Merge tag 'gvt-next-fixes-2019-09-06' of https://github.com/intel/gvt-linux into...
[linux-2.6-microblaze.git] / arch / arm / boot / dts / r8a7791-koelsch.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Device Tree Source for the Koelsch board
4  *
5  * Copyright (C) 2013 Renesas Electronics Corporation
6  * Copyright (C) 2013-2014 Renesas Solutions Corp.
7  * Copyright (C) 2014 Cogent Embedded, Inc.
8  */
9
10 /*
11  * SSI-AK4643
12  *
13  * SW1: 1: AK4643
14  *      2: CN22
15  *      3: ADV7511
16  *
17  * This command is required when Playback/Capture
18  *
19  *      amixer set "LINEOUT Mixer DACL" on
20  *      amixer set "DVC Out" 100%
21  *      amixer set "DVC In" 100%
22  *
23  * You can use Mute
24  *
25  *      amixer set "DVC Out Mute" on
26  *      amixer set "DVC In Mute" on
27  *
28  * You can use Volume Ramp
29  *
30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32  *      amixer set "DVC Out Ramp" on
33  *      aplay xxx.wav &
34  *      amixer set "DVC Out"  80%  // Volume Down
35  *      amixer set "DVC Out" 100%  // Volume Up
36  */
37
38 /dts-v1/;
39 #include "r8a7791.dtsi"
40 #include <dt-bindings/gpio/gpio.h>
41 #include <dt-bindings/input/input.h>
42
43 / {
44         model = "Koelsch";
45         compatible = "renesas,koelsch", "renesas,r8a7791";
46
47         aliases {
48                 serial0 = &scif0;
49                 serial1 = &scif1;
50                 i2c9 = &gpioi2c1;
51                 i2c10 = &gpioi2c2;
52                 i2c11 = &gpioi2c4;
53                 i2c12 = &i2cexio1;
54                 i2c13 = &i2chdmi;
55                 i2c14 = &i2cexio4;
56         };
57
58         chosen {
59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
60                 stdout-path = "serial0:115200n8";
61         };
62
63         memory@40000000 {
64                 device_type = "memory";
65                 reg = <0 0x40000000 0 0x40000000>;
66         };
67
68         memory@200000000 {
69                 device_type = "memory";
70                 reg = <2 0x00000000 0 0x40000000>;
71         };
72
73         lbsc {
74                 #address-cells = <1>;
75                 #size-cells = <1>;
76         };
77
78         keyboard {
79                 compatible = "gpio-keys";
80
81                 key-1 {
82                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
83                         linux,code = <KEY_1>;
84                         label = "SW2-1";
85                         wakeup-source;
86                         debounce-interval = <20>;
87                 };
88                 key-2 {
89                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
90                         linux,code = <KEY_2>;
91                         label = "SW2-2";
92                         wakeup-source;
93                         debounce-interval = <20>;
94                 };
95                 key-3 {
96                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
97                         linux,code = <KEY_3>;
98                         label = "SW2-3";
99                         wakeup-source;
100                         debounce-interval = <20>;
101                 };
102                 key-4 {
103                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
104                         linux,code = <KEY_4>;
105                         label = "SW2-4";
106                         wakeup-source;
107                         debounce-interval = <20>;
108                 };
109                 key-a {
110                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
111                         linux,code = <KEY_A>;
112                         label = "SW30";
113                         wakeup-source;
114                         debounce-interval = <20>;
115                 };
116                 key-b {
117                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
118                         linux,code = <KEY_B>;
119                         label = "SW31";
120                         wakeup-source;
121                         debounce-interval = <20>;
122                 };
123                 key-c {
124                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
125                         linux,code = <KEY_C>;
126                         label = "SW32";
127                         wakeup-source;
128                         debounce-interval = <20>;
129                 };
130                 key-d {
131                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
132                         linux,code = <KEY_D>;
133                         label = "SW33";
134                         wakeup-source;
135                         debounce-interval = <20>;
136                 };
137                 key-e {
138                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
139                         linux,code = <KEY_E>;
140                         label = "SW34";
141                         wakeup-source;
142                         debounce-interval = <20>;
143                 };
144                 key-f {
145                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
146                         linux,code = <KEY_F>;
147                         label = "SW35";
148                         wakeup-source;
149                         debounce-interval = <20>;
150                 };
151                 key-g {
152                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
153                         linux,code = <KEY_G>;
154                         label = "SW36";
155                         wakeup-source;
