2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
21 vmain: fixedregulator-vmain {
22 compatible = "regulator-fixed";
23 regulator-name = "vmain";
24 regulator-min-microvolt = <5000000>;
25 regulator-max-microvolt = <5000000>;
28 vsys_cobra: fixedregulator-vsys_cobra {
29 compatible = "regulator-fixed";
30 regulator-name = "vsys_cobra";
31 vin-supply = <&vmain>;
32 regulator-min-microvolt = <5000000>;
33 regulator-max-microvolt = <5000000>;
36 vdds_1v8_main: fixedregulator-vdds_1v8_main {
37 compatible = "regulator-fixed";
38 regulator-name = "vdds_1v8_main";
39 vin-supply = <&smps7_reg>;
40 regulator-min-microvolt = <1800000>;
41 regulator-max-microvolt = <1800000>;
44 vmmcsd_fixed: fixedregulator-mmcsd {
45 compatible = "regulator-fixed";
46 regulator-name = "vmmcsd_fixed";
47 regulator-min-microvolt = <3000000>;
48 regulator-max-microvolt = <3000000>;
51 mmc3_pwrseq: sdhci0_pwrseq {
52 compatible = "mmc-pwrseq-simple";
53 clocks = <&clk32kgaudio>;
54 clock-names = "ext_clock";
57 vmmcsdio_fixed: fixedregulator-mmcsdio {
58 compatible = "regulator-fixed";
59 regulator-name = "vmmcsdio_fixed";
60 regulator-min-microvolt = <1800000>;
61 regulator-max-microvolt = <1800000>;
62 gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */
64 startup-delay-us = <70000>;
65 pinctrl-names = "default";
66 pinctrl-0 = <&wlan_pins>;
69 /* HS USB Host PHY on PORT 2 */
70 hsusb2_phy: hsusb2_phy {
71 compatible = "usb-nop-xceiv";
72 reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
73 clocks = <&auxclk1_ck>;
74 clock-names = "main_clk";
75 clock-frequency = <19200000>;
78 /* HS USB Host PHY on PORT 3 */
79 hsusb3_phy: hsusb3_phy {
80 compatible = "usb-nop-xceiv";
81 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
85 compatible = "ti,tpd12s015";
87 pinctrl-names = "default";
88 pinctrl-0 = <&tpd12s015_pins>;
90 /* gpios defined in the board specific dts */
99 tpd12s015_in: endpoint {
100 remote-endpoint = <&hdmi_out>;
107 tpd12s015_out: endpoint {
108 remote-endpoint = <&hdmi_connector_in>;
115 compatible = "hdmi-connector";
121 hdmi_connector_in: endpoint {
122 remote-endpoint = <&tpd12s015_out>;
128 compatible = "ti,abe-twl6040";
129 ti,model = "omap5-uevm";
132 ti,mclk-freq = <19200000>;
136 ti,twl6040 = <&twl6040>;
140 "Headset Stereophone", "HSOL",
141 "Headset Stereophone", "HSOR",
144 "HSMIC", "Headset Mic",
145 "Headset Mic", "Headset Mic Bias",
152 /* TI trees use GPIO instead of msecure, see also muxing */
155 gpios = <10 GPIO_ACTIVE_HIGH>;
157 line-name = "gpio8_234/msecure";
162 pinctrl-names = "default";
168 twl6040_pins: pinmux_twl6040_pins {
169 pinctrl-single,pins = <
170 OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
174 mcpdm_pins: pinmux_mcpdm_pins {
175 pinctrl-single,pins = <
176 OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
177 OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
178 OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
179 OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
180 OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
184 mcbsp1_pins: pinmux_mcbsp1_pins {
185 pinctrl-single,pins = <
186 OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
187 OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
188 OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
189 OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
193 mcbsp2_pins: pinmux_mcbsp2_pins {
194 pinctrl-single,pins = <
195 OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
196 OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
197 OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
198 OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
202 i2c1_pins: pinmux_i2c1_pins {
203 pinctrl-single,pins = <
204 OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
205 OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
209 mcspi2_pins: pinmux_mcspi2_pins {
210 pinctrl-single,pins = <
211 OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
212 OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
213 OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
214 OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
218 mcspi3_pins: pinmux_mcspi3_pins {
219 pinctrl-single,pins = <
220 OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
221 OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
222 OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
223 OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
227 mmc3_pins: pinmux_mmc3_pins {
228 pinctrl-single,pins = <
229 OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
230 OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
231 OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
232 OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
