arch/arm/boot/dts/r8a7793-gose.dts

   1 /*
   2  * Device Tree Source for the Gose board
   3  *
   4  * Copyright (C) 2014-2015 Renesas Electronics Corporation
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 /*
  12  * SSI-AK4643
  13  *
  14  * SW1: 1: AK4643
  15  *      2: CN22
  16  *      3: ADV7511
  17  *
  18  * This command is required when Playback/Capture
  19  *
  20  *      amixer set "LINEOUT Mixer DACL" on
  21  *      amixer set "DVC Out" 100%
  22  *      amixer set "DVC In" 100%
  23  *
  24  * You can use Mute
  25  *
  26  *      amixer set "DVC Out Mute" on
  27  *      amixer set "DVC In Mute" on
  28  *
  29  * You can use Volume Ramp
  30  *
  31  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  32  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  33  *      amixer set "DVC Out Ramp" on
  34  *      aplay xxx.wav &
  35  *      amixer set "DVC Out"  80%  // Volume Down
  36  *      amixer set "DVC Out" 100%  // Volume Up
  37  */
  38
  39 /dts-v1/;
  40 #include "r8a7793.dtsi"
  41 #include <dt-bindings/gpio/gpio.h>
  42 #include <dt-bindings/input/input.h>
  43
  44 / {
  45         model = "Gose";
  46         compatible = "renesas,gose", "renesas,r8a7793";
  47
  48         aliases {
  49                 serial0 = &scif0;
  50                 serial1 = &scif1;
  51                 i2c9 = &gpioi2c2;
  52                 i2c10 = &gpioi2c4;
  53                 i2c11 = &i2chdmi;
  54                 i2c12 = &i2cexio4;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         gpio-keys {
  68                 compatible = "gpio-keys";
  69
  70                 key-1 {
  71                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_1>;
  73                         label = "SW2-1";
  74                         wakeup-source;
  75                         debounce-interval = <20>;
  76                 };
  77                 key-2 {
  78                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_2>;
  80                         label = "SW2-2";
  81                         wakeup-source;
  82                         debounce-interval = <20>;
  83                 };
  84                 key-3 {
  85                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_3>;
  87                         label = "SW2-3";
  88                         wakeup-source;
  89                         debounce-interval = <20>;
  90                 };
  91                 key-4 {
  92                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_4>;
  94                         label = "SW2-4";
  95                         wakeup-source;
  96                         debounce-interval = <20>;
  97                 };
  98                 key-a {
  99                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_A>;
 101                         label = "SW30";
 102                         wakeup-source;
 103                         debounce-interval = <20>;
 104                 };
 105                 key-b {
 106                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 107                         linux,code = <KEY_B>;
 108                         label = "SW31";
 109                         wakeup-source;
 110                         debounce-interval = <20>;
 111                 };
 112                 key-c {
 113                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_C>;
 115                         label = "SW32";
 116                         wakeup-source;
 117                         debounce-interval = <20>;
 118                 };
 119                 key-d {
 120                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_D>;
 122                         label = "SW33";
 123                         wakeup-source;
 124                         debounce-interval = <20>;
 125                 };
 126                 key-e {
 127                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_E>;
 129                         label = "SW34";
 130                         wakeup-source;
 131                         debounce-interval = <20>;
 132                 };
 133                 key-f {
 134                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_F>;
 136                         label = "SW35";
 137                         wakeup-source;
 138                         debounce-interval = <20>;
 139                 };
 140                 key-g {
 141                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_G>;
 143                         label = "SW36";
 144                         wakeup-source;
 145                         debounce-interval = <20>;
 146                 };
 147         };
 148
 149         leds {
 150                 compatible = "gpio-leds";
 151                 led6 {
 152                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 153                         label = "LED6";
 154                 };
 155                 led7 {
 156                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 157                         label = "LED7";
 158                 };
 159                 led8 {
 160                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 161                         label = "LED8";
 162                 };
 163         };
 164
 165         vcc_sdhi0: regulator-vcc-sdhi0 {
 166                 compatible = "regulator-fixed";
 167
 168                 regulator-name = "SDHI0 Vcc";
 169                 regulator-min-microvolt = <3300000>;
 170                 regulator-max-microvolt = <3300000>;