156                         debounce-interval = <20>;
157                 };
158         };
159
160         leds {
161                 compatible = "gpio-leds";
162                 led6 {
163                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
164                         label = "LED6";
165                 };
166                 led7 {
167                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
168                         label = "LED7";
169                 };
170                 led8 {
171                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
172                         label = "LED8";
173                 };
174         };
175
176         vcc_sdhi0: regulator-vcc-sdhi0 {
177                 compatible = "regulator-fixed";
178
179                 regulator-name = "SDHI0 Vcc";
180                 regulator-min-microvolt = <3300000>;
181                 regulator-max-microvolt = <3300000>;
182
183                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
184                 enable-active-high;
185         };
186
187         vccq_sdhi0: regulator-vccq-sdhi0 {
188                 compatible = "regulator-gpio";
189
190                 regulator-name = "SDHI0 VccQ";
191                 regulator-min-microvolt = <1800000>;
192                 regulator-max-microvolt = <3300000>;
193
194                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
195                 gpios-states = <1>;
196                 states = <3300000 1
197                           1800000 0>;
198         };
199
200         vcc_sdhi1: regulator-vcc-sdhi1 {
201                 compatible = "regulator-fixed";
202
203                 regulator-name = "SDHI1 Vcc";
204                 regulator-min-microvolt = <3300000>;
205                 regulator-max-microvolt = <3300000>;
206
207                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
208                 enable-active-high;
209         };
210
211         vccq_sdhi1: regulator-vccq-sdhi1 {
212                 compatible = "regulator-gpio";
213
214                 regulator-name = "SDHI1 VccQ";
215                 regulator-min-microvolt = <1800000>;
216                 regulator-max-microvolt = <3300000>;
217
218                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
219                 gpios-states = <1>;
220                 states = <3300000 1
221                           1800000 0>;
222         };
223
224         vcc_sdhi2: regulator-vcc-sdhi2 {
225                 compatible = "regulator-fixed";
226
227                 regulator-name = "SDHI2 Vcc";
228                 regulator-min-microvolt = <3300000>;
229                 regulator-max-microvolt = <3300000>;
230
231                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
232                 enable-active-high;
233         };
234
235         vccq_sdhi2: regulator-vccq-sdhi2 {
236                 compatible = "regulator-gpio";
237
238                 regulator-name = "SDHI2 VccQ";
239                 regulator-min-microvolt = <1800000>;
240                 regulator-max-microvolt = <3300000>;
241
242                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
243                 gpios-states = <1>;
244                 states = <3300000 1
245                           1800000 0>;
246         };
247
248         audio_clock: audio_clock {
249                 compatible = "fixed-clock";
250                 #clock-cells = <0>;
251                 clock-frequency = <11289600>;
252         };
253
254         rsnd_ak4643: sound {
255                 compatible = "simple-audio-card";
256
257                 simple-audio-card,format = "left_j";
258                 simple-audio-card,bitclock-master = <&sndcodec>;
259                 simple-audio-card,frame-master = <&sndcodec>;
260
261                 sndcpu: simple-audio-card,cpu {
262                         sound-dai = <&rcar_sound>;
263                 };
264
265                 sndcodec: simple-audio-card,codec {
266                         sound-dai = <&ak4643>;
267                         clocks = <&audio_clock>;
268                 };
269         };
270
271         hdmi-in {
272                 compatible = "hdmi-connector";
273                 type = "a";
274
275                 port {
276                         hdmi_con_in: endpoint {
277                                 remote-endpoint = <&adv7612_in>;
278                         };
279                 };
280         };
281
282         cec_clock: cec-clock {
283                 compatible = "fixed-clock";
284                 #clock-cells = <0>;
285                 clock-frequency = <12000000>;
286         };
287
288         hdmi-out {
289                 compatible = "hdmi-connector";
290                 type = "a";
291
292                 port {
293                         hdmi_con_out: endpoint {
294                                 remote-endpoint = <&adv7511_out>;
295                         };
296                 };
297         };
298
299         x2_clk: x2-clock {
300                 compatible = "fixed-clock";
301                 #clock-cells = <0>;
302                 clock-frequency = <74250000>;
303         };
304
305         x13_clk: x13-clock {
306                 compatible = "fixed-clock";
307                 #clock-cells = <0>;
308                 clock-frequency = <148500000>;
309         };
310
311         gpioi2c1: i2c-9 {
312                 #address-cells = <1>;
313                 #size-cells = <0>;
314                 compatible = "i2c-gpio";
315                 status = "disabled";
