arch/arm/boot/dts/qcom-msm8974.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/interconnect/qcom,msm8974.h>
   5 #include <dt-bindings/interrupt-controller/arm-gic.h>
   6 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
   7 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
   8 #include <dt-bindings/clock/qcom,rpmcc.h>
   9 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15         model = "Qualcomm MSM8974";
  16         compatible = "qcom,msm8974";
  17         interrupt-parent = <&intc>;
  18
  19         reserved-memory {
  20                 #address-cells = <1>;
  21                 #size-cells = <1>;
  22                 ranges;
  23
  24                 mpss_region: mpss@8000000 {
  25                         reg = <0x08000000 0x5100000>;
  26                         no-map;
  27                 };
  28
  29                 mba_region: mba@d100000 {
  30                         reg = <0x0d100000 0x100000>;
  31                         no-map;
  32                 };
  33
  34                 wcnss_region: wcnss@d200000 {
  35                         reg = <0x0d200000 0xa00000>;
  36                         no-map;
  37                 };
  38
  39                 adsp_region: adsp@dc00000 {
  40                         reg = <0x0dc00000 0x1900000>;
  41                         no-map;
  42                 };
  43
  44                 venus@f500000 {
  45                         reg = <0x0f500000 0x500000>;
  46                         no-map;
  47                 };
  48
  49                 smem_region: smem@fa00000 {
  50                         reg = <0xfa00000 0x200000>;
  51                         no-map;
  52                 };
  53
  54                 tz@fc00000 {
  55                         reg = <0x0fc00000 0x160000>;
  56                         no-map;
  57                 };
  58
  59                 rfsa@fd60000 {
  60                         reg = <0x0fd60000 0x20000>;
  61                         no-map;
  62                 };
  63
  64                 rmtfs@fd80000 {
  65                         compatible = "qcom,rmtfs-mem";
  66                         reg = <0x0fd80000 0x180000>;
  67                         no-map;
  68
  69                         qcom,client-id = <1>;
  70                 };
  71         };
  72
  73         cpus {
  74                 #address-cells = <1>;
  75                 #size-cells = <0>;
  76                 interrupts = <GIC_PPI 9 0xf04>;
  77
  78                 CPU0: cpu@0 {
  79                         compatible = "qcom,krait";
  80                         enable-method = "qcom,kpss-acc-v2";
  81                         device_type = "cpu";
  82                         reg = <0>;
  83                         next-level-cache = <&L2>;
  84                         qcom,acc = <&acc0>;
  85                         qcom,saw = <&saw0>;
  86                         cpu-idle-states = <&CPU_SPC>;
  87                 };
  88
  89                 CPU1: cpu@1 {
  90                         compatible = "qcom,krait";
  91                         enable-method = "qcom,kpss-acc-v2";
  92                         device_type = "cpu";
  93                         reg = <1>;
  94                         next-level-cache = <&L2>;
  95                         qcom,acc = <&acc1>;
  96                         qcom,saw = <&saw1>;
  97                         cpu-idle-states = <&CPU_SPC>;
  98                 };
  99
 100                 CPU2: cpu@2 {
 101                         compatible = "qcom,krait";
 102                         enable-method = "qcom,kpss-acc-v2";
 103                         device_type = "cpu";
 104                         reg = <2>;
 105                         next-level-cache = <&L2>;
 106                         qcom,acc = <&acc2>;
 107                         qcom,saw = <&saw2>;
 108                         cpu-idle-states = <&CPU_SPC>;
 109                 };
 110
 111                 CPU3: cpu@3 {
 112                         compatible = "qcom,krait";
 113                         enable-method = "qcom,kpss-acc-v2";
 114                         device_type = "cpu";
 115                         reg = <3>;
 116                         next-level-cache = <&L2>;
 117                         qcom,acc = <&acc3>;
 118                         qcom,saw = <&saw3>;
 119                         cpu-idle-states = <&CPU_SPC>;
 120                 };
 121
 122                 L2: l2-cache {
 123                         compatible = "cache";
 124                         cache-level = <2>;
 125                         qcom,saw = <&saw_l2>;
 126                 };
 127
 128                 idle-states {
 129                         CPU_SPC: spc {
 130                                 compatible = "qcom,idle-state-spc",
 131                                                 "arm,idle-state";
 132                                 entry-latency-us = <150>;
 133                                 exit-latency-us = <200>;
 134                                 min-residency-us = <2000>;
 135                         };
 136                 };
 137         };
 138
 139         memory {
 140                 device_type = "memory";
 141                 reg = <0x0 0x0>;
 142         };
 143
 144         thermal-zones {
 145                 cpu-thermal0 {
 146                         polling-delay-passive = <250>;
 147                         polling-delay = <1000>;
 148
 149                         thermal-sensors = <&tsens 5>;
 150
 151                         trips {
 152                                 cpu_alert0: trip0 {
 153                                         temperature = <75000>;
 154                                         hysteresis = <2000>;
 155                                         type = "passive";
 156                                 };
 157                                 cpu_crit0: trip1 {
 158                                         temperature = <110000>;
 159                                         hysteresis = <2000>;
 160                                         type = "critical";
 161                                 };
 162                         };
 163                 };
 164
 165                 cpu-thermal1 {
 166                         polling-delay-passive = <250>;
 167                         polling-delay = <1000>;
 168
 169                         thermal-sensors = <&tsens 6>;
 170
 171                         trips {
 172                                 cpu_alert1: trip0 {
 173                                         temperature = <75000>;
 174                                         hysteresis = <2000>;
 175                                         type = "passive";
 176                                 };
 177                                 cpu_crit1: trip1 {
 178                                         temperature = <110000>;
 179                                         hysteresis = <2000>;
 180                                         type = "critical";
 181                                 };
 182                         };
 183                 };
 184
 185                 cpu-thermal2 {
 186                         polling-delay-passive = <250>;
 187                         polling-delay = <1000>;
 188
 189                         thermal-sensors = <&tsens 7>;
 190
 191                         trips {
 192                                 cpu_alert2: trip0 {
 193                                         temperature = <75000>;
 194                                         hysteresis = <2000>;
 195                                         type = "passive";
 196                                 };
 197                                 cpu_crit2: trip1 {
 198                                         temperature = <110000>;
 199                                         hysteresis = <2000>;
 200                                         type = "critical";
 201                                 };
 202                         };
 203                 };
 204
 205                 cpu-thermal3 {
 206                         polling-delay-passive = <250>;
 207                         polling-delay = <1000>;
 208
 209                         thermal-sensors = <&tsens 8>;
 210
 211                         trips {
 212                                 cpu_alert3: trip0 {
 213                                         temperature = <75000>;
 214                                         hysteresis = <2000>;
 215                                         type = "passive";
 216                                 };
 217                                 cpu_crit3: trip1 {
 218                                         temperature = <110000>;
 219                                         hysteresis = <2000>;
 220                                         type = "critical";
 221                                 };
 222                         };
 223                 };
 224
 225                 q6-dsp-thermal {
 226                         polling-delay-passive = <250>;
 227                         polling-delay = <1000>;
 228
 229                         thermal-sensors = <&tsens 1>;
 230
 231                         trips {
 232                                 q6_dsp_alert0: trip-point0 {
 233                                         temperature = <90000>;
