1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
9 compatible = "xlnx,zynq-7000";
16 compatible = "arm,cortex-a9";
20 clock-latency = <1000>;
21 cpu0-supply = <®ulator_vccpint>;
30 compatible = "arm,cortex-a9";
37 fpga_full: fpga-full {
38 compatible = "fpga-region";
46 compatible = "arm,cortex-a9-pmu";
47 interrupts = <0 5 4>, <0 6 4>;
48 interrupt-parent = <&intc>;
49 reg = <0xf8891000 0x1000>,
53 regulator_vccpint: fixedregulator {
54 compatible = "regulator-fixed";
55 regulator-name = "VCCPINT";
56 regulator-min-microvolt = <1000000>;
57 regulator-max-microvolt = <1000000>;
63 compatible = "arm,coresight-static-replicator";
64 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
65 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
71 /* replicator output ports */
74 replicator_out_port0: endpoint {
75 remote-endpoint = <&tpiu_in_port>;
80 replicator_out_port1: endpoint {
81 remote-endpoint = <&etb_in_port>;
86 /* replicator input port */
88 replicator_in_port0: endpoint {
89 remote-endpoint = <&funnel_out_port>;
96 compatible = "simple-bus";
99 interrupt-parent = <&intc>;
103 compatible = "xlnx,zynq-xadc-1.00.a";
104 reg = <0xf8007100 0x20>;
105 interrupts = <0 7 4>;
106 interrupt-parent = <&intc>;
111 compatible = "xlnx,zynq-can-1.0";
113 clocks = <&clkc 19>, <&clkc 36>;
114 clock-names = "can_clk", "pclk";
115 reg = <0xe0008000 0x1000>;
116 interrupts = <0 28 4>;
117 interrupt-parent = <&intc>;
118 tx-fifo-depth = <0x40>;
119 rx-fifo-depth = <0x40>;
123 compatible = "xlnx,zynq-can-1.0";
125 clocks = <&clkc 20>, <&clkc 37>;
126 clock-names = "can_clk", "pclk";
127 reg = <0xe0009000 0x1000>;
128 interrupts = <0 51 4>;
129 interrupt-parent = <&intc>;
130 tx-fifo-depth = <0x40>;
131 rx-fifo-depth = <0x40>;
134 gpio0: gpio@e000a000 {
135 compatible = "xlnx,zynq-gpio-1.0";
139 interrupt-controller;
140 #interrupt-cells = <2>;
141 interrupt-parent = <&intc>;
142 interrupts = <0 20 4>;
143 reg = <0xe000a000 0x1000>;
147 compatible = "cdns,i2c-r1p10";
150 interrupt-parent = <&intc>;
151 interrupts = <0 25 4>;
152 reg = <0xe0004000 0x1000>;
153 #address-cells = <1>;
158 compatible = "cdns,i2c-r1p10";
161 interrupt-parent = <&intc>;
162 interrupts = <0 48 4>;
163 reg = <0xe0005000 0x1000>;
164 #address-cells = <1>;
168 intc: interrupt-controller@f8f01000 {
169 compatible = "arm,cortex-a9-gic";
170 #interrupt-cells = <3>;
171 interrupt-controller;
172 reg = <0xF8F01000 0x1000>,
176 L2: cache-controller@f8f02000 {
177 compatible = "arm,pl310-cache";
178 reg = <0xF8F02000 0x1000>;
179 interrupts = <0 2 4>;
180 arm,data-latency = <3 2 2>;
181 arm,tag-latency = <2 2 2>;
186 mc: memory-controller@f8006000 {
187 compatible = "xlnx,zynq-ddrc-a05";
188 reg = <0xf8006000 0x1000>;
191 uart0: serial@e0000000 {
192 compatible = "xlnx,xuartps", "cdns,uart-r1p8";
194 clocks = <&clkc 23>, <&clkc 40>;
195 clock-names = "uart_clk", "pclk";
196 reg = <0xE0000000 0x1000>;
197 interrupts = <0 27 4>;
200 uart1: serial@e0001000 {
201 compatible = "xlnx,xuartps", "cdns,uart-r1p8";
203 clocks = <&clkc 24>, <&clkc 41>;
204 clock-names = "uart_clk", "pclk";
205 reg = <0xE0001000 0x1000>;
206 interrupts = <0 50 4>;
210 compatible = "xlnx,zynq-spi-r1p6";
211 reg = <0xe0006000 0x1000>;
213 interrupt-parent = <&intc>;
214 interrupts = <0 26 4>;
215 clocks = <&clkc 25>, <&clkc 34>;
216 clock-names = "ref_clk", "pclk";
217 #address-cells = <1>;
222 compatible = "xlnx,zynq-spi-r1p6";
223 reg = <0xe0007000 0x1000>;
225 interrupt-parent = <&intc>;
226 interrupts = <0 49 4>;
227 clocks = <&clkc 26>, <&clkc 35>;
228 clock-names = "ref_clk", "pclk";
229 #address-cells = <1>;
233 gem0: ethernet@e000b000 {
234 compatible = "cdns,zynq-gem", "cdns,gem";
235 reg = <0xe000b000 0x1000>;
237 interrupts = <0 22 4>;
238 clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
239 clock-names = "pclk", "hclk", "tx_clk";
240 #address-cells = <1>;
244 gem1: ethernet@e000c000 {
245 compatible = "cdns,zynq-gem", "cdns,gem";
246 reg = <0xe000c000 0x1000>;
248 interrupts = <0 45 4>;
249 clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
250 clock-names = "pclk", "hclk", "tx_clk";
251 #address-cells = <1>;
255 smcc: memory-controller@e000e000 {
256 compatible = "arm,pl353-smc-r2p1", "arm,primecell";
257 reg = <0xe000e000 0x0001000>;
259 clock-names = "memclk", "apb_pclk";
260 clocks = <&clkc 11>, <&clkc 44>;
261 ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
262 0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
263 0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
264 #address-cells = <2>;
267 nfc0: nand-controller@0,0 {
268 compatible = "arm,pl353-nand-r2p1";
269 reg = <0 0 0x1000000>;
271 #address-cells = <1>;