316                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
317                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
318                 i2c-gpio,delay-us = <5>;
319         };
320
321         gpioi2c2: i2c-10 {
322                 #address-cells = <1>;
323                 #size-cells = <0>;
324                 compatible = "i2c-gpio";
325                 status = "disabled";
326                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
327                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
328                 i2c-gpio,delay-us = <5>;
329         };
330
331         gpioi2c4: i2c-11 {
332                 #address-cells = <1>;
333                 #size-cells = <0>;
334                 compatible = "i2c-gpio";
335                 status = "disabled";
336                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
337                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
338                 i2c-gpio,delay-us = <5>;
339         };
340
341         /*
342          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
343          * A fallback to GPIO is provided.
344          */
345         i2cexio1: i2c-12 {
346                 compatible = "i2c-demux-pinctrl";
347                 i2c-parent = <&i2c1>, <&gpioi2c1>;
348                 i2c-bus-name = "i2c-exio1";
349                 #address-cells = <1>;
350                 #size-cells = <0>;
351         };
352
353         /*
354          * A fallback to GPIO is provided for I2C2.
355          */
356         i2chdmi: i2c-13 {
357                 compatible = "i2c-demux-pinctrl";
358                 i2c-parent = <&i2c2>, <&gpioi2c2>;
359                 i2c-bus-name = "i2c-hdmi";
360                 #address-cells = <1>;
361                 #size-cells = <0>;
362
363                 ak4643: codec@12 {
364                         compatible = "asahi-kasei,ak4643";
365                         #sound-dai-cells = <0>;
366                         reg = <0x12>;
367                 };
368
369                 composite-in@20 {
370                         compatible = "adi,adv7180";
371                         reg = <0x20>;
372                         remote = <&vin1>;
373
374                         port {
375                                 adv7180: endpoint {
376                                         bus-width = <8>;
377                                         remote-endpoint = <&vin1ep>;
378                                 };
379                         };
380                 };
381
382                 hdmi@39 {
383                         compatible = "adi,adv7511w";
384                         reg = <0x39>;
385                         interrupt-parent = <&gpio3>;
386                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
387                         clocks = <&cec_clock>;
388                         clock-names = "cec";
389
390                         adi,input-depth = <8>;
391                         adi,input-colorspace = "rgb";
392                         adi,input-clock = "1x";
393                         adi,input-style = <1>;
394                         adi,input-justification = "evenly";
395
396                         ports {
397                                 #address-cells = <1>;
398                                 #size-cells = <0>;
399
400                                 port@0 {
401                                         reg = <0>;
402                                         adv7511_in: endpoint {
403                                                 remote-endpoint = <&du_out_rgb>;
404                                         };
405                                 };
406
407                                 port@1 {
408                                         reg = <1>;
409                                         adv7511_out: endpoint {
410                                                 remote-endpoint = <&hdmi_con_out>;
411                                         };
412                                 };
413                         };
414                 };
415
416                 hdmi-in@4c {
417                         compatible = "adi,adv7612";
418                         reg = <0x4c>;
419                         interrupt-parent = <&gpio4>;
420                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
421                         default-input = <0>;
422
423                         ports {
424                                 #address-cells = <1>;
425                                 #size-cells = <0>;
426
427                                 port@0 {
428                                         reg = <0>;
429                                         adv7612_in: endpoint {
430                                                 remote-endpoint = <&hdmi_con_in>;
431                                         };
432                                 };
433
434                                 port@2 {
435                                         reg = <2>;
436                                         adv7612_out: endpoint {
437                                                 remote-endpoint = <&vin0ep2>;
438                                         };
439                                 };
440                         };
441                 };
442
443                 eeprom@50 {
444                         compatible = "renesas,r1ex24002", "atmel,24c02";
445                         reg = <0x50>;
446                         pagesize = <16>;
447                 };
448         };
449
450         /*
451          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
452          * A fallback to GPIO is provided.
