2 * Samsung's Exynos4412 based Trats 2 board device tree source
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * Device tree source file for Samsung's Trats 2 board which is based on
8 * Samsung's Exynos4412 SoC.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
16 #include "exynos4412.dtsi"
17 #include "exynos4412-ppmu-common.dtsi"
18 #include <dt-bindings/gpio/gpio.h>
19 #include <dt-bindings/interrupt-controller/irq.h>
20 #include <dt-bindings/clock/maxim,max77686.h>
21 #include <dt-bindings/pinctrl/samsung.h>
24 model = "Samsung Trats 2 based on Exynos4412";
25 compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
30 i2c11 = &i2c_max77693;
31 i2c12 = &i2c_max77693_fuel;
35 device_type = "memory";
36 reg = <0x40000000 0x40000000>;
40 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
41 stdout-path = &serial_2;
45 compatible = "samsung,secure-firmware";
46 reg = <0x0204F000 0x1000>;
51 compatible = "samsung,clock-xxti", "fixed-clock";
52 clock-frequency = <0>;
56 compatible = "samsung,clock-xusbxti", "fixed-clock";
57 clock-frequency = <24000000>;
62 compatible = "simple-bus";
66 cam_io_reg: voltage-regulator-1 {
67 compatible = "regulator-fixed";
68 regulator-name = "CAM_SENSOR_A";
69 regulator-min-microvolt = <2800000>;
70 regulator-max-microvolt = <2800000>;
71 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
75 lcd_vdd3_reg: voltage-regulator-2 {
76 compatible = "regulator-fixed";
77 regulator-name = "LCD_VDD_2.2V";
78 regulator-min-microvolt = <2200000>;
79 regulator-max-microvolt = <2200000>;
80 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
84 cam_af_reg: voltage-regulator-3 {
85 compatible = "regulator-fixed";
86 regulator-name = "CAM_AF";
87 regulator-min-microvolt = <2800000>;
88 regulator-max-microvolt = <2800000>;
89 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
93 ps_als_reg: voltage-regulator-5 {
94 compatible = "regulator-fixed";
95 regulator-name = "LED_A_3.0V";
96 regulator-min-microvolt = <3000000>;
97 regulator-max-microvolt = <3000000>;
98 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
102 vsil12: voltage-regulator-6 {
103 compatible = "regulator-fixed";
104 regulator-name = "VSIL_1.2V";
105 regulator-min-microvolt = <1200000>;
106 regulator-max-microvolt = <1200000>;
107 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
109 vin-supply = <&buck7_reg>;
112 vcc33mhl: voltage-regulator-7 {
113 compatible = "regulator-fixed";
114 regulator-name = "VCC_3.3_MHL";
115 regulator-min-microvolt = <3300000>;
116 regulator-max-microvolt = <3300000>;
117 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
121 vcc18mhl: voltage-regulator-8 {
122 compatible = "regulator-fixed";
123 regulator-name = "VCC_1.8_MHL";
124 regulator-min-microvolt = <1800000>;
125 regulator-max-microvolt = <1800000>;
126 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
132 compatible = "gpio-keys";
135 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
137 label = "volume down";
138 debounce-interval = <10>;
142 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
145 debounce-interval = <10>;
149 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
152 debounce-interval = <10>;
157 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
160 debounce-inteval = <10>;
165 i2c_max77693: i2c-gpio-1 {
166 compatible = "i2c-gpio";
167 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
168 i2c-gpio,delay-us = <2>;
169 #address-cells = <1>;
174 compatible = "maxim,max77693";
175 interrupt-parent = <&gpx1>;