 234                                         hysteresis = <2000>;
 235                                         type = "hot";
 236                                 };
 237                         };
 238                 };
 239
 240                 modemtx-thermal {
 241                         polling-delay-passive = <250>;
 242                         polling-delay = <1000>;
 243
 244                         thermal-sensors = <&tsens 2>;
 245
 246                         trips {
 247                                 modemtx_alert0: trip-point0 {
 248                                         temperature = <90000>;
 249                                         hysteresis = <2000>;
 250                                         type = "hot";
 251                                 };
 252                         };
 253                 };
 254
 255                 video-thermal {
 256                         polling-delay-passive = <250>;
 257                         polling-delay = <1000>;
 258
 259                         thermal-sensors = <&tsens 3>;
 260
 261                         trips {
 262                                 video_alert0: trip-point0 {
 263                                         temperature = <95000>;
 264                                         hysteresis = <2000>;
 265                                         type = "hot";
 266                                 };
 267                         };
 268                 };
 269
 270                 wlan-thermal {
 271                         polling-delay-passive = <250>;
 272                         polling-delay = <1000>;
 273
 274                         thermal-sensors = <&tsens 4>;
 275
 276                         trips {
 277                                 wlan_alert0: trip-point0 {
 278                                         temperature = <105000>;
 279                                         hysteresis = <2000>;
 280                                         type = "hot";
 281                                 };
 282                         };
 283                 };
 284
 285                 gpu-thermal-top {
 286                         polling-delay-passive = <250>;
 287                         polling-delay = <1000>;
 288
 289                         thermal-sensors = <&tsens 9>;
 290
 291                         trips {
 292                                 gpu1_alert0: trip-point0 {
 293                                         temperature = <90000>;
 294                                         hysteresis = <2000>;
 295                                         type = "hot";
 296                                 };
 297                         };
 298                 };
 299
 300                 gpu-thermal-bottom {
 301                         polling-delay-passive = <250>;
 302                         polling-delay = <1000>;
 303
 304                         thermal-sensors = <&tsens 10>;
 305
 306                         trips {
 307                                 gpu2_alert0: trip-point0 {
 308                                         temperature = <90000>;
 309                                         hysteresis = <2000>;
 310                                         type = "hot";
 311                                 };
 312                         };
 313                 };
 314         };
 315
 316         cpu-pmu {
 317                 compatible = "qcom,krait-pmu";
 318                 interrupts = <GIC_PPI 7 0xf04>;
 319         };
 320
 321         clocks {
 322                 xo_board: xo_board {
 323                         compatible = "fixed-clock";
 324                         #clock-cells = <0>;
 325                         clock-frequency = <19200000>;
 326                 };
 327
 328                 sleep_clk: sleep_clk {
 329                         compatible = "fixed-clock";
 330                         #clock-cells = <0>;
 331                         clock-frequency = <32768>;
 332                 };
 333         };
 334
 335         timer {
 336                 compatible = "arm,armv7-timer";
 337                 interrupts = <GIC_PPI 2 0xf08>,
 338                              <GIC_PPI 3 0xf08>,
 339                              <GIC_PPI 4 0xf08>,
 340                              <GIC_PPI 1 0xf08>;
 341                 clock-frequency = <19200000>;
 342         };
 343
 344         adsp-pil {
 345                 compatible = "qcom,msm8974-adsp-pil";
 346
 347                 interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 348                                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 349                                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 350                                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 351                                       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 352                 interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 353
 354                 cx-supply = <&pm8841_s2>;
 355
 356                 clocks = <&xo_board>;
 357                 clock-names = "xo";
 358
 359                 memory-region = <&adsp_region>;
 360
 361                 qcom,smem-states = <&adsp_smp2p_out 0>;
 362                 qcom,smem-state-names = "stop";
 363
 364                 smd-edge {
 365                         interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 366
 367                         qcom,ipc = <&apcs 8 8>;
 368                         qcom,smd-edge = <1>;
 369
 370                         label = "lpass";
 371                 };
 372         };
 373
 374         smem {
 375                 compatible = "qcom,smem";
 376
 377                 memory-region = <&smem_region>;
 378                 qcom,rpm-msg-ram = <&rpm_msg_ram>;
 379
 380                 hwlocks = <&tcsr_mutex 3>;
 381         };
 382
 383         smp2p-adsp {
 384                 compatible = "qcom,smp2p";
 385                 qcom,smem = <443>, <429>;
 386
 387                 interrupt-parent = <&intc>;
 388                 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
 389
 390                 qcom,ipc = <&apcs 8 10>;
 391
 392                 qcom,local-pid = <0>;
 393                 qcom,remote-pid = <2>;
 394
 395                 adsp_smp2p_out: master-kernel {
 396                         qcom,entry-name = "master-kernel";
 397                         #qcom,smem-state-cells = <1>;
 398                 };
 399
 400                 adsp_smp2p_in: slave-kernel {
 401                         qcom,entry-name = "slave-kernel";
 402
 403                         interrupt-controller;
 404                         #interrupt-cells = <2>;
 405                 };
 406         };
 407
 408         smp2p-modem {
 409                 compatible = "qcom,smp2p";
 410                 qcom,smem = <435>, <428>;
 411
 412                 interrupt-parent = <&intc>;
 413                 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
 414
 415                 qcom,ipc = <&apcs 8 14>;
 416
 417                 qcom,local-pid = <0>;
 418                 qcom,remote-pid = <1>;
 419
 420                 modem_smp2p_out: master-kernel {
 421                         qcom,entry-name = "master-kernel";
 422                         #qcom,smem-state-cells = <1>;
 423                 };
 424
 425                 modem_smp2p_in: slave-kernel {
 426                         qcom,entry-name = "slave-kernel";
 427
 428                         interrupt-controller;
 429                         #interrupt-cells = <2>;
 430                 };
 431         };
 432
 433         smp2p-wcnss {
 434                 compatible = "qcom,smp2p";
 435                 qcom,smem = <451>, <431>;
 436
 437                 interrupt-parent = <&intc>;
 438                 interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
 439
 440                 qcom,ipc = <&apcs 8 18>;
 441
 442                 qcom,local-pid = <0>;
 443                 qcom,remote-pid = <4>;
 444
 445                 wcnss_smp2p_out: master-kernel {
 446                         qcom,entry-name = "master-kernel";
 447
 448                         #qcom,smem-state-cells = <1>;
 449                 };
 450
 451                 wcnss_smp2p_in: slave-kernel {
 452                         qcom,entry-name = "slave-kernel";
 453
 454                         interrupt-controller;
 455                         #interrupt-cells = <2>;
 456                 };
 457         };
 458
 459         smsm {
 460                 compatible = "qcom,smsm";
 461
 462                 #address-cells = <1>;
 463                 #size-cells = <0>;
 464
 465                 qcom,ipc-1 = <&apcs 8 13>;
 466                 qcom,ipc-2 = <&apcs 8 9>;
 467                 qcom,ipc-3 = <&apcs 8 19>;
 468
 469                 apps_smsm: apps@0 {
 470                         reg = <0>;
 471
 472                         #qcom,smem-state-cells = <1>;
 473                 };
 474
 475                 modem_smsm: modem@1 {
 476                         reg = <1>;
 477                         interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 478
 479                         interrupt-controller;
 480                         #interrupt-cells = <2>;
 481                 };
 482
 483                 adsp_smsm: adsp@2 {
 484                         reg = <2>;