 171
 172                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174         };
 175
 176         vccq_sdhi0: regulator-vccq-sdhi0 {
 177                 compatible = "regulator-gpio";
 178
 179                 regulator-name = "SDHI0 VccQ";
 180                 regulator-min-microvolt = <1800000>;
 181                 regulator-max-microvolt = <3300000>;
 182
 183                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 184                 gpios-states = <1>;
 185                 states = <3300000 1
 186                           1800000 0>;
 187         };
 188
 189         vcc_sdhi1: regulator-vcc-sdhi1 {
 190                 compatible = "regulator-fixed";
 191
 192                 regulator-name = "SDHI1 Vcc";
 193                 regulator-min-microvolt = <3300000>;
 194                 regulator-max-microvolt = <3300000>;
 195
 196                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 197                 enable-active-high;
 198         };
 199
 200         vccq_sdhi1: regulator-vccq-sdhi1 {
 201                 compatible = "regulator-gpio";
 202
 203                 regulator-name = "SDHI1 VccQ";
 204                 regulator-min-microvolt = <1800000>;
 205                 regulator-max-microvolt = <3300000>;
 206
 207                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 208                 gpios-states = <1>;
 209                 states = <3300000 1
 210                           1800000 0>;
 211         };
 212
 213         vcc_sdhi2: regulator-vcc-sdhi2 {
 214                 compatible = "regulator-fixed";
 215
 216                 regulator-name = "SDHI2 Vcc";
 217                 regulator-min-microvolt = <3300000>;
 218                 regulator-max-microvolt = <3300000>;
 219
 220                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 221                 enable-active-high;
 222         };
 223
 224         vccq_sdhi2: regulator-vccq-sdhi2 {
 225                 compatible = "regulator-gpio";
 226
 227                 regulator-name = "SDHI2 VccQ";
 228                 regulator-min-microvolt = <1800000>;
 229                 regulator-max-microvolt = <3300000>;
 230
 231                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 232                 gpios-states = <1>;
 233                 states = <3300000 1
 234                           1800000 0>;
 235         };
 236
 237         audio_clock: audio_clock {
 238                 compatible = "fixed-clock";
 239                 #clock-cells = <0>;
 240                 clock-frequency = <11289600>;
 241         };
 242
 243         rsnd_ak4643: sound {
 244                 compatible = "simple-audio-card";
 245
 246                 simple-audio-card,format = "left_j";
 247                 simple-audio-card,bitclock-master = <&sndcodec>;
 248                 simple-audio-card,frame-master = <&sndcodec>;
 249
 250                 sndcpu: simple-audio-card,cpu {
 251                         sound-dai = <&rcar_sound>;
 252                 };
 253
 254                 sndcodec: simple-audio-card,codec {
 255                         sound-dai = <&ak4643>;
 256                         clocks = <&audio_clock>;
 257                 };
 258         };
 259
 260         hdmi-in {
 261                 compatible = "hdmi-connector";
 262                 type = "a";
 263
 264                 port {
 265                         hdmi_con_in: endpoint {
 266                                 remote-endpoint = <&adv7612_in>;
 267                         };
 268                 };
 269         };
 270
 271         hdmi-out {
 272                 compatible = "hdmi-connector";
 273                 type = "a";
 274
 275                 port {
 276                         hdmi_con_out: endpoint {
 277                                 remote-endpoint = <&adv7511_out>;
 278                         };
 279                 };
 280         };
 281
 282         composite-in {
 283                 compatible = "composite-video-connector";
 284
 285                 port {
 286                         composite_con_in: endpoint {
 287                                 remote-endpoint = <&adv7180_in>;
 288                         };
 289                 };
 290         };
 291
 292         x2_clk: x2-clock {
 293                 compatible = "fixed-clock";
 294                 #clock-cells = <0>;
 295                 clock-frequency = <74250000>;
 296         };
 297
 298         x13_clk: x13-clock {
 299                 compatible = "fixed-clock";
 300                 #clock-cells = <0>;
 301                 clock-frequency = <148500000>;
 302         };
 303
 304         gpioi2c2: i2c-9 {
 305                 #address-cells = <1>;
 306                 #size-cells = <0>;
 307                 compatible = "i2c-gpio";
 308                 status = "disabled";
 309                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 310                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 311                 i2c-gpio,delay-us = <5>;
 312         };
 313
 314         gpioi2c4: i2c-10 {
 315                 #address-cells = <1>;
 316                 #size-cells = <0>;
 317                 compatible = "i2c-gpio";
 318                 status = "disabled";
 319                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 320                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 321                 i2c-gpio,delay-us = <5>;
 322         };
 323
 324         /*
 325          * A fallback to GPIO is provided for I2C2.