176 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
180 esafeout1_reg: ESAFEOUT1 {
181 regulator-name = "ESAFEOUT1";
183 esafeout2_reg: ESAFEOUT2 {
184 regulator-name = "ESAFEOUT2";
186 charger_reg: CHARGER {
187 regulator-name = "CHARGER";
188 regulator-min-microamp = <60000>;
189 regulator-max-microamp = <2580000>;
194 compatible = "maxim,max77693-haptic";
195 haptic-supply = <&ldo26_reg>;
196 pwms = <&pwm 0 38022 0>;
200 compatible = "maxim,max77693-charger";
202 maxim,constant-microvolt = <4350000>;
203 maxim,min-system-microvolt = <3600000>;
204 maxim,thermal-regulation-celsius = <100>;
205 maxim,battery-overcurrent-microamp = <3500000>;
206 maxim,charge-input-threshold-microvolt = <4300000>;
211 i2c_max77693_fuel: i2c-gpio-3 {
212 compatible = "i2c-gpio";
213 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
214 i2c-gpio,delay-us = <2>;
215 #address-cells = <1>;
219 max77693-fuel-gauge@36 {
220 compatible = "maxim,max17047";
221 interrupt-parent = <&gpx2>;
222 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
225 maxim,over-heat-temp = <700>;
226 maxim,over-volt = <4500>;
230 i2c_ak8975: i2c-gpio-0 {
231 compatible = "i2c-gpio";
232 gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
233 i2c-gpio,delay-us = <2>;
234 #address-cells = <1>;
239 compatible = "asahi-kasei,ak8975";
241 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
245 i2c_cm36651: i2c-gpio-2 {
246 compatible = "i2c-gpio";
247 gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
248 i2c-gpio,delay-us = <2>;
249 #address-cells = <1>;
253 compatible = "capella,cm36651";
255 interrupt-parent = <&gpx0>;
256 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
257 vled-supply = <&ps_als_reg>;
262 compatible = "i2c-gpio";
263 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
264 i2c-gpio,delay-us = <100>;
265 #address-cells = <1>;
268 pinctrl-0 = <&i2c_mhl_bus>;
269 pinctrl-names = "default";
272 sii9234: hdmi-bridge@39 {
273 compatible = "sil,sii9234";
274 avcc33-supply = <&vcc33mhl>;
275 iovcc18-supply = <&vcc18mhl>;
276 avcc12-supply = <&vsil12>;
277 cvcc12-supply = <&vsil12>;
278 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
279 interrupt-parent = <&gpf3>;
280 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
284 mhl_to_hdmi: endpoint {
285 remote-endpoint = <&hdmi_to_mhl>;
292 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
293 pinctrl-names = "default";
295 assigned-clocks = <&clock CLK_MOUT_CAM0>,
296 <&clock CLK_MOUT_CAM1>;
297 assigned-clock-parents = <&clock CLK_XUSBXTI>,
298 <&clock CLK_XUSBXTI>;
304 compatible = "samsung,trats2-audio";
305 samsung,i2s-controller = <&i2s0>;
306 samsung,model = "Trats2";
307 samsung,audio-codec = <&wm1811>;
308 samsung,audio-routing =
316 compatible = "murata,ncp15wb473";
317 pullup-uv = <1800000>; /* VCC_1.8V_AP */
318 pullup-ohm = <100000>; /* 100K */
319 pulldown-ohm = <100000>; /* 100K */
320 io-channels = <&adc 1>; /* AP temperature */
324 compatible = "murata,ncp15wb473";
325 pullup-uv = <1800000>; /* VCC_1.8V_AP */
326 pullup-ohm = <100000>; /* 100K */
327 pulldown-ohm = <100000>; /* 100K */
328 io-channels = <&adc 2>; /* Battery temperature */
332 cpu_thermal: cpu-thermal {
335 /* Corresponds to 800MHz at freq_table */
336 cooling-device = <&cpu0 7 7>;
339 /* Corresponds to 200MHz at freq_table */
340 cooling-device = <&cpu0 13 13>;
348 vdd-supply = <&ldo3_reg>;
353 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
354 vdd-supply = <&buck1_reg>;
