arch/arm/boot/dts/imx6qdl.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2011 Freescale Semiconductor, Inc.
   4 // Copyright 2011 Linaro Ltd.
   5
   6 #include <dt-bindings/clock/imx6qdl-clock.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9
  10 / {
  11         #address-cells = <1>;
  12         #size-cells = <1>;
  13         /*
  14          * The decompressor and also some bootloaders rely on a
  15          * pre-existing /chosen node to be available to insert the
  16          * command line and merge other ATAGS info.
  17          */
  18         chosen {};
  19
  20         aliases {
  21                 ethernet0 = &fec;
  22                 can0 = &can1;
  23                 can1 = &can2;
  24                 gpio0 = &gpio1;
  25                 gpio1 = &gpio2;
  26                 gpio2 = &gpio3;
  27                 gpio3 = &gpio4;
  28                 gpio4 = &gpio5;
  29                 gpio5 = &gpio6;
  30                 gpio6 = &gpio7;
  31                 i2c0 = &i2c1;
  32                 i2c1 = &i2c2;
  33                 i2c2 = &i2c3;
  34                 ipu0 = &ipu1;
  35                 mmc0 = &usdhc1;
  36                 mmc1 = &usdhc2;
  37                 mmc2 = &usdhc3;
  38                 mmc3 = &usdhc4;
  39                 serial0 = &uart1;
  40                 serial1 = &uart2;
  41                 serial2 = &uart3;
  42                 serial3 = &uart4;
  43                 serial4 = &uart5;
  44                 spi0 = &ecspi1;
  45                 spi1 = &ecspi2;
  46                 spi2 = &ecspi3;
  47                 spi3 = &ecspi4;
  48                 usbphy0 = &usbphy1;
  49                 usbphy1 = &usbphy2;
  50         };
  51
  52         clocks {
  53                 ckil {
  54                         compatible = "fsl,imx-ckil", "fixed-clock";
  55                         #clock-cells = <0>;
  56                         clock-frequency = <32768>;
  57                 };
  58
  59                 ckih1 {
  60                         compatible = "fsl,imx-ckih1", "fixed-clock";
  61                         #clock-cells = <0>;
  62                         clock-frequency = <0>;
  63                 };
  64
  65                 osc {
  66                         compatible = "fsl,imx-osc", "fixed-clock";
  67                         #clock-cells = <0>;
  68                         clock-frequency = <24000000>;
  69                 };
  70         };
  71
  72         tempmon: tempmon {
  73                 compatible = "fsl,imx6q-tempmon";
  74                 interrupt-parent = <&gpc>;
  75                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
  76                 fsl,tempmon = <&anatop>;
  77                 nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
  78                 nvmem-cell-names = "calib", "temp_grade";
  79                 clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
  80                 #thermal-sensor-cells = <0>;
  81         };
  82
  83         ldb: ldb {
  84                 #address-cells = <1>;
  85                 #size-cells = <0>;
  86                 compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
  87                 gpr = <&gpr>;
  88                 status = "disabled";
  89
  90                 lvds-channel@0 {
  91                         #address-cells = <1>;
  92                         #size-cells = <0>;
  93                         reg = <0>;
  94                         status = "disabled";
  95
  96                         port@0 {
  97                                 reg = <0>;
  98
  99                                 lvds0_mux_0: endpoint {
 100                                         remote-endpoint = <&ipu1_di0_lvds0>;
 101                                 };
 102                         };
 103
 104                         port@1 {
 105                                 reg = <1>;
 106
 107                                 lvds0_mux_1: endpoint {
 108                                         remote-endpoint = <&ipu1_di1_lvds0>;
 109                                 };
 110                         };
 111                 };
 112
 113                 lvds-channel@1 {
 114                         #address-cells = <1>;
 115                         #size-cells = <0>;
 116                         reg = <1>;
 117                         status = "disabled";
 118
 119                         port@0 {
 120                                 reg = <0>;
 121
 122                                 lvds1_mux_0: endpoint {
 123                                         remote-endpoint = <&ipu1_di0_lvds1>;
 124                                 };
 125                         };
 126
 127                         port@1 {
 128                                 reg = <1>;
 129
 130                                 lvds1_mux_1: endpoint {
 131                                         remote-endpoint = <&ipu1_di1_lvds1>;
 132                                 };
 133                         };
 134                 };
 135         };
 136
 137         pmu: pmu {
 138                 compatible = "arm,cortex-a9-pmu";
 139                 interrupt-parent = <&gpc>;
 140                 interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 141         };
 142
 143         usbphynop1: usbphynop1 {
 144                 compatible = "usb-nop-xceiv";
 145                 #phy-cells = <0>;
 146         };
 147
 148         usbphynop2: usbphynop2 {
 149                 compatible = "usb-nop-xceiv";
 150                 #phy-cells = <0>;
 151         };
 152
 153         soc {
 154                 #address-cells = <1>;
 155                 #size-cells = <1>;
 156                 compatible = "simple-bus";
 157                 interrupt-parent = <&gpc>;
 158                 ranges;
 159
 160                 dma_apbh: dma-apbh@110000 {
 161                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 162                         reg = <0x00110000 0x2000>;
 163                         interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 164                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 165                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 166                                      <0 13 IRQ_TYPE_LEVEL_HIGH>;
 167                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 168                         #dma-cells = <1>;
 169                         dma-channels = <4>;
 170                         clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
 171                 };
 172
 173                 gpmi: gpmi-nand@112000 {
 174                         compatible = "fsl,imx6q-gpmi-nand";
 175                         reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 176                         reg-names = "gpmi-nand", "bch";
 177                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 178                         interrupt-names = "bch";
 179                         clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
 180                                  <&clks IMX6QDL_CLK_GPMI_APB>,
 181                                  <&clks IMX6QDL_CLK_GPMI_BCH>,
 182                                  <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
 183                                  <&clks IMX6QDL_CLK_PER1_BCH>;
 184                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 185                                       "gpmi_bch_apb", "per1_bch";
 186                         dmas = <&dma_apbh 0>;
 187                         dma-names = "rx-tx";
 188                         status = "disabled";
 189                 };
 190
 191                 hdmi: hdmi@120000 {
 192                         #address-cells = <1>;
 193                         #size-cells = <0>;
 194                         reg = <0x00120000 0x9000>;
 195                         interrupts = <0 115 0x04>;
 196                         gpr = <&gpr>;
 197                         clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
 198                                  <&clks IMX6QDL_CLK_HDMI_ISFR>;
 199                         clock-names = "iahb", "isfr";
 200                         status = "disabled";
 201
 202                         port@0 {
 203                                 reg = <0>;
 204
 205                                 hdmi_mux_0: endpoint {
 206                                         remote-endpoint = <&ipu1_di0_hdmi>;
 207                                 };
 208                         };
 209
 210                         port@1 {
 211                                 reg = <1>;
 212
 213                                 hdmi_mux_1: endpoint {
 214                                         remote-endpoint = <&ipu1_di1_hdmi>;
 215                                 };
 216                         };
 217                 };
 218
 219                 gpu_3d: gpu@130000 {
 220                         compatible = "vivante,gc";
 221                         reg = <0x00130000 0x4000>;
 222                         interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
 223                         clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
 224                                  <&clks IMX6QDL_CLK_GPU3D_CORE>,
 225                                  <&clks IMX6QDL_CLK_GPU3D_SHADER>;
 226                         clock-names = "bus", "core", "shader";
 227                         power-domains = <&pd_pu>;
 228                         #cooling-cells = <2>;
 229                 };
 230
 231                 gpu_2d: gpu@134000 {
 232                         compatible = "vivante,gc";
 233                         reg = <0x00134000 0x4000>;
