arch/arm/boot/dts/qcom-ipq4019.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15
  16         model = "Qualcomm Technologies, Inc. IPQ4019";
  17         compatible = "qcom,ipq4019";
  18         interrupt-parent = <&intc>;
  19
  20         reserved-memory {
  21                 #address-cells = <0x1>;
  22                 #size-cells = <0x1>;
  23                 ranges;
  24
  25                 smem_region: smem@87e00000 {
  26                         reg = <0x87e00000 0x080000>;
  27                         no-map;
  28                 };
  29
  30                 tz@87e80000 {
  31                         reg = <0x87e80000 0x180000>;
  32                         no-map;
  33                 };
  34         };
  35
  36         aliases {
  37                 spi0 = &blsp1_spi1;
  38                 spi1 = &blsp1_spi2;
  39                 i2c0 = &blsp1_i2c3;
  40                 i2c1 = &blsp1_i2c4;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 cpu@0 {
  47                         device_type = "cpu";
  48                         compatible = "arm,cortex-a7";
  49                         enable-method = "qcom,kpss-acc-v2";
  50                         next-level-cache = <&L2>;
  51                         qcom,acc = <&acc0>;
  52                         qcom,saw = <&saw0>;
  53                         reg = <0x0>;
  54                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  55                         clock-frequency = <0>;
  56                         clock-latency = <256000>;
  57                         operating-points-v2 = <&cpu0_opp_table>;
  58                 };
  59
  60                 cpu@1 {
  61                         device_type = "cpu";
  62                         compatible = "arm,cortex-a7";
  63                         enable-method = "qcom,kpss-acc-v2";
  64                         next-level-cache = <&L2>;
  65                         qcom,acc = <&acc1>;
  66                         qcom,saw = <&saw1>;
  67                         reg = <0x1>;
  68                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  69                         clock-frequency = <0>;
  70                         clock-latency = <256000>;
  71                         operating-points-v2 = <&cpu0_opp_table>;
  72                 };
  73
  74                 cpu@2 {
  75                         device_type = "cpu";
  76                         compatible = "arm,cortex-a7";
  77                         enable-method = "qcom,kpss-acc-v2";
  78                         next-level-cache = <&L2>;
  79                         qcom,acc = <&acc2>;
  80                         qcom,saw = <&saw2>;
  81                         reg = <0x2>;
  82                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  83                         clock-frequency = <0>;
  84                         clock-latency = <256000>;
  85                         operating-points-v2 = <&cpu0_opp_table>;
  86                 };
  87
  88                 cpu@3 {
  89                         device_type = "cpu";
  90                         compatible = "arm,cortex-a7";
  91                         enable-method = "qcom,kpss-acc-v2";
  92                         next-level-cache = <&L2>;
  93                         qcom,acc = <&acc3>;
  94                         qcom,saw = <&saw3>;
  95                         reg = <0x3>;
  96                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  97                         clock-frequency = <0>;
  98                         clock-latency = <256000>;
  99                         operating-points-v2 = <&cpu0_opp_table>;
 100                 };
 101
 102                 L2: l2-cache {
 103                         compatible = "cache";
 104                         cache-level = <2>;
 105                         qcom,saw = <&saw_l2>;
 106                 };
 107         };
 108
 109         cpu0_opp_table: opp_table0 {
 110                 compatible = "operating-points-v2";
 111                 opp-shared;
 112
 113                 opp-48000000 {
 114                         opp-hz = /bits/ 64 <48000000>;
 115                         clock-latency-ns = <256000>;
 116                 };
 117                 opp-200000000 {
 118                         opp-hz = /bits/ 64 <200000000>;
 119                         clock-latency-ns = <256000>;
 120                 };
 121                 opp-500000000 {
 122                         opp-hz = /bits/ 64 <500000000>;
 123                         clock-latency-ns = <256000>;
 124                 };
 125                 opp-716000000 {
 126                         opp-hz = /bits/ 64 <716000000>;
 127                         clock-latency-ns = <256000>;
 128                 };
 129         };
 130
 131         memory {
 132                 device_type = "memory";
 133                 reg = <0x0 0x0>;
 134         };
 135
 136         pmu {
 137                 compatible = "arm,cortex-a7-pmu";
 138                 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
 139                                          IRQ_TYPE_LEVEL_HIGH)>;
 140         };
 141
 142         clocks {
 143                 sleep_clk: sleep_clk {
 144                         compatible = "fixed-clock";
 145                         clock-frequency = <32768>;
 146                         #clock-cells = <0>;
 147                 };
 148
 149                 xo: xo {
 150                         compatible = "fixed-clock";
 151                         clock-frequency = <48000000>;
 152                         #clock-cells = <0>;
 153                 };
 154         };
 155
 156         firmware {
 157                 scm {