359 devfreq = <&bus_dmc>;
364 devfreq = <&bus_dmc>;
369 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
370 vdd-supply = <&buck3_reg>;
375 devfreq = <&bus_leftbus>;
380 devfreq = <&bus_leftbus>;
385 devfreq = <&bus_leftbus>;
390 devfreq = <&bus_leftbus>;
395 devfreq = <&bus_leftbus>;
400 cpu0-supply = <&buck2_reg>;
405 vddcore-supply = <&ldo8_reg>;
406 vddio-supply = <&ldo10_reg>;
407 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
408 <&clock CLK_SCLK_CSIS0>;
409 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
410 assigned-clock-rates = <0>, <176000000>;
412 /* Camera C (3) MIPI CSI-2 (CSIS0) */
416 remote-endpoint = <&s5c73m3_ep>;
417 data-lanes = <1 2 3 4>;
418 samsung,csis-hs-settle = <12>;
425 vddcore-supply = <&ldo8_reg>;
426 vddio-supply = <&ldo10_reg>;
427 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
428 <&clock CLK_SCLK_CSIS1>;
429 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
430 assigned-clock-rates = <0>, <176000000>;
432 /* Camera D (4) MIPI CSI-2 (CSIS1) */
436 remote-endpoint = <&is_s5k6a3_ep>;
438 samsung,csis-hs-settle = <18>;
445 vddcore-supply = <&ldo8_reg>;
446 vddio-supply = <&ldo10_reg>;
447 samsung,burst-clock-frequency = <500000000>;
448 samsung,esc-clock-frequency = <20000000>;
449 samsung,pll-clock-frequency = <24000000>;
453 compatible = "samsung,s6e8aa0";
455 vdd3-supply = <&lcd_vdd3_reg>;
456 vci-supply = <&ldo25_reg>;
457 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
458 power-on-delay= <50>;
463 panel-width-mm = <58>;
464 panel-height-mm = <103>;
468 clock-frequency = <57153600>;
483 vbus-supply = <&esafeout1_reg>;
489 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
490 <&clock CLK_SCLK_FIMC0>;
491 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
492 assigned-clock-rates = <0>, <176000000>;
497 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
498 <&clock CLK_SCLK_FIMC1>;
499 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
500 assigned-clock-rates = <0>, <176000000>;
505 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
506 <&clock CLK_SCLK_FIMC2>;
507 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
508 assigned-clock-rates = <0>, <176000000>;
513 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
514 <&clock CLK_SCLK_FIMC3>;
515 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
516 assigned-clock-rates = <0>, <176000000>;
520 pinctrl-0 = <&fimc_is_uart>;
521 pinctrl-names = "default";
524 i2c1_isp: i2c-isp@12140000 {
525 pinctrl-0 = <&fimc_is_i2c1>;
526 pinctrl-names = "default";
529 compatible = "samsung,s5k6a3";
531 svdda-supply = <&cam_io_reg>;
532 svddio-supply = <&ldo19_reg>;
533 afvdd-supply = <&ldo19_reg>;
534 clock-frequency = <24000000>;
536 clocks = <&camera 1>;
537 clock-names = "extclk";
538 samsung,camclk-out = <1>;
539 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
542 is_s5k6a3_ep: endpoint {
543 remote-endpoint = <&csis1_ep>;
564 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
565 pinctrl-names = "default";
566 pinctrl-0 = <&hdmi_hpd>;
567 vdd-supply = <&ldo3_reg>;
568 vdd_osc-supply = <&ldo4_reg>;
569 vdd_pll-supply = <&ldo3_reg>;
574 #address-cells = <1>;
579 hdmi_to_mhl: endpoint {
580 remote-endpoint = <&mhl_to_hdmi>;
587 vusb_d-supply = <&ldo15_reg>;
588 vusb_a-supply = <&ldo12_reg>;
589 dr_mode = "peripheral";
594 samsung,i2c-sda-delay = <100>;
595 samsung,i2c-slave-addr = <0x10>;
596 samsung,i2c-max-bus-freq = <400000>;
597 pinctrl-0 = <&i2c0_bus>;
598 pinctrl-names = "default";
