arch/arm/boot/dts/r8a7790-lager.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Lager board
   4  *
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  * Copyright (C) 2015-2016 Renesas Electronics Corporation
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7790.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Lager";
  45         compatible = "renesas,lager", "renesas,r8a7790";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scifa1;
  50                 i2c8 = &gpioi2c1;
  51                 i2c9 = &gpioi2c2;
  52                 i2c10 = &i2cexio0;
  53                 i2c11 = &i2cexio1;
  54                 i2c12 = &i2chdmi;
  55                 i2c13 = &i2cpwr;
  56         };
  57
  58         chosen {
  59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@40000000 {
  64                 device_type = "memory";
  65                 reg = <0 0x40000000 0 0x40000000>;
  66         };
  67
  68         memory@140000000 {
  69                 device_type = "memory";
  70                 reg = <1 0x40000000 0 0xc0000000>;
  71         };
  72
  73         lbsc {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76         };
  77
  78         keyboard {
  79                 compatible = "gpio-keys";
  80
  81                 one {
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  87                 };
  88                 two {
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
  94                 };
  95                 three {
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 101                 };
 102                 four {
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 108                 };
 109         };
 110
 111         leds {
 112                 compatible = "gpio-leds";
 113                 led6 {
 114                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 115                 };
 116                 led7 {
 117                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 118                 };
 119                 led8 {
 120                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 121                 };
 122         };
 123
 124         fixedregulator3v3: regulator-3v3 {
 125                 compatible = "regulator-fixed";
 126                 regulator-name = "fixed-3.3V";
 127                 regulator-min-microvolt = <3300000>;
 128                 regulator-max-microvolt = <3300000>;
 129                 regulator-boot-on;
 130                 regulator-always-on;
 131         };
 132
 133         vcc_sdhi0: regulator-vcc-sdhi0 {
 134                 compatible = "regulator-fixed";
 135
 136                 regulator-name = "SDHI0 Vcc";
 137                 regulator-min-microvolt = <3300000>;
 138                 regulator-max-microvolt = <3300000>;
 139
 140                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 141                 enable-active-high;
 142         };
 143
 144         vccq_sdhi0: regulator-vccq-sdhi0 {
 145                 compatible = "regulator-gpio";
 146
 147                 regulator-name = "SDHI0 VccQ";
 148                 regulator-min-microvolt = <1800000>;
 149                 regulator-max-microvolt = <3300000>;
 150
 151                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 152                 gpios-states = <1>;
 153                 states = <3300000 1>, <1800000 0>;
 154         };
 155
 156         vcc_sdhi2: regulator-vcc-sdhi2 {
 157                 compatible = "regulator-fixed";
 158
 159                 regulator-name = "SDHI2 Vcc";
 160                 regulator-min-microvolt = <3300000>;
 161                 regulator-max-microvolt = <3300000>;
 162
 163                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 164                 enable-active-high;
 165         };
 166
 167         vccq_sdhi2: regulator-vccq-sdhi2 {
 168                 compatible = "regulator-gpio";
 169
 170                 regulator-name = "SDHI2 VccQ";
 171                 regulator-min-microvolt = <1800000>;
 172                 regulator-max-microvolt = <3300000>;
 173
 174                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 175                 gpios-states = <1>;
 176                 states = <3300000 1>, <1800000 0>;
 177         };
 178
 179         audio_clock: audio_clock {
 180                 compatible = "fixed-clock";
 181                 #clock-cells = <0>;
 182                 clock-frequency = <11289600>;
 183         };
 184
 185         rsnd_ak4643: sound {
 186                 compatible = "simple-audio-card";
 187
 188                 simple-audio-card,format = "left_j";
 189                 simple-audio-card,bitclock-master = <&sndcodec>;
 190                 simple-audio-card,frame-master = <&sndcodec>;
 191
 192                 sndcpu: simple-audio-card,cpu {
 193                         sound-dai = <&rcar_sound>;
 194                 };
 195
 196                 sndcodec: simple-audio-card,codec {
 197                         sound-dai = <&ak4643>;