 158                         compatible = "qcom,scm-ipq4019";
 159                 };
 160         };
 161
 162         timer {
 163                 compatible = "arm,armv7-timer";
 164                 interrupts = <1 2 0xf08>,
 165                              <1 3 0xf08>,
 166                              <1 4 0xf08>,
 167                              <1 1 0xf08>;
 168                 clock-frequency = <48000000>;
 169                 always-on;
 170         };
 171
 172         soc {
 173                 #address-cells = <1>;
 174                 #size-cells = <1>;
 175                 ranges;
 176                 compatible = "simple-bus";
 177
 178                 intc: interrupt-controller@b000000 {
 179                         compatible = "qcom,msm-qgic2";
 180                         interrupt-controller;
 181                         #interrupt-cells = <3>;
 182                         reg = <0x0b000000 0x1000>,
 183                         <0x0b002000 0x1000>;
 184                 };
 185
 186                 gcc: clock-controller@1800000 {
 187                         compatible = "qcom,gcc-ipq4019";
 188                         #clock-cells = <1>;
 189                         #reset-cells = <1>;
 190                         reg = <0x1800000 0x60000>;
 191                 };
 192
 193                 prng: rng@22000 {
 194                         compatible = "qcom,prng";
 195                         reg = <0x22000 0x140>;
 196                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 197                         clock-names = "core";
 198                         status = "disabled";
 199                 };
 200
 201                 tlmm: pinctrl@1000000 {
 202                         compatible = "qcom,ipq4019-pinctrl";
 203                         reg = <0x01000000 0x300000>;
 204                         gpio-controller;
 205                         gpio-ranges = <&tlmm 0 0 100>;
 206                         #gpio-cells = <2>;
 207                         interrupt-controller;
 208                         #interrupt-cells = <2>;
 209                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 210                 };
 211
 212                 vqmmc: regulator@1948000 {
 213                         compatible = "qcom,vqmmc-ipq4019-regulator";
 214                         reg = <0x01948000 0x4>;
 215                         regulator-name = "vqmmc";
 216                         regulator-min-microvolt = <1500000>;
 217                         regulator-max-microvolt = <3000000>;
 218                         regulator-always-on;
 219                         status = "disabled";
 220                 };
 221
 222                 sdhci: sdhci@7824900 {
 223                         compatible = "qcom,sdhci-msm-v4";
 224                         reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 225                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 226                         interrupt-names = "hc_irq", "pwr_irq";
 227                         bus-width = <8>;
 228                         clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
 229                                  <&gcc GCC_DCD_XO_CLK>;
 230                         clock-names = "core", "iface", "xo";
 231                         status = "disabled";
 232                 };
 233
 234                 blsp_dma: dma@7884000 {
 235                         compatible = "qcom,bam-v1.7.0";
 236                         reg = <0x07884000 0x23000>;
 237                         interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 238                         clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 239                         clock-names = "bam_clk";
 240                         #dma-cells = <1>;
 241                         qcom,ee = <0>;
 242                         status = "disabled";
 243                 };
 244
 245                 blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
 246                         compatible = "qcom,spi-qup-v2.2.1";
 247                         reg = <0x78b5000 0x600>;
 248                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 249                         clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 250                                  <&gcc GCC_BLSP1_AHB_CLK>;
 251                         clock-names = "core", "iface";
 252                         #address-cells = <1>;
 253                         #size-cells = <0>;
 254                         dmas = <&blsp_dma 5>, <&blsp_dma 4>;
 255                         dma-names = "rx", "tx";
 256                         status = "disabled";
 257                 };
 258
 259                 blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
 260                         compatible = "qcom,spi-qup-v2.2.1";
 261                         reg = <0x78b6000 0x600>;
 262                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 263                         clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
 264                                 <&gcc GCC_BLSP1_AHB_CLK>;
 265                         clock-names = "core", "iface";
 266                         #address-cells = <1>;
 267                         #size-cells = <0>;
 268                         dmas = <&blsp_dma 7>, <&blsp_dma 6>;
 269                         dma-names = "rx", "tx";
 270                         status = "disabled";
 271                 };
 272
 273                 blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
 274                         compatible = "qcom,i2c-qup-v2.2.1";
 275                         reg = <0x78b7000 0x600>;
