the chip is being fed with the 3.6864MHz clock.
1197  *
1198  *      Returns the PLL clock in Hz.
1199  */
1200 unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1201 {
1202         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1203
1204         return __sa1111_pll_clock(sachip);
1205 }
1206 EXPORT_SYMBOL(sa1111_pll_clock);
1207
1208 /**
1209  *      sa1111_select_audio_mode - select I2S or AC link mode
1210  *      @sadev: SA1111 function block
1211  *      @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1212  *
1213  *      Frob the SKCR to select AC Link mode or I2S mode for
1214  *      the audio block.
1215  */
1216 void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1217 {
1218         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1219         unsigned long flags;
1220         unsigned int val;
1221
1222         spin_lock_irqsave(&sachip->lock, flags);
1223
1224         val = readl_relaxed(sachip->base + SA1111_SKCR);
1225         if (mode == SA1111_AUDIO_I2S) {
1226                 val &= ~SKCR_SELAC;
1227         } else {
1228                 val |= SKCR_SELAC;
1229         }
1230         writel_relaxed(val, sachip->base + SA1111_SKCR);
1231
1232         spin_unlock_irqrestore(&sachip->lock, flags);
1233 }
1234 EXPORT_SYMBOL(sa1111_select_audio_mode);
1235
1236 /**
1237  *      sa1111_set_audio_rate - set the audio sample rate
1238  *      @sadev: SA1111 SAC function block
1239  *      @rate: sample rate to select
1240  */
1241 int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1242 {
1243         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1244         unsigned int div;
1245
1246         if (sadev->devid != SA1111_DEVID_SAC)
1247                 return -EINVAL;
1248
1249         div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1250         if (div == 0)
1251                 div = 1;
1252         if (div > 128)
1253                 div = 128;
1254
1255         writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
1256
1257         return 0;
1258 }
1259 EXPORT_SYMBOL(sa1111_set_audio_rate);
1260
1261 /**
1262  *      sa1111_get_audio_rate - get the audio sample rate
1263  *      @sadev: SA1111 SAC function block device
1264  */
1265 int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1266 {
1267         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1268         unsigned long div;
1269
1270         if (sadev->devid != SA1111_DEVID_SAC)
1271                 return -EINVAL;
1272
1273         div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
1274
1275         return __sa1111_pll_clock(sachip) / (256 * div);
1276 }
1277 EXPORT_SYMBOL(sa1111_get_audio_rate);
1278
1279 /*
1280  * Individual device operations.
1281  */
1282
1283 /**
1284  *      sa1111_enable_device - enable an on-chip SA1111 function block
1285  *      @sadev: SA1111 function block device to enable
1286  */
1287 int sa1111_enable_device(struct sa1111_dev *sadev)
1288 {
1289         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1290         unsigned long flags;
1291         unsigned int val;
1292         int ret = 0;
1293
1294         if (sachip->pdata && sachip->pdata->enable)
1295                 ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1296
1297         if (ret == 0) {
1298                 spin_lock_irqsave(&sachip->lock, flags);
1299                 val = readl_relaxed(sachip->base + SA1111_SKPCR);
1300                 writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1301                 spin_unlock_irqrestore(&sachip->lock, flags);
1302         }
1303         return ret;
1304 }
1305 EXPORT_SYMBOL(sa1111_enable_device);
1306
1307 /**
1308  *      sa1111_disable_device - disable an on-chip SA1111 function block
1309  *      @sadev: SA1111 function block device to disable
1310  */
1311 void sa1111_disable_device(struct sa1111_dev *sadev)
1312 {
1313         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1314         unsigned long flags;
1315         unsigned int val;
1316
1317         spin_lock_irqsave(&sachip->lock, flags);
1318         val = readl_relaxed(sachip->base + SA1111_SKPCR);
1319         writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1320         spin_unlock_irqrestore(&sachip->lock, flags);
1321
1322         if (sachip->pdata && sachip->pdata->disable)
1323                 sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1324 }
1325 EXPORT_SYMBOL(sa1111_disable_device);
1326
1327 int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
1328 {
1329         struct sa1111 *sachip = sa1111_chip_driver(sadev);
1330         if (num >= ARRAY_SIZE(sadev->hwirq))
1331                 return -EINVAL;
1332         return sa1111_map_irq(sachip, sadev->hwirq[num]);
1333 }
1334 EXPORT_SYMBOL_GPL(sa1111_get_irq);
1335
1336 /*
1337  *      SA1111 "Register Access Bus."
1338  *
1339  *      We model this as a regular bus type, and hang devices directly
1340  *      off this.
1341  */
1342 static int sa1111_match(struct device *_dev, struct device_driver *_drv)
1343 {
1344         struct sa1111_dev *dev = to_sa1111_device(_dev);
1345         struct sa1111_driver *drv = SA1111_DRV(_drv);
1346
1347         return !!(dev->devid & drv->devid);
1348 }
1349
1350 static int sa1111_bus_probe(struct device *dev)
1351 {
1352         struct sa1111_dev *sadev = to_sa1111_device(dev);
1353         struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1354         int ret = -ENODEV;
1355
1356         if (drv->probe)
1357                 ret = drv->probe(sadev);
1358         return ret;
1359 }
1360
1361 static void sa1111_bus_remove(struct device *dev)
1362 {
1363         struct sa1111_dev *sadev = to_sa1111_device(dev);
1364         struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1365
1366         if (drv->remove)
1367                 drv->remove(sadev);
1368 }
1369
1370 struct bus_type sa1111_bus_type = {
1371         .name           = "sa1111-rab",
1372         .match          = sa1111_match,
1373         .probe          = sa1111_bus_probe,
1374         .remove         = sa1111_bus_remove,
1375 };
1376 EXPORT_SYMBOL(sa1111_bus_type);
1377
1378 int sa1111_driver_register(struct sa1111_driver *driver)
1379 {
1380         driver->drv.bus = &sa1111_bus_type;
1381         return driver_register(&driver->drv);
1382 }
1383 EXPORT_SYMBOL(sa1111_driver_register);
1384
1385 void sa1111_driver_unregister(struct sa1111_driver *driver)
1386 {
1387         driver_unregister(&driver->drv);
1388 }
1389 EXPORT_SYMBOL(sa1111_driver_unregister);
1390
1391 static int __init sa1111_init(void)
1392 {
1393         int ret = bus_register(&sa1111_bus_type);
1394         if (ret == 0)
1395                 platform_driver_register(&sa1111_device_driver);
1396         return ret;
1397 }
1398
1399 static void __exit sa1111_exit(void)
1400 {
1401         platform_driver_unregister(&sa1111_device_driver);
1402         bus_unregister(&sa1111_bus_type);
1403 }
1404
1405 subsys_initcall(sa1111_init);
1406 module_exit(sa1111_exit);
1407
1408 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1409 MODULE_LICENSE("GPL");