2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
4 * Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
53 model = "LeMaker Banana Pi";
54 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
63 stdout-path = "serial0:115200n8";
67 compatible = "gpio-leds";
68 pinctrl-names = "default";
69 pinctrl-0 = <&led_pins_bananapi>;
72 label = "bananapi:green:usr";
73 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
77 reg_gmac_3v3: gmac-3v3 {
78 compatible = "regulator-fixed";
79 pinctrl-names = "default";
80 pinctrl-0 = <&gmac_power_pin_bananapi>;
81 regulator-name = "gmac-3v3";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
84 startup-delay-us = <100000>;
86 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
99 cpu-supply = <®_dcdc2>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&gmac_pins_rgmii_a>;
125 phy-supply = <®_gmac_3v3>;
128 phy1: ethernet-phy@1 {
134 pinctrl-names = "default";
135 pinctrl-0 = <&i2c0_pins_a>;
140 interrupt-parent = <&nmi_intc>;
141 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
146 pinctrl-names = "default";
147 pinctrl-0 = <&i2c2_pins_a>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&ir0_rx_pins_a>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
160 vmmc-supply = <®_vcc3v3>;
162 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
182 "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
183 "ETXD2", "ETXD1", "ETXD0",
184 "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
185 "ETXEN", "ETXCK", "ECRS",
186 "ECOL", "ETXERR", "", "", "", "", "", "",
187 "", "", "", "", "", "", "", "",
189 "PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
190 "", "USB0-DRV", "", "", "", "", "", "",
191 "", "", "", "", "SCL", "SDA", "", "",
192 "", "", "", "", "", "", "", "",
194 "", "", "", "", "", "", "", "",
195 "", "", "", "", "", "", "", "",
196 "", "", "", "", "", "", "", "",
197 "", "", "", "", "", "", "", "",
199 "", "", "", "", "", "", "", "",
200 "", "", "", "", "", "", "", "",
201 "", "", "", "", "", "", "", "",
202 "", "", "", "", "", "", "", "",
204 "", "", "", "", "", "", "", "",
205 "", "", "", "", "", "", "", "",
206 "", "", "", "", "", "", "", "",
207 "", "", "", "", "", "", "", "",
209 "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
211 "", "", "", "", "", "", "", "",
212 "", "", "", "", "", "", "", "",
213 "", "", "", "", "", "", "", "",
215 "", "", "", "", "", "", "", "",
216 "", "", "", "", "", "", "", "",
217 "", "", "", "", "", "", "", "",
218 "", "", "", "", "", "", "", "",
220 "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
221 "", "", "SD0-DET", "", "", "", "", "",
222 "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
223 "LED1", "", "", "", "", "", "", "",
225 "", "", "", "IO-GCLK", "", "", "", "",
226 "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
227 "SPI-MISO", "SPI-CE1", "",
228 "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
229 "", "", "", "", "", "", "", "";
231 usb0_id_detect_pin: usb0_id_detect_pin@0 {
233 function = "gpio_in";
237 mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
239 function = "gpio_in";
243 gmac_power_pin_bananapi: gmac_power_pin@0 {
245 function = "gpio_out";
248 led_pins_bananapi: led_pins@0 {
250 function = "gpio_out";
254 #include "axp209.dtsi"
258 regulator-min-microvolt = <1000000>;
259 regulator-max-microvolt = <1400000>;
260 regulator-name = "vdd-cpu";
265 regulator-min-microvolt = <1000000>;
266 regulator-max-microvolt = <1400000>;
267 regulator-name = "vdd-int-dll";
271 regulator-name = "vdd-rtc";
276 regulator-min-microvolt = <3000000>;
277 regulator-max-microvolt = <3000000>;
278 regulator-name = "avcc";
294 pinctrl-names = "default";
295 pinctrl-0 = <&spi0_pins_a>,
302 pinctrl-names = "default";
303 pinctrl-0 = <&uart0_pins_a>;
308 pinctrl-names = "default";
309 pinctrl-0 = <&uart3_pins_b>;
314 pinctrl-names = "default";
315 pinctrl-0 = <&uart7_pins_a>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&usb0_id_detect_pin>;
331 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
332 usb0_vbus_power-supply = <&usb_power_supply>;
333 usb0_vbus-supply = <®_usb0_vbus>;
334 usb1_vbus-supply = <®_usb1_vbus>;
335 usb2_vbus-supply = <®_usb2_vbus>;