 276                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 277                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 278                                  <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
 279                         clock-names = "iface", "core";
 280                         #address-cells = <1>;
 281                         #size-cells = <0>;
 282                         dmas = <&blsp_dma 9>, <&blsp_dma 8>;
 283                         dma-names = "rx", "tx";
 284                         status = "disabled";
 285                 };
 286
 287                 blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
 288                         compatible = "qcom,i2c-qup-v2.2.1";
 289                         reg = <0x78b8000 0x600>;
 290                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 291                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 292                                  <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 293                         clock-names = "iface", "core";
 294                         #address-cells = <1>;
 295                         #size-cells = <0>;
 296                         dmas = <&blsp_dma 11>, <&blsp_dma 10>;
 297                         dma-names = "rx", "tx";
 298                         status = "disabled";
 299                 };
 300
 301                 cryptobam: dma@8e04000 {
 302                         compatible = "qcom,bam-v1.7.0";
 303                         reg = <0x08e04000 0x20000>;
 304                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 305                         clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
 306                         clock-names = "bam_clk";
 307                         #dma-cells = <1>;
 308                         qcom,ee = <1>;
 309                         qcom,controlled-remotely;
 310                         status = "disabled";
 311                 };
 312
 313                 crypto: crypto@8e3a000 {
 314                         compatible = "qcom,crypto-v5.1";
 315                         reg = <0x08e3a000 0x6000>;
 316                         clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 317                                  <&gcc GCC_CRYPTO_AXI_CLK>,
 318                                  <&gcc GCC_CRYPTO_CLK>;
 319                         clock-names = "iface", "bus", "core";
 320                         dmas = <&cryptobam 2>, <&cryptobam 3>;
 321                         dma-names = "rx", "tx";
 322                         status = "disabled";
 323                 };
 324
 325                 acc0: clock-controller@b088000 {
 326                         compatible = "qcom,kpss-acc-v2";
 327                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
 328                 };
 329
 330                 acc1: clock-controller@b098000 {
 331                         compatible = "qcom,kpss-acc-v2";
 332                         reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
 333                 };
 334
 335                 acc2: clock-controller@b0a8000 {
 336                         compatible = "qcom,kpss-acc-v2";
 337                         reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
 338                 };
 339
 340                 acc3: clock-controller@b0b8000 {
 341                         compatible = "qcom,kpss-acc-v2";
 342                         reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 343                 };
 344
 345                 saw0: regulator@b089000 {
 346                         compatible = "qcom,saw2";
 347                         reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
 348                         regulator;
 349                 };
 350
 351                 saw1: regulator@b099000 {
 352                         compatible = "qcom,saw2";
 353                         reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
 354                         regulator;
 355                 };
 356
 357                 saw2: regulator@b0a9000 {
 358                         compatible = "qcom,saw2";
 359                         reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
 360                         regulator;
 361                 };
 362
 363                 saw3: regulator@b0b9000 {
 364                         compatible = "qcom,saw2";
 365                         reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
 366                         regulator;
 367                 };
 368
 369                 saw_l2: regulator@b012000 {
 370                         compatible = "qcom,saw2";
 371                         reg = <0xb012000 0x1000>;
 372                         regulator;
 373                 };
 374
 375                 blsp1_uart1: serial@78af000 {
 376                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 377                         reg = <0x78af000 0x200>;
 378                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 379                         status = "disabled";
 380                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 381                                 <&gcc GCC_BLSP1_AHB_CLK>;
 382                         clock-names = "core", "iface";
 383                         dmas = <&blsp_dma 1>, <&blsp_dma 0>;
 384                         dma-names = "rx", "tx";
 385                 };
 386
 387                 blsp1_uart2: serial@78b0000 {
 388                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 389                         reg = <0x78b0000 0x200>;
 390                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 391                         status = "disabled";
