2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 #include "omap34xx.dtsi"
13 model = "TI OMAP3 BeagleBoard";
14 compatible = "ti,omap3-beagle", "ti,omap3";
23 device_type = "memory";
24 reg = <0x80000000 0x10000000>; /* 256 MB */
33 compatible = "gpio-leds";
35 label = "beagleboard::pmu_stat";
36 gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
40 label = "beagleboard::usr0";
41 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
42 linux,default-trigger = "heartbeat";
46 label = "beagleboard::usr1";
47 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
48 linux,default-trigger = "mmc0";
52 /* HS USB Port 2 Power */
53 hsusb2_power: hsusb2_power_reg {
54 compatible = "regulator-fixed";
55 regulator-name = "hsusb2_vbus";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
59 startup-delay-us = <70000>;
62 /* HS USB Host PHY on PORT 2 */
63 hsusb2_phy: hsusb2_phy {
64 compatible = "usb-nop-xceiv";
65 reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
66 vcc-supply = <&hsusb2_power>;
70 compatible = "ti,omap-twl4030";
71 ti,model = "omap3beagle";
77 compatible = "gpio-keys";
81 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
89 compatible = "ti,tfp410";
90 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
92 pinctrl-names = "default";
93 pinctrl-0 = <&tfp410_pins>;
102 tfp410_in: endpoint {
103 remote-endpoint = <&dpi_out>;
110 tfp410_out: endpoint {
111 remote-endpoint = <&dvi_connector_in>;
118 compatible = "dvi-connector";
123 ddc-i2c-bus = <&i2c3>;
126 dvi_connector_in: endpoint {
127 remote-endpoint = <&tfp410_out>;
133 compatible = "svideo-connector";
137 tv_connector_in: endpoint {
138 remote-endpoint = <&venc_out>;
144 compatible = "arm,coresight-etb10", "arm,primecell";
145 reg = <0x5401b000 0x1000>;
147 clocks = <&emu_src_ck>;
148 clock-names = "apb_pclk";
152 remote-endpoint = <&etm_out>;
158 compatible = "arm,coresight-etm3x", "arm,primecell";
159 reg = <0x54010000 0x1000>;
161 clocks = <&emu_src_ck>;
162 clock-names = "apb_pclk";
165 remote-endpoint = <&etb_in>;
172 gpio1_pins: pinmux_gpio1_pins {
173 pinctrl-single,pins = <
174 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
180 pinctrl-names = "default";
185 hsusb2_pins: pinmux_hsusb2_pins {
186 pinctrl-single,pins = <
187 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
188 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
189 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
190 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
191 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
192 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
196 uart3_pins: pinmux_uart3_pins {
197 pinctrl-single,pins = <
198 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
199 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
203 tfp410_pins: pinmux_tfp410_pins {
204 pinctrl-single,pins = <
205 OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
209 dss_dpi_pins: pinmux_dss_dpi_pins {
210 pinctrl-single,pins = <
211 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
212 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
213 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
214 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
215 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
216 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
217 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
218 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
219 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
220 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
221 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
222 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
223 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
224 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
225 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
226 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
227 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
228 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
229 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
230 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
231 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
232 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
233 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
234 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
235 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
236 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
237 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
238 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
244 pinctrl-names = "default";
249 hsusb2_2_pins: pinmux_hsusb2_2_pins {
250 pinctrl-single,pins = <
251 OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
252 OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
253 OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
254 OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
255 OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
256 OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
262 clock-frequency = <2600000>;
266 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
267 interrupt-parent = <&intc>;
270 compatible = "ti,twl4030-audio";
277 #include "twl4030.dtsi"
278 #include "twl4030_omap3.dtsi"
281 clock-frequency = <100000>;
285 vmmc-supply = <&vmmc1>;
286 vqmmc-supply = <&vsim>;
299 port2-mode = "ehci-phy";
303 phys = <0 &hsusb2_phy>;
308 /* pullups: BIT(1) */
309 ti,pullups = <0x000002>;
312 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
313 * BIT(15), BIT(16), BIT(17)
315 ti,pulldowns = <0x03a1c4>;
319 pinctrl-names = "default";
320 pinctrl-0 = <&uart3_pins>;
321 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
325 pinctrl-names = "default";
326 pinctrl-0 = <&gpio1_pins>;
330 interface-type = <0>;
331 usb-phy = <&usb2_phy>;
333 phy-names = "usb2-phy";
339 regulator-name = "vdd_ehci";
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
349 /* Needed to power the DPI pins */
357 pinctrl-names = "default";
358 pinctrl-0 = <&dss_dpi_pins>;
362 remote-endpoint = <&tfp410_in>;
371 vdda-supply = <&vdac>;
375 remote-endpoint = <&tv_connector_in>;
383 ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
387 compatible = "ti,omap2-nand";
388 reg = <0 0 4>; /* NAND I/O window, 4 bytes */
389 interrupt-parent = <&gpmc>;
390 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
391 <1 IRQ_TYPE_NONE>; /* termcount */
392 ti,nand-ecc-opt = "ham1";
393 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
394 nand-bus-width = <16>;
395 #address-cells = <1>;
398 gpmc,device-width = <2>;
400 gpmc,cs-rd-off-ns = <36>;
401 gpmc,cs-wr-off-ns = <36>;
402 gpmc,adv-on-ns = <6>;
403 gpmc,adv-rd-off-ns = <24>;
404 gpmc,adv-wr-off-ns = <36>;
406 gpmc,oe-off-ns = <48>;
408 gpmc,we-off-ns = <30>;
409 gpmc,rd-cycle-ns = <72>;
410 gpmc,wr-cycle-ns = <72>;
411 gpmc,access-ns = <54>;
412 gpmc,wr-access-ns = <30>;
420 reg = <0x80000 0x1e0000>;
423 label = "U-Boot Env";
424 reg = <0x260000 0x20000>;
428 reg = <0x280000 0x400000>;
431 label = "Filesystem";
432 reg = <0x680000 0xf980000>;