1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos4412 based p4note device family base DT.
4 * Based on exynos4412-midas.dtsi.
6 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
7 * http://www.samsung.com
11 #include "exynos4412.dtsi"
12 #include "exynos4412-ppmu-common.dtsi"
14 #include <dt-bindings/clock/maxim,max77686.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/linux-event-codes.h>
17 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/power/summit,smb347-charger.h>
19 #include "exynos-pinctrl.h"
22 compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
25 device_type = "memory";
26 reg = <0x40000000 0x80000000>;
30 stdout-path = &serial_2;
34 compatible = "samsung,secure-firmware";
35 reg = <0x0204f000 0x1000>;
40 compatible = "samsung,clock-xxti";
41 clock-frequency = <0>;
45 compatible = "samsung,clock-xusbxti";
46 clock-frequency = <24000000>;
51 compatible = "gpio-keys";
52 pinctrl-names = "default";
53 pinctrl-0 = <&gpio_keys>;
56 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_VOLUMEDOWN>;
58 label = "volume down";
59 debounce-interval = <10>;
63 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_VOLUMEUP>;
66 debounce-interval = <10>;
70 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_POWER>;
73 debounce-interval = <10>;
79 compatible = "regulator-fixed";
80 regulator-name = "TSP_LDO1";
81 pinctrl-names = "default";
82 pinctrl-0 = <&tsp_reg_gpio_1>;
83 gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
89 compatible = "regulator-fixed";
90 regulator-name = "TSP_LDO2";
91 pinctrl-names = "default";
92 pinctrl-0 = <&tsp_reg_gpio_2>;
93 gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
99 compatible = "regulator-fixed";
100 regulator-name = "TSP_LDO3";
101 pinctrl-names = "default";
102 pinctrl-0 = <&tsp_reg_gpio_3>;
103 gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
104 startup-delay-us = <20000>;
109 panel_vdd: voltage-regulator-4 {
110 compatible = "regulator-fixed";
111 regulator-name = "LCD_ENABLE";
112 pinctrl-names = "default";
113 pinctrl-0 = <&lcd_enable>;
114 gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
119 wlan_pwrseq: sdhci3-pwrseq {
120 compatible = "mmc-pwrseq-simple";
121 reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
122 pinctrl-0 = <&wifi_reset>;
123 pinctrl-names = "default";
124 clocks = <&max77686 MAX77686_CLK_PMIC>;
125 clock-names = "ext_clock";
128 battery_cell: battery-cell {
129 compatible = "simple-battery";
130 device-chemistry = "lithium-ion";
131 constant-charge-current-max-microamp = <2200000>;
132 precharge-current-microamp = <250000>;
133 charge-term-current-microamp = <250000>;
134 constant-charge-voltage-max-microvolt = <4200000>;
138 compatible = "i2c-gpio";
139 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
140 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
141 i2c-gpio,delay-us = <2>;
142 #address-cells = <1>;
146 compatible = "asahi-kasei,ak8975";
148 pinctrl-0 = <&ak8975_irq>;
149 pinctrl-names = "default";
150 interrupt-parent = <&gpm4>;
151 interrupts = <7 IRQ_TYPE_EDGE_RISING>;
156 compatible = "i2c-gpio";
157 sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
158 scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
159 i2c-gpio,delay-us = <2>;
160 #address-cells = <1>;
164 compatible = "maxim,max17042";
166 pinctrl-0 = <&fuel_alert_irq>;
167 pinctrl-names = "default";
168 interrupt-parent = <&gpx2>;
169 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
170 maxim,rsns-microohm = <10000>;
171 maxim,over-heat-temp = <600>;
172 maxim,over-volt = <4300>;
177 compatible = "i2c-gpio";
178 sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
179 scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
180 i2c-gpio,delay-us = <5>;
181 #address-cells = <1>;
185 compatible = "st,stmpe811";