 485                         interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
 486
 487                         interrupt-controller;
 488                         #interrupt-cells = <2>;
 489                 };
 490
 491                 wcnss_smsm: wcnss@7 {
 492                         reg = <7>;
 493                         interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
 494
 495                         interrupt-controller;
 496                         #interrupt-cells = <2>;
 497                 };
 498         };
 499
 500         firmware {
 501                 scm {
 502                         compatible = "qcom,scm";
 503                         clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 504                         clock-names = "core", "bus", "iface";
 505                 };
 506         };
 507
 508         soc: soc {
 509                 #address-cells = <1>;
 510                 #size-cells = <1>;
 511                 ranges;
 512                 compatible = "simple-bus";
 513
 514                 intc: interrupt-controller@f9000000 {
 515                         compatible = "qcom,msm-qgic2";
 516                         interrupt-controller;
 517                         #interrupt-cells = <3>;
 518                         reg = <0xf9000000 0x1000>,
 519                               <0xf9002000 0x1000>;
 520                 };
 521
 522                 apcs: syscon@f9011000 {
 523                         compatible = "syscon";
 524                         reg = <0xf9011000 0x1000>;
 525                 };
 526
 527                 qfprom: qfprom@fc4bc000 {
 528                         #address-cells = <1>;
 529                         #size-cells = <1>;
 530                         compatible = "qcom,qfprom";
 531                         reg = <0xfc4bc000 0x1000>;
 532                         tsens_calib: calib@d0 {
 533                                 reg = <0xd0 0x18>;
 534                         };
 535                         tsens_backup: backup@440 {
 536                                 reg = <0x440 0x10>;
 537                         };
 538                 };
 539
 540                 tsens: thermal-sensor@fc4a9000 {
 541                         compatible = "qcom,msm8974-tsens";
 542                         reg = <0xfc4a9000 0x1000>, /* TM */
 543                               <0xfc4a8000 0x1000>; /* SROT */
 544                         nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 545                         nvmem-cell-names = "calib", "calib_backup";
 546                         #qcom,sensors = <11>;
 547                         interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 548                         interrupt-names = "uplow";
 549                         #thermal-sensor-cells = <1>;
 550                 };
 551
 552                 timer@f9020000 {
 553                         #address-cells = <1>;
 554                         #size-cells = <1>;
 555                         ranges;
 556                         compatible = "arm,armv7-timer-mem";
 557                         reg = <0xf9020000 0x1000>;
 558                         clock-frequency = <19200000>;
 559
 560                         frame@f9021000 {
 561                                 frame-number = <0>;
 562                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 563                                              <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 564                                 reg = <0xf9021000 0x1000>,
 565                                       <0xf9022000 0x1000>;
 566                         };
 567
 568                         frame@f9023000 {
 569                                 frame-number = <1>;
 570                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 571                                 reg = <0xf9023000 0x1000>;
 572                                 status = "disabled";
 573                         };
 574
 575                         frame@f9024000 {
 576                                 frame-number = <2>;
 577                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 578                                 reg = <0xf9024000 0x1000>;
 579                                 status = "disabled";
 580                         };
 581
 582                         frame@f9025000 {
 583                                 frame-number = <3>;
 584                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 585                                 reg = <0xf9025000 0x1000>;
 586                                 status = "disabled";
 587                         };
 588
 589                         frame@f9026000 {
 590                                 frame-number = <4>;
 591                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 592                                 reg = <0xf9026000 0x1000>;
 593                                 status = "disabled";
 594                         };
 595
 596                         frame@f9027000 {
 597                                 frame-number = <5>;
 598                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 599                                 reg = <0xf9027000 0x1000>;
 600                                 status = "disabled";
 601                         };
 602
 603                         frame@f9028000 {
 604                                 frame-number = <6>;
 605                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 606                                 reg = <0xf9028000 0x1000>;
 607                                 status = "disabled";
 608                         };
 609                 };
 610
 611                 saw0: power-controller@f9089000 {
 612                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 613                         reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 614                 };
 615
 616                 saw1: power-controller@f9099000 {
 617                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 618                         reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 619                 };
 620
 621                 saw2: power-controller@f90a9000 {
 622                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 623                         reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 624                 };
 625
 626                 saw3: power-controller@f90b9000 {
 627                         compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 628                         reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 629                 };
 630
 631                 saw_l2: power-controller@f9012000 {
 632                         compatible = "qcom,saw2";
 633                         reg = <0xf9012000 0x1000>;
 634                         regulator;
 635                 };
 636
 637                 acc0: clock-controller@f9088000 {
 638                         compatible = "qcom,kpss-acc-v2";
 639                         reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 640                 };
 641
 642                 acc1: clock-controller@f9098000 {
 643                         compatible = "qcom,kpss-acc-v2";
 644                         reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 645                 };
 646
 647                 acc2: clock-controller@f90a8000 {
 648                         compatible = "qcom,kpss-acc-v2";
 649                         reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 650                 };
 651
 652                 acc3: clock-controller@f90b8000 {
 653                         compatible = "qcom,kpss-acc-v2";
 654                         reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 655                 };
 656
 657                 restart@fc4ab000 {
 658                         compatible = "qcom,pshold";
 659                         reg = <0xfc4ab000 0x4>;
 660                 };
 661
 662                 gcc: clock-controller@fc400000 {
 663                         compatible = "qcom,gcc-msm8974";
 664                         #clock-cells = <1>;
 665                         #reset-cells = <1>;
 666                         #power-domain-cells = <1>;
 667                         reg = <0xfc400000 0x4000>;
 668                 };
 669
 670                 tcsr: syscon@fd4a0000 {
 671                         compatible = "syscon";
 672                         reg = <0xfd4a0000 0x10000>;
 673                 };
 674
 675                 tcsr_mutex_block: syscon@fd484000 {
 676                         compatible = "syscon";
 677                         reg = <0xfd484000 0x2000>;
 678                 };
 679
 680                 mmcc: clock-controller@fd8c0000 {
 681                         compatible = "qcom,mmcc-msm8974";
 682                         #clock-cells = <1>;
 683                         #reset-cells = <1>;
 684                         #power-domain-cells = <1>;
 685                         reg = <0xfd8c0000 0x6000>;
 686                 };
 687
 688                 tcsr_mutex: tcsr-mutex {
 689                         compatible = "qcom,tcsr-mutex";
 690                         syscon = <&tcsr_mutex_block 0 0x80>;
 691
 692                         #hwlock-cells = <1>;