 234                         interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 235                         clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
 236                                  <&clks IMX6QDL_CLK_GPU2D_CORE>;
 237                         clock-names = "bus", "core";
 238                         power-domains = <&pd_pu>;
 239                         #cooling-cells = <2>;
 240                 };
 241
 242                 timer@a00600 {
 243                         compatible = "arm,cortex-a9-twd-timer";
 244                         reg = <0x00a00600 0x20>;
 245                         interrupts = <1 13 0xf01>;
 246                         interrupt-parent = <&intc>;
 247                         clocks = <&clks IMX6QDL_CLK_TWD>;
 248                 };
 249
 250                 intc: interrupt-controller@a01000 {
 251                         compatible = "arm,cortex-a9-gic";
 252                         #interrupt-cells = <3>;
 253                         interrupt-controller;
 254                         reg = <0x00a01000 0x1000>,
 255                               <0x00a00100 0x100>;
 256                         interrupt-parent = <&intc>;
 257                 };
 258
 259                 L2: l2-cache@a02000 {
 260                         compatible = "arm,pl310-cache";
 261                         reg = <0x00a02000 0x1000>;
 262                         interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 263                         cache-unified;
 264                         cache-level = <2>;
 265                         arm,tag-latency = <4 2 3>;
 266                         arm,data-latency = <4 2 3>;
 267                         arm,shared-override;
 268                 };
 269
 270                 pcie: pcie@1ffc000 {
 271                         compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 272                         reg = <0x01ffc000 0x04000>,
 273                               <0x01f00000 0x80000>;
 274                         reg-names = "dbi", "config";
 275                         #address-cells = <3>;
 276                         #size-cells = <2>;
 277                         device_type = "pci";
 278                         bus-range = <0x00 0xff>;
 279                         ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 280                                   0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 281                         num-lanes = <1>;
 282                         num-viewport = <4>;
 283                         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 284                         interrupt-names = "msi";
 285                         #interrupt-cells = <1>;
 286                         interrupt-map-mask = <0 0 0 0x7>;
 287                         interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 288                                         <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 289                                         <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 290                                         <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 291                         clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
 292                                  <&clks IMX6QDL_CLK_LVDS1_GATE>,
 293                                  <&clks IMX6QDL_CLK_PCIE_REF_125M>;
 294                         clock-names = "pcie", "pcie_bus", "pcie_phy";
 295                         status = "disabled";
 296                 };
 297
 298                 bus@2000000 { /* AIPS1 */
 299                         compatible = "fsl,aips-bus", "simple-bus";
 300                         #address-cells = <1>;
 301                         #size-cells = <1>;
 302                         reg = <0x02000000 0x100000>;
 303                         ranges;
 304
 305                         spba-bus@2000000 {
 306                                 compatible = "fsl,spba-bus", "simple-bus";
 307                                 #address-cells = <1>;
 308                                 #size-cells = <1>;
 309                                 reg = <0x02000000 0x40000>;
 310                                 ranges;
 311
 312                                 spdif: spdif@2004000 {
 313                                         compatible = "fsl,imx35-spdif";
 314                                         reg = <0x02004000 0x4000>;
 315                                         interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 316                                         dmas = <&sdma 14 18 0>,
 317                                                <&sdma 15 18 0>;
 318                                         dma-names = "rx", "tx";
 319                                         clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 320                                                  <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 321                                                  <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 322                                                  <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 323                                                  <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 324                                         clock-names = "core",  "rxtx0",
 325                                                       "rxtx1", "rxtx2",
 326                                                       "rxtx3", "rxtx4",
 327                                                       "rxtx5", "rxtx6",
 328                                                       "rxtx7", "spba";
 329                                         status = "disabled";
 330                                 };
 331
 332                                 ecspi1: spi@2008000 {
 333                                         #address-cells = <1>;
 334                                         #size-cells = <0>;
 335                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 336                                         reg = <0x02008000 0x4000>;
 337                                         interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 338                                         clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 339                                                  <&clks IMX6QDL_CLK_ECSPI1>;
 340                                         clock-names = "ipg", "per";
 341                                         dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
 342                                         dma-names = "rx", "tx";
 343                                         status = "disabled";
 344                                 };
 345
 346                                 ecspi2: spi@200c000 {
 347                                         #address-cells = <1>;
 348                                         #size-cells = <0>;
 349                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 350                                         reg = <0x0200c000 0x4000>;
 351                                         interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 352                                         clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 353                                                  <&clks IMX6QDL_CLK_ECSPI2>;
 354                                         clock-names = "ipg", "per";
 355                                         dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
 356                                         dma-names = "rx", "tx";
 357                                         status = "disabled";
 358                                 };
 359
 360                                 ecspi3: spi@2010000 {
 361                                         #address-cells = <1>;
 362                                         #size-cells = <0>;
 363                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 364                                         reg = <0x02010000 0x4000>;
 365                                         interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 366                                         clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 367                                                  <&clks IMX6QDL_CLK_ECSPI3>;
 368                                         clock-names = "ipg", "per";
 369                                         dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
 370                                         dma-names = "rx", "tx";
 371                                         status = "disabled";
 372                                 };
 373
 374                                 ecspi4: spi@2014000 {
 375                                         #address-cells = <1>;
 376                                         #size-cells = <0>;
 377                                         compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 378                                         reg = <0x02014000 0x4000>;
 379                                         interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 380                                         clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 381                                                  <&clks IMX6QDL_CLK_ECSPI4>;
 382                                         clock-names = "ipg", "per";
 383                                         dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
 384                                         dma-names = "rx", "tx";
 385                                         status = "disabled";
 386                                 };
 387
 388                                 uart1: serial@2020000 {
