1 // SPDX-License-Identifier: GPL-2.0
4 #include "kirkwood.dtsi"
5 #include "kirkwood-6281.dtsi"
8 model = "Iomega Iconnect";
9 compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
12 device_type = "memory";
13 reg = <0x00000000 0x10000000>;
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
19 linux,initrd-start = <0x4500040>;
20 linux,initrd-end = <0x4800000>;
24 pinctrl: pin-controller@10000 {
25 pmx_button_reset: pmx-button-reset {
26 marvell,pins = "mpp12";
27 marvell,function = "gpio";
29 pmx_button_otb: pmx-button-otb {
30 marvell,pins = "mpp35";
31 marvell,function = "gpio";
33 pmx_led_level: pmx-led-level {
34 marvell,pins = "mpp41";
35 marvell,function = "gpio";
37 pmx_led_power_blue: pmx-led-power-blue {
38 marvell,pins = "mpp42";
39 marvell,function = "gpio";
41 pmx_led_power_red: pmx-power-red {
42 marvell,pins = "mpp43";
43 marvell,function = "gpio";
45 pmx_led_usb1: pmx-led-usb1 {
46 marvell,pins = "mpp44";
47 marvell,function = "gpio";
49 pmx_led_usb2: pmx-led-usb2 {
50 marvell,pins = "mpp45";
51 marvell,function = "gpio";
53 pmx_led_usb3: pmx-led-usb3 {
54 marvell,pins = "mpp46";
55 marvell,function = "gpio";
57 pmx_led_usb4: pmx-led-usb4 {
58 marvell,pins = "mpp47";
59 marvell,function = "gpio";
61 pmx_led_otb: pmx-led-otb {
62 marvell,pins = "mpp48";
63 marvell,function = "gpio";
70 compatible = "national,lm63";
80 compatible = "gpio-leds";
81 pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
82 &pmx_led_power_red &pmx_led_usb1
83 &pmx_led_usb2 &pmx_led_usb3
84 &pmx_led_usb4 &pmx_led_otb >;
85 pinctrl-names = "default";
89 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
94 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
95 default-state = "keep";
99 gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
103 gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
107 gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
111 gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
115 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
119 gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
124 compatible = "gpio-keys";
125 #address-cells = <1>;
127 pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
128 pinctrl-names = "default";
131 label = "OTB Button";
132 linux,code = <KEY_COPY>;
133 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
134 debounce-interval = <100>;
138 linux,code = <KEY_RESTART>;
139 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
140 debounce-interval = <100>;
150 reg = <0x0000000 0xc0000>;
155 reg = <0xa0000 0x20000>;
160 reg = <0x100000 0x300000>;
165 reg = <0x540000 0x300000>;
170 reg = <0x980000 0x1f400000>;
177 ethphy0: ethernet-phy@11 {
185 phy-handle = <ðphy0>;