1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
4 * Author: Patrice Chotard <patrice.chotard@st.com>
7 #include "stih410.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
11 model = "STiH410 B2260";
12 compatible = "st,stih410-b2260", "st,stih410";
19 device_type = "memory";
20 reg = <0x40000000 0x40000000>;
25 ethernet0 = ðernet0;
29 compatible = "gpio-leds";
31 label = "User_green_1";
32 gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
33 linux,default-trigger = "heartbeat";
34 default-state = "off";
38 label = "User_green_2";
39 gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
40 default-state = "off";
44 label = "User_green_3";
45 gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
46 default-state = "off";
50 label = "User_green_4";
51 gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
52 default-state = "off";
57 compatible = "simple-audio-card";
58 simple-audio-card,name = "STI-B2260";
63 simple-audio-card,dai-link@0 {
69 sound-dai = <&sti_uni_player0>;
73 sound-dai = <&sti_hdmi>;
79 /* Low speed expansion connector */
80 uart0: serial@9830000 {
82 pinctrl-names = "default", "no-hw-flowctrl";
83 pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
84 pinctrl-1 = <&pinctrl_serial0>;
85 rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
90 /* Low speed expansion connector */
91 uart1: serial@9831000 {
96 /* Low speed expansion connector */
99 cs-gpios = <&pio30 3 0>;
103 /* Low speed expansion connector */
109 /* Low speed expansion connector */
115 /* high speed expansion connector */
118 pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
122 /* high speed expansion connector */
125 pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
129 mmc0: sdhci@9060000 {
130 pinctrl-0 = <&pinctrl_sd0>;
135 /* high speed expansion connector */
136 mmc1: sdhci@9080000 {
148 usb2_picophy1: phy2@0 {
152 usb2_picophy2: phy3@0 {
172 st_dwc3: dwc3@8f94000 {
176 ethernet0: dwmac@9630000 {
178 pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
180 snps,reset-gpio = <&pio0 7 0>;
181 snps,reset-active-low;
182 snps,reset-delays-us = <0 10000 1000000>;
187 sti_uni_player0: sti-uni-player@8d80000 {
191 hdmiddc: i2c@9541000 {
192 /* HDMI V1.3a supports Standard mode only */
193 clock-frequency = <100000>;
194 st,i2c-min-scl-pulse-width-us = <0>;
195 st,i2c-min-sda-pulse-width-us = <5>;
199 miphy28lp_phy: miphy28lp@0 {
201 phy_port1: port@9b2a000 {
206 sata1: sata@9b28000 {