Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23...
[linux-2.6-microblaze.git] / arch / arm / boot / dts / imx31-lite.dts
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
4
5 /dts-v1/;
6
7 #include "imx31.dtsi"
8
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11
12 / {
13         model = "LogicPD i.MX31 Lite";
14         compatible = "logicpd,imx31-lite", "fsl,imx31";
15
16         chosen {
17                 stdout-path = &uart1;
18         };
19
20         memory@80000000 {
21                 device_type = "memory";
22                 reg = <0x80000000 0x8000000>;
23         };
24
25         leds {
26                 compatible = "gpio-leds";
27
28                 led0 {
29                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
30                 };
31
32                 led1 {
33                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
34                 };
35         };
36 };
37
38 &ata {
39         status = "okay";
40 };
41
42 &nfc {
43         nand-bus-width = <8>;
44         nand-ecc-mode = "hw";
45         nand-on-flash-bbt;
46         status = "okay";
47 };
48
49 &sdhci1 {
50         bus-width = <4>;
51         cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
52         wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
53         status = "okay";
54 };
55
56 &spi2 {
57         status = "okay";
58
59         pmic@0 {
60                 compatible = "fsl,mc13783";
61                 reg = <0>;
62                 spi-cs-high;
63                 spi-max-frequency = <1000000>;
64                 interrupt-parent = <&gpio1>;
65                 interrupts = <3 IRQ_TYPE_EDGE_RISING>;
66
67                 fsl,mc13xxx-uses-adc;
68                 fsl,mc13xxx-uses-rtc;
69
70                 regulators {
71                         sw1a {          /* QVCC */
72                                 regulator-min-microvolt = <1200000>;
73                                 regulator-max-microvolt = <1500000>;
74                                 regulator-always-on;
75                                 regulator-boot-on;
76                         };
77
78                         sw1b {          /* QVCC */
79                                 regulator-min-microvolt = <1200000>;
80                                 regulator-max-microvolt = <1500000>;
81                                 regulator-always-on;
82                                 regulator-boot-on;
83                         };
84
85                         sw2a {          /* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
86                                 regulator-min-microvolt = <1800000>;
87                                 regulator-max-microvolt = <1800000>;
88                                 regulator-always-on;
89                                 regulator-boot-on;
90                         };
91
92                         sw2b {          /* NVCC10 */
93                                 regulator-min-microvolt = <1800000>;
94                                 regulator-max-microvolt = <1800000>;
95                                 regulator-always-on;
96                                 regulator-boot-on;
97                         };
98
99                         violo {         /* NVCC1 and NVCC7 */
100                                 regulator-min-microvolt = <1800000>;
101                                 regulator-max-microvolt = <1800000>;
102                                 regulator-always-on;
103                                 regulator-boot-on;
104                         };
105
106                         viohi {         /* VIOHI */
107                                 regulator-min-microvolt = <2775000>;
108                                 regulator-max-microvolt = <2775000>;
109                                 regulator-always-on;
110                                 regulator-boot-on;
111                         };
112
113                         vaudio {        /* VAUDIO */
114                                 regulator-min-microvolt = <2775000>;
115                                 regulator-max-microvolt = <2775000>;
116                         };
117
118                         vcam {          /* NVCC4 */
119                                 regulator-min-microvolt = <2800000>;
120                                 regulator-max-microvolt = <2800000>;
121                         };
122
123                         vgen {          /* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
124                                 regulator-min-microvolt = <2775000>;
125                                 regulator-max-microvolt = <2775000>;
126                                 regulator-always-on;
127                                 regulator-boot-on;
128                         };
129
130                         vmmc2 {         /* NVCC3 */
131                                 regulator-min-microvolt = <1600000>;
132                                 regulator-max-microvolt = <3000000>;
133                                 regulator-always-on;
134                                 regulator-boot-on;
135                         };
136                 };
137         };
138 };
139
140 &uart1 {
141         uart-has-rtscts;
142         status = "okay";
143 };
144
145 /* Routed to the extension board */
146 &uart2 {
147         uart-has-rtscts;
148         status = "okay";
149 };
150
151 /* Routed to the extension board */
152 &uart3 {
153         uart-has-rtscts;
154         status = "okay";
155 };
156
157 &weim {
158         status = "okay";
159
160         nor@0,0 {
161                 compatible = "cfi-flash";
162                 reg = <0 0x0 0x200000>;
163                 bank-width = <2>;
164                 linux,mtd-name = "physmap-flash.0";
165                 fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
166         };
167
168         ethernet@4,0 {
169                 compatible = "smsc,lan9117", "smsc,lan9115";
170                 reg = <4 0x0 0x100>;
171                 interrupt-parent = <&gpio1>;
172                 interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
173                 phy-mode = "mii";
174                 reg-io-width = <2>;
175                 smsc,irq-push-pull;
176                 fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
177         };
178 };