 389                                         compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 390                                         reg = <0x02020000 0x4000>;
 391                                         interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 392                                         clocks = <&clks IMX6QDL_CLK_UART_IPG>,
 393                                                  <&clks IMX6QDL_CLK_UART_SERIAL>;
 394                                         clock-names = "ipg", "per";
 395                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 396                                         dma-names = "rx", "tx";
 397                                         status = "disabled";
 398                                 };
 399
 400                                 esai: esai@2024000 {
 401                                         #sound-dai-cells = <0>;
 402                                         compatible = "fsl,imx35-esai";
 403                                         reg = <0x02024000 0x4000>;
 404                                         interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 405                                         clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
 406                                                  <&clks IMX6QDL_CLK_ESAI_MEM>,
 407                                                  <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 408                                                  <&clks IMX6QDL_CLK_ESAI_IPG>,
 409                                                  <&clks IMX6QDL_CLK_SPBA>;
 410                                         clock-names = "core", "mem", "extal", "fsys", "spba";
 411                                         dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 412                                         dma-names = "rx", "tx";
 413                                         status = "disabled";
 414                                 };
 415
 416                                 ssi1: ssi@2028000 {
 417                                         #sound-dai-cells = <0>;
 418                                         compatible = "fsl,imx6q-ssi",
 419                                                         "fsl,imx51-ssi";
 420                                         reg = <0x02028000 0x4000>;
 421                                         interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 422                                         clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
 423                                                  <&clks IMX6QDL_CLK_SSI1>;
 424                                         clock-names = "ipg", "baud";
 425                                         dmas = <&sdma 37 1 0>,
 426                                                <&sdma 38 1 0>;
 427                                         dma-names = "rx", "tx";
 428                                         fsl,fifo-depth = <15>;
 429                                         status = "disabled";
 430                                 };
 431
 432                                 ssi2: ssi@202c000 {
 433                                         #sound-dai-cells = <0>;
 434                                         compatible = "fsl,imx6q-ssi",
 435                                                         "fsl,imx51-ssi";
 436                                         reg = <0x0202c000 0x4000>;
 437                                         interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 438                                         clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
 439                                                  <&clks IMX6QDL_CLK_SSI2>;
 440                                         clock-names = "ipg", "baud";
 441                                         dmas = <&sdma 41 1 0>,
 442                                                <&sdma 42 1 0>;
 443                                         dma-names = "rx", "tx";
 444                                         fsl,fifo-depth = <15>;
 445                                         status = "disabled";
 446                                 };
 447
 448                                 ssi3: ssi@2030000 {
 449                                         #sound-dai-cells = <0>;
 450                                         compatible = "fsl,imx6q-ssi",
 451                                                         "fsl,imx51-ssi";
 452                                         reg = <0x02030000 0x4000>;
 453                                         interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 454                                         clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
 455                                                  <&clks IMX6QDL_CLK_SSI3>;
 456                                         clock-names = "ipg", "baud";
 457                                         dmas = <&sdma 45 1 0>,
 458                                                <&sdma 46 1 0>;
 459                                         dma-names = "rx", "tx";
 460                                         fsl,fifo-depth = <15>;
 461                                         status = "disabled";
 462                                 };
 463
 464                                 asrc: asrc@2034000 {
 465                                         compatible = "fsl,imx53-asrc";
 466                                         reg = <0x02034000 0x4000>;
 467                                         interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 468                                         clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
 469                                                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
 470                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 471                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 472                                                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
 473                                                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
 474                                                 <&clks IMX6QDL_CLK_SPBA>;
 475                                         clock-names = "mem", "ipg", "asrck_0",
 476                                                 "asrck_1", "asrck_2", "asrck_3", "asrck_4",
 477                                                 "asrck_5", "asrck_6", "asrck_7", "asrck_8",
 478                                                 "asrck_9", "asrck_a", "asrck_b", "asrck_c",
 479                                                 "asrck_d", "asrck_e", "asrck_f", "spba";
 480                                         dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
 481                                                 <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 482                                         dma-names = "rxa", "rxb", "rxc",
 483                                                         "txa", "txb", "txc";
 484                                         fsl,asrc-rate  = <48000>;
 485                                         fsl,asrc-width = <16>;
 486                                         status = "okay";
 487                                 };
 488
 489                                 spba@203c000 {
 490                                         reg = <0x0203c000 0x4000>;
 491                                 };
 492                         };
 493
 494                         vpu: vpu@2040000 {
 495                                 compatible = "cnm,coda960";
 496                                 reg = <0x02040000 0x3c000>;
 497                                 interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
 498                                              <0 3 IRQ_TYPE_LEVEL_HIGH>;
 499                                 interrupt-names = "bit", "jpeg";
 500                                 clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 501                                          <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
 502                                 clock-names = "per", "ahb";
 503                                 power-domains = <&pd_pu>;
 504                                 resets = <&src 1>;
 505                                 iram = <&ocram>;
 506                         };
 507
 508                         aipstz@207c000 { /* AIPSTZ1 */
 509                                 reg = <0x0207c000 0x4000>;
 510                         };
 511
 512                         pwm1: pwm@2080000 {
 513                                 #pwm-cells = <2>;
 514                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 515                                 reg = <0x02080000 0x4000>;
 516                                 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 517                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 518                                          <&clks IMX6QDL_CLK_PWM1>;
 519                                 clock-names = "ipg", "per";
 520                                 status = "disabled";
 521                         };
 522
 523                         pwm2: pwm@2084000 {
 524                                 #pwm-cells = <2>;
 525                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 526                                 reg = <0x02084000 0x4000>;
 527                                 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 528                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 529                                          <&clks IMX6QDL_CLK_PWM2>;
 530                                 clock-names = "ipg", "per";
 531                                 status = "disabled";