 326          */
 327         i2chdmi: i2c-11 {
 328                 compatible = "i2c-demux-pinctrl";
 329                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 330                 i2c-bus-name = "i2c-hdmi";
 331                 #address-cells = <1>;
 332                 #size-cells = <0>;
 333
 334                 ak4643: codec@12 {
 335                         compatible = "asahi-kasei,ak4643";
 336                         #sound-dai-cells = <0>;
 337                         reg = <0x12>;
 338                 };
 339
 340                 composite-in@20 {
 341                         compatible = "adi,adv7180cp";
 342                         reg = <0x20>;
 343                         remote = <&vin1>;
 344
 345                         port {
 346                                 #address-cells = <1>;
 347                                 #size-cells = <0>;
 348
 349                                 port@0 {
 350                                         reg = <0>;
 351                                         adv7180_in: endpoint {
 352                                                 remote-endpoint = <&composite_con_in>;
 353                                         };
 354                                 };
 355
 356                                 port@3 {
 357                                         reg = <3>;
 358                                         adv7180_out: endpoint {
 359                                                 bus-width = <8>;
 360                                                 remote-endpoint = <&vin1ep>;
 361                                         };
 362                                 };
 363                         };
 364                 };
 365
 366                 hdmi@39 {
 367                         compatible = "adi,adv7511w";
 368                         reg = <0x39>;
 369                         interrupt-parent = <&gpio3>;
 370                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 371
 372                         adi,input-depth = <8>;
 373                         adi,input-colorspace = "rgb";
 374                         adi,input-clock = "1x";
 375                         adi,input-style = <1>;
 376                         adi,input-justification = "evenly";
 377
 378                         ports {
 379                                 #address-cells = <1>;
 380                                 #size-cells = <0>;
 381
 382                                 port@0 {
 383                                         reg = <0>;
 384                                         adv7511_in: endpoint {
 385                                                 remote-endpoint = <&du_out_rgb>;
 386                                         };
 387                                 };
 388
 389                                 port@1 {
 390                                         reg = <1>;
 391                                         adv7511_out: endpoint {
 392                                                 remote-endpoint = <&hdmi_con_out>;
 393                                         };
 394                                 };
 395                         };
 396                 };
 397
 398                 hdmi-in@4c {
 399                         compatible = "adi,adv7612";
 400                         reg = <0x4c>;
 401                         interrupt-parent = <&gpio4>;
 402                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 403                         default-input = <0>;
 404
 405                         port {
 406                                 #address-cells = <1>;
 407                                 #size-cells = <0>;
 408
 409                                 port@0 {
 410                                         reg = <0>;
 411                                         adv7612_in: endpoint {
 412                                                 remote-endpoint = <&hdmi_con_in>;
 413                                         };
 414                                 };
 415
 416                                 port@2 {
 417                                         reg = <2>;
 418                                         adv7612_out: endpoint {
 419                                                 remote-endpoint = <&vin0ep2>;
 420                                         };
 421                                 };
 422                         };
 423                 };
 424
 425                 eeprom@50 {
 426                         compatible = "renesas,r1ex24002", "atmel,24c02";
 427                         reg = <0x50>;
 428                         pagesize = <16>;
 429                 };
 430         };
 431
 432         /*
 433          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 434          * A fallback to GPIO is provided.