 693                 };
 694
 695                 rpm_msg_ram: memory@fc428000 {
 696                         compatible = "qcom,rpm-msg-ram";
 697                         reg = <0xfc428000 0x4000>;
 698                 };
 699
 700                 blsp1_uart1: serial@f991d000 {
 701                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 702                         reg = <0xf991d000 0x1000>;
 703                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 704                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 705                         clock-names = "core", "iface";
 706                         status = "disabled";
 707                 };
 708
 709                 blsp1_uart2: serial@f991e000 {
 710                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 711                         reg = <0xf991e000 0x1000>;
 712                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 713                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 714                         clock-names = "core", "iface";
 715                         status = "disabled";
 716                 };
 717
 718                 blsp2_uart10: serial@f9960000 {
 719                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 720                         reg = <0xf9960000 0x1000>;
 721                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 722                         clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 723                         clock-names = "core", "iface";
 724                         status = "disabled";
 725                 };
 726
 727                 sdhci@f9824900 {
 728                         compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 729                         reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 730                         reg-names = "hc_mem", "core_mem";
 731                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 732                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 733                         interrupt-names = "hc_irq", "pwr_irq";
 734                         clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 735                                  <&gcc GCC_SDCC1_AHB_CLK>,
 736                                  <&xo_board>;
 737                         clock-names = "core", "iface", "xo";
 738                         status = "disabled";
 739                 };
 740
 741                 sdhci@f9864900 {
 742                         compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 743                         reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
 744                         reg-names = "hc_mem", "core_mem";
 745                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
 746                                      <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 747                         interrupt-names = "hc_irq", "pwr_irq";
 748                         clocks = <&gcc GCC_SDCC3_APPS_CLK>,
 749                                  <&gcc GCC_SDCC3_AHB_CLK>,
 750                                  <&xo_board>;
 751                         clock-names = "core", "iface", "xo";
 752                         status = "disabled";
 753                 };
 754
 755                 sdhci@f98a4900 {
 756                         compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 757                         reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 758                         reg-names = "hc_mem", "core_mem";
 759                         interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 760                                      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 761                         interrupt-names = "hc_irq", "pwr_irq";
 762                         clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 763                                  <&gcc GCC_SDCC2_AHB_CLK>,
 764                                  <&xo_board>;
 765                         clock-names = "core", "iface", "xo";
 766                         status = "disabled";
 767                 };
 768
 769                 otg: usb@f9a55000 {
 770                         compatible = "qcom,ci-hdrc";
 771                         reg = <0xf9a55000 0x200>,
 772                               <0xf9a55200 0x200>;
 773                         interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 774                         clocks = <&gcc GCC_USB_HS_AHB_CLK>,
 775                                  <&gcc GCC_USB_HS_SYSTEM_CLK>;
 776                         clock-names = "iface", "core";
 777                         assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
 778                         assigned-clock-rates = <75000000>;
 779                         resets = <&gcc GCC_USB_HS_BCR>;
 780                         reset-names = "core";
 781                         phy_type = "ulpi";
 782                         dr_mode = "otg";
 783                         ahb-burst-config = <0>;
 784                         phy-names = "usb-phy";
 785                         status = "disabled";
 786                         #reset-cells = <1>;
 787
 788                         ulpi {
 789                                 usb_hs1_phy: phy@a {
 790                                         compatible = "qcom,usb-hs-phy-msm8974",
 791                                                      "qcom,usb-hs-phy";
 792                                         #phy-cells = <0>;
 793                                         clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 794                                         clock-names = "ref", "sleep";
 795                                         resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
 796                                         reset-names = "phy", "por";
 797                                         status = "disabled";
 798                                 };
 799
 800                                 usb_hs2_phy: phy@b {
 801                                         compatible = "qcom,usb-hs-phy-msm8974",
 802                                                      "qcom,usb-hs-phy";
 803                                         #phy-cells = <0>;
 804                                         clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
 805                                         clock-names = "ref", "sleep";
 806                                         resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
 807                                         reset-names = "phy", "por";
 808                                         status = "disabled";
 809                                 };
 810                         };
 811                 };
 812
 813                 rng@f9bff000 {
 814                         compatible = "qcom,prng";
 815                         reg = <0xf9bff000 0x200>;
 816                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 817                         clock-names = "core";
 818                 };
 819
 820                 remoteproc@fc880000 {
 821                         compatible = "qcom,msm8974-mss-pil";
 822                         reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
 823                         reg-names = "qdsp6", "rmb";
 824
 825                         interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
 826                                               <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 827                                               <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 828                                               <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 829                                               <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 830                         interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 831
 832                         clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
 833                                  <&gcc GCC_MSS_CFG_AHB_CLK>,
 834                                  <&gcc GCC_BOOT_ROM_AHB_CLK>,
 835                                  <&xo_board>;
 836                         clock-names = "iface", "bus", "mem", "xo";
 837
 838                         resets = <&gcc GCC_MSS_RESTART>;
 839                         reset-names = "mss_restart";
 840
 841                         cx-supply = <&pm8841_s2>;
 842                         mss-supply = <&pm8841_s3>;
 843                         mx-supply = <&pm8841_s1>;
 844                         pll-supply = <&pm8941_l12>;
 845
 846                         qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
 847
 848                         qcom,smem-states = <&modem_smp2p_out 0>;
 849                         qcom,smem-state-names = "stop";
 850
 851                         mba {
 852                                 memory-region = <&mba_region>;
 853                         };
 854
 855                         mpss {
 856                                 memory-region = <&mpss_region>;
 857                         };
 858
 859                         smd-edge {
 860                                 interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