 198                         clocks = <&audio_clock>;
 199                 };
 200         };
 201
 202         vga-encoder {
 203                 compatible = "adi,adv7123";
 204
 205                 ports {
 206                         #address-cells = <1>;
 207                         #size-cells = <0>;
 208
 209                         port@0 {
 210                                 reg = <0>;
 211                                 adv7123_in: endpoint {
 212                                         remote-endpoint = <&du_out_rgb>;
 213                                 };
 214                         };
 215                         port@1 {
 216                                 reg = <1>;
 217                                 adv7123_out: endpoint {
 218                                         remote-endpoint = <&vga_in>;
 219                                 };
 220                         };
 221                 };
 222         };
 223
 224         vga {
 225                 compatible = "vga-connector";
 226
 227                 port {
 228                         vga_in: endpoint {
 229                                 remote-endpoint = <&adv7123_out>;
 230                         };
 231                 };
 232         };
 233
 234         hdmi-in {
 235                 compatible = "hdmi-connector";
 236                 type = "a";
 237
 238                 port {
 239                         hdmi_con_in: endpoint {
 240                                 remote-endpoint = <&adv7612_in>;
 241                         };
 242                 };
 243         };
 244
 245         cec_clock: cec-clock {
 246                 compatible = "fixed-clock";
 247                 #clock-cells = <0>;
 248                 clock-frequency = <12000000>;
 249         };
 250
 251         hdmi-out {
 252                 compatible = "hdmi-connector";
 253                 type = "a";
 254
 255                 port {
 256                         hdmi_con_out: endpoint {
 257                                 remote-endpoint = <&adv7511_out>;
 258                         };
 259                 };
 260         };
 261
 262         x2_clk: x2-clock {
 263                 compatible = "fixed-clock";
 264                 #clock-cells = <0>;
 265                 clock-frequency = <148500000>;
 266         };
 267
 268         x13_clk: x13-clock {
 269                 compatible = "fixed-clock";
 270                 #clock-cells = <0>;
 271                 clock-frequency = <148500000>;
 272         };
 273
 274         gpioi2c1: i2c-8 {
 275                 #address-cells = <1>;
 276                 #size-cells = <0>;
 277                 compatible = "i2c-gpio";
 278                 status = "disabled";
 279                 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 280                 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 281                 i2c-gpio,delay-us = <5>;
 282         };
 283
 284         gpioi2c2: i2c-9 {
 285                 #address-cells = <1>;
 286                 #size-cells = <0>;
 287                 compatible = "i2c-gpio";
 288                 status = "disabled";
 289                 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 290                 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 291                 i2c-gpio,delay-us = <5>;
 292         };
 293
 294         /*
 295          * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 296          * We use the I2C demuxer, so the desired IP core can be selected at runtime
 297          * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
 298          * Note: For testing the I2C slave feature, it is convenient to connect this
 299          * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 300          * instantiate the slave device at runtime according to the documentation.
 301          * You can then communicate with the slave via IIC3.
 302          *
 303          * IIC0/I2C0 does not appear to support fallback to GPIO.
 304          */
 305         i2cexio0: i2c-10 {
 306                 compatible = "i2c-demux-pinctrl";
 307                 i2c-parent = <&iic0>, <&i2c0>;
 308                 i2c-bus-name = "i2c-exio0";
 309                 #address-cells = <1>;
 310                 #size-cells = <0>;
 311         };
 312
 313         /*
 314          * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
 315          * This is similar to the arangement described for i2cexio0 (above)
 316          * with a fallback to GPIO also provided.
 317          */
 318         i2cexio1: i2c-11 {
 319                 compatible = "i2c-demux-pinctrl";
 320                 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 321                 i2c-bus-name = "i2c-exio1";
 322                 #address-cells = <1>;
 323                 #size-cells = <0>;
 324         };
 325
 326         /*
 327          * IIC2 and I2C2 may be switched using pinmux.
 328          * A fallback to GPIO is also provided.