 435          */
 436         i2cexio4: i2c-12 {
 437                 compatible = "i2c-demux-pinctrl";
 438                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 439                 i2c-bus-name = "i2c-exio4";
 440                 #address-cells = <1>;
 441                 #size-cells = <0>;
 442         };
 443 };
 444
 445 &du {
 446         pinctrl-0 = <&du_pins>;
 447         pinctrl-names = "default";
 448         status = "okay";
 449
 450         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
 451                  <&x13_clk>, <&x2_clk>;
 452         clock-names = "du.0", "du.1", "lvds.0",
 453                       "dclkin.0", "dclkin.1";
 454
 455         ports {
 456                 port@0 {
 457                         endpoint {
 458                                 remote-endpoint = <&adv7511_in>;
 459                         };
 460                 };
 461                 port@1 {
 462                         lvds_connector: endpoint {
 463                         };
 464                 };
 465         };
 466 };
 467
 468 &extal_clk {
 469         clock-frequency = <20000000>;
 470 };
 471
 472 &pfc {
 473         pinctrl-0 = <&scif_clk_pins>;
 474         pinctrl-names = "default";
 475
 476         i2c2_pins: i2c2 {
 477                 groups = "i2c2";
 478                 function = "i2c2";
 479         };
 480
 481         i2c4_pins: i2c4 {
 482                 groups = "i2c4_c";
 483                 function = "i2c4";
 484         };
 485
 486         du_pins: du {
 487                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 488                 function = "du";
 489         };
 490
 491         scif0_pins: scif0 {
 492                 groups = "scif0_data_d";
 493                 function = "scif0";
 494         };
 495
 496         scif1_pins: scif1 {
 497                 groups = "scif1_data_d";
 498                 function = "scif1";
 499         };
 500
 501         scif_clk_pins: scif_clk {
 502                 groups = "scif_clk";
 503                 function = "scif_clk";
 504         };
 505
 506         ether_pins: ether {
 507                 groups = "eth_link", "eth_mdio", "eth_rmii";
 508                 function = "eth";
 509         };
 510
 511         phy1_pins: phy1 {
 512                 groups = "intc_irq0";
 513                 function = "intc";
 514         };
 515
 516         sdhi0_pins: sd0 {
 517                 groups = "sdhi0_data4", "sdhi0_ctrl";
 518                 function = "sdhi0";
 519                 power-source = <3300>;
 520         };
 521
 522         sdhi0_pins_uhs: sd0_uhs {
 523                 groups = "sdhi0_data4", "sdhi0_ctrl";
 524                 function = "sdhi0";
 525                 power-source = <1800>;
 526         };
 527
 528         sdhi1_pins: sd1 {
 529                 groups = "sdhi1_data4", "sdhi1_ctrl";
 530                 function = "sdhi1";
 531                 power-source = <3300>;
 532         };
 533
 534         sdhi1_pins_uhs: sd1_uhs {
 535                 groups = "sdhi1_data4", "sdhi1_ctrl";
 536                 function = "sdhi1";
 537                 power-source = <1800>;
 538         };
 539
 540         sdhi2_pins: sd2 {
 541                 groups = "sdhi2_data4", "sdhi2_ctrl";
 542                 function = "sdhi2";
 543                 power-source = <3300>;
 544         };
 545
 546         sdhi2_pins_uhs: sd2_uhs {
 547                 groups = "sdhi2_data4", "sdhi2_ctrl";
 548                 function = "sdhi2";
 549                 power-source = <1800>;
 550         };
 551
 552         qspi_pins: qspi {
 553                 groups = "qspi_ctrl", "qspi_data4";
 554                 function = "qspi";
 555         };
 556
 557         sound_pins: sound {
 558                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 559                 function = "ssi";
 560         };
 561
 562         sound_clk_pins: sound_clk {
 563                 groups = "audio_clk_a";
 564                 function = "audio_clk";
 565         };
 566
 567         vin0_pins: vin0 {
 568                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 569                 function = "vin0";
 570         };
 571
 572         vin1_pins: vin1 {
 573                 groups = "vin1_data8", "vin1_clk";
 574                 function = "vin1";
 575         };
 576 };
 577
 578 &ether {
 579         pinctrl-0 = <&ether_pins &phy1_pins>;
 580         pinctrl-names = "default";
 581
 582         phy-handle = <&phy1>;
 583         renesas,ether-link-active-low;
 584         status = "okay";
 585
 586         phy1: ethernet-phy@1 {
 587                 reg = <1>;
 588                 interrupt-parent = <&irqc0>;
 589                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 590                 micrel,led-mode = <1>;
 591         };
 592 };
 593
 594 &cmt0 {
 595         status = "okay";
 596 };
 597
 598 &scif0 {
 599         pinctrl-0 = <&scif0_pins>;
 600         pinctrl-names = "default";
 601
 602         status = "okay";
 603 };
 604
 605 &scif1 {
 606         pinctrl-0 = <&scif1_pins>;
 607         pinctrl-names = "default";
 608
 609         status = "okay";
 610 };
 611
 612 &scif_clk {
 613         clock-frequency = <14745600>;
 614 };
 615
 616 &sdhi0 {
