1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/interrupt-controller/irq.h>
5 #include <dt-bindings/interrupt-controller/arm-gic.h>
6 #include <dt-bindings/pinctrl/rockchip.h>
7 #include <dt-bindings/clock/rk3036-cru.h>
8 #include <dt-bindings/soc/rockchip,boot-mode.h>
14 compatible = "rockchip,rk3036";
16 interrupt-parent = <&gic>;
34 enable-method = "rockchip,rk3036-smp";
38 compatible = "arm,cortex-a7";
40 resets = <&cru SRST_CORE0>;
45 clock-latency = <40000>;
46 clocks = <&cru ARMCLK>;
51 compatible = "arm,cortex-a7";
53 resets = <&cru SRST_CORE1>;
58 compatible = "arm,cortex-a7-pmu";
59 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
60 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
61 interrupt-affinity = <&cpu0>, <&cpu1>;
65 compatible = "rockchip,display-subsystem";
70 compatible = "arm,armv7-timer";
71 arm,cpu-registers-not-fw-configured;
72 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
73 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
74 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
75 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
76 clock-frequency = <24000000>;
80 compatible = "fixed-clock";
81 clock-frequency = <24000000>;
82 clock-output-names = "xin24m";
86 bus_intmem: sram@10080000 {
87 compatible = "mmio-sram";
88 reg = <0x10080000 0x2000>;
91 ranges = <0 0x10080000 0x2000>;
94 compatible = "rockchip,rk3066-smp-sram";
100 compatible = "rockchip,rk3036-mali", "arm,mali-400";
101 reg = <0x10090000 0x10000>;
102 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
103 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
104 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
105 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
106 interrupt-names = "gp",
110 assigned-clocks = <&cru SCLK_GPU>;
111 assigned-clock-rates = <100000000>;
112 clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
113 clock-names = "bus", "core";
114 resets = <&cru SRST_GPU>;
119 compatible = "rockchip,rk3036-vop";
120 reg = <0x10118000 0x19c>;
121 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
122 clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
123 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
124 resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
125 reset-names = "axi", "ahb", "dclk";
130 #address-cells = <1>;
132 vop_out_hdmi: endpoint@0 {
134 remote-endpoint = <&hdmi_in_vop>;
139 vop_mmu: iommu@10118300 {
140 compatible = "rockchip,iommu";
141 reg = <0x10118300 0x100>;
142 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
143 interrupt-names = "vop_mmu";
144 clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
145 clock-names = "aclk", "iface";
150 gic: interrupt-controller@10139000 {
151 compatible = "arm,gic-400";
152 interrupt-controller;
153 #interrupt-cells = <3>;
154 #address-cells = <0>;
156 reg = <0x10139000 0x1000>,
160 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
163 usb_otg: usb@10180000 {
164 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
166 reg = <0x10180000 0x40000>;
167 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
168 clocks = <&cru HCLK_OTG0>;
171 g-np-tx-fifo-size = <16>;
172 g-rx-fifo-size = <275>;
173 g-tx-fifo-size = <256 128 128 64 64 32>;
177 usb_host: usb@101c0000 {
178 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
180 reg = <0x101c0000 0x40000>;
181 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
182 clocks = <&cru HCLK_OTG1>;
188 emac: ethernet@10200000 {
189 compatible = "rockchip,rk3036-emac", "snps,arc-emac";
190 reg = <0x10200000 0x4000>;
191 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
192 #address-cells = <1>;
194 rockchip,grf = <&grf>;
195 clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
196 clock-names = "hclk", "macref", "macclk";
198 * Fix the emac parent clock is DPLL instead of APLL.