 329          */
 330         i2chdmi: i2c-12 {
 331                 compatible = "i2c-demux-pinctrl";
 332                 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 333                 i2c-bus-name = "i2c-hdmi";
 334                 #address-cells = <1>;
 335                 #size-cells = <0>;
 336
 337                 ak4643: codec@12 {
 338                         compatible = "asahi-kasei,ak4643";
 339                         #sound-dai-cells = <0>;
 340                         reg = <0x12>;
 341                 };
 342
 343                 composite-in@20 {
 344                         compatible = "adi,adv7180";
 345                         reg = <0x20>;
 346
 347                         port {
 348                                 adv7180: endpoint {
 349                                         bus-width = <8>;
 350                                         remote-endpoint = <&vin1ep0>;
 351                                 };
 352                         };
 353                 };
 354
 355                 hdmi@39 {
 356                         compatible = "adi,adv7511w";
 357                         reg = <0x39>;
 358                         interrupt-parent = <&gpio1>;
 359                         interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 360                         clocks = <&cec_clock>;
 361                         clock-names = "cec";
 362
 363                         adi,input-depth = <8>;
 364                         adi,input-colorspace = "rgb";
 365                         adi,input-clock = "1x";
 366
 367                         ports {
 368                                 #address-cells = <1>;
 369                                 #size-cells = <0>;
 370
 371                                 port@0 {
 372                                         reg = <0>;
 373                                         adv7511_in: endpoint {
 374                                                 remote-endpoint = <&lvds0_out>;
 375                                         };
 376                                 };
 377
 378                                 port@1 {
 379                                         reg = <1>;
 380                                         adv7511_out: endpoint {
 381                                                 remote-endpoint = <&hdmi_con_out>;
 382                                         };
 383                                 };
 384                         };
 385                 };
 386
 387                 hdmi-in@4c {
 388                         compatible = "adi,adv7612";
 389                         reg = <0x4c>;
 390                         interrupt-parent = <&gpio1>;
 391                         interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 392                         default-input = <0>;
 393
 394                         ports {
 395                                 #address-cells = <1>;
 396                                 #size-cells = <0>;
 397
 398                                 port@0 {
 399                                         reg = <0>;
 400                                         adv7612_in: endpoint {
 401                                                 remote-endpoint = <&hdmi_con_in>;
 402                                         };
 403                                 };
 404
 405                                 port@2 {
 406                                         reg = <2>;
 407                                         adv7612_out: endpoint {
 408                                                 remote-endpoint = <&vin0ep2>;
 409                                         };
 410                                 };
 411                         };
 412                 };
 413         };
 414
 415         /*
 416          * IIC3 and I2C3 may be switched using pinmux.
 417          * IIC3/I2C3 does not appear to support fallback to GPIO.
 418          */
 419         i2cpwr: i2c-13 {
 420                 compatible = "i2c-demux-pinctrl";
 421                 pinctrl-names = "default";
 422                 pinctrl-0 = <&pmic_irq_pins>;
 423                 i2c-parent = <&iic3>, <&i2c3>;
 424                 i2c-bus-name = "i2c-pwr";
 425                 #address-cells = <1>;
 426                 #size-cells = <0>;
 427
 428                 pmic@58 {
 429                         compatible = "dlg,da9063";
 430                         reg = <0x58>;
 431                         interrupt-parent = <&irqc0>;
 432                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 433                         interrupt-controller;
 434
 435                         rtc {