 392                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 393                                 <&gcc GCC_BLSP1_AHB_CLK>;
 394                         clock-names = "core", "iface";
 395                         dmas = <&blsp_dma 3>, <&blsp_dma 2>;
 396                         dma-names = "rx", "tx";
 397                 };
 398
 399                 watchdog: watchdog@b017000 {
 400                         compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
 401                         reg = <0xb017000 0x40>;
 402                         clocks = <&sleep_clk>;
 403                         timeout-sec = <10>;
 404                         status = "disabled";
 405                 };
 406
 407                 restart@4ab000 {
 408                         compatible = "qcom,pshold";
 409                         reg = <0x4ab000 0x4>;
 410                 };
 411
 412                 pcie0: pci@40000000 {
 413                         compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
 414                         reg =  <0x40000000 0xf1d
 415                                 0x40000f20 0xa8
 416                                 0x80000 0x2000
 417                                 0x40100000 0x1000>;
 418                         reg-names = "dbi", "elbi", "parf", "config";
 419                         device_type = "pci";
 420                         linux,pci-domain = <0>;
 421                         bus-range = <0x00 0xff>;
 422                         num-lanes = <1>;
 423                         #address-cells = <3>;
 424                         #size-cells = <2>;
 425
 426                         ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
 427                                  <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
 428
 429                         interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 430                         interrupt-names = "msi";
 431                         #interrupt-cells = <1>;
 432                         interrupt-map-mask = <0 0 0 0x7>;
 433                         interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 434                                         <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 435                                         <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 436                                         <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 437                         clocks = <&gcc GCC_PCIE_AHB_CLK>,
 438                                  <&gcc GCC_PCIE_AXI_M_CLK>,
 439                                  <&gcc GCC_PCIE_AXI_S_CLK>;
 440                         clock-names = "aux",
 441                                       "master_bus",
 442                                       "slave_bus";
 443
 444                         resets = <&gcc PCIE_AXI_M_ARES>,
 445                                  <&gcc PCIE_AXI_S_ARES>,
 446                                  <&gcc PCIE_PIPE_ARES>,
 447                                  <&gcc PCIE_AXI_M_VMIDMT_ARES>,
 448                                  <&gcc PCIE_AXI_S_XPU_ARES>,
 449                                  <&gcc PCIE_PARF_XPU_ARES>,
 450                                  <&gcc PCIE_PHY_ARES>,
 451                                  <&gcc PCIE_AXI_M_STICKY_ARES>,
 452                                  <&gcc PCIE_PIPE_STICKY_ARES>,
 453                                  <&gcc PCIE_PWR_ARES>,
 454                                  <&gcc PCIE_AHB_ARES>,
 455                                  <&gcc PCIE_PHY_AHB_ARES>;
 456                         reset-names = "axi_m",
 457                                       "axi_s",
 458                                       "pipe",
 459                                       "axi_m_vmid",
 460                                       "axi_s_xpu",
 461                                       "parf",
 462                                       "phy",
 463                                       "axi_m_sticky",
 464                                       "pipe_sticky",
 465                                       "pwr",
 466                                       "ahb",
 467                                       "phy_ahb";
 468
 469                         status = "disabled";
 470                 };
 471
 472                 qpic_bam: dma@7984000 {
 473                         compatible = "qcom,bam-v1.7.0";
 474                         reg = <0x7984000 0x1a000>;
 475                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 476                         clocks = <&gcc GCC_QPIC_CLK>;
 477                         clock-names = "bam_clk";
 478                         #dma-cells = <1>;
 479                         qcom,ee = <0>;
 480                         status = "disabled";
 481                 };
 482
 483                 nand: nand-controller@79b0000 {
 484                         compatible = "qcom,ipq4019-nand";
 485                         reg = <0x79b0000 0x1000>;
 486                         #address-cells = <1>;
 487                         #size-cells = <0>;
 488                         clocks = <&gcc GCC_QPIC_CLK>,
 489                                  <&gcc GCC_QPIC_AHB_CLK>;
 490                         clock-names = "core", "aon";
 491
 492                         dmas = <&qpic_bam 0>,
 493                                <&qpic_bam 1>,
 494                                <&qpic_bam 2>;
 495                         dma-names = "tx", "rx", "cmd";
 496                         status = "disabled";
 497
 498                         nand@0 {
 499                                 reg = <0>;
 500
 501                                 nand-ecc-strength = <4>;
 502                                 nand-ecc-step-size = <512>;