602 compatible = "samsung,s5c73m3";
604 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
605 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
606 vdd-int-supply = <&buck9_reg>;
607 vddio-cis-supply = <&ldo9_reg>;
608 vdda-supply = <&ldo17_reg>;
609 vddio-host-supply = <&ldo18_reg>;
610 vdd-af-supply = <&cam_af_reg>;
611 vdd-reg-supply = <&cam_io_reg>;
612 clock-frequency = <24000000>;
614 clocks = <&camera 0>;
615 clock-names = "cis_extclk";
617 s5c73m3_ep: endpoint {
618 remote-endpoint = <&csis0_ep>;
619 data-lanes = <1 2 3 4>;
626 samsung,i2c-sda-delay = <100>;
627 samsung,i2c-slave-addr = <0x10>;
628 samsung,i2c-max-bus-freq = <400000>;
629 pinctrl-0 = <&i2c3_bus>;
630 pinctrl-names = "default";
633 mms114-touchscreen@48 {
634 compatible = "melfas,mms114";
636 interrupt-parent = <&gpm2>;
637 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
640 avdd-supply = <&ldo23_reg>;
641 vdd-supply = <&ldo24_reg>;
646 samsung,i2c-sda-delay = <100>;
647 samsung,i2c-slave-addr = <0x10>;
648 samsung,i2c-max-bus-freq = <100000>;
649 pinctrl-0 = <&i2c4_bus>;
650 pinctrl-names = "default";
654 compatible = "wlf,wm1811";
656 clocks = <&pmu_system_controller 0>;
657 clock-names = "MCLK1";
658 DCVDD-supply = <&ldo3_reg>;
659 DBVDD1-supply = <&ldo3_reg>;
660 wlf,ldo1ena = <&gpj0 4 0>;
669 samsung,i2c-sda-delay = <100>;
670 samsung,i2c-slave-addr = <0x10>;
671 samsung,i2c-max-bus-freq = <100000>;
672 pinctrl-0 = <&i2c7_bus>;
673 pinctrl-names = "default";
676 max77686: max77686_pmic@9 {
677 compatible = "maxim,max77686";
678 interrupt-parent = <&gpx0>;
679 interrupts = <7 IRQ_TYPE_NONE>;
685 regulator-name = "VALIVE_1.0V_AP";
686 regulator-min-microvolt = <1000000>;
687 regulator-max-microvolt = <1000000>;
692 regulator-name = "VM1M2_1.2V_AP";
693 regulator-min-microvolt = <1200000>;
694 regulator-max-microvolt = <1200000>;
696 regulator-state-mem {
697 regulator-on-in-suspend;
702 regulator-name = "VCC_1.8V_AP";
703 regulator-min-microvolt = <1800000>;
704 regulator-max-microvolt = <1800000>;
709 regulator-name = "VCC_2.8V_AP";
710 regulator-min-microvolt = <2800000>;
711 regulator-max-microvolt = <2800000>;
716 regulator-name = "VCC_1.8V_IO";
717 regulator-min-microvolt = <1800000>;
718 regulator-max-microvolt = <1800000>;
723 regulator-name = "VMPLL_1.0V_AP";
724 regulator-min-microvolt = <1000000>;
725 regulator-max-microvolt = <1000000>;
727 regulator-state-mem {
728 regulator-on-in-suspend;
733 regulator-name = "VPLL_1.0V_AP";
734 regulator-min-microvolt = <1000000>;
735 regulator-max-microvolt = <1000000>;
737 regulator-state-mem {
738 regulator-on-in-suspend;
743 regulator-name = "VMIPI_1.0V";
744 regulator-min-microvolt = <1000000>;
745 regulator-max-microvolt = <1000000>;
746 regulator-state-mem {
747 regulator-off-in-suspend;
752 regulator-name = "CAM_ISP_MIPI_1.2V";
753 regulator-min-microvolt = <1200000>;
754 regulator-max-microvolt = <1200000>;
758 regulator-name = "VMIPI_1.8V";
759 regulator-min-microvolt = <1800000>;
760 regulator-max-microvolt = <1800000>;
761 regulator-state-mem {
762 regulator-off-in-suspend;
767 regulator-name = "VABB1_1.95V";
768 regulator-min-microvolt = <1950000>;
769 regulator-max-microvolt = <1950000>;
771 regulator-state-mem {
772 regulator-off-in-suspend;
777 regulator-name = "VUOTG_3.0V";
778 regulator-min-microvolt = <3000000>;
779 regulator-max-microvolt = <3000000>;
780 regulator-state-mem {
781 regulator-off-in-suspend;
786 regulator-name = "NFC_AVDD_1.8V";
787 regulator-min-microvolt = <1800000>;