 436                                 compatible = "dlg,da9063-rtc";
 437                         };
 438
 439                         wdt {
 440                                 compatible = "dlg,da9063-watchdog";
 441                         };
 442                 };
 443
 444                 vdd_dvfs: regulator@68 {
 445                         compatible = "dlg,da9210";
 446                         reg = <0x68>;
 447                         interrupt-parent = <&irqc0>;
 448                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 449
 450                         regulator-min-microvolt = <1000000>;
 451                         regulator-max-microvolt = <1000000>;
 452                         regulator-boot-on;
 453                         regulator-always-on;
 454                 };
 455         };
 456 };
 457
 458 &du {
 459         pinctrl-0 = <&du_pins>;
 460         pinctrl-names = "default";
 461         status = "okay";
 462
 463         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
 464                  <&x13_clk>, <&x2_clk>;
 465         clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
 466
 467         ports {
 468                 port@0 {
 469                         endpoint {
 470                                 remote-endpoint = <&adv7123_in>;
 471                         };
 472                 };
 473         };
 474 };
 475
 476 &lvds0 {
 477         status = "okay";
 478
 479         ports {
 480                 port@1 {
 481                         endpoint {
 482                                 remote-endpoint = <&adv7511_in>;
 483                         };
 484                 };
 485         };
 486 };
 487
 488 &lvds1 {
 489         ports {
 490                 port@1 {
 491                         lvds_connector: endpoint {
 492                         };
 493                 };
 494         };
 495 };
 496
 497 &extal_clk {
 498         clock-frequency = <20000000>;
 499 };
 500
 501 &pfc {
 502         pinctrl-0 = <&scif_clk_pins>;
 503         pinctrl-names = "default";
 504
 505         du_pins: du {
 506                 groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 507                 function = "du";
 508         };
 509
 510         scif0_pins: scif0 {
 511                 groups = "scif0_data";
 512                 function = "scif0";
 513         };
 514
 515         scif_clk_pins: scif_clk {
 516                 groups = "scif_clk";
 517                 function = "scif_clk";
 518         };
 519
 520         ether_pins: ether {
 521                 groups = "eth_link", "eth_mdio", "eth_rmii";
 522                 function = "eth";
 523         };
 524
 525         phy1_pins: phy1 {
 526                 groups = "intc_irq0";
 527                 function = "intc";
 528         };
 529
 530         scifa1_pins: scifa1 {
 531                 groups = "scifa1_data";
 532                 function = "scifa1";
 533         };
 534
 535         sdhi0_pins: sd0 {
 536                 groups = "sdhi0_data4", "sdhi0_ctrl";
 537                 function = "sdhi0";
 538                 power-source = <3300>;
 539         };
 540
 541         sdhi0_pins_uhs: sd0_uhs {
 542                 groups = "sdhi0_data4", "sdhi0_ctrl";
 543                 function = "sdhi0";
 544                 power-source = <1800>;
 545         };
 546
 547         sdhi2_pins: sd2 {
 548                 groups = "sdhi2_data4", "sdhi2_ctrl";
 549                 function = "sdhi2";
 550                 power-source = <3300>;
 551         };
 552
 553         sdhi2_pins_uhs: sd2_uhs {
 554                 groups = "sdhi2_data4", "sdhi2_ctrl";
 555                 function = "sdhi2";
 556                 power-source = <1800>;
 557         };
 558
 559         mmc1_pins: mmc1 {
 560                 groups = "mmc1_data8", "mmc1_ctrl";
 561                 function = "mmc1";
 562         };
 563
 564         qspi_pins: qspi {
 565                 groups = "qspi_ctrl", "qspi_data4";
 566                 function = "qspi";
 567         };
 568
 569         msiof1_pins: msiof1 {
 570                 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 571                                  "msiof1_tx";
 572                 function = "msiof1";
 573         };
 574
 575         i2c0_pins: i2c0 {
 576                 groups = "i2c0";
 577                 function = "i2c0";
 578         };
 579
 580         iic0_pins: iic0 {
 581                 groups = "iic0";
 582                 function = "iic0";
 583         };
 584
 585         i2c1_pins: i2c1 {
 586                 groups = "i2c1";
 587                 function = "i2c1";
 588         };