199 * since that will cause some unstable things if the cpufreq
200 * is working. (e.g: the accurate 50MHz what mac_ref need)
202 assigned-clocks = <&cru SCLK_MACPLL>;
203 assigned-clock-parents = <&cru PLL_DPLL>;
209 sdmmc: mmc@10214000 {
210 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
211 reg = <0x10214000 0x4000>;
212 clock-frequency = <37500000>;
213 max-frequency = <37500000>;
214 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
215 clock-names = "biu", "ciu";
216 fifo-depth = <0x100>;
217 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
218 resets = <&cru SRST_MMC0>;
219 reset-names = "reset";
224 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
225 reg = <0x10218000 0x4000>;
226 max-frequency = <37500000>;
227 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
228 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
229 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
230 fifo-depth = <0x100>;
231 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
232 resets = <&cru SRST_SDIO>;
233 reset-names = "reset";
238 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
239 reg = <0x1021c000 0x4000>;
240 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
243 clock-frequency = <37500000>;
244 max-frequency = <37500000>;
245 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
246 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
247 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
248 rockchip,default-sample-phase = <158>;
252 fifo-depth = <0x100>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
257 resets = <&cru SRST_EMMC>;
258 reset-names = "reset";
263 compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
264 reg = <0x10220000 0x4000>;
265 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
266 clock-names = "i2s_clk", "i2s_hclk";
267 clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
268 dmas = <&pdma 0>, <&pdma 1>;
269 dma-names = "tx", "rx";
270 pinctrl-names = "default";
271 pinctrl-0 = <&i2s_bus>;
272 #sound-dai-cells = <0>;
276 nfc: nand-controller@10500000 {
277 compatible = "rockchip,rk3036-nfc",
278 "rockchip,rk2928-nfc";
279 reg = <0x10500000 0x4000>;
280 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
281 clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
282 clock-names = "ahb", "nfc";
283 assigned-clocks = <&cru SCLK_NANDC>;
284 assigned-clock-rates = <150000000>;
285 pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
286 &flash_rdn &flash_rdy &flash_wrn>;
287 pinctrl-names = "default";
291 cru: clock-controller@20000000 {
292 compatible = "rockchip,rk3036-cru";
293 reg = <0x20000000 0x1000>;
294 rockchip,grf = <&grf>;
297 assigned-clocks = <&cru PLL_GPLL>;
298 assigned-clock-rates = <594000000>;
301 grf: syscon@20008000 {
302 compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
303 reg = <0x20008000 0x1000>;
306 compatible = "syscon-reboot-mode";
308 mode-normal = <BOOT_NORMAL>;
309 mode-recovery = <BOOT_RECOVERY>;
310 mode-bootloader = <BOOT_FASTBOOT>;
311 mode-loader = <BOOT_BL_DOWNLOAD>;
315 acodec: acodec-ana@20030000 {
316 compatible = "rk3036-codec";
317 reg = <0x20030000 0x4000>;
318 rockchip,grf = <&grf>;
319 clock-names = "acodec_pclk";
320 clocks = <&cru PCLK_ACODEC>;
324 hdmi: hdmi@20034000 {
325 compatible = "rockchip,rk3036-inno-hdmi";
326 reg = <0x20034000 0x4000>;
327 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
328 clocks = <&cru PCLK_HDMI>;
329 clock-names = "pclk";
330 rockchip,grf = <&grf>;
331 pinctrl-names = "default";
332 pinctrl-0 = <&hdmi_ctl>;
336 #address-cells = <1>;
338 hdmi_in_vop: endpoint@0 {
340 remote-endpoint = <&vop_out_hdmi>;
345 timer: timer@20044000 {
346 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
347 reg = <0x20044000 0x20>;
348 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
349 clocks = <&xin24m>, <&cru PCLK_TIMER>;
350 clock-names = "timer", "pclk";
354 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
355 reg = <0x20050000 0x10>;
357 clocks = <&cru PCLK_PWM>;
359 pinctrl-names = "default";
360 pinctrl-0 = <&pwm0_pin>;
365 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
366 reg = <0x20050010 0x10>;
368 clocks = <&cru PCLK_PWM>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&pwm1_pin>;
376 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
377 reg = <0x20050020 0x10>;
379 clocks = <&cru PCLK_PWM>;
381 pinctrl-names = "default";
382 pinctrl-0 = <&pwm2_pin>;
387 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
388 reg = <0x20050030 0x10>;
390 clocks = <&cru PCLK_PWM>;
392 pinctrl-names = "default";
393 pinctrl-0 = <&pwm3_pin>;
398 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
399 reg = <0x20056000 0x1000>;