453          */
454         i2cexio4: i2c-14 {
455                 compatible = "i2c-demux-pinctrl";
456                 i2c-parent = <&i2c4>, <&gpioi2c4>;
457                 i2c-bus-name = "i2c-exio4";
458                 #address-cells = <1>;
459                 #size-cells = <0>;
460         };
461 };
462
463 &du {
464         pinctrl-0 = <&du_pins>;
465         pinctrl-names = "default";
466         status = "okay";
467
468         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
469                  <&x13_clk>, <&x2_clk>;
470         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
471
472         ports {
473                 port@0 {
474                         endpoint {
475                                 remote-endpoint = <&adv7511_in>;
476                         };
477                 };
478         };
479 };
480
481 &lvds0 {
482         ports {
483                 port@1 {
484                         lvds_connector: endpoint {
485                         };
486                 };
487         };
488 };
489
490 &extal_clk {
491         clock-frequency = <20000000>;
492 };
493
494 &pfc {
495         pinctrl-0 = <&scif_clk_pins>;
496         pinctrl-names = "default";
497
498         i2c1_pins: i2c1 {
499                 groups = "i2c1";
500                 function = "i2c1";
501         };
502
503         i2c2_pins: i2c2 {
504                 groups = "i2c2";
505                 function = "i2c2";
506         };
507
508         i2c4_pins: i2c4 {
509                 groups = "i2c4_c";
510                 function = "i2c4";
511         };
512
513         du_pins: du {
514                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
515                 function = "du";
516         };
517
518         scif0_pins: scif0 {
519                 groups = "scif0_data_d";
520                 function = "scif0";
521         };
522
523         scif1_pins: scif1 {
524                 groups = "scif1_data_d";
525                 function = "scif1";
526         };
527
528         scif_clk_pins: scif_clk {
529                 groups = "scif_clk";
530                 function = "scif_clk";
531         };
532
533         ether_pins: ether {
534                 groups = "eth_link", "eth_mdio", "eth_rmii";
535                 function = "eth";
536         };
537
538         phy1_pins: phy1 {
539                 groups = "intc_irq0";
540                 function = "intc";
541         };
542
543         pmic_irq_pins: pmicirq {
544                 groups = "intc_irq2";
545                 function = "intc";
546         };
547
548         sdhi0_pins: sd0 {
549                 groups = "sdhi0_data4", "sdhi0_ctrl";
550                 function = "sdhi0";
551                 power-source = <3300>;
552         };
553
554         sdhi0_pins_uhs: sd0_uhs {
555                 groups = "sdhi0_data4", "sdhi0_ctrl";
556                 function = "sdhi0";
557                 power-source = <1800>;
558         };
559
560         sdhi1_pins: sd1 {
561                 groups = "sdhi1_data4", "sdhi1_ctrl";
562                 function = "sdhi1";
563                 power-source = <3300>;
564         };
565
566         sdhi1_pins_uhs: sd1_uhs {
567                 groups = "sdhi1_data4", "sdhi1_ctrl";
568                 function = "sdhi1";
569                 power-source = <1800>;
570         };
571
572         sdhi2_pins: sd2 {
573                 groups = "sdhi2_data4", "sdhi2_ctrl";
574                 function = "sdhi2";
575                 power-source = <3300>;
576         };
577
578         sdhi2_pins_uhs: sd2_uhs {
579                 groups = "sdhi2_data4", "sdhi2_ctrl";
580                 function = "sdhi2";
581                 power-source = <1800>;
582         };
583
584         qspi_pins: qspi {
585                 groups = "qspi_ctrl", "qspi_data4";
586                 function = "qspi";
587         };
588
589         msiof0_pins: msiof0 {
590                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
591                                  "msiof0_tx";
592                 function = "msiof0";
593         };
594
595         usb0_pins: usb0 {
596                 groups = "usb0";
597                 function = "usb0";
