2 * Based on Mans Rullgard's Tango3 DT
3 * https://github.com/mansr/linux-tangox
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
14 interrupt-parent = <&gic>;
18 periph_clk: periph_clk {
19 compatible = "fixed-factor-clock";
20 clocks = <&clkgen CPU_CLK>;
27 compatible = "simple-bus";
28 ranges = <0x00000000 0x20000000 0x2000>;
33 compatible = "arm,cortex-a9-scu";
38 compatible = "arm,cortex-a9-twd-timer";
40 interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
41 clocks = <&periph_clk>;
45 gic: interrupt-controller@1000 {
46 compatible = "arm,cortex-a9-gic";
47 #interrupt-cells = <3>;
49 reg = <0x1000 0x1000>, <0x100 0x100>;
53 l2cc: l2-cache-controller@20100000 {
54 compatible = "arm,pl310-cache";
55 reg = <0x20100000 0x1000>;
61 compatible = "simple-bus";
62 interrupt-parent = <&irq0>;
68 compatible = "fixed-clock";
69 clock-frequency = <27000000>;
73 clkgen: clkgen@10000 {
74 compatible = "sigma,tango4-clkgen";
75 reg = <0x10000 0x100>;
81 compatible = "sigma,tick-counter";
87 compatible = "ralink,rt2880-uart";
89 interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
90 clock-frequency = <7372800>;
95 compatible = "sigma,smp8759-wdt";
101 compatible = "arasan,sdhci-8.9a";
102 reg = <0x21000 0x200>;
103 clock-names = "clk_xin", "clk_ahb";
104 clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
105 interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
109 compatible = "arasan,sdhci-8.9a";
110 reg = <0x21200 0x200>;
111 clock-names = "clk_xin", "clk_ahb";
112 clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
113 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
117 compatible = "chipidea,usb2";
118 reg = <0x21400 0x200>;
119 interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
121 phy-names = "usb-phy";
124 usb0_phy: phy@21700 {
125 compatible = "sigma,smp8642-usb-phy";
126 reg = <0x21700 0x100>;
128 clocks = <&clkgen USB_CLK>;
132 compatible = "chipidea,usb2";
133 reg = <0x25400 0x200>;
134 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
136 phy-names = "usb-phy";
139 usb1_phy: phy@25700 {
140 compatible = "sigma,smp8642-usb-phy";
141 reg = <0x25700 0x100>;
143 clocks = <&clkgen USB_CLK>;
146 eth0: ethernet@26000 {
147 compatible = "sigma,smp8734-ethernet";
148 reg = <0x26000 0x800>;
149 interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
150 clocks = <&clkgen SYS_CLK>;
153 intc: interrupt-controller@6e000 {
154 compatible = "sigma,smp8642-intc";
155 reg = <0x6e000 0x400>;
156 ranges = <0 0x6e000 0x400>;
157 interrupt-parent = <&gic>;
158 interrupt-controller;
159 #address-cells = <1>;
164 interrupt-controller;
165 #interrupt-cells = <2>;
166 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
171 interrupt-controller;
172 #interrupt-cells = <2>;
173 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
178 interrupt-controller;
179 #interrupt-cells = <2>;
180 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;