 861
 862                                 qcom,ipc = <&apcs 8 12>;
 863                                 qcom,smd-edge = <0>;
 864
 865                                 label = "modem";
 866                         };
 867                 };
 868
 869                 pronto: remoteproc@fb21b000 {
 870                         compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 871                         reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
 872                         reg-names = "ccu", "dxe", "pmu";
 873
 874                         memory-region = <&wcnss_region>;
 875
 876                         interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
 877                                               <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 878                                               <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
 879                                               <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
 880                                               <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 881                         interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 882
 883                         vddpx-supply = <&pm8941_s3>;
 884
 885                         qcom,smem-states = <&wcnss_smp2p_out 0>;
 886                         qcom,smem-state-names = "stop";
 887
 888                         status = "disabled";
 889
 890                         iris {
 891                                 compatible = "qcom,wcn3680";
 892
 893                                 clocks = <&rpmcc RPM_SMD_CXO_A2>;
 894                                 clock-names = "xo";
 895
 896                                 vddxo-supply = <&pm8941_l6>;
 897                                 vddrfa-supply = <&pm8941_l11>;
 898                                 vddpa-supply = <&pm8941_l19>;
 899                                 vdddig-supply = <&pm8941_s3>;
 900                         };
 901
 902                         smd-edge {
 903                                 interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
 904
 905                                 qcom,ipc = <&apcs 8 17>;
 906                                 qcom,smd-edge = <6>;
 907
 908                                 wcnss {
 909                                         compatible = "qcom,wcnss";
 910                                         qcom,smd-channels = "WCNSS_CTRL";
 911                                         status = "disabled";
 912
 913                                         qcom,mmio = <&pronto>;
 914
 915                                         bt {
 916                                                 compatible = "qcom,wcnss-bt";
 917                                         };
 918
 919                                         wifi {
 920                                                 compatible = "qcom,wcnss-wlan";
 921
 922                                                 interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
 923                                                              <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
 924                                                 interrupt-names = "tx", "rx";
 925
 926                                                 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
 927                                                 qcom,smem-state-names = "tx-enable", "tx-rings-empty";
 928                                         };
 929                                 };
 930                         };
 931                 };
 932
 933                 msmgpio: pinctrl@fd510000 {
 934                         compatible = "qcom,msm8974-pinctrl";
 935                         reg = <0xfd510000 0x4000>;
 936                         gpio-controller;
 937                         gpio-ranges = <&msmgpio 0 0 146>;
 938                         #gpio-cells = <2>;
 939                         interrupt-controller;
 940                         #interrupt-cells = <2>;
 941                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 942                 };
 943
 944                 i2c@f9923000 {
 945                         status = "disabled";
 946                         compatible = "qcom,i2c-qup-v2.1.1";
 947                         reg = <0xf9923000 0x1000>;
 948                         interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
 949                         clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 950                         clock-names = "core", "iface";
 951                         #address-cells = <1>;
 952                         #size-cells = <0>;
 953                 };
 954
 955                 i2c@f9924000 {
 956                         status = "disabled";
 957                         compatible = "qcom,i2c-qup-v2.1.1";
 958                         reg = <0xf9924000 0x1000>;
 959                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 960                         clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 961                         clock-names = "core", "iface";
 962                         #address-cells = <1>;
 963                         #size-cells = <0>;
 964                 };
 965
 966                 blsp_i2c3: i2c@f9925000 {
 967                         status = "disabled";
 968                         compatible = "qcom,i2c-qup-v2.1.1";
 969                         reg = <0xf9925000 0x1000>;
 970                         interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 971                         clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 972                         clock-names = "core", "iface";
 973                         #address-cells = <1>;
 974                         #size-cells = <0>;
 975                 };
 976
 977                 blsp_i2c8: i2c@f9964000 {
 978                         status = "disabled";
 979                         compatible = "qcom,i2c-qup-v2.1.1";
 980                         reg = <0xf9964000 0x1000>;
 981                         interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 982                         clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 983                         clock-names = "core", "iface";
 984                         #address-cells = <1>;
 985                         #size-cells = <0>;
 986                 };
 987
 988                 blsp_i2c11: i2c@f9967000 {
 989                         status = "disabled";
 990                         compatible = "qcom,i2c-qup-v2.1.1";
 991                         reg = <0xf9967000 0x1000>;
 992                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 993                         clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 994                         clock-names = "core", "iface";
 995                         #address-cells = <1>;
 996                         #size-cells = <0>;
 997                         dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
 998                         dma-names = "tx", "rx";
 999                 };
1000
1001                 blsp_i2c12: i2c@f9968000 {
1002                         status = "disabled";
1003                         compatible = "qcom,i2c-qup-v2.1.1";
1004                         reg = <0xf9968000 0x1000>;
1005                         interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
1006                         clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1007                         clock-names = "core", "iface";
1008                         #address-cells = <1>;
1009                         #size-cells = <0>;
1010                 };
1011
1012                 spmi_bus: spmi@fc4cf000 {
1013                         compatible = "qcom,spmi-pmic-arb";
1014                         reg-names = "core", "intr", "cnfg";
1015                         reg = <0xfc4cf000 0x1000>,
1016                               <0xfc4cb000 0x1000>,
1017                               <0xfc4ca000 0x1000>;
1018                         interrupt-names = "periph_irq";
1019                         interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1020                         qcom,ee = <0>;
1021                         qcom,channel = <0>;
1022                         #address-cells = <2>;
1023                         #size-cells = <0>;
1024                         interrupt-controller;
1025                         #interrupt-cells = <4>;
1026                 };
1027
1028                 blsp2_dma: dma-controller@f9944000 {
1029                         compatible = "qcom,bam-v1.4.0";
1030                         reg = <0xf9944000 0x19000>;
1031                         interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
1032                         clocks = <&gcc GCC_BLSP2_AHB_CLK>;
1033                         clock-names = "bam_clk";
1034                         #dma-cells = <1>;
1035                         qcom,ee = <0>;
1036                 };
1037
1038                 etr@fc322000 {
1039                         compatible = "arm,coresight-tmc", "arm,primecell";
1040                         reg = <0xfc322000 0x1000>;
1041
1042                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1043                         clock-names = "apb_pclk", "atclk";