598         };
599
600         usb1_pins: usb1 {
601                 groups = "usb1";
602                 function = "usb1";
603         };
604
605         vin0_pins: vin0 {
606                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
607                 function = "vin0";
608         };
609
610         vin1_pins: vin1 {
611                 groups = "vin1_data8", "vin1_clk";
612                 function = "vin1";
613         };
614
615         sound_pins: sound {
616                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
617                 function = "ssi";
618         };
619
620         sound_clk_pins: sound_clk {
621                 groups = "audio_clk_a";
622                 function = "audio_clk";
623         };
624 };
625
626 &ether {
627         pinctrl-0 = <&ether_pins &phy1_pins>;
628         pinctrl-names = "default";
629
630         phy-handle = <&phy1>;
631         renesas,ether-link-active-low;
632         status = "okay";
633
634         phy1: ethernet-phy@1 {
635                 reg = <1>;
636                 interrupt-parent = <&irqc0>;
637                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
638                 micrel,led-mode = <1>;
639         };
640 };
641
642 &cmt0 {
643         status = "okay";
644 };
645
646 &rwdt {
647         timeout-sec = <60>;
648         status = "okay";
649 };
650
651 &sata0 {
652         status = "okay";
653 };
654
655 &scif0 {
656         pinctrl-0 = <&scif0_pins>;
657         pinctrl-names = "default";
658
659         status = "okay";
660 };
661
662 &scif1 {
663         pinctrl-0 = <&scif1_pins>;
664         pinctrl-names = "default";
665
666         status = "okay";
667 };
668
669 &scif_clk {
670         clock-frequency = <14745600>;
671 };
672
673 &sdhi0 {
674         pinctrl-0 = <&sdhi0_pins>;
675         pinctrl-1 = <&sdhi0_pins_uhs>;
676         pinctrl-names = "default", "state_uhs";
677
678         vmmc-supply = <&vcc_sdhi0>;
679         vqmmc-supply = <&vccq_sdhi0>;
680         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
681         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
682         sd-uhs-sdr50;
683         sd-uhs-sdr104;
684         status = "okay";
685 };
686
687 &sdhi1 {
688         pinctrl-0 = <&sdhi1_pins>;
689         pinctrl-1 = <&sdhi1_pins_uhs>;
690         pinctrl-names = "default", "state_uhs";
691
692         vmmc-supply = <&vcc_sdhi1>;
693         vqmmc-supply = <&vccq_sdhi1>;
694         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
695         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
696         sd-uhs-sdr50;
697         status = "okay";
698 };
699
700 &sdhi2 {
701         pinctrl-0 = <&sdhi2_pins>;
702         pinctrl-1 = <&sdhi2_pins_uhs>;
703         pinctrl-names = "default", "state_uhs";
704
705         vmmc-supply = <&vcc_sdhi2>;
706         vqmmc-supply = <&vccq_sdhi2>;
707         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
708         sd-uhs-sdr50;
709         status = "okay";
710 };
711
712 &qspi {
713         pinctrl-0 = <&qspi_pins>;
714         pinctrl-names = "default";
715
716         status = "okay";
717
718         flash: flash@0 {
719                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
720                 reg = <0>;
721                 spi-max-frequency = <30000000>;
722                 spi-tx-bus-width = <4>;
723                 spi-rx-bus-width = <4>;
724                 spi-cpha;
725                 spi-cpol;
726                 m25p,fast-read;
727
728                 partitions {
729                         compatible = "fixed-partitions";
730                         #address-cells = <1>;
731                         #size-cells = <1>;
732
733                         partition@0 {
734                                 label = "loader";
735                                 reg = <0x00000000 0x00080000>;
736                                 read-only;
737                         };
738                         partition@80000 {
739                                 label = "user";
740                                 reg = <0x00080000 0x00580000>;
741                                 read-only;
742                         };