788 regulator-max-microvolt = <1800000>;
792 regulator-name = "VABB2_1.95V";
793 regulator-min-microvolt = <1950000>;
794 regulator-max-microvolt = <1950000>;
796 regulator-state-mem {
797 regulator-off-in-suspend;
802 regulator-name = "VHSIC_1.0V";
803 regulator-min-microvolt = <1000000>;
804 regulator-max-microvolt = <1000000>;
805 regulator-state-mem {
806 regulator-on-in-suspend;
811 regulator-name = "VHSIC_1.8V";
812 regulator-min-microvolt = <1800000>;
813 regulator-max-microvolt = <1800000>;
814 regulator-state-mem {
815 regulator-on-in-suspend;
820 regulator-name = "CAM_SENSOR_CORE_1.2V";
821 regulator-min-microvolt = <1200000>;
822 regulator-max-microvolt = <1200000>;
826 regulator-name = "CAM_ISP_SEN_IO_1.8V";
827 regulator-min-microvolt = <1800000>;
828 regulator-max-microvolt = <1800000>;
832 regulator-name = "VT_CAM_1.8V";
833 regulator-min-microvolt = <1800000>;
834 regulator-max-microvolt = <1800000>;
838 regulator-name = "VDDQ_PRE_1.8V";
839 regulator-min-microvolt = <1800000>;
840 regulator-max-microvolt = <1800000>;
844 regulator-name = "VTF_2.8V";
845 regulator-min-microvolt = <2800000>;
846 regulator-max-microvolt = <2800000>;
847 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
851 regulator-name = "VMEM_VDD_2.8V";
852 regulator-min-microvolt = <2800000>;
853 regulator-max-microvolt = <2800000>;
854 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
858 regulator-name = "TSP_AVDD_3.3V";
859 regulator-min-microvolt = <3300000>;
860 regulator-max-microvolt = <3300000>;
864 regulator-name = "TSP_VDD_1.8V";
865 regulator-min-microvolt = <1800000>;
866 regulator-max-microvolt = <1800000>;
870 regulator-name = "LCD_VCC_3.3V";
871 regulator-min-microvolt = <2800000>;
872 regulator-max-microvolt = <2800000>;
876 regulator-name = "MOTOR_VCC_3.0V";
877 regulator-min-microvolt = <3000000>;
878 regulator-max-microvolt = <3000000>;
882 regulator-name = "vdd_mif";
883 regulator-min-microvolt = <850000>;
884 regulator-max-microvolt = <1100000>;
887 regulator-state-mem {
888 regulator-off-in-suspend;
893 regulator-name = "vdd_arm";
894 regulator-min-microvolt = <850000>;
895 regulator-max-microvolt = <1500000>;
898 regulator-state-mem {
899 regulator-on-in-suspend;
904 regulator-name = "vdd_int";
905 regulator-min-microvolt = <850000>;
906 regulator-max-microvolt = <1150000>;
909 regulator-state-mem {
910 regulator-off-in-suspend;
915 regulator-name = "vdd_g3d";
916 regulator-min-microvolt = <850000>;
917 regulator-max-microvolt = <1150000>;
919 regulator-state-mem {
920 regulator-off-in-suspend;
925 regulator-name = "VMEM_1.2V_AP";
926 regulator-min-microvolt = <1200000>;
927 regulator-max-microvolt = <1200000>;
932 regulator-name = "VCC_SUB_1.35V";
933 regulator-min-microvolt = <1350000>;
934 regulator-max-microvolt = <1350000>;
939 regulator-name = "VCC_SUB_2.0V";
940 regulator-min-microvolt = <2000000>;
941 regulator-max-microvolt = <2000000>;
946 regulator-name = "VMEM_VDDF_3.0V";
947 regulator-min-microvolt = <2850000>;
948 regulator-max-microvolt = <2850000>;
949 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
953 regulator-name = "CAM_ISP_CORE_1.2V";
954 regulator-min-microvolt = <1000000>;
955 regulator-max-microvolt = <1200000>;
956 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
967 pinctrl-0 = <&i2s0_bus>;
968 pinctrl-names = "default";
979 card-detect-delay = <200>;
980 vmmc-supply = <&ldo22_reg>;
981 clock-frequency = <400000000>;
982 samsung,dw-mshc-ciu-div = <0>;