1044
1045                         in-ports {
1046                                 port {
1047                                         etr_in: endpoint {
1048                                                 remote-endpoint = <&replicator_out0>;
1049                                         };
1050                                 };
1051                         };
1052                 };
1053
1054                 tpiu@fc318000 {
1055                         compatible = "arm,coresight-tpiu", "arm,primecell";
1056                         reg = <0xfc318000 0x1000>;
1057
1058                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1059                         clock-names = "apb_pclk", "atclk";
1060
1061                         in-ports {
1062                                 port {
1063                                         tpiu_in: endpoint {
1064                                                 remote-endpoint = <&replicator_out1>;
1065                                         };
1066                                  };
1067                         };
1068                 };
1069
1070                 replicator@fc31c000 {
1071                         compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1072                         reg = <0xfc31c000 0x1000>;
1073
1074                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1075                         clock-names = "apb_pclk", "atclk";
1076
1077                         out-ports {
1078                                 #address-cells = <1>;
1079                                 #size-cells = <0>;
1080
1081                                 port@0 {
1082                                         reg = <0>;
1083                                         replicator_out0: endpoint {
1084                                                 remote-endpoint = <&etr_in>;
1085                                         };
1086                                 };
1087                                 port@1 {
1088                                         reg = <1>;
1089                                         replicator_out1: endpoint {
1090                                                 remote-endpoint = <&tpiu_in>;
1091                                         };
1092                                 };
1093                         };
1094
1095                         in-ports {
1096                                 port {
1097                                         replicator_in: endpoint {
1098                                                 remote-endpoint = <&etf_out>;
1099                                         };
1100                                 };
1101                         };
1102                 };
1103
1104                 etf@fc307000 {
1105                         compatible = "arm,coresight-tmc", "arm,primecell";
1106                         reg = <0xfc307000 0x1000>;
1107
1108                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1109                         clock-names = "apb_pclk", "atclk";
1110
1111                         out-ports {
1112                                 port {
1113                                         etf_out: endpoint {
1114                                                 remote-endpoint = <&replicator_in>;
1115                                         };
1116                                 };
1117                         };
1118
1119                         in-ports {
1120                                 port {
1121                                         etf_in: endpoint {
1122                                                 remote-endpoint = <&merger_out>;
1123                                         };
1124                                 };
1125                         };
1126                 };
1127
1128                 funnel@fc31b000 {
1129                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1130                         reg = <0xfc31b000 0x1000>;
1131
1132                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1133                         clock-names = "apb_pclk", "atclk";
1134
1135                         in-ports {
1136                                 #address-cells = <1>;
1137                                 #size-cells = <0>;
1138
1139                                 /*
1140                                  * Not described input ports:
1141                                  * 0 - connected trought funnel to Audio, Modem and
1142                                  *     Resource and Power Manager CPU's
1143                                  * 2...7 - not-connected
1144                                  */
1145                                 port@1 {
1146                                         reg = <1>;
1147                                         merger_in1: endpoint {
1148                                                 remote-endpoint = <&funnel1_out>;
1149                                         };
1150                                 };
1151                         };
1152
1153                         out-ports {
1154                                 port {
1155                                         merger_out: endpoint {
1156                                                 remote-endpoint = <&etf_in>;
1157                                         };
1158                                 };
1159                         };
1160                 };
1161
1162                 funnel@fc31a000 {
1163                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1164                         reg = <0xfc31a000 0x1000>;
1165
1166                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1167                         clock-names = "apb_pclk", "atclk";
1168
1169                         in-ports {
1170                                 #address-cells = <1>;
1171                                 #size-cells = <0>;
1172
1173                                 /*
1174                                  * Not described input ports:
1175                                  * 0 - not-connected
1176                                  * 1 - connected trought funnel to Multimedia CPU
1177                                  * 2 - connected to Wireless CPU
1178                                  * 3 - not-connected
1179                                  * 4 - not-connected
1180                                  * 6 - not-connected
1181                                  * 7 - connected to STM
1182                                  */
1183                                 port@5 {
1184                                         reg = <5>;
1185                                         funnel1_in5: endpoint {
1186                                                 remote-endpoint = <&kpss_out>;
1187                                         };
1188                                 };
1189                         };
1190
1191                         out-ports {
1192                                 port {
1193                                         funnel1_out: endpoint {
1194                                                 remote-endpoint = <&merger_in1>;
1195                                         };
1196                                 };
1197                         };
1198                 };
1199
1200                 funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
1201                         compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1202                         reg = <0xfc345000 0x1000>;
1203
1204                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1205                         clock-names = "apb_pclk", "atclk";
1206
1207                         in-ports {
1208                                 #address-cells = <1>;
1209                                 #size-cells = <0>;
1210
1211                                 port@0 {
1212                                         reg = <0>;
1213                                         kpss_in0: endpoint {
1214                                                 remote-endpoint = <&etm0_out>;
1215                                         };
1216                                 };
1217                                 port@1 {
1218                                         reg = <1>;
1219                                         kpss_in1: endpoint {
1220                                                 remote-endpoint = <&etm1_out>;
1221                                         };
1222                                 };
1223                                 port@2 {
1224                                         reg = <2>;
1225                                         kpss_in2: endpoint {
1226                                                 remote-endpoint = <&etm2_out>;
1227                                         };
1228                                 };
1229                                 port@3 {
1230                                         reg = <3>;
1231                                         kpss_in3: endpoint {
1232                                                 remote-endpoint = <&etm3_out>;
1233                                         };
1234                                 };
1235                         };
1236
1237                         out-ports {
1238                                 port {