276 sdhci0: mmc@e0100000 {
277 compatible = "arasan,sdhci-8.9a";
279 clock-names = "clk_xin", "clk_ahb";
280 clocks = <&clkc 21>, <&clkc 32>;
281 interrupt-parent = <&intc>;
282 interrupts = <0 24 4>;
283 reg = <0xe0100000 0x1000>;
286 sdhci1: mmc@e0101000 {
287 compatible = "arasan,sdhci-8.9a";
289 clock-names = "clk_xin", "clk_ahb";
290 clocks = <&clkc 22>, <&clkc 33>;
291 interrupt-parent = <&intc>;
292 interrupts = <0 47 4>;
293 reg = <0xe0101000 0x1000>;
296 slcr: slcr@f8000000 {
297 #address-cells = <1>;
299 compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
300 reg = <0xF8000000 0x1000>;
304 compatible = "xlnx,ps7-clkc";
306 clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
307 "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
308 "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
309 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
310 "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
311 "dma", "usb0_aper", "usb1_aper", "gem0_aper",
312 "gem1_aper", "sdio0_aper", "sdio1_aper",
313 "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
314 "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
315 "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
316 "dbg_trc", "dbg_apb";
321 compatible = "xlnx,zynq-reset";
327 pinctrl0: pinctrl@700 {
328 compatible = "xlnx,pinctrl-zynq";
334 dmac_s: dmac@f8003000 {
335 compatible = "arm,pl330", "arm,primecell";
336 reg = <0xf8003000 0x1000>;
337 interrupt-parent = <&intc>;
338 interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
339 "dma4", "dma5", "dma6", "dma7";
340 interrupts = <0 13 4>,
349 clock-names = "apb_pclk";
352 devcfg: devcfg@f8007000 {
353 compatible = "xlnx,zynq-devcfg-1.0";
354 reg = <0xf8007000 0x100>;
355 interrupt-parent = <&intc>;
356 interrupts = <0 8 4>;
358 clock-names = "ref_clk";
362 global_timer: timer@f8f00200 {
363 compatible = "arm,cortex-a9-global-timer";
364 reg = <0xf8f00200 0x20>;
365 interrupts = <1 11 0x301>;
366 interrupt-parent = <&intc>;
370 ttc0: timer@f8001000 {
371 interrupt-parent = <&intc>;
372 interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
373 compatible = "cdns,ttc";
375 reg = <0xF8001000 0x1000>;
378 ttc1: timer@f8002000 {
379 interrupt-parent = <&intc>;
380 interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
381 compatible = "cdns,ttc";
383 reg = <0xF8002000 0x1000>;
386 scutimer: timer@f8f00600 {
387 interrupt-parent = <&intc>;
388 interrupts = <1 13 0x301>;
389 compatible = "arm,cortex-a9-twd-timer";
390 reg = <0xf8f00600 0x20>;
395 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
398 interrupt-parent = <&intc>;
399 interrupts = <0 21 4>;
400 reg = <0xe0002000 0x1000>;
405 compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
408 interrupt-parent = <&intc>;
409 interrupts = <0 44 4>;
410 reg = <0xe0003000 0x1000>;
414 watchdog0: watchdog@f8005000 {
416 compatible = "cdns,wdt-r1p2";
417 interrupt-parent = <&intc>;
418 interrupts = <0 9 1>;
419 reg = <0xf8005000 0x1000>;
424 compatible = "arm,coresight-etb10", "arm,primecell";
425 reg = <0xf8801000 0x1000>;
426 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
427 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
430 etb_in_port: endpoint {
431 remote-endpoint = <&replicator_out_port1>;
438 compatible = "arm,coresight-tpiu", "arm,primecell";
439 reg = <0xf8803000 0x1000>;
440 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
441 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
444 tpiu_in_port: endpoint {
445 remote-endpoint = <&replicator_out_port0>;
452 compatible = "arm,coresight-static-funnel", "arm,primecell";
453 reg = <0xf8804000 0x1000>;
454 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
455 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
457 /* funnel output ports */
460 funnel_out_port: endpoint {
462 <&replicator_in_port0>;
468 #address-cells = <1>;
471 /* funnel input ports */
474 funnel0_in_port0: endpoint {
475 remote-endpoint = <&ptm0_out_port>;
481 funnel0_in_port1: endpoint {
482 remote-endpoint = <&ptm1_out_port>;
488 funnel0_in_port2: endpoint {
491 /* The other input ports are not connect to anything */
496 compatible = "arm,coresight-etm3x", "arm,primecell";
497 reg = <0xf889c000 0x1000>;
498 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
499 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
503 ptm0_out_port: endpoint {
504 remote-endpoint = <&funnel0_in_port0>;
511 compatible = "arm,coresight-etm3x", "arm,primecell";
512 reg = <0xf889d000 0x1000>;
513 clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
514 clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
518 ptm1_out_port: endpoint {
519 remote-endpoint = <&funnel0_in_port1>;