400 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
401 #address-cells = <1>;
404 clocks = <&cru PCLK_I2C1>;
405 pinctrl-names = "default";
406 pinctrl-0 = <&i2c1_xfer>;
411 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
412 reg = <0x2005a000 0x1000>;
413 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
414 #address-cells = <1>;
417 clocks = <&cru PCLK_I2C2>;
418 pinctrl-names = "default";
419 pinctrl-0 = <&i2c2_xfer>;
423 uart0: serial@20060000 {
424 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
425 reg = <0x20060000 0x100>;
426 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
429 clock-frequency = <24000000>;
430 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
431 clock-names = "baudclk", "apb_pclk";
432 pinctrl-names = "default";
433 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
437 uart1: serial@20064000 {
438 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
439 reg = <0x20064000 0x100>;
440 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
443 clock-frequency = <24000000>;
444 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
445 clock-names = "baudclk", "apb_pclk";
446 pinctrl-names = "default";
447 pinctrl-0 = <&uart1_xfer>;
451 uart2: serial@20068000 {
452 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
453 reg = <0x20068000 0x100>;
454 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
457 clock-frequency = <24000000>;
458 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
459 clock-names = "baudclk", "apb_pclk";
460 pinctrl-names = "default";
461 pinctrl-0 = <&uart2_xfer>;
466 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
467 reg = <0x20072000 0x1000>;
468 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
469 #address-cells = <1>;
472 clocks = <&cru PCLK_I2C0>;
473 pinctrl-names = "default";
474 pinctrl-0 = <&i2c0_xfer>;
479 compatible = "rockchip,rockchip-spi";
480 reg = <0x20074000 0x1000>;
481 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
482 clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
483 clock-names = "apb-pclk","spi_pclk";
484 dmas = <&pdma 8>, <&pdma 9>;
485 dma-names = "tx", "rx";
486 pinctrl-names = "default";
487 pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
488 #address-cells = <1>;
493 pdma: pdma@20078000 {
494 compatible = "arm,pl330", "arm,primecell";
495 reg = <0x20078000 0x4000>;
496 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
497 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
499 arm,pl330-broken-no-flushp;
500 arm,pl330-periph-burst;
501 clocks = <&cru ACLK_DMAC2>;
502 clock-names = "apb_pclk";
506 compatible = "rockchip,rk3036-pinctrl";
507 rockchip,grf = <&grf>;
508 #address-cells = <1>;
512 gpio0: gpio0@2007c000 {
513 compatible = "rockchip,gpio-bank";
514 reg = <0x2007c000 0x100>;
515 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
516 clocks = <&cru PCLK_GPIO0>;
521 interrupt-controller;
522 #interrupt-cells = <2>;
525 gpio1: gpio1@20080000 {
526 compatible = "rockchip,gpio-bank";
527 reg = <0x20080000 0x100>;
528 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
529 clocks = <&cru PCLK_GPIO1>;
534 interrupt-controller;
535 #interrupt-cells = <2>;
538 gpio2: gpio2@20084000 {
539 compatible = "rockchip,gpio-bank";
540 reg = <0x20084000 0x100>;
541 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
542 clocks = <&cru PCLK_GPIO2>;
547 interrupt-controller;
548 #interrupt-cells = <2>;
551 pcfg_pull_default: pcfg_pull_default {
552 bias-pull-pin-default;
555 pcfg_pull_none: pcfg-pull-none {
561 rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
567 rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
573 rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
579 rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
584 sdmmc_clk: sdmmc-clk {
585 rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
588 sdmmc_cmd: sdmmc-cmd {
589 rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
593 rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
596 sdmmc_bus1: sdmmc-bus1 {
597 rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>;
600 sdmmc_bus4: sdmmc-bus4 {
601 rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
602 <1 RK_PC3 1 &pcfg_pull_default>,
603 <1 RK_PC4 1 &pcfg_pull_default>,
604 <1 RK_PC5 1 &pcfg_pull_default>;
609 sdio_bus1: sdio-bus1 {
610 rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>;
613 sdio_bus4: sdio-bus4 {
614 rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>,
615 <0 RK_PB4 1 &pcfg_pull_default>,
616 <0 RK_PB5 1 &pcfg_pull_default>,
617 <0 RK_PB6 1 &pcfg_pull_default>;
621 rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>;
625 rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>;
631 * We run eMMC at max speed; bump up drive strength.
