Merge tag 'drm-msm-fixes-2021-04-02' into msm-next
[linux-2.6-microblaze.git] / arch / arm / boot / dts / omap3-igep0030-rev-g.dts
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
4  *
5  * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
6  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
7  */
8
9 #include "omap3-igep0030-common.dtsi"
10
11 / {
12         model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
13         compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
14
15         /* Regulator to trigger the WL_EN signal of the Wifi module */
16         lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
17                 compatible = "regulator-fixed";
18                 regulator-name = "regulator-lbep5clwmc-wlen";
19                 regulator-min-microvolt = <3300000>;
20                 regulator-max-microvolt = <3300000>;
21                 gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;            /* gpio_139 - WL_EN */
22                 enable-active-high;
23         };
24 };
25
26 &omap3_pmx_core {
27         lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
28                 pinctrl-single,pins = <
29                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)        /* sdmmc2_dat4.gpio_136 - W_IRQ */
30                         OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat5.gpio_137 - BT_EN */
31                         OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat7.gpio_139 - WL_EN */
32                 >;
33         };
34
35         leds_pins: pinmux_leds_pins {
36                 pinctrl-single,pins = <
37                         OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)       /* i2c2_scl.gpio_168 */
38                 >;
39         };
40
41 };
42
43 &i2c2 {
44         status = "disabled";
45 };
46
47 &leds {
48         pinctrl-names = "default";
49         pinctrl-0 = <&leds_pins &leds_core2_pins>;
50
51         boot {
52                 label = "omap3:green:boot";
53                 gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
54                 default-state = "on";
55         };
56 };
57
58 &mmc2 {
59         pinctrl-names = "default";
60         pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
61         vmmc-supply = <&lbep5clwmc_wlen>;
62         bus-width = <4>;
63         non-removable;
64
65         #address-cells = <1>;
66         #size-cells = <0>;
67         wlcore: wlcore@2 {
68                 compatible = "ti,wl1835";
69                 reg = <2>;
70                 interrupt-parent = <&gpio5>;
71                 interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
72         };
73 };
74
75 &uart2 {
76         bluetooth {
77                 compatible = "ti,wl1835-st";
78                 enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
79                 max-speed = <300000>;
80         };
81 };