 503                                 nand-bus-width = <8>;
 504                         };
 505                 };
 506
 507                 wifi0: wifi@a000000 {
 508                         compatible = "qcom,ipq4019-wifi";
 509                         reg = <0xa000000 0x200000>;
 510                         resets = <&gcc WIFI0_CPU_INIT_RESET>,
 511                                  <&gcc WIFI0_RADIO_SRIF_RESET>,
 512                                  <&gcc WIFI0_RADIO_WARM_RESET>,
 513                                  <&gcc WIFI0_RADIO_COLD_RESET>,
 514                                  <&gcc WIFI0_CORE_WARM_RESET>,
 515                                  <&gcc WIFI0_CORE_COLD_RESET>;
 516                         reset-names = "wifi_cpu_init", "wifi_radio_srif",
 517                                       "wifi_radio_warm", "wifi_radio_cold",
 518                                       "wifi_core_warm", "wifi_core_cold";
 519                         clocks = <&gcc GCC_WCSS2G_CLK>,
 520                                  <&gcc GCC_WCSS2G_REF_CLK>,
 521                                  <&gcc GCC_WCSS2G_RTC_CLK>;
 522                         clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
 523                                       "wifi_wcss_rtc";
 524                         interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
 525                                      <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
 526                                      <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
 527                                      <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
 528                                      <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
 529                                      <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
 530                                      <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
 531                                      <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
 532                                      <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
 533                                      <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
 534                                      <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
 535                                      <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
 536                                      <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
 537                                      <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
 538                                      <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
 539                                      <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
 540                                      <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 541                         interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
 542                                            "msi4",  "msi5",  "msi6",  "msi7",
 543                                            "msi8",  "msi9", "msi10", "msi11",
 544                                           "msi12", "msi13", "msi14", "msi15",
 545                                           "legacy";
 546                         status = "disabled";
 547                 };
 548
 549                 wifi1: wifi@a800000 {
 550                         compatible = "qcom,ipq4019-wifi";
 551                         reg = <0xa800000 0x200000>;
 552                         resets = <&gcc WIFI1_CPU_INIT_RESET>,
 553                                  <&gcc WIFI1_RADIO_SRIF_RESET>,
 554                                  <&gcc WIFI1_RADIO_WARM_RESET>,
 555                                  <&gcc WIFI1_RADIO_COLD_RESET>,
 556                                  <&gcc WIFI1_CORE_WARM_RESET>,
 557                                  <&gcc WIFI1_CORE_COLD_RESET>;
 558                         reset-names = "wifi_cpu_init", "wifi_radio_srif",
 559                                       "wifi_radio_warm", "wifi_radio_cold",
 560                                       "wifi_core_warm", "wifi_core_cold";
 561                         clocks = <&gcc GCC_WCSS5G_CLK>,
 562                                  <&gcc GCC_WCSS5G_REF_CLK>,
 563                                  <&gcc GCC_WCSS5G_RTC_CLK>;
 564                         clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
 565                                       "wifi_wcss_rtc";
 566                         interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
 567                                      <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
 568                                      <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
 569                                      <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
 570                                      <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
 571                                      <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
 572                                      <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
 573                                      <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
 574                                      <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
 575                                      <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
 576                                      <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
 577                                      <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
 578                                      <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