233 OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
234 OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
238 wlan_pins: pinmux_wlan_pins {
239 pinctrl-single,pins = <
240 OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
244 /* TI trees use GPIO mode; msecure mode does not work reliably? */
245 palmas_msecure_pins: palmas_msecure_pins {
246 pinctrl-single,pins = <
247 OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
251 usbhost_pins: pinmux_usbhost_pins {
252 pinctrl-single,pins = <
253 OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
254 OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
256 OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
257 OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
259 OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
260 OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
264 led_gpio_pins: pinmux_led_gpio_pins {
265 pinctrl-single,pins = <
266 OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
270 uart1_pins: pinmux_uart1_pins {
271 pinctrl-single,pins = <
272 OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
273 OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
274 OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
275 OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
279 uart3_pins: pinmux_uart3_pins {
280 pinctrl-single,pins = <
281 OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
282 OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
286 uart5_pins: pinmux_uart5_pins {
287 pinctrl-single,pins = <
288 OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
289 OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
290 OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
291 OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
295 dss_hdmi_pins: pinmux_dss_hdmi_pins {
296 pinctrl-single,pins = <
297 OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
298 OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
299 OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
303 tpd12s015_pins: pinmux_tpd12s015_pins {
304 pinctrl-single,pins = <
305 OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
311 pinctrl-names = "default";
316 palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
317 pinctrl-single,pins = <
318 OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
322 usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
323 pinctrl-single,pins = <
324 OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
328 wlcore_irq_pin: pinmux_wlcore_irq_pin {
329 pinctrl-single,pins = <
330 OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
336 vmmc-supply = <&ldo9_reg>;
341 vmmc-supply = <&vmmcsd_fixed>;
347 vmmc-supply = <&vmmcsdio_fixed>;
348 mmc-pwrseq = <&mmc3_pwrseq>;
352 pinctrl-names = "default";
353 pinctrl-0 = <&mmc3_pins>;
354 interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
355 &omap5_pmx_core 0x16a>;
357 #address-cells = <1>;
360 compatible = "ti,wl1271";
362 pinctrl-names = "default";
363 pinctrl-0 = <&wlcore_irq_pin>;
364 interrupt-parent = <&gpio1>;
365 interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */
366 ref-clock-frequency = <26000000>;
379 pinctrl-names = "default";
380 pinctrl-0 = <&i2c1_pins>;
382 clock-frequency = <400000>;
385 compatible = "ti,palmas";
386 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
388 interrupt-controller;
389 #interrupt-cells = <2>;
390 ti,system-power-controller;
391 ti,mux-pad1 = <0xa1>;
392 ti,mux-pad2 = <0x1b>;
393 pinctrl-names = "default";
394 pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
397 compatible = "ti,palmas-gpio";
402 extcon_usb3: palmas_usb {
403 compatible = "ti,palmas-usb-vid";
404 ti,enable-vbus-detection;
405 ti,enable-id-detection;
407 id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
410 clk32kgaudio: palmas_clk32k@1 {
411 compatible = "ti,palmas-clk32kgaudio";
416 compatible = "ti,palmas-rtc";
417 interrupt-parent = <&palmas>;
418 interrupts = <8 IRQ_TYPE_NONE>;
419 ti,backup-battery-chargeable;
420 ti,backup-battery-charge-high-current;
424 compatible = "ti,palmas-gpadc";
428 #io-channel-cells = <1>;
429 ti,channel0-current-microamp = <5>;
430 ti,channel3-current-microamp = <10>;
434 compatible = "ti,palmas-pmic";
435 interrupt-parent = <&palmas>;
436 interrupts = <14 IRQ_TYPE_NONE>;
437 interrupt-names = "short-irq";
441 smps123-in-supply = <&vsys_cobra>;
442 smps45-in-supply = <&vsys_cobra>;
443 smps6-in-supply = <&vsys_cobra>;
444 smps7-in-supply = <&vsys_cobra>;
445 smps8-in-supply = <&vsys_cobra>;
446 smps9-in-supply = <&vsys_cobra>;
447 smps10_out2-in-supply = <&vsys_cobra>;
448 smps10_out1-in-supply = <&vsys_cobra>;
449 ldo1-in-supply = <&vsys_cobra>;
450 ldo2-in-supply = <&vsys_cobra>;
451 ldo3-in-supply = <&vdds_1v8_main>;
