arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 // Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
   3
   4 #include "qcom-ipq4019.dtsi"
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "8devices Jalapeno";
  10         compatible = "8dev,jalapeno";
  11 };
  12
  13 &tlmm {
  14         mdio_pins: mdio_pinmux {
  15                 pinmux_1 {
  16                         pins = "gpio53";
  17                         function = "mdio";
  18                 };
  19
  20                 pinmux_2 {
  21                         pins = "gpio52";
  22                         function = "mdc";
  23                 };
  24
  25                 pinconf {
  26                         pins = "gpio52", "gpio53";
  27                         bias-pull-up;
  28                 };
  29         };
  30
  31         serial_pins: serial_pinmux {
  32                 mux {
  33                         pins = "gpio60", "gpio61";
  34                         function = "blsp_uart0";
  35                         bias-disable;
  36                 };
  37         };
  38
  39         spi_0_pins: spi_0_pinmux {
  40                 pin {
  41                         function = "blsp_spi0";
  42                         pins = "gpio55", "gpio56", "gpio57";
  43                         drive-strength = <2>;
  44                         bias-disable;
  45                 };
  46
  47                 pin_cs {
  48                         function = "gpio";
  49                         pins = "gpio54", "gpio59";
  50                         drive-strength = <2>;
  51                         bias-disable;
  52                         output-high;
  53                 };
  54         };
  55 };
  56
  57 &watchdog {
  58         status = "okay";
  59 };
  60
  61 &prng {
  62         status = "okay";
  63 };
  64
  65 &blsp_dma {
  66         status = "okay";
  67 };
  68
  69 &blsp1_spi1 {
  70         status = "okay";
  71
  72         pinctrl-0 = <&spi_0_pins>;
  73         pinctrl-names = "default";
  74         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
  75
  76         flash@0 {
  77                 status = "okay";
  78
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <24000000>;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 label = "SBL1";
  90                                 reg = <0x00000000 0x00040000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@40000 {
  95                                 label = "MIBIB";
  96                                 reg = <0x00040000 0x00020000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@60000 {
 101                                 label = "QSEE";
 102                                 reg = <0x00060000 0x00060000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@c0000 {
 107                                 label = "CDT";
 108                                 reg = <0x000c0000 0x00010000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@d0000 {
 113                                 label = "DDRPARAMS";
 114                                 reg = <0x000d0000 0x00010000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@e0000 {
 119                                 label = "u-boot-env";
 120                                 reg = <0x000e0000 0x00010000>;
 121                         };
 122
 123                         partition@f0000 {
 124                                 label = "u-boot";
 125                                 reg = <0x000f0000 0x00080000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@170000 {
 130                                 label = "ART";
 131                                 reg = <0x00170000 0x00010000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136
 137         spi-nand@1 {
 138                 status = "okay";
 139
 140                 compatible = "spi-nand";
 141                 reg = <1>;
 142                 spi-max-frequency = <24000000>;
 143
 144                 partitions {
 145                         compatible = "fixed-partitions";
 146                         #address-cells = <1>;
 147                         #size-cells = <1>;
 148
 149                         partition@0 {
 150                                 label = "ubi1";
 151                                 reg = <0x00000000 0x04000000>;
 152                         };
 153
 154                         partition@4000000 {
 155                                 label = "ubi2";
 156                                 reg = <0x04000000 0x04000000>;
 157                         };
 158                 };
 159         };
 160 };
 161
 162 &blsp1_uart1 {
 163         status = "okay";
 164
 165         pinctrl-0 = <&serial_pins>;
 166         pinctrl-names = "default";
 167 };
 168
 169 &cryptobam {
 170         status = "okay";
 171 };
 172
 173 &crypto {
 174         status = "okay";
 175 };
 176
 177 &mdio {
 178         status = "okay";
 179
 180         pinctrl-0 = <&mdio_pins>;
 181         pinctrl-names = "default";
 182 };
 183
 184 &wifi0 {
 185         status = "okay";
 186
 187         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 188 };
 189
 190 &wifi1 {
 191         status = "okay";
 192
 193         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 194 };
 195
 196 &usb3_ss_phy {
 197         status = "okay";
 198 };
 199
 200 &usb3_hs_phy {
 201         status = "okay";
 202 };
 203
 204 &usb3 {
 205         status = "okay";
 206 };
 207
 208 &usb2_hs_phy {
 209         status = "okay";
 210 };
 211
 212 &usb2 {
 213         status = "okay";
 214 };