983 samsung,dw-mshc-sdr-timing = <2 3>;
984 samsung,dw-mshc-ddr-timing = <1 2>;
985 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
986 pinctrl-names = "default";
992 &pmu_system_controller {
993 assigned-clocks = <&pmu_system_controller 0>;
994 assigned-clock-parents = <&clock CLK_XUSBXTI>;
998 pinctrl-names = "default";
999 pinctrl-0 = <&sleep0>;
1002 samsung,pins = "gpf3-5";
1003 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1006 i2c_mhl_bus: i2c-mhl-bus {
1007 samsung,pins = "gpf0-4", "gpf0-6";
1008 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
1009 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1010 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1013 sleep0: sleep-states {
1014 PIN_SLP(gpa0-0, INPUT, NONE);
1015 PIN_SLP(gpa0-1, OUT0, NONE);
1016 PIN_SLP(gpa0-2, INPUT, NONE);
1017 PIN_SLP(gpa0-3, INPUT, UP);
1018 PIN_SLP(gpa0-4, INPUT, NONE);
1019 PIN_SLP(gpa0-5, INPUT, DOWN);
1020 PIN_SLP(gpa0-6, INPUT, DOWN);
1021 PIN_SLP(gpa0-7, INPUT, UP);
1023 PIN_SLP(gpa1-0, INPUT, DOWN);
1024 PIN_SLP(gpa1-1, INPUT, DOWN);
1025 PIN_SLP(gpa1-2, INPUT, DOWN);
1026 PIN_SLP(gpa1-3, INPUT, DOWN);
1027 PIN_SLP(gpa1-4, INPUT, DOWN);
1028 PIN_SLP(gpa1-5, INPUT, DOWN);
1030 PIN_SLP(gpb-0, INPUT, NONE);
1031 PIN_SLP(gpb-1, INPUT, NONE);
1032 PIN_SLP(gpb-2, INPUT, NONE);
1033 PIN_SLP(gpb-3, INPUT, NONE);
1034 PIN_SLP(gpb-4, INPUT, DOWN);
1035 PIN_SLP(gpb-5, INPUT, UP);
1036 PIN_SLP(gpb-6, INPUT, DOWN);
1037 PIN_SLP(gpb-7, INPUT, DOWN);
1039 PIN_SLP(gpc0-0, INPUT, DOWN);
1040 PIN_SLP(gpc0-1, INPUT, DOWN);
1041 PIN_SLP(gpc0-2, INPUT, DOWN);
1042 PIN_SLP(gpc0-3, INPUT, DOWN);
1043 PIN_SLP(gpc0-4, INPUT, DOWN);
1045 PIN_SLP(gpc1-0, INPUT, NONE);
1046 PIN_SLP(gpc1-1, PREV, NONE);
1047 PIN_SLP(gpc1-2, INPUT, NONE);
1048 PIN_SLP(gpc1-3, INPUT, NONE);
1049 PIN_SLP(gpc1-4, INPUT, NONE);
1051 PIN_SLP(gpd0-0, INPUT, DOWN);
1052 PIN_SLP(gpd0-1, INPUT, DOWN);
1053 PIN_SLP(gpd0-2, INPUT, NONE);
1054 PIN_SLP(gpd0-3, INPUT, NONE);
1056 PIN_SLP(gpd1-0, INPUT, DOWN);
1057 PIN_SLP(gpd1-1, INPUT, DOWN);
1058 PIN_SLP(gpd1-2, INPUT, NONE);
1059 PIN_SLP(gpd1-3, INPUT, NONE);
1061 PIN_SLP(gpf0-0, INPUT, NONE);
1062 PIN_SLP(gpf0-1, INPUT, NONE);
1063 PIN_SLP(gpf0-2, INPUT, DOWN);
1064 PIN_SLP(gpf0-3, INPUT, DOWN);
1065 PIN_SLP(gpf0-4, INPUT, NONE);
1066 PIN_SLP(gpf0-5, INPUT, DOWN);
1067 PIN_SLP(gpf0-6, INPUT, NONE);
1068 PIN_SLP(gpf0-7, INPUT, DOWN);
1070 PIN_SLP(gpf1-0, INPUT, DOWN);
1071 PIN_SLP(gpf1-1, INPUT, DOWN);
1072 PIN_SLP(gpf1-2, INPUT, DOWN);
1073 PIN_SLP(gpf1-3, INPUT, DOWN);
1074 PIN_SLP(gpf1-4, INPUT, NONE);
1075 PIN_SLP(gpf1-5, INPUT, NONE);
1076 PIN_SLP(gpf1-6, INPUT, DOWN);
1077 PIN_SLP(gpf1-7, PREV, NONE);
1079 PIN_SLP(gpf2-0, PREV, NONE);
1080 PIN_SLP(gpf2-1, INPUT, DOWN);
1081 PIN_SLP(gpf2-2, INPUT, DOWN);
1082 PIN_SLP(gpf2-3, INPUT, DOWN);
1083 PIN_SLP(gpf2-4, INPUT, DOWN);
1084 PIN_SLP(gpf2-5, INPUT, DOWN);
1085 PIN_SLP(gpf2-6, INPUT, NONE);
1086 PIN_SLP(gpf2-7, INPUT, NONE);
1088 PIN_SLP(gpf3-0, INPUT, NONE);
1089 PIN_SLP(gpf3-1, PREV, NONE);
1090 PIN_SLP(gpf3-2, PREV, NONE);
1091 PIN_SLP(gpf3-3, PREV, NONE);
1092 PIN_SLP(gpf3-4, OUT1, NONE);
1093 PIN_SLP(gpf3-5, INPUT, DOWN);
1095 PIN_SLP(gpj0-0, PREV, NONE);
1096 PIN_SLP(gpj0-1, PREV, NONE);
1097 PIN_SLP(gpj0-2, PREV, NONE);
1098 PIN_SLP(gpj0-3, INPUT, DOWN);
1099 PIN_SLP(gpj0-4, PREV, NONE);
1100 PIN_SLP(gpj0-5, PREV, NONE);
1101 PIN_SLP(gpj0-6, INPUT, DOWN);
1102 PIN_SLP(gpj0-7, INPUT, DOWN);
1104 PIN_SLP(gpj1-0, INPUT, DOWN);
1105 PIN_SLP(gpj1-1, PREV, NONE);
