arch/arm/boot/dts/ste-href.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2012 ST-Ericsson AB
   4  */
   5
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include "ste-href-family-pinctrl.dtsi"
   8
   9 / {
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x20000000>;
  13         };
  14
  15         soc {
  16                 uart@80120000 {
  17                         pinctrl-names = "default", "sleep";
  18                         pinctrl-0 = <&u0_a_1_default>;
  19                         pinctrl-1 = <&u0_a_1_sleep>;
  20                         status = "okay";
  21                 };
  22
  23                 /* This UART is unused and thus left disabled */
  24                 uart@80121000 {
  25                         pinctrl-names = "default", "sleep";
  26                         pinctrl-0 = <&u1rxtx_a_1_default>;
  27                         pinctrl-1 = <&u1rxtx_a_1_sleep>;
  28                 };
  29
  30                 uart@80007000 {
  31                         pinctrl-names = "default", "sleep";
  32                         pinctrl-0 = <&u2rxtx_c_1_default>;
  33                         pinctrl-1 = <&u2rxtx_c_1_sleep>;
  34                         status = "okay";
  35                 };
  36
  37                 i2c@80004000 {
  38                         pinctrl-names = "default","sleep";
  39                         pinctrl-0 = <&i2c0_a_1_default>;
  40                         pinctrl-1 = <&i2c0_a_1_sleep>;
  41                         status = "okay";
  42                 };
  43
  44                 i2c@80122000 {
  45                         pinctrl-names = "default","sleep";
  46                         pinctrl-0 = <&i2c1_b_2_default>;
  47                         pinctrl-1 = <&i2c1_b_2_sleep>;
  48                         status = "okay";
  49                 };
  50
  51                 i2c@80128000 {
  52                         pinctrl-names = "default","sleep";
  53                         pinctrl-0 = <&i2c2_b_2_default>;
  54                         pinctrl-1 = <&i2c2_b_2_sleep>;
  55                         status = "okay";
  56                         lp5521@33 {
  57                                 compatible = "national,lp5521";
  58                                 reg = <0x33>;
  59                                 label = "lp5521_pri";
  60                                 clock-mode = /bits/ 8 <2>;
  61                                 chan0 {
  62                                         led-cur = /bits/ 8 <0x2f>;
  63                                         max-cur = /bits/ 8 <0x5f>;
  64                                         linux,default-trigger = "heartbeat";
  65                                 };
  66                                 chan1 {
  67                                         led-cur = /bits/ 8 <0x2f>;
  68                                         max-cur = /bits/ 8 <0x5f>;
  69                                 };
  70                                 chan2 {
  71                                         led-cur = /bits/ 8 <0x2f>;
  72                                         max-cur = /bits/ 8 <0x5f>;
  73                                 };
  74                         };
  75                         lp5521@34 {
  76                                 compatible = "national,lp5521";
  77                                 reg = <0x34>;
  78                                 label = "lp5521_sec";
  79                                 clock-mode = /bits/ 8 <2>;
  80                                 chan0 {
  81                                         led-cur = /bits/ 8 <0x2f>;
  82                                         max-cur = /bits/ 8 <0x5f>;
  83                                 };
  84                                 chan1 {
  85                                         led-cur = /bits/ 8 <0x2f>;
  86                                         max-cur = /bits/ 8 <0x5f>;
  87                                 };
  88                                 chan2 {
  89                                         led-cur = /bits/ 8 <0x2f>;
  90                                         max-cur = /bits/ 8 <0x5f>;
  91                                 };
  92                         };
  93                         bh1780@29 {
  94                                 compatible = "rohm,bh1780gli";
  95                                 reg = <0x29>;
  96                         };
  97                 };
  98
  99                 i2c@80110000 {
 100                         pinctrl-names = "default","sleep";
 101                         pinctrl-0 = <&i2c3_c_2_default>;
 102                         pinctrl-1 = <&i2c3_c_2_sleep>;
 103                         status = "okay";
 104                 };
 105
 106                 /* ST6G3244ME level translator for 1.8/2.9 V */
 107                 vmmci: regulator-gpio {
 108                         compatible = "regulator-gpio";
 109
 110                         regulator-min-microvolt = <1800000>;
 111                         regulator-max-microvolt = <2900000>;
 112                         regulator-name = "mmci-reg";
 113                         regulator-type = "voltage";
 114
 115                         startup-delay-us = <100>;
 116
 117                         states = <1800000 0x1
 118                                   2900000 0x0>;
 119                 };
 120
 121                 // External Micro SD slot
 122                 sdi0_per1@80126000 {
 123                         arm,primecell-periphid = <0x10480180>;
 124                         max-frequency = <100000000>;
 125                         bus-width = <4>;
 126                         cap-sd-highspeed;
 127                         cap-mmc-highspeed;
 128                         sd-uhs-sdr12;
 129                         sd-uhs-sdr25;
 130                         full-pwr-cycle;
 131                         st,sig-dir-dat0;
 132                         st,sig-dir-dat2;
 133                         st,sig-dir-cmd;
 134                         st,sig-pin-fbclk;
 135                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 136                         vqmmc-supply = <&vmmci>;
 137                         pinctrl-names = "default", "sleep";
