2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
4 * Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
53 model = "LeMaker Banana Pi";
54 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
63 stdout-path = "serial0:115200n8";
67 compatible = "hdmi-connector";
71 hdmi_con_in: endpoint {
72 remote-endpoint = <&hdmi_out_con>;
78 compatible = "gpio-leds";
81 label = "bananapi:green:usr";
82 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
86 reg_gmac_3v3: gmac-3v3 {
87 compatible = "regulator-fixed";
88 regulator-name = "gmac-3v3";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 startup-delay-us = <100000>;
93 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
106 cpu-supply = <®_dcdc2>;
131 pinctrl-names = "default";
132 pinctrl-0 = <&gmac_rgmii_pins>;
133 phy-handle = <&phy1>;
134 phy-mode = "rgmii-id";
135 phy-supply = <®_gmac_3v3>;
144 hdmi_out_con: endpoint {
145 remote-endpoint = <&hdmi_con_in>;
154 interrupt-parent = <&nmi_intc>;
155 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&ir0_rx_pin>;
170 phy1: ethernet-phy@1 {
176 vmmc-supply = <®_vcc3v3>;
178 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
195 vcc-pa-supply = <®_vcc3v3>;
196 vcc-pc-supply = <®_vcc3v3>;
197 vcc-pe-supply = <®_vcc3v3>;
198 vcc-pf-supply = <®_vcc3v3>;
199 vcc-pg-supply = <®_vcc3v3>;
202 "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
203 "ETXD2", "ETXD1", "ETXD0",
204 "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
205 "ETXEN", "ETXCK", "ECRS",
206 "ECOL", "ETXERR", "", "", "", "", "", "",
207 "", "", "", "", "", "", "", "",
209 "PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
210 "", "USB0-DRV", "", "", "", "", "", "",
211 "", "", "", "", "SCL", "SDA", "", "",
212 "", "", "", "", "", "", "", "",
214 "", "", "", "", "", "", "", "",
215 "", "", "", "", "", "", "", "",
216 "", "", "", "", "", "", "", "",
217 "", "", "", "", "", "", "", "",
219 "", "", "", "", "", "", "", "",
220 "", "", "", "", "", "", "", "",
221 "", "", "", "", "", "", "", "",
222 "", "", "", "", "", "", "", "",
224 "", "", "", "", "", "", "", "",
225 "", "", "", "", "", "", "", "",
226 "", "", "", "", "", "", "", "",
227 "", "", "", "", "", "", "", "",
229 "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
231 "", "", "", "", "", "", "", "",
232 "", "", "", "", "", "", "", "",
233 "", "", "", "", "", "", "", "",
235 "", "", "", "", "", "", "", "",
236 "", "", "", "", "", "", "", "",
237 "", "", "", "", "", "", "", "",
238 "", "", "", "", "", "", "", "",
240 "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
241 "", "", "SD0-DET", "", "", "", "", "",
242 "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
243 "LED1", "", "", "", "", "", "", "",
245 "", "", "", "IO-GCLK", "", "", "", "",
246 "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
247 "SPI-MISO", "SPI-CE1", "",
248 "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
249 "", "", "", "", "", "", "", "";
252 #include "axp209.dtsi"
256 regulator-min-microvolt = <1000000>;
257 regulator-max-microvolt = <1400000>;
258 regulator-name = "vdd-cpu";
263 regulator-min-microvolt = <1000000>;
264 regulator-max-microvolt = <1400000>;
265 regulator-name = "vdd-int-dll";
269 regulator-name = "vdd-rtc";
274 regulator-min-microvolt = <3000000>;
275 regulator-max-microvolt = <3000000>;
276 regulator-name = "avcc";
292 pinctrl-names = "default";
293 pinctrl-0 = <&spi0_pi_pins>,
300 pinctrl-names = "default";
301 pinctrl-0 = <&uart0_pb_pins>;
306 pinctrl-names = "default";
307 pinctrl-0 = <&uart3_ph_pins>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&uart7_pi_pins>;
327 usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
328 usb0_vbus_power-supply = <&usb_power_supply>;
329 usb0_vbus-supply = <®_usb0_vbus>;
330 usb1_vbus-supply = <®_usb1_vbus>;
331 usb2_vbus-supply = <®_usb2_vbus>;