2 * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
4 * Based on an original 'vf610-twr.dts' which is Copyright 2015,
5 * Freescale Semiconductor, Inc.
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * version 2 as published by the Free Software Foundation.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
49 stdout-path = "serial0:115200n8";
53 device_type = "memory";
54 reg = <0x80000000 0x20000000>;
58 compatible = "gpio-leds";
59 pinctrl-0 = <&pinctrl_leds_debug>;
60 pinctrl-names = "default";
63 label = "zii:green:debug1";
64 gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
65 linux,default-trigger = "heartbeat";
69 reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
70 compatible = "regulator-fixed";
71 regulator-name = "vcc_3v3_mcu";
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
76 usb0_vbus: regulator-usb0-vbus {
77 compatible = "regulator-fixed";
78 pinctrl-0 = <&pinctrl_usb_vbus>;
79 regulator-name = "usb_vbus";
80 regulator-min-microvolt = <5000000>;
81 regulator-max-microvolt = <5000000>;
88 supply-voltage-monitor {
89 compatible = "iio-hwmon";
90 io-channels = <&adc0 8>, /* VCC_1V5 */
91 <&adc0 9>, /* VCC_1V8 */
92 <&adc1 8>, /* VCC_1V0 */
93 <&adc1 9>; /* VCC_1V2 */
98 pinctrl-names = "default";
99 pinctrl-0 = <&pinctrl_adc0_ad5>;
100 vref-supply = <®_vcc_3v3_mcu>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_esdhc1>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pinctrl_fec0>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_fec1>;
138 #address-cells = <1>;
145 clock-frequency = <100000>;
146 pinctrl-names = "default", "gpio";
147 pinctrl-0 = <&pinctrl_i2c0>;
148 pinctrl-1 = <&pinctrl_i2c0_gpio>;
149 scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
150 sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
154 compatible = "national,lm75";
159 compatible = "atmel,24c04";
164 compatible = "atmel,24c04";
169 compatible = "dallas,ds1682";
175 clock-frequency = <100000>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&pinctrl_i2c1>;
182 clock-frequency = <100000>;
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_i2c2>;
189 pinctrl-names = "default";
190 pinctrl-0 = <&pinctrl_qspi0>;
194 * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
195 * modes, so, spi-max-frequency is limited to 90MHz
198 compatible = "jedec,spi-nor";
199 #address-cells = <1>;
201 spi-max-frequency = <90000000>;
202 spi-rx-bus-width = <4>;
208 compatible = "jedec,spi-nor";
209 #address-cells = <1>;
211 spi-max-frequency = <90000000>;
212 spi-rx-bus-width = <4>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&pinctrl_uart0>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&pinctrl_uart1>;
231 pinctrl-names = "default";
232 pinctrl-0 = <&pinctrl_uart2>;
237 disable-over-current;
238 vbus-supply = <&usb0_vbus>;
244 disable-over-current;
265 io-channels = <&adc0 16>;
269 pinctrl_adc0_ad5: adc0ad5grp {
271 VF610_PAD_PTC30__ADC0_SE5 0x00a1
275 pinctrl_dspi0: dspi0grp {
277 VF610_PAD_PTB18__DSPI0_CS1 0x1182
278 VF610_PAD_PTB19__DSPI0_CS0 0x1182
279 VF610_PAD_PTB20__DSPI0_SIN 0x1181
280 VF610_PAD_PTB21__DSPI0_SOUT 0x1182
281 VF610_PAD_PTB22__DSPI0_SCK 0x1182
285 pinctrl_dspi2: dspi2grp {
287 VF610_PAD_PTD31__DSPI2_CS1 0x1182
288 VF610_PAD_PTD30__DSPI2_CS0 0x1182
289 VF610_PAD_PTD29__DSPI2_SIN 0x1181
290 VF610_PAD_PTD28__DSPI2_SOUT 0x1182
291 VF610_PAD_PTD27__DSPI2_SCK 0x1182
295 pinctrl_esdhc1: esdhc1grp {
297 VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
298 VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
299 VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
300 VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
301 VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
302 VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
303 VF610_PAD_PTA7__GPIO_134 0x219d
307 pinctrl_fec0: fec0grp {
309 VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d2
310 VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d3
311 VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
312 VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
313 VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
314 VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
315 VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
316 VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
317 VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
321 pinctrl_fec1: fec1grp {
323 VF610_PAD_PTA6__RMII_CLKIN 0x30d1
324 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
325 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
326 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
327 VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
328 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
329 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
330 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
331 VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
332 VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
336 pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
338 VF610_PAD_PTB22__GPIO_44 0x33e2
339 VF610_PAD_PTB21__GPIO_43 0x33e2
340 VF610_PAD_PTB20__GPIO_42 0x33e1
341 VF610_PAD_PTB19__GPIO_41 0x33e2
342 VF610_PAD_PTB18__GPIO_40 0x33e2
346 pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
348 VF610_PAD_PTB5__GPIO_27 0x219d
352 pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
354 VF610_PAD_PTB4__GPIO_26 0x219d
358 pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
360 VF610_PAD_PTE14__GPIO_119 0x31c2
364 pinctrl_i2c0: i2c0grp {
366 VF610_PAD_PTB14__I2C0_SCL 0x37ff
367 VF610_PAD_PTB15__I2C0_SDA 0x37ff
371 pinctrl_i2c0_gpio: i2c0grp-gpio {
373 VF610_PAD_PTB14__GPIO_36 0x31c2
374 VF610_PAD_PTB15__GPIO_37 0x31c2
379 pinctrl_i2c1: i2c1grp {
381 VF610_PAD_PTB16__I2C1_SCL 0x37ff
382 VF610_PAD_PTB17__I2C1_SDA 0x37ff
386 pinctrl_i2c2: i2c2grp {
388 VF610_PAD_PTA22__I2C2_SCL 0x37ff
389 VF610_PAD_PTA23__I2C2_SDA 0x37ff
393 pinctrl_leds_debug: pinctrl-leds-debug {
395 VF610_PAD_PTD20__GPIO_74 0x31c2
399 pinctrl_qspi0: qspi0grp {
401 VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
402 VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
403 VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
404 VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
405 VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
406 VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
407 VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
408 VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
409 VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
410 VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
411 VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
412 VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
416 pinctrl_uart0: uart0grp {
418 VF610_PAD_PTB10__UART0_TX 0x21a2
419 VF610_PAD_PTB11__UART0_RX 0x21a1
423 pinctrl_uart1: uart1grp {
425 VF610_PAD_PTB23__UART1_TX 0x21a2
426 VF610_PAD_PTB24__UART1_RX 0x21a1
430 pinctrl_uart2: uart2grp {
432 VF610_PAD_PTD23__UART2_TX 0x21a2
433 VF610_PAD_PTD22__UART2_RX 0x21a1
437 pinctrl_usb_vbus: pinctrl-usb-vbus {
439 VF610_PAD_PTA16__GPIO_6 0x31c2
443 pinctrl_usb0_host: usb0-host-grp {
445 VF610_PAD_PTD6__GPIO_85 0x0062