632 * We also have external pulls, so disable the internal ones.
635 rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
639 rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>;
642 emmc_bus8: emmc-bus8 {
643 rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
644 <1 RK_PD1 2 &pcfg_pull_default>,
645 <1 RK_PD2 2 &pcfg_pull_default>,
646 <1 RK_PD3 2 &pcfg_pull_default>,
647 <1 RK_PD4 2 &pcfg_pull_default>,
648 <1 RK_PD5 2 &pcfg_pull_default>,
649 <1 RK_PD6 2 &pcfg_pull_default>,
650 <1 RK_PD7 2 &pcfg_pull_default>;
655 flash_ale: flash-ale {
656 rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>;
659 flash_bus8: flash-bus8 {
660 rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>,
661 <1 RK_PD1 1 &pcfg_pull_default>,
662 <1 RK_PD2 1 &pcfg_pull_default>,
663 <1 RK_PD3 1 &pcfg_pull_default>,
664 <1 RK_PD4 1 &pcfg_pull_default>,
665 <1 RK_PD5 1 &pcfg_pull_default>,
666 <1 RK_PD6 1 &pcfg_pull_default>,
667 <1 RK_PD7 1 &pcfg_pull_default>;
670 flash_cle: flash-cle {
671 rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>;
674 flash_csn0: flash-csn0 {
675 rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>;
678 flash_rdn: flash-rdn {
679 rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>;
682 flash_rdy: flash-rdy {
683 rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>;
686 flash_wrn: flash-wrn {
687 rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>;
692 emac_xfer: emac-xfer {
693 rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
694 <2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */
695 <2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */
696 <2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */
697 <2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */
698 <2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */
699 <2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */
700 <2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */
703 emac_mdio: emac-mdio {
704 rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */
705 <2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */
710 i2c0_xfer: i2c0-xfer {
711 rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
712 <0 RK_PA1 1 &pcfg_pull_none>;
717 i2c1_xfer: i2c1-xfer {
718 rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
719 <0 RK_PA3 1 &pcfg_pull_none>;
724 i2c2_xfer: i2c2-xfer {
725 rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
726 <2 RK_PC5 1 &pcfg_pull_none>;
732 rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
733 <1 RK_PA1 1 &pcfg_pull_default>,
734 <1 RK_PA2 1 &pcfg_pull_default>,
735 <1 RK_PA3 1 &pcfg_pull_default>,
736 <1 RK_PA4 1 &pcfg_pull_default>,
737 <1 RK_PA5 1 &pcfg_pull_default>;
743 rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
744 <1 RK_PB1 1 &pcfg_pull_none>,
745 <1 RK_PB2 1 &pcfg_pull_none>,
746 <1 RK_PB3 1 &pcfg_pull_none>;
751 uart0_xfer: uart0-xfer {
752 rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
753 <0 RK_PC1 1 &pcfg_pull_none>;
756 uart0_cts: uart0-cts {
757 rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>;
760 uart0_rts: uart0-rts {
761 rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
766 uart1_xfer: uart1-xfer {
767 rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>,
768 <2 RK_PC7 1 &pcfg_pull_none>;
770 /* no rts / cts for uart1 */
774 uart2_xfer: uart2-xfer {
775 rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
776 <1 RK_PC3 2 &pcfg_pull_none>;
778 /* no rts / cts for uart2 */
783 rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
787 rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
791 rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
795 rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
800 rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;