1239                                         kpss_out: endpoint {
1240                                                 remote-endpoint = <&funnel1_in5>;
1241                                         };
1242                                 };
1243                         };
1244                 };
1245
1246                 etm@fc33c000 {
1247                         compatible = "arm,coresight-etm4x", "arm,primecell";
1248                         reg = <0xfc33c000 0x1000>;
1249
1250                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1251                         clock-names = "apb_pclk", "atclk";
1252
1253                         cpu = <&CPU0>;
1254
1255                         out-ports {
1256                                 port {
1257                                         etm0_out: endpoint {
1258                                                 remote-endpoint = <&kpss_in0>;
1259                                         };
1260                                 };
1261                         };
1262                 };
1263
1264                 etm@fc33d000 {
1265                         compatible = "arm,coresight-etm4x", "arm,primecell";
1266                         reg = <0xfc33d000 0x1000>;
1267
1268                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1269                         clock-names = "apb_pclk", "atclk";
1270
1271                         cpu = <&CPU1>;
1272
1273                         out-ports {
1274                                 port {
1275                                         etm1_out: endpoint {
1276                                                 remote-endpoint = <&kpss_in1>;
1277                                         };
1278                                 };
1279                         };
1280                 };
1281
1282                 etm@fc33e000 {
1283                         compatible = "arm,coresight-etm4x", "arm,primecell";
1284                         reg = <0xfc33e000 0x1000>;
1285
1286                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1287                         clock-names = "apb_pclk", "atclk";
1288
1289                         cpu = <&CPU2>;
1290
1291                         out-ports {
1292                                 port {
1293                                         etm2_out: endpoint {
1294                                                 remote-endpoint = <&kpss_in2>;
1295                                         };
1296                                 };
1297                         };
1298                 };
1299
1300                 etm@fc33f000 {
1301                         compatible = "arm,coresight-etm4x", "arm,primecell";
1302                         reg = <0xfc33f000 0x1000>;
1303
1304                         clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1305                         clock-names = "apb_pclk", "atclk";
1306
1307                         cpu = <&CPU3>;
1308
1309                         out-ports {
1310                                 port {
1311                                         etm3_out: endpoint {
1312                                                 remote-endpoint = <&kpss_in3>;
1313                                         };
1314                                 };
1315                         };
1316                 };
1317
1318                 ocmem@fdd00000 {
1319                         compatible = "qcom,msm8974-ocmem";
1320                         reg = <0xfdd00000 0x2000>,
1321                               <0xfec00000 0x180000>;
1322                         reg-names = "ctrl",
1323                                     "mem";
1324                         clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1325                                  <&mmcc OCMEMCX_OCMEMNOC_CLK>;
1326                         clock-names = "core",
1327                                       "iface";
1328
1329                         #address-cells = <1>;
1330                         #size-cells = <1>;
1331
1332                         gmu_sram: gmu-sram@0 {
1333                                 reg = <0x0 0x100000>;
1334                         };
1335                 };
1336
1337                 bimc: interconnect@fc380000 {
1338                         reg = <0xfc380000 0x6a000>;
1339                         compatible = "qcom,msm8974-bimc";
1340                         #interconnect-cells = <1>;
1341                         clock-names = "bus", "bus_a";
1342                         clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
1343                                  <&rpmcc RPM_SMD_BIMC_A_CLK>;
1344                 };
1345
1346                 snoc: interconnect@fc460000 {
1347                         reg = <0xfc460000 0x4000>;
1348                         compatible = "qcom,msm8974-snoc";
1349                         #interconnect-cells = <1>;
1350                         clock-names = "bus", "bus_a";
1351                         clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
1352                                  <&rpmcc RPM_SMD_SNOC_A_CLK>;
1353                 };
1354
1355                 pnoc: interconnect@fc468000 {
1356                         reg = <0xfc468000 0x4000>;
1357                         compatible = "qcom,msm8974-pnoc";
1358                         #interconnect-cells = <1>;
1359                         clock-names = "bus", "bus_a";
1360                         clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
1361                                  <&rpmcc RPM_SMD_PNOC_A_CLK>;
1362                 };
1363
1364                 ocmemnoc: interconnect@fc470000 {
1365                         reg = <0xfc470000 0x4000>;
1366                         compatible = "qcom,msm8974-ocmemnoc";
1367                         #interconnect-cells = <1>;
1368                         clock-names = "bus", "bus_a";
1369                         clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1370                                  <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
1371                 };
1372
1373                 mmssnoc: interconnect@fc478000 {
1374                         reg = <0xfc478000 0x4000>;
1375                         compatible = "qcom,msm8974-mmssnoc";
1376                         #interconnect-cells = <1>;
1377                         clock-names = "bus", "bus_a";
1378                         clocks = <&mmcc MMSS_S0_AXI_CLK>,
1379                                  <&mmcc MMSS_S0_AXI_CLK>;
1380                 };
1381
1382                 cnoc: interconnect@fc480000 {
1383                         reg = <0xfc480000 0x4000>;
1384                         compatible = "qcom,msm8974-cnoc";
1385                         #interconnect-cells = <1>;
1386                         clock-names = "bus", "bus_a";
1387                         clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
1388                                  <&rpmcc RPM_SMD_CNOC_A_CLK>;
1389                 };
1390
1391                 mdss: mdss@fd900000 {
1392                         status = "disabled";
1393
1394                         compatible = "qcom,mdss";
1395                         reg = <0xfd900000 0x100>,
1396                               <0xfd924000 0x1000>;
1397                         reg-names = "mdss_phys",
1398                                     "vbif_phys";
1399
1400                         power-domains = <&mmcc MDSS_GDSC>;
1401
1402                         clocks = <&mmcc MDSS_AHB_CLK>,
1403                                  <&mmcc MDSS_AXI_CLK>,
1404                                  <&mmcc MDSS_VSYNC_CLK>;
1405                         clock-names = "iface",
1406                                       "bus",
1407                                       "vsync";
1408
1409                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1410
1411                         interrupt-controller;
1412                         #interrupt-cells = <1>;
1413
1414                         #address-cells = <1>;
1415                         #size-cells = <1>;
1416                         ranges;
1417
1418                         mdp: mdp@fd900000 {
1419                                 status = "disabled";
1420
1421                                 compatible = "qcom,mdp5";
1422                                 reg = <0xfd900100 0x22000>;
1423                                 reg-names = "mdp_phys";
1424
1425                                 interrupt-parent = <&mdss>;
1426                                 interrupts = <0 0>;
1427
1428                                 clocks = <&mmcc MDSS_AHB_CLK>,
1429                                          <&mmcc MDSS_AXI_CLK>,
1430                                          <&mmcc MDSS_MDP_CLK>,
1431                                          <&mmcc MDSS_VSYNC_CLK>;
1432                                 clock-names = "iface",
1433                                               "bus",
1434                                               "core",
1435                                               "vsync";
1436
1437                                 interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
1438                                 interconnect-names = "mdp0-mem";
1439
1440                                 ports {
1441                                         #address-cells = <1>;