 617         pinctrl-0 = <&sdhi0_pins>;
 618         pinctrl-1 = <&sdhi0_pins_uhs>;
 619         pinctrl-names = "default", "state_uhs";
 620
 621         vmmc-supply = <&vcc_sdhi0>;
 622         vqmmc-supply = <&vccq_sdhi0>;
 623         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 624         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 625         sd-uhs-sdr50;
 626         sd-uhs-sdr104;
 627         status = "okay";
 628 };
 629
 630 &sdhi1 {
 631         pinctrl-0 = <&sdhi1_pins>;
 632         pinctrl-1 = <&sdhi1_pins_uhs>;
 633         pinctrl-names = "default", "state_uhs";
 634
 635         vmmc-supply = <&vcc_sdhi1>;
 636         vqmmc-supply = <&vccq_sdhi1>;
 637         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 638         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 639         sd-uhs-sdr50;
 640         status = "okay";
 641 };
 642
 643 &sdhi2 {
 644         pinctrl-0 = <&sdhi2_pins>;
 645         pinctrl-1 = <&sdhi2_pins_uhs>;
 646         pinctrl-names = "default", "state_uhs";
 647
 648         vmmc-supply = <&vcc_sdhi2>;
 649         vqmmc-supply = <&vccq_sdhi2>;
 650         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 651         sd-uhs-sdr50;
 652         status = "okay";
 653 };
 654
 655 &qspi {
 656         pinctrl-0 = <&qspi_pins>;
 657         pinctrl-names = "default";
 658
 659         status = "okay";
 660
 661         flash@0 {
 662                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 663                 reg = <0>;
 664                 spi-max-frequency = <30000000>;
 665                 spi-tx-bus-width = <4>;
 666                 spi-rx-bus-width = <4>;
 667                 spi-cpol;
 668                 spi-cpha;
 669                 m25p,fast-read;
 670
 671                 partitions {
 672                         compatible = "fixed-partitions";
 673                         #address-cells = <1>;
 674                         #size-cells = <1>;
 675
 676                         partition@0 {
 677                                 label = "loader";
 678                                 reg = <0x00000000 0x00040000>;
 679                                 read-only;
 680                         };
 681                         partition@40000 {
 682                                 label = "user";
 683                                 reg = <0x00040000 0x00400000>;
 684                                 read-only;
 685                         };
 686                         partition@440000 {
 687                                 label = "flash";
 688                                 reg = <0x00440000 0x03bc0000>;
 689                         };
 690                 };
 691         };
 692 };
 693
 694 &i2c2 {
 695         pinctrl-0 = <&i2c2_pins>;
 696         pinctrl-names = "i2c-hdmi";
 697
 698         status = "okay";
 699         clock-frequency = <100000>;
 700
 701 };
 702
 703 &i2c6 {
 704         status = "okay";
 705         clock-frequency = <100000>;
 706
 707         pmic@58 {
 708                 compatible = "dlg,da9063";
 709                 reg = <0x58>;
 710                 interrupt-parent = <&irqc0>;
 711                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 712                 interrupt-controller;
 713
 714                 rtc {
 715                         compatible = "dlg,da9063-rtc";
 716                 };
 717
 718                 wdt {
 719                         compatible = "dlg,da9063-watchdog";
 720                 };
 721         };
 722 };
 723
 724 &i2c4 {
 725         pinctrl-0 = <&i2c4_pins>;
 726         pinctrl-names = "i2c-exio4";
 727 };
 728
 729 &rcar_sound {
 730         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 731         pinctrl-names = "default";
 732
 733         /* Single DAI */
 734         #sound-dai-cells = <0>;
 735
 736         status = "okay";
 737
 738         rcar_sound,dai {
 739                 dai0 {
 740                         playback = <&ssi0 &src2 &dvc0>;
 741                         capture  = <&ssi1 &src3 &dvc1>;
 742                 };
 743         };
 744 };
 745
 746 &ssi1 {
 747         shared-pin;
 748 };
 749
 750 /* HDMI video input */
 751 &vin0 {
 752         status = "okay";
 753         pinctrl-0 = <&vin0_pins>;
 754         pinctrl-names = "default";
 755
 756         port {
 757                 #address-cells = <1>;
 758                 #size-cells = <0>;
 759
 760                 vin0ep2: endpoint {
 761                         remote-endpoint = <&adv7612_out>;
 762                         bus-width = <24>;
 763                         hsync-active = <0>;
 764                         vsync-active = <0>;
 765                         pclk-sample = <1>;
 766                         data-active = <1>;
 767                 };
 768         };
 769 };
 770
 771 /* composite video input */
 772 &vin1 {
 773         pinctrl-0 = <&vin1_pins>;
 774         pinctrl-names = "default";
 775
 776         status = "okay";
 777
 778         port {
 779                 #address-cells = <1>;
 780                 #size-cells = <0>;
 781
 782                 vin1ep: endpoint {
 783                         remote-endpoint = <&adv7180_out>;
 784                         bus-width = <8>;
 785                 };
 786         };
 787 };