743                         partition@600000 {
744                                 label = "flash";
745                                 reg = <0x00600000 0x03a00000>;
746                         };
747                 };
748         };
749 };
750
751 &msiof0 {
752         pinctrl-0 = <&msiof0_pins>;
753         pinctrl-names = "default";
754
755         status = "okay";
756
757         pmic: pmic@0 {
758                 compatible = "renesas,r2a11302ft";
759                 reg = <0>;
760                 spi-max-frequency = <6000000>;
761                 spi-cpol;
762                 spi-cpha;
763         };
764 };
765
766 &i2c1 {
767         pinctrl-0 = <&i2c1_pins>;
768         pinctrl-names = "i2c-exio1";
769 };
770
771 &i2c2 {
772         pinctrl-0 = <&i2c2_pins>;
773         pinctrl-names = "i2c-hdmi";
774
775         clock-frequency = <100000>;
776 };
777
778 &i2c4 {
779         pinctrl-0 = <&i2c4_pins>;
780         pinctrl-names = "i2c-exio4";
781 };
782
783 &i2c6 {
784         pinctrl-names = "default";
785         pinctrl-0 = <&pmic_irq_pins>;
786         status = "okay";
787         clock-frequency = <100000>;
788
789         pmic@58 {
790                 compatible = "dlg,da9063";
791                 reg = <0x58>;
792                 interrupt-parent = <&irqc0>;
793                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
794                 interrupt-controller;
795
796                 rtc {
797                         compatible = "dlg,da9063-rtc";
798                 };
799
800                 wdt {
801                         compatible = "dlg,da9063-watchdog";
802                 };
803         };
804
805         vdd_dvfs: regulator@68 {
806                 compatible = "dlg,da9210";
807                 reg = <0x68>;
808                 interrupt-parent = <&irqc0>;
809                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
810
811                 regulator-min-microvolt = <1000000>;
812                 regulator-max-microvolt = <1000000>;
813                 regulator-boot-on;
814                 regulator-always-on;
815         };
816 };
817
818 &pci0 {
819         status = "okay";
820         pinctrl-0 = <&usb0_pins>;
821         pinctrl-names = "default";
822 };
823
824 &pci1 {
825         status = "okay";
826         pinctrl-0 = <&usb1_pins>;
827         pinctrl-names = "default";
828 };
829
830 &hsusb {
831         status = "okay";
832         pinctrl-0 = <&usb0_pins>;
833         pinctrl-names = "default";
834         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
835 };
836
837 &usbphy {
838         status = "okay";
839 };
840
841 &pcie_bus_clk {
842         clock-frequency = <100000000>;
843 };
844
845 &pciec {
846         status = "okay";
847 };
848
849 &cpu0 {
850         cpu0-supply = <&vdd_dvfs>;
851 };
852
853 /* HDMI video input */
854 &vin0 {
855         status = "okay";
856         pinctrl-0 = <&vin0_pins>;
857         pinctrl-names = "default";
858
859         port {
860                 vin0ep2: endpoint {
861                         remote-endpoint = <&adv7612_out>;
862                         bus-width = <24>;
863                         hsync-active = <0>;
864                         vsync-active = <0>;
865                         pclk-sample = <1>;
866                         data-active = <1>;
867                 };
868         };
869 };
870
871 /* composite video input */
872 &vin1 {
873         status = "okay";
874         pinctrl-0 = <&vin1_pins>;
875         pinctrl-names = "default";
876
877         port {
878                 vin1ep: endpoint {
879                         remote-endpoint = <&adv7180>;
880                         bus-width = <8>;
881                 };
882         };
883 };
884
885 &rcar_sound {
886         pinctrl-0 = <&sound_pins &sound_clk_pins>;
887         pinctrl-names = "default";
888
889         /* Single DAI */
890         #sound-dai-cells = <0>;
891
892         status = "okay";
893
894         rcar_sound,dai {
895                 dai0 {
896                         playback = <&ssi0 &src2 &dvc0>;
897                         capture  = <&ssi1 &src3 &dvc1>;
898                 };
899         };
900 };
901
902 &ssi1 {
903         shared-pin;
904 };