1442                                         #size-cells = <0>;
1443
1444                                         port@0 {
1445                                                 reg = <0>;
1446                                                 mdp5_intf1_out: endpoint {
1447                                                         remote-endpoint = <&dsi0_in>;
1448                                                 };
1449                                         };
1450                                 };
1451                         };
1452
1453                         dsi0: dsi@fd922800 {
1454                                 status = "disabled";
1455
1456                                 compatible = "qcom,mdss-dsi-ctrl";
1457                                 reg = <0xfd922800 0x1f8>;
1458                                 reg-names = "dsi_ctrl";
1459
1460                                 interrupt-parent = <&mdss>;
1461                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
1462
1463                                 assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
1464                                                   <&mmcc PCLK0_CLK_SRC>;
1465                                 assigned-clock-parents = <&dsi_phy0 0>,
1466                                                          <&dsi_phy0 1>;
1467
1468                                 clocks = <&mmcc MDSS_MDP_CLK>,
1469                                          <&mmcc MDSS_AHB_CLK>,
1470                                          <&mmcc MDSS_AXI_CLK>,
1471                                          <&mmcc MDSS_BYTE0_CLK>,
1472                                          <&mmcc MDSS_PCLK0_CLK>,
1473                                          <&mmcc MDSS_ESC0_CLK>,
1474                                          <&mmcc MMSS_MISC_AHB_CLK>;
1475                                 clock-names = "mdp_core",
1476                                               "iface",
1477                                               "bus",
1478                                               "byte",
1479                                               "pixel",
1480                                               "core",
1481                                               "core_mmss";
1482
1483                                 phys = <&dsi_phy0>;
1484                                 phy-names = "dsi-phy";
1485
1486                                 ports {
1487                                         #address-cells = <1>;
1488                                         #size-cells = <0>;
1489
1490                                         port@0 {
1491                                                 reg = <0>;
1492                                                 dsi0_in: endpoint {
1493                                                         remote-endpoint = <&mdp5_intf1_out>;
1494                                                 };
1495                                         };
1496
1497                                         port@1 {
1498                                                 reg = <1>;
1499                                                 dsi0_out: endpoint {
1500                                                 };
1501                                         };
1502                                 };
1503                         };
1504
1505                         dsi_phy0: dsi-phy@fd922a00 {
1506                                 status = "disabled";
1507
1508                                 compatible = "qcom,dsi-phy-28nm-hpm";
1509                                 reg = <0xfd922a00 0xd4>,
1510                                       <0xfd922b00 0x280>,
1511                                       <0xfd922d80 0x30>;
1512                                 reg-names = "dsi_pll",
1513                                             "dsi_phy",
1514                                             "dsi_phy_regulator";
1515
1516                                 #clock-cells = <1>;
1517                                 #phy-cells = <0>;
1518                                 qcom,dsi-phy-index = <0>;
1519
1520                                 clocks = <&mmcc MDSS_AHB_CLK>;
1521                                 clock-names = "iface";
1522                         };
1523                 };
1524
1525                 imem@fe805000 {
1526                         status = "disabled";
1527                         compatible = "syscon", "simple-mfd";
1528                         reg = <0xfe805000 0x1000>;
1529
1530                         reboot-mode {
1531                                 compatible = "syscon-reboot-mode";
1532                                 offset = <0x65c>;
1533                         };
1534                 };
1535         };
1536
1537         smd {
1538                 compatible = "qcom,smd";
1539
1540                 rpm {
1541                         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
1542                         qcom,ipc = <&apcs 8 0>;
1543                         qcom,smd-edge = <15>;
1544
1545                         rpm_requests {
1546                                 compatible = "qcom,rpm-msm8974";
1547                                 qcom,smd-channels = "rpm_requests";
1548
1549                                 rpmcc: clock-controller {
1550                                         compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
1551                                         #clock-cells = <1>;
1552                                 };
1553
1554                                 pm8841-regulators {
1555                                         compatible = "qcom,rpm-pm8841-regulators";
1556
1557                                         pm8841_s1: s1 {};
1558                                         pm8841_s2: s2 {};
1559                                         pm8841_s3: s3 {};
1560                                         pm8841_s4: s4 {};
1561                                         pm8841_s5: s5 {};
1562                                         pm8841_s6: s6 {};
1563                                         pm8841_s7: s7 {};
1564                                         pm8841_s8: s8 {};
1565                                 };
1566
1567                                 pm8941-regulators {
1568                                         compatible = "qcom,rpm-pm8941-regulators";
1569
1570                                         pm8941_s1: s1 {};
1571                                         pm8941_s2: s2 {};
1572                                         pm8941_s3: s3 {};
1573
1574                                         pm8941_l1: l1 {};
1575                                         pm8941_l2: l2 {};
1576                                         pm8941_l3: l3 {};
1577                                         pm8941_l4: l4 {};
1578                                         pm8941_l5: l5 {};
1579                                         pm8941_l6: l6 {};
1580                                         pm8941_l7: l7 {};
1581                                         pm8941_l8: l8 {};
1582                                         pm8941_l9: l9 {};
1583                                         pm8941_l10: l10 {};
1584                                         pm8941_l11: l11 {};
1585                                         pm8941_l12: l12 {};
1586                                         pm8941_l13: l13 {};
1587                                         pm8941_l14: l14 {};
1588                                         pm8941_l15: l15 {};
1589                                         pm8941_l16: l16 {};
1590                                         pm8941_l17: l17 {};
1591                                         pm8941_l18: l18 {};
1592                                         pm8941_l19: l19 {};
1593                                         pm8941_l20: l20 {};
1594                                         pm8941_l21: l21 {};
1595                                         pm8941_l22: l22 {};
1596                                         pm8941_l23: l23 {};
1597                                         pm8941_l24: l24 {};
1598
1599                                         pm8941_lvs1: lvs1 {};
1600                                         pm8941_lvs2: lvs2 {};
1601                                         pm8941_lvs3: lvs3 {};
1602                                 };
1603                         };
1604                 };
1605         };
1606
1607         vreg_boost: vreg-boost {
1608                 compatible = "regulator-fixed";
1609
1610                 regulator-name = "vreg-boost";
1611                 regulator-min-microvolt = <3150000>;
1612                 regulator-max-microvolt = <3150000>;
1613
1614                 regulator-always-on;
1615                 regulator-boot-on;
1616
1617                 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
1618                 enable-active-high;
1619
1620                 pinctrl-names = "default";
1621                 pinctrl-0 = <&boost_bypass_n_pin>;
1622         };
1623         vreg_vph_pwr: vreg-vph-pwr {
1624                 compatible = "regulator-fixed";
1625                 regulator-name = "vph-pwr";
1626
1627                 regulator-min-microvolt = <3600000>;
1628                 regulator-max-microvolt = <3600000>;
1629
1630                 regulator-always-on;
1631         };
1632 };