 532                         };
 533
 534                         pwm3: pwm@2088000 {
 535                                 #pwm-cells = <2>;
 536                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 537                                 reg = <0x02088000 0x4000>;
 538                                 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 539                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 540                                          <&clks IMX6QDL_CLK_PWM3>;
 541                                 clock-names = "ipg", "per";
 542                                 status = "disabled";
 543                         };
 544
 545                         pwm4: pwm@208c000 {
 546                                 #pwm-cells = <2>;
 547                                 compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 548                                 reg = <0x0208c000 0x4000>;
 549                                 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 550                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 551                                          <&clks IMX6QDL_CLK_PWM4>;
 552                                 clock-names = "ipg", "per";
 553                                 status = "disabled";
 554                         };
 555
 556                         can1: flexcan@2090000 {
 557                                 compatible = "fsl,imx6q-flexcan";
 558                                 reg = <0x02090000 0x4000>;
 559                                 interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 560                                 clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
 561                                          <&clks IMX6QDL_CLK_CAN1_SERIAL>;
 562                                 clock-names = "ipg", "per";
 563                                 fsl,stop-mode = <&gpr 0x34 28 0x10 17>;
 564                                 status = "disabled";
 565                         };
 566
 567                         can2: flexcan@2094000 {
 568                                 compatible = "fsl,imx6q-flexcan";
 569                                 reg = <0x02094000 0x4000>;
 570                                 interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 571                                 clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
 572                                          <&clks IMX6QDL_CLK_CAN2_SERIAL>;
 573                                 clock-names = "ipg", "per";
 574                                 fsl,stop-mode = <&gpr 0x34 29 0x10 18>;
 575                                 status = "disabled";
 576                         };
 577
 578                         gpt: timer@2098000 {
 579                                 compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 580                                 reg = <0x02098000 0x4000>;
 581                                 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 582                                 clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
 583                                          <&clks IMX6QDL_CLK_GPT_IPG_PER>,
 584                                          <&clks IMX6QDL_CLK_GPT_3M>;
 585                                 clock-names = "ipg", "per", "osc_per";
 586                         };
 587
 588                         gpio1: gpio@209c000 {
 589                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 590                                 reg = <0x0209c000 0x4000>;
 591                                 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
 592                                              <0 67 IRQ_TYPE_LEVEL_HIGH>;
 593                                 gpio-controller;
 594                                 #gpio-cells = <2>;
 595                                 interrupt-controller;
 596                                 #interrupt-cells = <2>;
 597                         };
 598
 599                         gpio2: gpio@20a0000 {
 600                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 601                                 reg = <0x020a0000 0x4000>;
 602                                 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
 603                                              <0 69 IRQ_TYPE_LEVEL_HIGH>;
 604                                 gpio-controller;
 605                                 #gpio-cells = <2>;
 606                                 interrupt-controller;
 607                                 #interrupt-cells = <2>;
 608                         };
 609
 610                         gpio3: gpio@20a4000 {
 611                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 612                                 reg = <0x020a4000 0x4000>;
 613                                 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
 614                                              <0 71 IRQ_TYPE_LEVEL_HIGH>;
 615                                 gpio-controller;
 616                                 #gpio-cells = <2>;
 617                                 interrupt-controller;
 618                                 #interrupt-cells = <2>;
 619                         };
 620
 621                         gpio4: gpio@20a8000 {
 622                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 623                                 reg = <0x020a8000 0x4000>;
 624                                 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
 625                                              <0 73 IRQ_TYPE_LEVEL_HIGH>;
 626                                 gpio-controller;
 627                                 #gpio-cells = <2>;
 628                                 interrupt-controller;
 629                                 #interrupt-cells = <2>;
 630                         };
 631
 632                         gpio5: gpio@20ac000 {
 633                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 634                                 reg = <0x020ac000 0x4000>;
 635                                 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
 636                                              <0 75 IRQ_TYPE_LEVEL_HIGH>;
 637                                 gpio-controller;
 638                                 #gpio-cells = <2>;
 639                                 interrupt-controller;
 640                                 #interrupt-cells = <2>;
 641                         };
 642
 643                         gpio6: gpio@20b0000 {
 644                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 645                                 reg = <0x020b0000 0x4000>;
 646                                 interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
 647                                              <0 77 IRQ_TYPE_LEVEL_HIGH>;
 648                                 gpio-controller;
 649                                 #gpio-cells = <2>;
 650                                 interrupt-controller;
 651                                 #interrupt-cells = <2>;
 652                         };
 653
 654                         gpio7: gpio@20b4000 {
 655                                 compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 656                                 reg = <0x020b4000 0x4000>;
 657                                 interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
 658                                              <0 79 IRQ_TYPE_LEVEL_HIGH>;
 659                                 gpio-controller;
 660                                 #gpio-cells = <2>;
 661                                 interrupt-controller;
 662                                 #interrupt-cells = <2>;
 663                         };
 664
 665                         kpp: keypad@20b8000 {
 666                                 compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
 667                                 reg = <0x020b8000 0x4000>;
 668                                 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 669                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 670                                 status = "disabled";
 671                         };
 672
 673                         wdog1: watchdog@20bc000 {
 674                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 675                                 reg = <0x020bc000 0x4000>;
 676                                 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 677                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 678                         };
 679
 680                         wdog2: watchdog@20c0000 {
 681                                 compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 682                                 reg = <0x020c0000 0x4000>;
 683                                 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 684                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 685                                 status = "disabled";
 686                         };
 687
 688                         clks: clock-controller@20c4000 {
 689                                 compatible = "fsl,imx6q-ccm";
 690                                 reg = <0x020c4000 0x4000>;
 691                                 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
 692                                              <0 88 IRQ_TYPE_LEVEL_HIGH>;
 693                                 #clock-cells = <1>;
 694                         };
 695
 696                         anatop: anatop@20c8000 {
 697                                 compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
 698                                 reg = <0x020c8000 0x1000>;