 589
 590         iic1_pins: iic1 {
 591                 groups = "iic1";
 592                 function = "iic1";
 593         };
 594
 595         i2c2_pins: i2c2 {
 596                 groups = "i2c2";
 597                 function = "i2c2";
 598         };
 599
 600         iic2_pins: iic2 {
 601                 groups = "iic2";
 602                 function = "iic2";
 603         };
 604
 605         i2c3_pins: i2c3 {
 606                 groups = "i2c3";
 607                 function = "i2c3";
 608         };
 609
 610         iic3_pins: iic3 {
 611                 groups = "iic3";
 612                 function = "iic3";
 613         };
 614
 615         pmic_irq_pins: pmicirq {
 616                 groups = "intc_irq2";
 617                 function = "intc";
 618         };
 619
 620         hsusb_pins: hsusb {
 621                 groups = "usb0_ovc_vbus";
 622                 function = "usb0";
 623         };
 624
 625         usb0_pins: usb0 {
 626                 groups = "usb0";
 627                 function = "usb0";
 628         };
 629
 630         usb1_pins: usb1 {
 631                 groups = "usb1";
 632                 function = "usb1";
 633         };
 634
 635         usb2_pins: usb2 {
 636                 groups = "usb2";
 637                 function = "usb2";
 638         };
 639
 640         vin0_pins: vin0 {
 641                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 642                 function = "vin0";
 643         };
 644
 645         vin1_pins: vin1 {
 646                 groups = "vin1_data8", "vin1_clk";
 647                 function = "vin1";
 648         };
 649
 650         sound_pins: sound {
 651                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 652                 function = "ssi";
 653         };
 654
 655         sound_clk_pins: sound_clk {
 656                 groups = "audio_clk_a";
 657                 function = "audio_clk";
 658         };
 659 };
 660
 661 &ether {
 662         pinctrl-0 = <&ether_pins &phy1_pins>;
 663         pinctrl-names = "default";
 664
 665         phy-handle = <&phy1>;
 666         renesas,ether-link-active-low;
 667         status = "okay";
 668
 669         phy1: ethernet-phy@1 {
 670                 reg = <1>;
 671                 interrupt-parent = <&irqc0>;
 672                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 673                 micrel,led-mode = <1>;
 674                 reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
 675         };
 676 };
 677
 678 &cmt0 {
 679         status = "okay";
 680 };
 681
 682 &mmcif1 {
 683         pinctrl-0 = <&mmc1_pins>;
 684         pinctrl-names = "default";
 685
 686         vmmc-supply = <&fixedregulator3v3>;
 687         bus-width = <8>;
 688         non-removable;
 689         status = "okay";
 690 };
 691
 692 &sata1 {
 693         status = "okay";
 694 };
 695
 696 &qspi {
 697         pinctrl-0 = <&qspi_pins>;
 698         pinctrl-names = "default";
 699
 700         status = "okay";
 701
 702         flash: flash@0 {
 703                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 704                 reg = <0>;
 705                 spi-max-frequency = <30000000>;
 706                 spi-tx-bus-width = <4>;
 707                 spi-rx-bus-width = <4>;
 708                 spi-cpha;
 709                 spi-cpol;
 710                 m25p,fast-read;
 711
 712                 partitions {
 713                         compatible = "fixed-partitions";
 714                         #address-cells = <1>;
 715                         #size-cells = <1>;
 716
 717                         partition@0 {
 718                                 label = "loader";
 719                                 reg = <0x00000000 0x00040000>;
 720                                 read-only;
 721                         };
 722                         partition@40000 {
 723                                 label = "user";
 724                                 reg = <0x00040000 0x00400000>;
 725                                 read-only;
 726                         };
 727                         partition@440000 {
 728                                 label = "flash";
 729                                 reg = <0x00440000 0x03bc0000>;
 730                         };
 731                 };
 732         };
 733 };
 734
 735 &scif0 {
 736         pinctrl-0 = <&scif0_pins>;
 737         pinctrl-names = "default";
 738
 739         status = "okay";
 740 };
 741
 742 &scifa1 {
 743         pinctrl-0 = <&scifa1_pins>;
 744         pinctrl-names = "default";
 745
 746         status = "okay";
 747 };