1106 PIN_SLP(gpj1-2, PREV, NONE);
1107 PIN_SLP(gpj1-3, INPUT, DOWN);
1108 PIN_SLP(gpj1-4, INPUT, DOWN);
1113 pinctrl-names = "default";
1114 pinctrl-0 = <&sleep1>;
1116 hdmi_hpd: hdmi-hpd {
1117 samsung,pins = "gpx3-7";
1118 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1121 sleep1: sleep-states {
1122 PIN_SLP(gpk0-0, PREV, NONE);
1123 PIN_SLP(gpk0-1, PREV, NONE);
1124 PIN_SLP(gpk0-2, OUT0, NONE);
1125 PIN_SLP(gpk0-3, PREV, NONE);
1126 PIN_SLP(gpk0-4, PREV, NONE);
1127 PIN_SLP(gpk0-5, PREV, NONE);
1128 PIN_SLP(gpk0-6, PREV, NONE);
1130 PIN_SLP(gpk1-0, INPUT, DOWN);
1131 PIN_SLP(gpk1-1, INPUT, DOWN);
1132 PIN_SLP(gpk1-2, INPUT, DOWN);
1133 PIN_SLP(gpk1-3, PREV, NONE);
1134 PIN_SLP(gpk1-4, PREV, NONE);
1135 PIN_SLP(gpk1-5, PREV, NONE);
1136 PIN_SLP(gpk1-6, PREV, NONE);
1138 PIN_SLP(gpk2-0, INPUT, DOWN);
1139 PIN_SLP(gpk2-1, INPUT, DOWN);
1140 PIN_SLP(gpk2-2, INPUT, DOWN);
1141 PIN_SLP(gpk2-3, INPUT, DOWN);
1142 PIN_SLP(gpk2-4, INPUT, DOWN);
1143 PIN_SLP(gpk2-5, INPUT, DOWN);
1144 PIN_SLP(gpk2-6, INPUT, DOWN);
1146 PIN_SLP(gpk3-0, OUT0, NONE);
1147 PIN_SLP(gpk3-1, INPUT, NONE);
1148 PIN_SLP(gpk3-2, INPUT, DOWN);
1149 PIN_SLP(gpk3-3, INPUT, NONE);
1150 PIN_SLP(gpk3-4, INPUT, NONE);
1151 PIN_SLP(gpk3-5, INPUT, NONE);
1152 PIN_SLP(gpk3-6, INPUT, NONE);
1154 PIN_SLP(gpl0-0, INPUT, DOWN);
1155 PIN_SLP(gpl0-1, INPUT, DOWN);
1156 PIN_SLP(gpl0-2, INPUT, DOWN);
1157 PIN_SLP(gpl0-3, INPUT, DOWN);
1158 PIN_SLP(gpl0-4, PREV, NONE);
1159 PIN_SLP(gpl0-6, PREV, NONE);
1161 PIN_SLP(gpl1-0, INPUT, DOWN);
1162 PIN_SLP(gpl1-1, INPUT, DOWN);
1163 PIN_SLP(gpl2-0, INPUT, DOWN);
1164 PIN_SLP(gpl2-1, INPUT, DOWN);
1165 PIN_SLP(gpl2-2, INPUT, DOWN);
1166 PIN_SLP(gpl2-3, INPUT, DOWN);
1167 PIN_SLP(gpl2-4, INPUT, DOWN);
1168 PIN_SLP(gpl2-5, INPUT, DOWN);
1169 PIN_SLP(gpl2-6, PREV, NONE);
1170 PIN_SLP(gpl2-7, INPUT, DOWN);
1172 PIN_SLP(gpm0-0, INPUT, DOWN);
1173 PIN_SLP(gpm0-1, INPUT, DOWN);
1174 PIN_SLP(gpm0-2, INPUT, DOWN);
1175 PIN_SLP(gpm0-3, INPUT, DOWN);
1176 PIN_SLP(gpm0-4, INPUT, DOWN);
1177 PIN_SLP(gpm0-5, INPUT, DOWN);
1178 PIN_SLP(gpm0-6, INPUT, DOWN);
1179 PIN_SLP(gpm0-7, INPUT, DOWN);
1181 PIN_SLP(gpm1-0, INPUT, DOWN);
1182 PIN_SLP(gpm1-1, INPUT, DOWN);
1183 PIN_SLP(gpm1-2, INPUT, NONE);
1184 PIN_SLP(gpm1-3, INPUT, NONE);
1185 PIN_SLP(gpm1-4, INPUT, NONE);
1186 PIN_SLP(gpm1-5, INPUT, NONE);
1187 PIN_SLP(gpm1-6, INPUT, DOWN);
1189 PIN_SLP(gpm2-0, INPUT, NONE);
1190 PIN_SLP(gpm2-1, INPUT, NONE);
1191 PIN_SLP(gpm2-2, INPUT, DOWN);
1192 PIN_SLP(gpm2-3, INPUT, DOWN);
1193 PIN_SLP(gpm2-4, INPUT, DOWN);
1195 PIN_SLP(gpm3-0, PREV, NONE);
1196 PIN_SLP(gpm3-1, PREV, NONE);
1197 PIN_SLP(gpm3-2, PREV, NONE);
1198 PIN_SLP(gpm3-3, OUT1, NONE);
1199 PIN_SLP(gpm3-4, INPUT, DOWN);
1200 PIN_SLP(gpm3-5, INPUT, DOWN);
1201 PIN_SLP(gpm3-6, INPUT, DOWN);
1202 PIN_SLP(gpm3-7, INPUT, DOWN);
1204 PIN_SLP(gpm4-0, INPUT, DOWN);
1205 PIN_SLP(gpm4-1, INPUT, DOWN);
1206 PIN_SLP(gpm4-2, INPUT, DOWN);
1207 PIN_SLP(gpm4-3, INPUT, DOWN);
1208 PIN_SLP(gpm4-4, INPUT, DOWN);
1209 PIN_SLP(gpm4-5, INPUT, DOWN);
1210 PIN_SLP(gpm4-6, INPUT, DOWN);
1211 PIN_SLP(gpm4-7, INPUT, DOWN);
1213 PIN_SLP(gpy0-0, INPUT, DOWN);
1214 PIN_SLP(gpy0-1, INPUT, DOWN);
1215 PIN_SLP(gpy0-2, INPUT, DOWN);
1216 PIN_SLP(gpy0-3, INPUT, DOWN);
1217 PIN_SLP(gpy0-4, INPUT, DOWN);
1218 PIN_SLP(gpy0-5, INPUT, DOWN);
1220 PIN_SLP(gpy1-0, INPUT, DOWN);
1221 PIN_SLP(gpy1-1, INPUT, DOWN);
1222 PIN_SLP(gpy1-2, INPUT, DOWN);
1223 PIN_SLP(gpy1-3, INPUT, DOWN);
1225 PIN_SLP(gpy2-0, PREV, NONE);
1226 PIN_SLP(gpy2-1, INPUT, DOWN);