 699                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
 700                                              <0 54 IRQ_TYPE_LEVEL_HIGH>,
 701                                              <0 127 IRQ_TYPE_LEVEL_HIGH>;
 702
 703                                 reg_vdd1p1: regulator-1p1 {
 704                                         compatible = "fsl,anatop-regulator";
 705                                         regulator-name = "vdd1p1";
 706                                         regulator-min-microvolt = <1000000>;
 707                                         regulator-max-microvolt = <1200000>;
 708                                         regulator-always-on;
 709                                         anatop-reg-offset = <0x110>;
 710                                         anatop-vol-bit-shift = <8>;
 711                                         anatop-vol-bit-width = <5>;
 712                                         anatop-min-bit-val = <4>;
 713                                         anatop-min-voltage = <800000>;
 714                                         anatop-max-voltage = <1375000>;
 715                                         anatop-enable-bit = <0>;
 716                                 };
 717
 718                                 reg_vdd3p0: regulator-3p0 {
 719                                         compatible = "fsl,anatop-regulator";
 720                                         regulator-name = "vdd3p0";
 721                                         regulator-min-microvolt = <2800000>;
 722                                         regulator-max-microvolt = <3150000>;
 723                                         regulator-always-on;
 724                                         anatop-reg-offset = <0x120>;
 725                                         anatop-vol-bit-shift = <8>;
 726                                         anatop-vol-bit-width = <5>;
 727                                         anatop-min-bit-val = <0>;
 728                                         anatop-min-voltage = <2625000>;
 729                                         anatop-max-voltage = <3400000>;
 730                                         anatop-enable-bit = <0>;
 731                                 };
 732
 733                                 reg_vdd2p5: regulator-2p5 {
 734                                         compatible = "fsl,anatop-regulator";
 735                                         regulator-name = "vdd2p5";
 736                                         regulator-min-microvolt = <2250000>;
 737                                         regulator-max-microvolt = <2750000>;
 738                                         regulator-always-on;
 739                                         anatop-reg-offset = <0x130>;
 740                                         anatop-vol-bit-shift = <8>;
 741                                         anatop-vol-bit-width = <5>;
 742                                         anatop-min-bit-val = <0>;
 743                                         anatop-min-voltage = <2100000>;
 744                                         anatop-max-voltage = <2875000>;
 745                                         anatop-enable-bit = <0>;
 746                                 };
 747
 748                                 reg_arm: regulator-vddcore {
 749                                         compatible = "fsl,anatop-regulator";
 750                                         regulator-name = "vddarm";
 751                                         regulator-min-microvolt = <725000>;
 752                                         regulator-max-microvolt = <1450000>;
 753                                         regulator-always-on;
 754                                         anatop-reg-offset = <0x140>;
 755                                         anatop-vol-bit-shift = <0>;
 756                                         anatop-vol-bit-width = <5>;
 757                                         anatop-delay-reg-offset = <0x170>;
 758                                         anatop-delay-bit-shift = <24>;
 759                                         anatop-delay-bit-width = <2>;
 760                                         anatop-min-bit-val = <1>;
 761                                         anatop-min-voltage = <725000>;
 762                                         anatop-max-voltage = <1450000>;
 763                                 };
 764
 765                                 reg_pu: regulator-vddpu {
 766                                         compatible = "fsl,anatop-regulator";
 767                                         regulator-name = "vddpu";
 768                                         regulator-min-microvolt = <725000>;
 769                                         regulator-max-microvolt = <1450000>;
 770                                         regulator-enable-ramp-delay = <150>;
 771                                         anatop-reg-offset = <0x140>;
 772                                         anatop-vol-bit-shift = <9>;
 773                                         anatop-vol-bit-width = <5>;
 774                                         anatop-delay-reg-offset = <0x170>;
 775                                         anatop-delay-bit-shift = <26>;
 776                                         anatop-delay-bit-width = <2>;
 777                                         anatop-min-bit-val = <1>;
 778                                         anatop-min-voltage = <725000>;
 779                                         anatop-max-voltage = <1450000>;
 780                                 };
 781
 782                                 reg_soc: regulator-vddsoc {
 783                                         compatible = "fsl,anatop-regulator";
 784                                         regulator-name = "vddsoc";
 785                                         regulator-min-microvolt = <725000>;
 786                                         regulator-max-microvolt = <1450000>;
 787                                         regulator-always-on;
 788                                         anatop-reg-offset = <0x140>;
 789                                         anatop-vol-bit-shift = <18>;
 790                                         anatop-vol-bit-width = <5>;
 791                                         anatop-delay-reg-offset = <0x170>;
 792                                         anatop-delay-bit-shift = <28>;
 793                                         anatop-delay-bit-width = <2>;
 794                                         anatop-min-bit-val = <1>;
 795                                         anatop-min-voltage = <725000>;
 796                                         anatop-max-voltage = <1450000>;
 797                                 };
 798                         };
 799
 800                         usbphy1: usbphy@20c9000 {
 801                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 802                                 reg = <0x020c9000 0x1000>;
 803                                 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 804                                 clocks = <&clks IMX6QDL_CLK_USBPHY1>;
 805                                 fsl,anatop = <&anatop>;
 806                         };
 807
 808                         usbphy2: usbphy@20ca000 {
 809                                 compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 810                                 reg = <0x020ca000 0x1000>;
 811                                 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 812                                 clocks = <&clks IMX6QDL_CLK_USBPHY2>;
 813                                 fsl,anatop = <&anatop>;
 814                         };
 815
 816                         snvs: snvs@20cc000 {
 817                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 818                                 reg = <0x020cc000 0x4000>;
 819
 820                                 snvs_rtc: snvs-rtc-lp {
 821                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 822                                         regmap = <&snvs>;
 823                                         offset = <0x34>;
 824                                         interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 825                                                      <0 20 IRQ_TYPE_LEVEL_HIGH>;
 826                                 };
 827
 828                                 snvs_poweroff: snvs-poweroff {
 829                                         compatible = "syscon-poweroff";
 830                                         regmap = <&snvs>;
 831                                         offset = <0x38>;
 832                                         value = <0x60>;
 833                                         mask = <0x60>;
 834                                         status = "disabled";
 835                                 };
 836
 837                                 snvs_pwrkey: snvs-powerkey {
 838                                         compatible = "fsl,sec-v4.0-pwrkey";
 839                                         regmap = <&snvs>;
 840                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 841                                         linux,keycode = <KEY_POWER>;
 842                                         wakeup-source;
 843                                         status = "disabled";
 844                                 };
 845
 846                                 snvs_lpgpr: snvs-lpgpr {
 847                                         compatible = "fsl,imx6q-snvs-lpgpr";
 848                                 };
 849                         };
 850
 851                         epit1: epit@20d0000 { /* EPIT1 */
