2 * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
3 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
9 #include <dt-bindings/clock/stih407-clks.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/media/c8sectpfe.h>
14 compatible = "gpio-leds";
16 label = "Front Panel LED";
17 gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
18 linux,default-trigger = "heartbeat";
21 gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
22 default-state = "off";
27 compatible = "simple-audio-card";
28 simple-audio-card,name = "STI-B2120";
33 simple-audio-card,dai-link@0 {
39 sound-dai = <&sti_uni_player0>;
43 sound-dai = <&sti_hdmi>;
47 simple-audio-card,dai-link@1 {
52 frame-inversion = <1>;
54 sound-dai = <&sti_uni_player2>;
58 sound-dai = <&sti_sasg_codec 1>;
62 simple-audio-card,dai-link@2 {
68 sound-dai = <&sti_uni_player3>;
72 sound-dai = <&sti_sasg_codec 0>;
78 sbc_serial0: serial@9530000 {
92 clock-frequency = <100000>;
93 st,i2c-min-scl-pulse-width-us = <0>;
94 st,i2c-min-sda-pulse-width-us = <5>;
99 clock-frequency = <100000>;
100 st,i2c-min-scl-pulse-width-us = <0>;
101 st,i2c-min-sda-pulse-width-us = <5>;
116 mmc0: sdhci@9060000 {
121 mmc1: sdhci@9080000 {
126 hdmiddc: i2c@9541000 {
128 /* HDMI V1.3a supports Standard mode only */
129 clock-frequency = <100000>;
130 st,i2c-min-scl-pulse-width-us = <0>;
131 st,i2c-min-sda-pulse-width-us = <5>;
134 miphy28lp_phy: miphy28lp@0 {
136 phy_port0: port@9b22000 {
140 phy_port1: port@9b2a000 {
145 st_dwc3: dwc3@8f94000 {
149 ethernet0: dwmac@9630000 {
150 st,tx-retime-src = "clkgen";
153 fixed-link = <0 1 1000 0 0>;
157 compatible = "st,stih407-c8sectpfe";
159 reg = <0x08a20000 0x10000>,
161 reg-names = "c8sectpfe", "c8sectpfe-ram";
162 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
163 <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
164 interrupt-names = "c8sectpfe-error-irq",
165 "c8sectpfe-idle-irq";
166 pinctrl-0 = <&pinctrl_tsin0_serial>;
167 pinctrl-1 = <&pinctrl_tsin0_parallel>;
168 pinctrl-2 = <&pinctrl_tsin3_serial>;
169 pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
170 pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
171 pinctrl-names = "tsin0-serial",
176 clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
177 clock-names = "c8sectpfe";
179 /* tsin0 is TSA on NIMA */
184 reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
185 dvb-card = <STV0367_TDA18212_NIMA_1>;
189 sti_uni_player0: sti-uni-player@8d80000 {
193 sti_uni_player2: sti-uni-player@8d82000 {
197 sti_uni_player3: sti-uni-player@8d85000 {
201 syscfg_core: core-syscfg@92b0000 {
202 sti_sasg_codec: sti-sasg-codec {
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_spdif_out>;