1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Google Veyron (and derivatives) board device tree source
4 * Chromebook specific parts
6 * Copyright 2015 Google, Inc
9 #include <dt-bindings/clock/rockchip,rk808.h>
10 #include <dt-bindings/input/input.h>
11 #include "rk3288-veyron.dtsi"
12 #include "rk3288-veyron-analog-audio.dtsi"
13 #include "rk3288-veyron-sdmmc.dtsi"
17 /* Assign 20 so we don't get confused w/ builtin ones */
21 backlight: backlight {
22 compatible = "pwm-backlight";
26 16 17 18 19 20 21 22 23
27 24 25 26 27 28 29 30 31
28 32 33 34 35 36 37 38 39
29 40 41 42 43 44 45 46 47
30 48 49 50 51 52 53 54 55
31 56 57 58 59 60 61 62 63
32 64 65 66 67 68 69 70 71
33 72 73 74 75 76 77 78 79
34 80 81 82 83 84 85 86 87
35 88 89 90 91 92 93 94 95
36 96 97 98 99 100 101 102 103
37 104 105 106 107 108 109 110 111
38 112 113 114 115 116 117 118 119
39 120 121 122 123 124 125 126 127
40 128 129 130 131 132 133 134 135
41 136 137 138 139 140 141 142 143
42 144 145 146 147 148 149 150 151
43 152 153 154 155 156 157 158 159
44 160 161 162 163 164 165 166 167
45 168 169 170 171 172 173 174 175
46 176 177 178 179 180 181 182 183
47 184 185 186 187 188 189 190 191
48 192 193 194 195 196 197 198 199
49 200 201 202 203 204 205 206 207
50 208 209 210 211 212 213 214 215
51 216 217 218 219 220 221 222 223
52 224 225 226 227 228 229 230 231
53 232 233 234 235 236 237 238 239
54 240 241 242 243 244 245 246 247
55 248 249 250 251 252 253 254 255>;
56 default-brightness-level = <128>;
57 enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
58 pinctrl-names = "default";
60 pwms = <&pwm0 0 1000000 0>;
61 post-pwm-on-delay-ms = <10>;
62 pwm-off-delay-ms = <10>;
66 compatible = "gpio-charger";
67 charger-type = "mains";
68 gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
69 pinctrl-names = "default";
70 pinctrl-0 = <&ac_present_ap>;
73 lid_switch: lid-switch {
74 compatible = "gpio-keys";
75 pinctrl-names = "default";
76 pinctrl-0 = <&ap_lid_int_l>;
80 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
82 linux,code = <SW_LID>;
83 linux,input-type = <EV_SW>;
84 debounce-interval = <1>;
89 compatible ="innolux,n116bge", "simple-panel";
91 power-supply = <&vcc33_lcd>;
92 backlight = <&backlight>;
96 panel_in_edp: endpoint {
97 remote-endpoint = <&edp_out_panel>;
103 /* A non-regulated voltage from power supply or battery */
105 compatible = "regulator-fixed";
106 regulator-name = "vccsys";
111 vcc33_sys: vcc33-sys {
112 vin-supply = <&vccsys>;
116 vin-supply = <&vccsys>;
119 /* This turns on vbus for host1 (dwc2) */
120 vcc5_host1: vcc5-host1-regulator {
121 compatible = "regulator-fixed";
123 gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
124 pinctrl-names = "default";
125 pinctrl-0 = <&host1_pwr_en>;
126 regulator-name = "vcc5_host1";
131 /* This turns on vbus for otg for host mode (dwc2) */
132 vcc5v_otg: vcc5v-otg-regulator {
133 compatible = "regulator-fixed";
135 gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&usbotg_pwren_h>;
138 regulator-name = "vcc5_host2";
147 pinctrl-names = "default";
148 pinctrl-0 = <&edp_hpd>;
153 #address-cells = <1>;
155 edp_out_panel: endpoint@0 {
157 remote-endpoint = <&panel_in_edp>;
172 vcc11-supply = <&vcc_5v>;
175 vcc33_ccd: LDO_REG8 {
176 regulator-name = "vcc33_ccd";
179 regulator-min-microvolt = <3300000>;
180 regulator-max-microvolt = <3300000>;
181 regulator-state-mem {
182 regulator-off-in-suspend;
192 compatible = "google,cros-ec-spi";
194 google,cros-ec-spi-pre-delay = <30>;
195 interrupt-parent = <&gpio7>;
196 interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&ec_int>;
199 spi-max-frequency = <3000000>;
201 i2c_tunnel: i2c-tunnel {
202 compatible = "google,cros-ec-i2c-tunnel";
203 google,remote-bus = <0>;
204 #address-cells = <1>;
212 compatible = "elan,ekth3000";
214 interrupt-parent = <&gpio7>;
215 interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&trackpad_int>;
218 vcc-supply = <&vcc33_io>;
233 /* Common for sleep and wake, but no owners */
242 /* Common for sleep and wake, but no owners */
253 rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
258 ap_lid_int_l: ap-lid-int-l {
259 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
264 ac_present_ap: ac-present-ap {
265 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
271 rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
276 suspend_l_wake: suspend-l-wake {
277 rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
280 suspend_l_sleep: suspend-l-sleep {
281 rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>;
286 trackpad_int: trackpad-int {
287 rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
292 host1_pwr_en: host1-pwr-en {
293 rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
296 usbotg_pwren_h: usbotg-pwren-h {
297 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
302 #include "cros-ec-keyboard.dtsi"