1227 PIN_SLP(gpy2-2, INPUT, NONE);
1228 PIN_SLP(gpy2-3, INPUT, NONE);
1229 PIN_SLP(gpy2-4, INPUT, NONE);
1230 PIN_SLP(gpy2-5, INPUT, NONE);
1232 PIN_SLP(gpy3-0, INPUT, DOWN);
1233 PIN_SLP(gpy3-1, INPUT, DOWN);
1234 PIN_SLP(gpy3-2, INPUT, DOWN);
1235 PIN_SLP(gpy3-3, INPUT, DOWN);
1236 PIN_SLP(gpy3-4, INPUT, DOWN);
1237 PIN_SLP(gpy3-5, INPUT, DOWN);
1238 PIN_SLP(gpy3-6, INPUT, DOWN);
1239 PIN_SLP(gpy3-7, INPUT, DOWN);
1241 PIN_SLP(gpy4-0, INPUT, DOWN);
1242 PIN_SLP(gpy4-1, INPUT, DOWN);
1243 PIN_SLP(gpy4-2, INPUT, DOWN);
1244 PIN_SLP(gpy4-3, INPUT, DOWN);
1245 PIN_SLP(gpy4-4, INPUT, DOWN);
1246 PIN_SLP(gpy4-5, INPUT, DOWN);
1247 PIN_SLP(gpy4-6, INPUT, DOWN);
1248 PIN_SLP(gpy4-7, INPUT, DOWN);
1250 PIN_SLP(gpy5-0, INPUT, DOWN);
1251 PIN_SLP(gpy5-1, INPUT, DOWN);
1252 PIN_SLP(gpy5-2, INPUT, DOWN);
1253 PIN_SLP(gpy5-3, INPUT, DOWN);
1254 PIN_SLP(gpy5-4, INPUT, DOWN);
1255 PIN_SLP(gpy5-5, INPUT, DOWN);
1256 PIN_SLP(gpy5-6, INPUT, DOWN);
1257 PIN_SLP(gpy5-7, INPUT, DOWN);
1259 PIN_SLP(gpy6-0, INPUT, DOWN);
1260 PIN_SLP(gpy6-1, INPUT, DOWN);
1261 PIN_SLP(gpy6-2, INPUT, DOWN);
1262 PIN_SLP(gpy6-3, INPUT, DOWN);
1263 PIN_SLP(gpy6-4, INPUT, DOWN);
1264 PIN_SLP(gpy6-5, INPUT, DOWN);
1265 PIN_SLP(gpy6-6, INPUT, DOWN);
1266 PIN_SLP(gpy6-7, INPUT, DOWN);
1271 pinctrl-names = "default";
1272 pinctrl-0 = <&sleep2>;
1274 sleep2: sleep-states {
1275 PIN_SLP(gpz-0, INPUT, DOWN);
1276 PIN_SLP(gpz-1, INPUT, DOWN);
1277 PIN_SLP(gpz-2, INPUT, DOWN);
1278 PIN_SLP(gpz-3, INPUT, DOWN);
1279 PIN_SLP(gpz-4, INPUT, DOWN);
1280 PIN_SLP(gpz-5, INPUT, DOWN);
1281 PIN_SLP(gpz-6, INPUT, DOWN);
1286 pinctrl-names = "default";
1287 pinctrl-0 = <&sleep3>;
1289 sleep3: sleep-states {
1290 PIN_SLP(gpv0-0, INPUT, DOWN);
1291 PIN_SLP(gpv0-1, INPUT, DOWN);
1292 PIN_SLP(gpv0-2, INPUT, DOWN);
1293 PIN_SLP(gpv0-3, INPUT, DOWN);
1294 PIN_SLP(gpv0-4, INPUT, DOWN);
1295 PIN_SLP(gpv0-5, INPUT, DOWN);
1296 PIN_SLP(gpv0-6, INPUT, DOWN);
1297 PIN_SLP(gpv0-7, INPUT, DOWN);
1299 PIN_SLP(gpv1-0, INPUT, DOWN);
1300 PIN_SLP(gpv1-1, INPUT, DOWN);
1301 PIN_SLP(gpv1-2, INPUT, DOWN);
1302 PIN_SLP(gpv1-3, INPUT, DOWN);
1303 PIN_SLP(gpv1-4, INPUT, DOWN);
1304 PIN_SLP(gpv1-5, INPUT, DOWN);
1305 PIN_SLP(gpv1-6, INPUT, DOWN);
1306 PIN_SLP(gpv1-7, INPUT, DOWN);
1308 PIN_SLP(gpv2-0, INPUT, DOWN);
1309 PIN_SLP(gpv2-1, INPUT, DOWN);
1310 PIN_SLP(gpv2-2, INPUT, DOWN);
1311 PIN_SLP(gpv2-3, INPUT, DOWN);
1312 PIN_SLP(gpv2-4, INPUT, DOWN);
1313 PIN_SLP(gpv2-5, INPUT, DOWN);
1314 PIN_SLP(gpv2-6, INPUT, DOWN);
1315 PIN_SLP(gpv2-7, INPUT, DOWN);
1317 PIN_SLP(gpv3-0, INPUT, DOWN);
1318 PIN_SLP(gpv3-1, INPUT, DOWN);
1319 PIN_SLP(gpv3-2, INPUT, DOWN);
1320 PIN_SLP(gpv3-3, INPUT, DOWN);
1321 PIN_SLP(gpv3-4, INPUT, DOWN);
1322 PIN_SLP(gpv3-5, INPUT, DOWN);
1323 PIN_SLP(gpv3-6, INPUT, DOWN);
1324 PIN_SLP(gpv3-7, INPUT, DOWN);
1326 PIN_SLP(gpv4-0, INPUT, DOWN);
1331 pinctrl-0 = <&pwm0_out>;
1332 pinctrl-names = "default";
1333 samsung,pwm-outputs = <0>;
1339 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1340 clock-names = "rtc", "rtc_src";
1345 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1347 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1348 pinctrl-names = "default";
1349 vmmc-supply = <&ldo21_reg>;
1370 pinctrl-names = "default";
1371 pinctrl-0 = <&spi1_bus>;
1372 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1375 s5c73m3_spi: s5c73m3@0 {
1376 compatible = "samsung,s5c73m3";
1377 spi-max-frequency = <50000000>;
1380 samsung,spi-feedback-delay = <2>;
1386 vtmu-supply = <&ldo10_reg>;