 138                         pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
 139                         pinctrl-1 = <&mc0_a_1_sleep>;
 140
 141                         status = "okay";
 142                 };
 143
 144                 // WLAN SDIO channel
 145                 sdi1_per2@80118000 {
 146                         arm,primecell-periphid = <0x10480180>;
 147                         max-frequency = <100000000>;
 148                         bus-width = <4>;
 149                         non-removable;
 150                         pinctrl-names = "default", "sleep";
 151                         pinctrl-0 = <&mc1_a_1_default>;
 152                         pinctrl-1 = <&mc1_a_1_sleep>;
 153
 154                         status = "okay";
 155                 };
 156
 157                 // PoP:ed eMMC
 158                 sdi2_per3@80005000 {
 159                         arm,primecell-periphid = <0x10480180>;
 160                         max-frequency = <100000000>;
 161                         bus-width = <8>;
 162                         cap-mmc-highspeed;
 163                         non-removable;
 164                         vmmc-supply = <&db8500_vsmps2_reg>;
 165                         pinctrl-names = "default", "sleep";
 166                         pinctrl-0 = <&mc2_a_1_default>;
 167                         pinctrl-1 = <&mc2_a_1_sleep>;
 168
 169                         status = "okay";
 170                 };
 171
 172                 // On-board eMMC
 173                 sdi4_per2@80114000 {
 174                         arm,primecell-periphid = <0x10480180>;
 175                         max-frequency = <100000000>;
 176                         bus-width = <8>;
 177                         cap-mmc-highspeed;
 178                         non-removable;
 179                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 180                         pinctrl-names = "default", "sleep";
 181                         pinctrl-0 = <&mc4_a_1_default>;
 182                         pinctrl-1 = <&mc4_a_1_sleep>;
 183
 184                         status = "okay";
 185                 };
 186
 187                 msp0: msp@80123000 {
 188                         pinctrl-names = "default";
 189                         pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 190                         status = "okay";
 191                 };
 192
 193                 msp1: msp@80124000 {
 194                         pinctrl-names = "default";
 195                         pinctrl-0 = <&msp1txrx_a_1_default>;
 196                         status = "okay";
 197                 };
 198
 199                 msp2: msp@80117000 {
 200                         pinctrl-names = "default";
 201                         pinctrl-0 = <&msp2_a_1_default>;
 202                 };
 203
 204                 msp3: msp@80125000 {
 205                         status = "okay";
 206                 };
 207
 208                 prcmu@80157000 {
 209                         ab8500 {
 210                                 ab8500-gpio {
 211                                 };
 212
 213                                 ab8500_usb {
 214                                         pinctrl-names = "default", "sleep";
 215                                         pinctrl-0 = <&usb_a_1_default>;
 216                                         pinctrl-1 = <&usb_a_1_sleep>;
 217                                 };
 218
 219                                 ab8500-regulators {
 220                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 221                                                 regulator-name = "V-DISPLAY";
 222                                         };
 223
 224                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 225                                                 regulator-name = "V-eMMC1";
 226                                         };
 227
 228                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 229                                                 regulator-name = "V-MMC-SD";
 230                                         };
 231
 232                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 233                                                 regulator-name = "V-INTCORE";
 234                                         };
 235
 236                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 237                                                 regulator-name = "V-TVOUT";
 238                                         };
 239
 240                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 241                                                 regulator-name = "V-AUD";
 242                                         };
 243
 244                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 245                                                 regulator-name = "V-AMIC1";
 246                                         };
 247
 248                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 249                                                 regulator-name = "V-AMIC2";
 250                                         };
 251
 252                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 253                                                 regulator-name = "V-DMIC";
 254                                         };
 255
 256                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 257                                                 regulator-name = "V-CSI/DSI";
 258                                         };
 259                                 };
 260                         };
 261                 };
 262
 263                 pinctrl {
 264                         sdi0 {
 265                                 sdi0_default_mode: sdi0_default {
 266                                         /* Some boards set additional settings here */
 267                                 };
 268                         };
 269                 };
 270
 271                 mcde@a0350000 {
 272                         pinctrl-names = "default", "sleep";
 273                         pinctrl-0 = <&lcd_default_mode>;
 274                         pinctrl-1 = <&lcd_sleep_mode>;
 275                 };
 276         };
 277 };