1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
5 * Device Tree for the HREF+ prior to the v60 variant.
8 #include "ste-href-ab8500.dtsi"
9 #include "ste-href.dtsi"
14 gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>;
19 /* Enable UART1 on this board */
26 compatible = "ti,tps61052";
31 compatible = "toshiba,tc35892";
33 interrupt-parent = <&gpio6>;
34 interrupts = <25 IRQ_TYPE_EDGE_RISING>;
35 pinctrl-names = "default";
36 pinctrl-0 = <&tc35892_hrefprev60_mode>;
39 #interrupt-cells = <1>;
41 tc3589x_gpio: tc3589x_gpio {
42 compatible = "tc3589x-gpio";
46 #interrupt-cells = <2>;
55 * On the first generation boards, this SSP/SPI port was connected
58 pinctrl-names = "default";
59 pinctrl-0 = <&ssp0_hrefprev60_mode>;
63 // External Micro SD slot
65 cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
69 /* Set this up using hogs */
70 pinctrl-names = "default";
71 pinctrl-0 = <&ipgpio_hrefprev60_mode>;
74 ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
80 pins = "GPIO145_C13"; /* RXD */
81 ste,config = <&in_pd>;
87 /* This additional pin needed on early MOP500 and HREFs previous to v60 */
88 sdi0_default_mode: sdi0_default {
91 groups = "mc0dat31dir_a_1";
94 pins = "GPIO21_AB3"; /* DAT31DIR */
95 ste,config = <&out_hi>;
101 tc35892_hrefprev60_mode: tc35892_hrefprev60 {
103 pins = "GPIO217_AH12";
104 ste,config = <&gpio_in_pu>;
109 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
112 groups = "ipgpio0_c_1", "ipgpio1_c_1";
115 pins = "GPIO6_AF6", "GPIO7_AG5";
116 ste,config = <&in_pu>;