452 ldo4-in-supply = <&vdds_1v8_main>;
453 ldo5-in-supply = <&vsys_cobra>;
454 ldo6-in-supply = <&vdds_1v8_main>;
455 ldo7-in-supply = <&vsys_cobra>;
456 ldo8-in-supply = <&vsys_cobra>;
457 ldo9-in-supply = <&vmmcsd_fixed>;
458 ldoln-in-supply = <&vsys_cobra>;
459 ldousb-in-supply = <&vsys_cobra>;
462 smps123_reg: smps123 {
464 regulator-name = "smps123";
465 regulator-min-microvolt = < 600000>;
466 regulator-max-microvolt = <1500000>;
473 regulator-name = "smps45";
474 regulator-min-microvolt = < 600000>;
475 regulator-max-microvolt = <1310000>;
481 /* VDD_DDR3 - over VDD_SMPS6 */
482 regulator-name = "smps6";
483 regulator-min-microvolt = <1350000>;
484 regulator-max-microvolt = <1350000>;
490 /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
491 regulator-name = "smps7";
492 regulator-min-microvolt = <1800000>;
493 regulator-max-microvolt = <1800000>;
500 regulator-name = "smps8";
501 regulator-min-microvolt = < 600000>;
502 regulator-max-microvolt = <1310000>;
508 /* VDDA_2v1_AUD over VDD_2v1 */
509 regulator-name = "smps9";
510 regulator-min-microvolt = <2100000>;
511 regulator-max-microvolt = <2100000>;
512 ti,smps-range = <0x80>;
515 smps10_out2_reg: smps10_out2 {
517 regulator-name = "smps10_out2";
518 regulator-min-microvolt = <5000000>;
519 regulator-max-microvolt = <5000000>;
524 smps10_out1_reg: smps10_out1 {
526 regulator-name = "smps10_out1";
527 regulator-min-microvolt = <5000000>;
528 regulator-max-microvolt = <5000000>;
532 /* VDDAPHY_CAM: vdda_csiport */
533 regulator-name = "ldo1";
534 regulator-min-microvolt = <1800000>;
535 regulator-max-microvolt = <1800000>;
539 /* VCC_2V8_DISP: Does not go anywhere */
540 regulator-name = "ldo2";
541 regulator-min-microvolt = <2800000>;
542 regulator-max-microvolt = <2800000>;
548 /* VDDAPHY_MDM: vdda_lli */
549 regulator-name = "ldo3";
550 regulator-min-microvolt = <1500000>;
551 regulator-max-microvolt = <1500000>;
553 /* Only if Modem is used */
558 /* VDDAPHY_DISP: vdda_dsiport/hdmi */
559 regulator-name = "ldo4";
560 regulator-min-microvolt = <1800000>;
561 regulator-max-microvolt = <1800000>;
565 /* VDDA_1V8_PHY: usb/sata/hdmi.. */
566 regulator-name = "ldo5";
567 regulator-min-microvolt = <1800000>;
568 regulator-max-microvolt = <1800000>;
574 /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
575 regulator-name = "ldo6";
576 regulator-min-microvolt = <1200000>;
577 regulator-max-microvolt = <1200000>;
584 regulator-name = "ldo7";
585 regulator-min-microvolt = <2000000>;
586 regulator-max-microvolt = <2000000>;
587 /* Only for efuse reprograming! */
592 /* VDD_3v0: Does not go anywhere */
593 regulator-name = "ldo8";
594 regulator-min-microvolt = <3000000>;
595 regulator-max-microvolt = <3000000>;
602 /* VCC_DV_SDIO: vdds_sdcard */
603 regulator-name = "ldo9";
604 regulator-min-microvolt = <1800000>;
605 regulator-max-microvolt = <3000000>;
610 /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
611 regulator-name = "ldoln";
612 regulator-min-microvolt = <1800000>;
613 regulator-max-microvolt = <1800000>;
619 /* VDDA_3V_USB: VDDA_USBHS33 */
620 regulator-name = "ldousb";
621 regulator-min-microvolt = <3250000>;
622 regulator-max-microvolt = <3250000>;
628 /* REGEN3 controls LDO9 supply to card */
629 regulator-name = "regen3";
636 palmas_power_button: palmas_power_button {
637 compatible = "ti,palmas-pwrbutton";
638 interrupt-parent = <&palmas>;
639 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
645 compatible = "ti,twl6040";
649 pinctrl-names = "default";
650 pinctrl-0 = <&twl6040_pins>;
652 interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
654 /* audpwron gpio defined in the board specific dts */
656 vio-supply = <&smps7_reg>;
657 v2v1-supply = <&smps9_reg>;
660 clocks = <&clk32kgaudio>;
661 clock-names = "clk32k";
666 pinctrl-names = "default";
667 pinctrl-0 = <&mcpdm_pins>;
670 clock-names = "pdmclk";
676 pinctrl-names = "default";
677 pinctrl-0 = <&mcbsp1_pins>;
682 pinctrl-names = "default";
683 pinctrl-0 = <&mcbsp2_pins>;
688 port2-mode = "ehci-hsic";
689 port3-mode = "ehci-hsic";
693 phys = <0 &hsusb2_phy &hsusb3_phy>;
697 extcon = <&extcon_usb3>;
698 vbus-supply = <&smps10_out1_reg>;
706 pinctrl-names = "default";
707 pinctrl-0 = <&mcspi2_pins>;
711 pinctrl-names = "default";
712 pinctrl-0 = <&mcspi3_pins>;
716 pinctrl-names = "default";
717 pinctrl-0 = <&uart1_pins>;
721 pinctrl-names = "default";
722 pinctrl-0 = <&uart3_pins>;
723 interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
724 <&omap5_pmx_core 0x19c>;
728 pinctrl-names = "default";
729 pinctrl-0 = <&uart5_pins>;
733 cpu0-supply = <&smps123_reg>;
743 /* vdda-supply populated in board specific dts file */
745 pinctrl-names = "default";
746 pinctrl-0 = <&dss_hdmi_pins>;
750 remote-endpoint = <&tpd12s015_in>;