2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap34xx.dtsi"
13 model = "TI OMAP3 BeagleBoard";
14 compatible = "ti,omap3-beagle", "ti,omap3";
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
33 compatible = "gpio-leds";
35 label = "beagleboard::pmu_stat";
36 gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
40 label = "beagleboard::usr0";
41 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
42 linux,default-trigger = "heartbeat";
46 label = "beagleboard::usr1";
47 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
48 linux,default-trigger = "mmc0";
52 /* HS USB Port 2 Power */
53 hsusb2_power: hsusb2_power_reg {
54 compatible = "regulator-fixed";
55 regulator-name = "hsusb2_vbus";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
59 startup-delay-us = <70000>;
62 /* HS USB Host PHY on PORT 2 */
63 hsusb2_phy: hsusb2_phy {
64 compatible = "usb-nop-xceiv";
65 reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
66 vcc-supply = <&hsusb2_power>;
71 compatible = "ti,omap-twl4030";
72 ti,model = "omap3beagle";
78 compatible = "gpio-keys";
82 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
90 compatible = "ti,tfp410";
91 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
93 pinctrl-names = "default";
94 pinctrl-0 = <&tfp410_pins>;
103 tfp410_in: endpoint {
104 remote-endpoint = <&dpi_out>;
111 tfp410_out: endpoint {
112 remote-endpoint = <&dvi_connector_in>;
119 compatible = "dvi-connector";
124 ddc-i2c-bus = <&i2c3>;
127 dvi_connector_in: endpoint {
128 remote-endpoint = <&tfp410_out>;
134 compatible = "svideo-connector";
138 tv_connector_in: endpoint {
139 remote-endpoint = <&venc_out>;
145 compatible = "arm,coresight-etb10", "arm,primecell";
146 reg = <0x5401b000 0x1000>;
148 clocks = <&emu_src_ck>;
149 clock-names = "apb_pclk";
153 remote-endpoint = <&etm_out>;
160 compatible = "arm,coresight-etm3x", "arm,primecell";
161 reg = <0x54010000 0x1000>;
163 clocks = <&emu_src_ck>;
164 clock-names = "apb_pclk";
168 remote-endpoint = <&etb_in>;
176 gpio1_pins: pinmux_gpio1_pins {
177 pinctrl-single,pins = <
178 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
184 pinctrl-names = "default";
189 hsusb2_pins: pinmux_hsusb2_pins {
190 pinctrl-single,pins = <
191 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
192 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
193 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
194 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
195 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
196 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
200 uart3_pins: pinmux_uart3_pins {
201 pinctrl-single,pins = <
202 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
203 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
207 tfp410_pins: pinmux_tfp410_pins {
208 pinctrl-single,pins = <
209 OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
213 dss_dpi_pins: pinmux_dss_dpi_pins {
214 pinctrl-single,pins = <
215 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
216 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
217 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
218 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
219 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
220 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
221 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
222 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
223 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
224 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
225 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
226 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
227 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
228 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
229 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
230 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
231 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
232 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
233 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
234 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
235 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
236 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
237 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
238 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
239 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
240 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
241 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
242 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
248 pinctrl-names = "default";
253 hsusb2_2_pins: pinmux_hsusb2_2_pins {
254 pinctrl-single,pins = <
255 OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
256 OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
257 OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
258 OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
259 OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
260 OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
266 clock-frequency = <2600000>;
270 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
271 interrupt-parent = <&intc>;
274 compatible = "ti,twl4030-audio";
281 #include "twl4030.dtsi"
282 #include "twl4030_omap3.dtsi"
285 clock-frequency = <100000>;
289 vmmc-supply = <&vmmc1>;
290 vqmmc-supply = <&vsim>;
303 port2-mode = "ehci-phy";
307 phys = <0 &hsusb2_phy>;
312 /* pullups: BIT(1) */
313 ti,pullups = <0x000002>;
316 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
317 * BIT(15), BIT(16), BIT(17)
319 ti,pulldowns = <0x03a1c4>;
323 pinctrl-names = "default";
324 pinctrl-0 = <&uart3_pins>;
325 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&gpio1_pins>;
334 interface-type = <0>;
335 usb-phy = <&usb2_phy>;
337 phy-names = "usb2-phy";
343 regulator-name = "vdd_ehci";
344 regulator-min-microvolt = <1800000>;
345 regulator-max-microvolt = <1800000>;
353 /* Needed to power the DPI pins */
361 pinctrl-names = "default";
362 pinctrl-0 = <&dss_dpi_pins>;
366 remote-endpoint = <&tfp410_in>;
375 vdda-supply = <&vdac>;
379 remote-endpoint = <&tv_connector_in>;
387 ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
391 compatible = "ti,omap2-nand";
392 reg = <0 0 4>; /* NAND I/O window, 4 bytes */
393 interrupt-parent = <&gpmc>;
394 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
395 <1 IRQ_TYPE_NONE>; /* termcount */
396 ti,nand-ecc-opt = "ham1";
397 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
398 nand-bus-width = <16>;
399 #address-cells = <1>;
402 gpmc,device-width = <2>;
404 gpmc,cs-rd-off-ns = <36>;
405 gpmc,cs-wr-off-ns = <36>;
406 gpmc,adv-on-ns = <6>;
407 gpmc,adv-rd-off-ns = <24>;
408 gpmc,adv-wr-off-ns = <36>;
410 gpmc,oe-off-ns = <48>;
412 gpmc,we-off-ns = <30>;
413 gpmc,rd-cycle-ns = <72>;
414 gpmc,wr-cycle-ns = <72>;
415 gpmc,access-ns = <54>;
416 gpmc,wr-access-ns = <30>;
424 reg = <0x80000 0x1e0000>;
427 label = "U-Boot Env";
428 reg = <0x260000 0x20000>;
432 reg = <0x280000 0x400000>;
435 label = "Filesystem";
436 reg = <0x680000 0xf980000>;