 852                                 reg = <0x020d0000 0x4000>;
 853                                 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 854                         };
 855
 856                         epit2: epit@20d4000 { /* EPIT2 */
 857                                 reg = <0x020d4000 0x4000>;
 858                                 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 859                         };
 860
 861                         src: reset-controller@20d8000 {
 862                                 compatible = "fsl,imx6q-src", "fsl,imx51-src";
 863                                 reg = <0x020d8000 0x4000>;
 864                                 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
 865                                              <0 96 IRQ_TYPE_LEVEL_HIGH>;
 866                                 #reset-cells = <1>;
 867                         };
 868
 869                         gpc: gpc@20dc000 {
 870                                 compatible = "fsl,imx6q-gpc";
 871                                 reg = <0x020dc000 0x4000>;
 872                                 interrupt-controller;
 873                                 #interrupt-cells = <3>;
 874                                 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
 875                                              <0 90 IRQ_TYPE_LEVEL_HIGH>;
 876                                 interrupt-parent = <&intc>;
 877                                 clocks = <&clks IMX6QDL_CLK_IPG>;
 878                                 clock-names = "ipg";
 879
 880                                 pgc {
 881                                         #address-cells = <1>;
 882                                         #size-cells = <0>;
 883
 884                                         power-domain@0 {
 885                                                 reg = <0>;
 886                                                 #power-domain-cells = <0>;
 887                                         };
 888                                         pd_pu: power-domain@1 {
 889                                                 reg = <1>;
 890                                                 #power-domain-cells = <0>;
 891                                                 power-supply = <&reg_pu>;
 892                                                 clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
 893                                                          <&clks IMX6QDL_CLK_GPU3D_SHADER>,
 894                                                          <&clks IMX6QDL_CLK_GPU2D_CORE>,
 895                                                          <&clks IMX6QDL_CLK_GPU2D_AXI>,
 896                                                          <&clks IMX6QDL_CLK_OPENVG_AXI>,
 897                                                          <&clks IMX6QDL_CLK_VPU_AXI>;
 898                                         };
 899                                 };
 900                         };
 901
 902                         gpr: iomuxc-gpr@20e0000 {
 903                                 compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
 904                                 reg = <0x20e0000 0x38>;
 905
 906                                 mux: mux-controller {
 907                                         compatible = "mmio-mux";
 908                                         #mux-control-cells = <1>;
 909                                 };
 910                         };
 911
 912                         iomuxc: pinctrl@20e0000 {
 913                                 compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 914                                 reg = <0x20e0000 0x4000>;
 915                         };
 916
 917                         dcic1: dcic@20e4000 {
 918                                 reg = <0x020e4000 0x4000>;
 919                                 interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 920                         };
 921
 922                         dcic2: dcic@20e8000 {
 923                                 reg = <0x020e8000 0x4000>;
 924                                 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 925                         };
 926
 927                         sdma: sdma@20ec000 {
 928                                 compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 929                                 reg = <0x020ec000 0x4000>;
 930                                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 931                                 clocks = <&clks IMX6QDL_CLK_IPG>,
 932                                          <&clks IMX6QDL_CLK_SDMA>;
 933                                 clock-names = "ipg", "ahb";
 934                                 #dma-cells = <3>;
 935                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 936                         };
 937                 };
 938
 939                 bus@2100000 { /* AIPS2 */
 940                         compatible = "fsl,aips-bus", "simple-bus";
 941                         #address-cells = <1>;
 942                         #size-cells = <1>;
 943                         reg = <0x02100000 0x100000>;
 944                         ranges;
 945
 946                         crypto: crypto@2100000 {
 947                                 compatible = "fsl,sec-v4.0";
 948                                 #address-cells = <1>;
 949                                 #size-cells = <1>;
 950                                 reg = <0x2100000 0x10000>;
 951                                 ranges = <0 0x2100000 0x10000>;
 952                                 clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 953                                          <&clks IMX6QDL_CLK_CAAM_ACLK>,
 954                                          <&clks IMX6QDL_CLK_CAAM_IPG>,
 955                                          <&clks IMX6QDL_CLK_EIM_SLOW>;
 956                                 clock-names = "mem", "aclk", "ipg", "emi_slow";
 957
 958                                 sec_jr0: jr@1000 {
 959                                         compatible = "fsl,sec-v4.0-job-ring";
 960                                         reg = <0x1000 0x1000>;
 961                                         interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 962                                 };
 963
 964                                 sec_jr1: jr@2000 {
 965                                         compatible = "fsl,sec-v4.0-job-ring";
 966                                         reg = <0x2000 0x1000>;
 967                                         interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 968                                 };
 969                         };
 970
 971                         aipstz@217c000 { /* AIPSTZ2 */
 972                                 reg = <0x0217c000 0x4000>;
 973                         };
 974
 975                         usbotg: usb@2184000 {
 976                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 977                                 reg = <0x02184000 0x200>;
 978                                 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 979                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
 980                                 fsl,usbphy = <&usbphy1>;
 981                                 fsl,usbmisc = <&usbmisc 0>;
 982                                 ahb-burst-config = <0x0>;
 983                                 tx-burst-size-dword = <0x10>;
 984                                 rx-burst-size-dword = <0x10>;
 985                                 status = "disabled";
 986                         };
 987
 988                         usbh1: usb@2184200 {
 989                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 990                                 reg = <0x02184200 0x200>;
 991                                 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 992                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
 993                                 fsl,usbphy = <&usbphy2>;
 994                                 fsl,usbmisc = <&usbmisc 1>;
 995                                 dr_mode = "host";
 996                                 ahb-burst-config = <0x0>;
 997                                 tx-burst-size-dword = <0x10>;
 998                                 rx-burst-size-dword = <0x10>;
 999                                 status = "disabled";
1000                         };
1001
1002                         usbh2: usb@2184400 {
1003                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
1004                                 reg = <0x02184400 0x200>;
1005                                 interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
1006                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
1007                                 fsl,usbphy = <&usbphynop1>;
1008                                 phy_type = "hsic";
1009                                 fsl,usbmisc = <&usbmisc 2>;
1010                                 dr_mode = "host";
1011                                 ahb-burst-config = <0x0>;
1012                                 tx-burst-size-dword = <0x10>;
1013                                 rx-burst-size-dword = <0x10>;
1014                                 status = "disabled";
1015                         };
1016
1017                         usbh3: usb@2184600 {
1018                                 compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
1019                                 reg = <0x02184600 0x200>;
1020                                 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
