3 #include "tegra20-tamonten.dtsi"
6 model = "Avionic Design Medcom-Wide board";
7 compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
14 stdout-path = "serial0:115200n8";
25 nvidia,panel = <&panel>;
32 compatible = "wlf,wm8903";
34 interrupt-parent = <&gpio>;
35 interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
42 gpio-cfg = <0xffffffff
50 backlight: backlight {
51 compatible = "pwm-backlight";
52 pwms = <&pwm 0 5000000>;
54 brightness-levels = <0 4 8 16 32 64 128 255>;
55 default-brightness-level = <6>;
59 compatible = "innolux,n156bge-l21", "simple-panel";
61 power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>;
62 enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
64 backlight = <&backlight>;
68 compatible = "ad,tegra-audio-wm8903-medcom-wide",
69 "nvidia,tegra-audio-wm8903";
70 nvidia,model = "Avionic Design Medcom-Wide";
72 nvidia,audio-routing =
73 "Headphone Jack", "HPOUTR",
74 "Headphone Jack", "HPOUTL",
79 "Mic Jack", "MICBIAS",
82 nvidia,i2s-controller = <&tegra_i2s1>;
83 nvidia,audio-codec = <&wm8903>;
85 nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
86 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
88 clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
89 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
90 <&tegra_car TEGRA20_CLK_CDEV1>;
91 clock-names = "pll_a", "pll_a_out0", "mclk";
95 vcc_24v_reg: regulator@100 {
96 compatible = "regulator-fixed";
98 regulator-name = "vcc_24v";
99 regulator-min-microvolt = <24000000>;
100 regulator-max-microvolt = <24000000>;
104 vdd_5v0_reg: regulator@101 {
105 compatible = "regulator-fixed";
107 regulator-name = "vdd_5v0";
108 vin-supply = <&vcc_24v_reg>;
109 regulator-min-microvolt = <5000000>;
110 regulator-max-microvolt = <5000000>;
114 vdd_3v3_reg: regulator@102 {
115 compatible = "regulator-fixed";
117 regulator-name = "vdd_3v3";
118 vin-supply = <&vcc_24v_reg>;
119 regulator-min-microvolt = <3300000>;
120 regulator-max-microvolt = <3300000>;
124 vdd_1v8_reg: regulator@103 {
125 compatible = "regulator-fixed";
127 regulator-name = "vdd_1v8";
128 vin-supply = <&vdd_3v3_reg>;
129 regulator-min-microvolt = <1800000>;
130 regulator-max-microvolt = <1800000>;