arch/arm/boot/dts/spear1340.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * DTS file for all SPEAr1340 SoCs
   4  *
   5  * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
   6  */
   7
   8 /include/ "spear13xx.dtsi"
   9
  10 / {
  11         compatible = "st,spear1340";
  12
  13         ahb {
  14
  15                 spics: spics@e0700000{
  16                         compatible = "st,spear-spics-gpio";
  17                         reg = <0xe0700000 0x1000>;
  18                         st-spics,peripcfg-reg = <0x42c>;
  19                         st-spics,sw-enable-bit = <21>;
  20                         st-spics,cs-value-bit = <20>;
  21                         st-spics,cs-enable-mask = <3>;
  22                         st-spics,cs-enable-shift = <18>;
  23                         gpio-controller;
  24                         #gpio-cells = <2>;
  25                         status = "disabled";
  26                 };
  27
  28                 miphy0: miphy@eb800000 {
  29                         compatible = "st,spear1340-miphy";
  30                         reg = <0xeb800000 0x4000>;
  31                         misc = <&misc>;
  32                         #phy-cells = <1>;
  33                         status = "disabled";
  34                 };
  35
  36                 ahci0: ahci@b1000000 {
  37                         compatible = "snps,spear-ahci";
  38                         reg = <0xb1000000 0x10000>;
  39                         interrupts = <0 72 0x4>;
  40                         phys = <&miphy0 0>;
  41                         phy-names = "sata-phy";
  42                         status = "disabled";
  43                 };
  44
  45                 pcie0: pcie@b1000000 {
  46                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
  47                         reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
  48                         reg-names = "dbi", "config";
  49                         interrupts = <0 68 0x4>;
  50                         interrupt-map-mask = <0 0 0 0>;
  51                         interrupt-map = <0x0 0 &gic 0 68 0x4>;
  52                         num-lanes = <1>;
  53                         phys = <&miphy0 1>;
  54                         phy-names = "pcie-phy";
  55                         #address-cells = <3>;
  56                         #size-cells = <2>;
  57                         device_type = "pci";
  58                         ranges = <0x81000000 0 0         0x80020000 0 0x00010000   /* downstream I/O */
  59                                 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
  60                         bus-range = <0x00 0xff>;
  61                         status = "disabled";
  62                 };
  63
  64                 i2s-play@b2400000 {
  65                         compatible = "snps,designware-i2s";
  66                         reg = <0xb2400000 0x10000>;
  67                         interrupt-names = "play_irq";
  68                         interrupts = <0 98 0x4
  69                                       0 99 0x4>;
  70                         play;
  71                         channel = <8>;
  72                         status = "disabled";
  73                 };
  74
  75                 i2s-rec@b2000000 {
  76                         compatible = "snps,designware-i2s";
  77                         reg = <0xb2000000 0x10000>;
  78                         interrupt-names = "record_irq";
  79                         interrupts = <0 100  0x4
  80                                       0 101 0x4>;
  81                         record;
  82                         channel = <8>;
  83                         status = "disabled";
  84                 };
  85
  86                 pinmux: pinmux@e0700000 {
  87                         compatible = "st,spear1340-pinmux";
  88                         reg = <0xe0700000 0x1000>;
  89                         #gpio-range-cells = <3>;
  90                 };
  91
  92                 pwm: pwm@e0180000 {
  93                         compatible ="st,spear13xx-pwm";
  94                         reg = <0xe0180000 0x1000>;
  95                         #pwm-cells = <2>;
  96                         status = "disabled";
  97                 };
  98
  99                 spdif-in@d0100000 {
 100                         compatible = "st,spdif-in";
 101                         reg = < 0xd0100000 0x20000
 102                                 0xd0110000 0x10000 >;
 103                         interrupts = <0 84 0x4>;
 104                         status = "disabled";
 105                 };
 106
 107                 spdif-out@d0000000 {
 108                         compatible = "st,spdif-out";
 109                         reg = <0xd0000000 0x20000>;
 110                         interrupts = <0 85 0x4>;
 111                         status = "disabled";
 112                 };
 113
 114                 spi1: spi@5d400000 {
 115                         compatible = "arm,pl022", "arm,primecell";
 116                         reg = <0x5d400000 0x1000>;
 117                         #address-cells = <1>;
 118                         #size-cells = <0>;
 119                         interrupts = <0 99 0x4>;
 120                         status = "disabled";
 121                 };
 122
 123                 apb {
 124                         i2c1: i2c@b4000000 {
 125                                 #address-cells = <1>;
 126                                 #size-cells = <0>;
 127                                 compatible = "snps,designware-i2c";
 128                                 reg = <0xb4000000 0x1000>;
 129                                 interrupts = <0 104 0x4>;
 130                                 write-16bit;
 131                                 status = "disabled";
 132                         };
 133
 134                         serial@b4100000 {
 135                                 compatible = "arm,pl011", "arm,primecell";
 136                                 reg = <0xb4100000 0x1000>;
 137                                 interrupts = <0 105 0x4>;
 138                                 status = "disabled";
 139                                 dmas = <&dwdma0 12 0 1>,
 140                                         <&dwdma0 13 1 0>;
 141                                 dma-names = "tx", "rx";
 142                         };
 143
 144                         thermal@e07008c4 {
 145                                 st,thermal-flags = <0x2a00>;
 146                         };
 147
 148                         gpiopinctrl: gpio@e2800000 {
 149                                 compatible = "st,spear-plgpio";
 150                                 reg = <0xe2800000 0x1000>;
 151                                 interrupts = <0 107 0x4>;
 152                                 #interrupt-cells = <1>;
 153                                 interrupt-controller;
 154                                 gpio-controller;
 155                                 #gpio-cells = <2>;
 156                                 gpio-ranges = <&pinmux 0 0 252>;
 157                                 status = "disabled";
 158
 159                                 st-plgpio,ngpio = <250>;
 160                                 st-plgpio,wdata-reg = <0x40>;
 161                                 st-plgpio,dir-reg = <0x00>;
 162                                 st-plgpio,ie-reg = <0x80>;
 163                                 st-plgpio,rdata-reg = <0x20>;
 164                                 st-plgpio,mis-reg = <0xa0>;
 165                                 st-plgpio,eit-reg = <0x60>;
 166                         };
 167                 };
 168         };
 169 };