1021                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
1022                                 fsl,usbphy = <&usbphynop2>;
1023                                 phy_type = "hsic";
1024                                 fsl,usbmisc = <&usbmisc 3>;
1025                                 dr_mode = "host";
1026                                 ahb-burst-config = <0x0>;
1027                                 tx-burst-size-dword = <0x10>;
1028                                 rx-burst-size-dword = <0x10>;
1029                                 status = "disabled";
1030                         };
1031
1032                         usbmisc: usbmisc@2184800 {
1033                                 #index-cells = <1>;
1034                                 compatible = "fsl,imx6q-usbmisc";
1035                                 reg = <0x02184800 0x200>;
1036                                 clocks = <&clks IMX6QDL_CLK_USBOH3>;
1037                         };
1038
1039                         fec: ethernet@2188000 {
1040                                 compatible = "fsl,imx6q-fec";
1041                                 reg = <0x02188000 0x4000>;
1042                                 interrupt-names = "int0", "pps";
1043                                 interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
1044                                              <0 119 IRQ_TYPE_LEVEL_HIGH>;
1045                                 clocks = <&clks IMX6QDL_CLK_ENET>,
1046                                          <&clks IMX6QDL_CLK_ENET>,
1047                                          <&clks IMX6QDL_CLK_ENET_REF>;
1048                                 clock-names = "ipg", "ahb", "ptp";
1049                                 fsl,stop-mode = <&gpr 0x34 27>;
1050                                 status = "disabled";
1051                         };
1052
1053                         mlb@218c000 {
1054                                 reg = <0x0218c000 0x4000>;
1055                                 interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
1056                                              <0 117 IRQ_TYPE_LEVEL_HIGH>,
1057                                              <0 126 IRQ_TYPE_LEVEL_HIGH>;
1058                         };
1059
1060                         usdhc1: usdhc@2190000 {
1061                                 compatible = "fsl,imx6q-usdhc";
1062                                 reg = <0x02190000 0x4000>;
1063                                 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
1064                                 clocks = <&clks IMX6QDL_CLK_USDHC1>,
1065                                          <&clks IMX6QDL_CLK_USDHC1>,
1066                                          <&clks IMX6QDL_CLK_USDHC1>;
1067                                 clock-names = "ipg", "ahb", "per";
1068                                 bus-width = <4>;
1069                                 status = "disabled";
1070                         };
1071
1072                         usdhc2: usdhc@2194000 {
1073                                 compatible = "fsl,imx6q-usdhc";
1074                                 reg = <0x02194000 0x4000>;
1075                                 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
1076                                 clocks = <&clks IMX6QDL_CLK_USDHC2>,
1077                                          <&clks IMX6QDL_CLK_USDHC2>,
1078                                          <&clks IMX6QDL_CLK_USDHC2>;
1079                                 clock-names = "ipg", "ahb", "per";
1080                                 bus-width = <4>;
1081                                 status = "disabled";
1082                         };
1083
1084                         usdhc3: usdhc@2198000 {
1085                                 compatible = "fsl,imx6q-usdhc";
1086                                 reg = <0x02198000 0x4000>;
1087                                 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
1088                                 clocks = <&clks IMX6QDL_CLK_USDHC3>,
1089                                          <&clks IMX6QDL_CLK_USDHC3>,
1090                                          <&clks IMX6QDL_CLK_USDHC3>;
1091                                 clock-names = "ipg", "ahb", "per";
1092                                 bus-width = <4>;
1093                                 status = "disabled";
1094                         };
1095
1096                         usdhc4: usdhc@219c000 {
1097                                 compatible = "fsl,imx6q-usdhc";
1098                                 reg = <0x0219c000 0x4000>;
1099                                 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
1100                                 clocks = <&clks IMX6QDL_CLK_USDHC4>,
1101                                          <&clks IMX6QDL_CLK_USDHC4>,
1102                                          <&clks IMX6QDL_CLK_USDHC4>;
1103                                 clock-names = "ipg", "ahb", "per";
1104                                 bus-width = <4>;
1105                                 status = "disabled";
1106                         };
1107
1108                         i2c1: i2c@21a0000 {
1109                                 #address-cells = <1>;
1110                                 #size-cells = <0>;
1111                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
1112                                 reg = <0x021a0000 0x4000>;
1113                                 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
1114                                 clocks = <&clks IMX6QDL_CLK_I2C1>;
1115                                 status = "disabled";
1116                         };
1117
1118                         i2c2: i2c@21a4000 {
1119                                 #address-cells = <1>;
1120                                 #size-cells = <0>;
1121                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
1122                                 reg = <0x021a4000 0x4000>;
1123                                 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
1124                                 clocks = <&clks IMX6QDL_CLK_I2C2>;
1125                                 status = "disabled";
1126                         };
1127
1128                         i2c3: i2c@21a8000 {
1129                                 #address-cells = <1>;
1130                                 #size-cells = <0>;
1131                                 compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
1132                                 reg = <0x021a8000 0x4000>;
1133                                 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
1134                                 clocks = <&clks IMX6QDL_CLK_I2C3>;
1135                                 status = "disabled";
1136                         };
1137
1138                         romcp@21ac000 {
1139                                 reg = <0x021ac000 0x4000>;
1140                         };
1141
1142                         mmdc0: memory-controller@21b0000 { /* MMDC0 */
1143                                 compatible = "fsl,imx6q-mmdc";
1144                                 reg = <0x021b0000 0x4000>;
1145                                 clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
1146                         };
1147
1148                         mmdc1: memory-controller@21b4000 { /* MMDC1 */
1149                                 compatible = "fsl,imx6q-mmdc";
1150                                 reg = <0x021b4000 0x4000>;
1151                                 status = "disabled";
1152                         };
1153
1154                         weim: weim@21b8000 {
1155                                 #address-cells = <2>;
1156                                 #size-cells = <1>;
1157                                 compatible = "fsl,imx6q-weim";
1158                                 reg = <0x021b8000 0x4000>;
1159                                 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
1160                                 clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
1161                                 fsl,weim-cs-gpr = <&gpr>;
1162                                 status = "disabled";
1163                         };
1164
1165                         ocotp: ocotp-ctrl@21bc000 {
1166                                 compatible = "fsl,imx6q-ocotp", "syscon";
1167                                 reg = <0x021bc000 0x4000>;
1168                                 clocks = <&clks IMX6QDL_CLK_IIM>;
1169                                 #address-cells = <1>;
1170                                 #size-cells = <1>;
1171
1172                                 cpu_speed_grade: speed-grade@10 {
1173                                         reg = <0x10 4>;
1174                                 };
1175
1176                                 tempmon_calib: calib@38 {
1177                                         reg = <0x38 4>;
1178                                 };
1179
1180                                 tempmon_temp_grade: temp-grade@20 {
1181                                         reg = <0x20 4>;
1182                                 };
1183                         };
1184
1185                         tzasc@21d0000 { /* TZASC1 */
1186                                 reg = <0x021d0000 0x4000>;
1187                                 interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
1188                         };
1189
1190                         tzasc@21d4000 { /* TZASC2 */
1191                                 reg = <0x021d4000 0x4000>;
1192                                 interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
1193                         };
1194
1195                         audmux: audmux@21d8000 {