 579                                      <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
 580                                      <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
 581                                      <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
 582                                      <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 583                         interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
 584                                            "msi4",  "msi5",  "msi6",  "msi7",
 585                                            "msi8",  "msi9", "msi10", "msi11",
 586                                           "msi12", "msi13", "msi14", "msi15",
 587                                           "legacy";
 588                         status = "disabled";
 589                 };
 590
 591                 mdio: mdio@90000 {
 592                         #address-cells = <1>;
 593                         #size-cells = <0>;
 594                         compatible = "qcom,ipq4019-mdio";
 595                         reg = <0x90000 0x64>;
 596                         status = "disabled";
 597
 598                         ethphy0: ethernet-phy@0 {
 599                                 reg = <0>;
 600                         };
 601
 602                         ethphy1: ethernet-phy@1 {
 603                                 reg = <1>;
 604                         };
 605
 606                         ethphy2: ethernet-phy@2 {
 607                                 reg = <2>;
 608                         };
 609
 610                         ethphy3: ethernet-phy@3 {
 611                                 reg = <3>;
 612                         };
 613
 614                         ethphy4: ethernet-phy@4 {
 615                                 reg = <4>;
 616                         };
 617                 };
 618
 619                 usb3_ss_phy: ssphy@9a000 {
 620                         compatible = "qcom,usb-ss-ipq4019-phy";
 621                         #phy-cells = <0>;
 622                         reg = <0x9a000 0x800>;
 623                         reg-names = "phy_base";
 624                         resets = <&gcc USB3_UNIPHY_PHY_ARES>;
 625                         reset-names = "por_rst";
 626                         status = "disabled";
 627                 };
 628
 629                 usb3_hs_phy: hsphy@a6000 {
 630                         compatible = "qcom,usb-hs-ipq4019-phy";
 631                         #phy-cells = <0>;
 632                         reg = <0xa6000 0x40>;
 633                         reg-names = "phy_base";
 634                         resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
 635                         reset-names = "por_rst", "srif_rst";
 636                         status = "disabled";
 637                 };
 638
 639                 usb3: usb3@8af8800 {
 640                         compatible = "qcom,dwc3";
 641                         reg = <0x8af8800 0x100>;
 642                         #address-cells = <1>;
 643                         #size-cells = <1>;
 644                         clocks = <&gcc GCC_USB3_MASTER_CLK>,
 645                                  <&gcc GCC_USB3_SLEEP_CLK>,
 646                                  <&gcc GCC_USB3_MOCK_UTMI_CLK>;
 647                         clock-names = "master", "sleep", "mock_utmi";
 648                         ranges;
 649                         status = "disabled";
 650
 651                         dwc3@8a00000 {
 652                                 compatible = "snps,dwc3";
 653                                 reg = <0x8a00000 0xf8000>;
 654                                 interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 655                                 phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
 656                                 phy-names = "usb2-phy", "usb3-phy";
 657                                 dr_mode = "host";
 658                         };
 659                 };
 660
 661                 usb2_hs_phy: hsphy@a8000 {
 662                         compatible = "qcom,usb-hs-ipq4019-phy";
 663                         #phy-cells = <0>;
 664                         reg = <0xa8000 0x40>;
 665                         reg-names = "phy_base";
 666                         resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
 667                         reset-names = "por_rst", "srif_rst";
 668                         status = "disabled";
 669                 };
 670
 671                 usb2: usb2@60f8800 {
 672                         compatible = "qcom,dwc3";
 673                         reg = <0x60f8800 0x100>;
 674                         #address-cells = <1>;
 675                         #size-cells = <1>;
 676                         clocks = <&gcc GCC_USB2_MASTER_CLK>,
 677                                  <&gcc GCC_USB2_SLEEP_CLK>,
 678                                  <&gcc GCC_USB2_MOCK_UTMI_CLK>;
 679                         clock-names = "master", "sleep", "mock_utmi";
 680                         ranges;
 681                         status = "disabled";
 682
 683                         dwc3@6000000 {
 684                                 compatible = "snps,dwc3";
 685                                 reg = <0x6000000 0xf8000>;
 686                                 interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 687                                 phys = <&usb2_hs_phy>;
 688                                 phy-names = "usb2-phy";
 689                                 dr_mode = "host";
 690                         };
 691                 };
 692         };
 693 };