 748
 749 &scif_clk {
 750         clock-frequency = <14745600>;
 751 };
 752
 753 &msiof1 {
 754         pinctrl-0 = <&msiof1_pins>;
 755         pinctrl-names = "default";
 756
 757         status = "okay";
 758
 759         pmic: pmic@0 {
 760                 compatible = "renesas,r2a11302ft";
 761                 reg = <0>;
 762                 spi-max-frequency = <6000000>;
 763                 spi-cpol;
 764                 spi-cpha;
 765         };
 766 };
 767
 768 &sdhi0 {
 769         pinctrl-0 = <&sdhi0_pins>;
 770         pinctrl-1 = <&sdhi0_pins_uhs>;
 771         pinctrl-names = "default", "state_uhs";
 772
 773         vmmc-supply = <&vcc_sdhi0>;
 774         vqmmc-supply = <&vccq_sdhi0>;
 775         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 776         sd-uhs-sdr50;
 777         sd-uhs-sdr104;
 778         status = "okay";
 779 };
 780
 781 &sdhi2 {
 782         pinctrl-0 = <&sdhi2_pins>;
 783         pinctrl-1 = <&sdhi2_pins_uhs>;
 784         pinctrl-names = "default", "state_uhs";
 785
 786         vmmc-supply = <&vcc_sdhi2>;
 787         vqmmc-supply = <&vccq_sdhi2>;
 788         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 789         sd-uhs-sdr50;
 790         status = "okay";
 791 };
 792
 793 &cpu0 {
 794         cpu0-supply = <&vdd_dvfs>;
 795 };
 796
 797 &i2c0   {
 798         pinctrl-0 = <&i2c0_pins>;
 799         pinctrl-names = "i2c-exio0";
 800 };
 801
 802 &iic0   {
 803         pinctrl-0 = <&iic0_pins>;
 804         pinctrl-names = "i2c-exio0";
 805 };
 806
 807 &i2c1   {
 808         pinctrl-0 = <&i2c1_pins>;
 809         pinctrl-names = "i2c-exio1";
 810 };
 811
 812 &iic1   {
 813         pinctrl-0 = <&iic1_pins>;
 814         pinctrl-names = "i2c-exio1";
 815 };
 816
 817 &i2c2   {
 818         pinctrl-0 = <&i2c2_pins>;
 819         pinctrl-names = "i2c-hdmi";
 820
 821         clock-frequency = <100000>;
 822 };
 823
 824 &iic2   {
 825         pinctrl-0 = <&iic2_pins>;
 826         pinctrl-names = "i2c-hdmi";
 827
 828         clock-frequency = <100000>;
 829 };
 830
 831 &i2c3   {
 832         pinctrl-0 = <&i2c3_pins>;
 833         pinctrl-names = "i2c-pwr";
 834 };
 835
 836 &iic3   {
 837         pinctrl-0 = <&iic3_pins>;
 838         pinctrl-names = "i2c-pwr";
 839 };
 840
 841 &pci0 {
 842         status = "okay";
 843         pinctrl-0 = <&usb0_pins>;
 844         pinctrl-names = "default";
 845 };
 846
 847 &pci1 {
 848         status = "okay";
 849         pinctrl-0 = <&usb1_pins>;
 850         pinctrl-names = "default";
 851 };
 852
 853 &xhci {
 854         status = "okay";
 855         pinctrl-0 = <&usb2_pins>;
 856         pinctrl-names = "default";
 857 };
 858
 859 &pci2 {
 860         status = "okay";
 861         pinctrl-0 = <&usb2_pins>;
 862         pinctrl-names = "default";
 863 };
 864
 865 &hsusb {
 866         status = "okay";
 867         pinctrl-0 = <&hsusb_pins>;
 868         pinctrl-names = "default";
 869         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 870 };
 871
 872 &usbphy {
 873         status = "okay";
 874 };
 875
 876 /* HDMI video input */
 877 &vin0 {
 878         pinctrl-0 = <&vin0_pins>;
 879         pinctrl-names = "default";
 880
 881         status = "okay";
 882
 883         port {
 884                 vin0ep2: endpoint {
 885                         remote-endpoint = <&adv7612_out>;
 886                         bus-width = <24>;
 887                         hsync-active = <0>;
 888                         vsync-active = <0>;
 889                         pclk-sample = <1>;
 890                         data-active = <1>;
 891                 };
 892         };
 893 };
 894
 895 /* composite video input */
 896 &vin1 {
 897         pinctrl-0 = <&vin1_pins>;
 898         pinctrl-names = "default";
 899
 900         status = "okay";
 901
 902         port {
 903                 vin1ep0: endpoint {
 904                         remote-endpoint = <&adv7180>;
 905                         bus-width = <8>;
 906                 };
 907         };
 908 };
 909
 910 &rcar_sound {
 911         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 912         pinctrl-names = "default";
 913
 914         /* Single DAI */
 915         #sound-dai-cells = <0>;
 916
 917         status = "okay";
 918
 919         rcar_sound,dai {
 920                 dai0 {
 921                         playback = <&ssi0 &src2 &dvc0>;
 922                         capture  = <&ssi1 &src3 &dvc1>;
 923                 };
 924         };
 925 };
 926
 927 &rwdt {
 928         timeout-sec = <60>;
 929         status = "okay";
 930 };
 931
 932 &ssi1 {
 933         shared-pin;
 934 };