1196                                 compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
1197                                 reg = <0x021d8000 0x4000>;
1198                                 status = "disabled";
1199                         };
1200
1201                         mipi_csi: mipi@21dc000 {
1202                                 compatible = "fsl,imx6-mipi-csi2";
1203                                 reg = <0x021dc000 0x4000>;
1204                                 #address-cells = <1>;
1205                                 #size-cells = <0>;
1206                                 interrupts = <0 100 0x04>, <0 101 0x04>;
1207                                 clocks = <&clks IMX6QDL_CLK_HSI_TX>,
1208                                          <&clks IMX6QDL_CLK_VIDEO_27M>,
1209                                          <&clks IMX6QDL_CLK_EIM_PODF>;
1210                                 clock-names = "dphy", "ref", "pix";
1211                                 status = "disabled";
1212                         };
1213
1214                         mipi_dsi: mipi@21e0000 {
1215                                 reg = <0x021e0000 0x4000>;
1216                                 status = "disabled";
1217
1218                                 ports {
1219                                         #address-cells = <1>;
1220                                         #size-cells = <0>;
1221
1222                                         port@0 {
1223                                                 reg = <0>;
1224
1225                                                 mipi_mux_0: endpoint {
1226                                                         remote-endpoint = <&ipu1_di0_mipi>;
1227                                                 };
1228                                         };
1229
1230                                         port@1 {
1231                                                 reg = <1>;
1232
1233                                                 mipi_mux_1: endpoint {
1234                                                         remote-endpoint = <&ipu1_di1_mipi>;
1235                                                 };
1236                                         };
1237                                 };
1238                         };
1239
1240                         vdoa@21e4000 {
1241                                 compatible = "fsl,imx6q-vdoa";
1242                                 reg = <0x021e4000 0x4000>;
1243                                 interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
1244                                 clocks = <&clks IMX6QDL_CLK_VDOA>;
1245                         };
1246
1247                         uart2: serial@21e8000 {
1248                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1249                                 reg = <0x021e8000 0x4000>;
1250                                 interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
1251                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1252                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1253                                 clock-names = "ipg", "per";
1254                                 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
1255                                 dma-names = "rx", "tx";
1256                                 status = "disabled";
1257                         };
1258
1259                         uart3: serial@21ec000 {
1260                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1261                                 reg = <0x021ec000 0x4000>;
1262                                 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
1263                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1264                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1265                                 clock-names = "ipg", "per";
1266                                 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
1267                                 dma-names = "rx", "tx";
1268                                 status = "disabled";
1269                         };
1270
1271                         uart4: serial@21f0000 {
1272                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1273                                 reg = <0x021f0000 0x4000>;
1274                                 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
1275                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1276                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1277                                 clock-names = "ipg", "per";
1278                                 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1279                                 dma-names = "rx", "tx";
1280                                 status = "disabled";
1281                         };
1282
1283                         uart5: serial@21f4000 {
1284                                 compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
1285                                 reg = <0x021f4000 0x4000>;
1286                                 interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
1287                                 clocks = <&clks IMX6QDL_CLK_UART_IPG>,
1288                                          <&clks IMX6QDL_CLK_UART_SERIAL>;
1289                                 clock-names = "ipg", "per";
1290                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1291                                 dma-names = "rx", "tx";
1292                                 status = "disabled";
1293                         };
1294                 };
1295
1296                 ipu1: ipu@2400000 {
1297                         #address-cells = <1>;
1298                         #size-cells = <0>;
1299                         compatible = "fsl,imx6q-ipu";
1300                         reg = <0x02400000 0x400000>;
1301                         interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
1302                                      <0 5 IRQ_TYPE_LEVEL_HIGH>;
1303                         clocks = <&clks IMX6QDL_CLK_IPU1>,
1304                                  <&clks IMX6QDL_CLK_IPU1_DI0>,
1305                                  <&clks IMX6QDL_CLK_IPU1_DI1>;
1306                         clock-names = "bus", "di0", "di1";
1307                         resets = <&src 2>;
1308
1309                         ipu1_csi0: port@0 {
1310                                 reg = <0>;
1311
1312                                 ipu1_csi0_from_ipu1_csi0_mux: endpoint {
1313                                         remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
1314                                 };
1315                         };
1316
1317                         ipu1_csi1: port@1 {
1318                                 reg = <1>;
1319                         };
1320
1321                         ipu1_di0: port@2 {
1322                                 #address-cells = <1>;
1323                                 #size-cells = <0>;
1324                                 reg = <2>;
1325
1326                                 ipu1_di0_disp0: endpoint@0 {
1327                                         reg = <0>;
1328                                 };
1329
1330                                 ipu1_di0_hdmi: endpoint@1 {
1331                                         reg = <1>;
1332                                         remote-endpoint = <&hdmi_mux_0>;
1333                                 };
1334
1335                                 ipu1_di0_mipi: endpoint@2 {
1336                                         reg = <2>;
1337                                         remote-endpoint = <&mipi_mux_0>;
1338                                 };
1339
1340                                 ipu1_di0_lvds0: endpoint@3 {
1341                                         reg = <3>;
1342                                         remote-endpoint = <&lvds0_mux_0>;
1343                                 };
1344
1345                                 ipu1_di0_lvds1: endpoint@4 {
1346                                         reg = <4>;
1347                                         remote-endpoint = <&lvds1_mux_0>;
1348                                 };
1349                         };
1350
1351                         ipu1_di1: port@3 {
1352                                 #address-cells = <1>;
1353                                 #size-cells = <0>;
1354                                 reg = <3>;
1355
1356                                 ipu1_di1_disp1: endpoint@0 {
1357                                         reg = <0>;
1358                                 };
1359
1360                                 ipu1_di1_hdmi: endpoint@1 {
1361                                         reg = <1>;
1362                                         remote-endpoint = <&hdmi_mux_1>;
1363                                 };
1364
1365                                 ipu1_di1_mipi: endpoint@2 {
1366                                         reg = <2>;
1367                                         remote-endpoint = <&mipi_mux_1>;
1368                                 };
1369
1370                                 ipu1_di1_lvds0: endpoint@3 {
1371                                         reg = <3>;
1372                                         remote-endpoint = <&lvds0_mux_1>;
1373                                 };
1374
1375                                 ipu1_di1_lvds1: endpoint@4 {
1376                                         reg = <4>;
1377                                         remote-endpoint = <&lvds1_mux_1>;
1378                                 };
1379                         };
1380                 };
1381         };
1382 };