2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
4 * Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
53 model = "LeMaker Banana Pi";
54 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
63 stdout-path = "serial0:115200n8";
67 compatible = "gpio-leds";
68 pinctrl-names = "default";
69 pinctrl-0 = <&led_pins_bananapi>;
72 label = "bananapi:green:usr";
73 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
77 reg_gmac_3v3: gmac-3v3 {
78 compatible = "regulator-fixed";
79 pinctrl-names = "default";
80 pinctrl-0 = <&gmac_power_pin_bananapi>;
81 regulator-name = "gmac-3v3";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
84 startup-delay-us = <100000>;
86 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
99 cpu-supply = <®_dcdc2>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&gmac_pins_rgmii_a>;
125 phy-supply = <®_gmac_3v3>;
128 phy1: ethernet-phy@1 {
134 pinctrl-names = "default";
135 pinctrl-0 = <&i2c0_pins_a>;
140 interrupt-parent = <&nmi_intc>;
141 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
146 pinctrl-names = "default";
147 pinctrl-0 = <&i2c2_pins_a>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&ir0_rx_pins_a>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
160 vmmc-supply = <®_vcc3v3>;
162 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
180 usb0_id_detect_pin: usb0_id_detect_pin@0 {
182 function = "gpio_in";
186 mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
188 function = "gpio_in";
192 gmac_power_pin_bananapi: gmac_power_pin@0 {
194 function = "gpio_out";
197 led_pins_bananapi: led_pins@0 {
199 function = "gpio_out";
203 #include "axp209.dtsi"
207 regulator-min-microvolt = <1000000>;
208 regulator-max-microvolt = <1400000>;
209 regulator-name = "vdd-cpu";
214 regulator-min-microvolt = <1000000>;
215 regulator-max-microvolt = <1400000>;
216 regulator-name = "vdd-int-dll";
220 regulator-name = "vdd-rtc";
225 regulator-min-microvolt = <3000000>;
226 regulator-max-microvolt = <3000000>;
227 regulator-name = "avcc";
243 pinctrl-names = "default";
244 pinctrl-0 = <&spi0_pins_a>,
251 pinctrl-names = "default";
252 pinctrl-0 = <&uart0_pins_a>;
257 pinctrl-names = "default";
258 pinctrl-0 = <&uart3_pins_b>;
263 pinctrl-names = "default";
264 pinctrl-0 = <&uart7_pins_a>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&usb0_id_detect_pin>;
280 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
281 usb0_vbus_power-supply = <&usb_power_supply>;
282 usb0_vbus-supply = <®_usb0_vbus>;
283 usb1_vbus-supply = <®_usb1_vbus>;
284 usb2_vbus-supply = <®_usb2_vbus>;