187 pinctrl-0 = <&stmpe_adc_irq>;
188 pinctrl-names = "default";
189 interrupt-parent = <&gpx0>;
190 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
191 interrupt-controller;
196 st,sample-time = <3>;
199 compatible = "st,stmpe-adc";
200 #io-channel-cells = <1>;
201 st,norequest-mask = <0x2f>;
207 compatible = "i2c-gpio";
208 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
209 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
211 i2c-gpio,delay-us = <2>;
212 #address-cells = <1>;
215 power_supply: charger@6 {
216 compatible = "summit,smb347";
218 summit,enable-usb-charging;
219 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
220 summit,fast-voltage-threshold-microvolt = <2600000>;
221 summit,chip-temperature-threshold-celsius = <130>;
222 summit,usb-current-limit-microamp = <1800000>;
224 monitored-battery = <&battery_cell>;
229 compatible = "samsung,ltl101al01";
230 pinctrl-0 = <&lvds_nshdn>;
231 pinctrl-names = "default";
232 power-supply = <&panel_vdd>;
233 enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
234 backlight = <&backlight>;
238 remote-endpoint = <&fimd_ep>;
243 backlight: backlight {
244 compatible = "pwm-backlight";
245 pinctrl-0 = <&led_bl_reset>;
246 pinctrl-names = "default";
247 enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
248 power-supply = <&panel_vdd>;
249 pwms = <&pwm 1 78770 0>;
250 brightness-levels = <0 48 128 255>;
251 num-interpolated-steps = <8>;
252 default-brightness-level = <12>;
257 vdd-supply = <&ldo3_reg>;
263 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
264 vdd-supply = <&buck1_reg>;
269 devfreq = <&bus_dmc>;
274 devfreq = <&bus_dmc>;
279 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
280 vdd-supply = <&buck3_reg>;
285 devfreq = <&bus_leftbus>;
290 devfreq = <&bus_leftbus>;
295 devfreq = <&bus_leftbus>;
300 devfreq = <&bus_leftbus>;
305 devfreq = <&bus_leftbus>;
310 cpu0-supply = <&buck2_reg>;
316 /* Corresponds to 800MHz at freq_table */
317 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
318 <&cpu2 7 7>, <&cpu3 7 7>;
321 /* Corresponds to 200MHz at freq_table */
322 cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
323 <&cpu2 13 13>, <&cpu3 13 13>;
333 pinctrl-0 = <&lcd_clk &lcd_data24>;
334 pinctrl-names = "default";
335 #address-cells = <1>;
345 remote-endpoint = <&lcd_ep>;
351 mali-supply = <&buck4_reg>;
356 vusb_a-supply = <&ldo12_reg>;
357 dr_mode = "peripheral";
362 samsung,i2c-sda-delay = <100>;
363 samsung,i2c-slave-addr = <0x10>;
364 samsung,i2c-max-bus-freq = <400000>;
365 pinctrl-0 = <&i2c3_bus>;
366 pinctrl-names = "default";
370 compatible = "atmel,maxtouch";
372 pinctrl-0 = <&tsp_rst &tsp_irq>;
373 pinctrl-names = "default";
374 interrupt-parent = <&gpm2>;
375 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
376 reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
381 samsung,i2c-sda-delay = <100>;
382 samsung,i2c-slave-addr = <0x10>;
383 samsung,i2c-max-bus-freq = <400000>;
384 pinctrl-0 = <&i2c7_bus>;
385 pinctrl-names = "default";
389 compatible = "maxim,max77686";
390 interrupt-parent = <&gpx0>;
391 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
392 pinctrl-0 = <&max77686_irq>;
393 pinctrl-names = "default";
400 regulator-name = "ldo1";
405 regulator-name = "ldo2";
411 regulator-name = "VCC_1.8V_AP";
412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvolt = <1800000>;
417 regulator-state-mem {
418 regulator-on-in-suspend;
423 regulator-name = "ldo4";
428 regulator-name = "VCC_1.8V_IO";
429 regulator-min-microvolt = <1800000>;
430 regulator-max-microvolt = <1800000>;
432 regulator-state-mem {
433 regulator-off-in-suspend;
438 regulator-name = "ldo6";
443 regulator-name = "ldo7";
449 regulator-name = "VMIPI_1.0V";
450 regulator-min-microvolt = <1000000>;
451 regulator-max-microvolt = <1000000>;
455 regulator-state-mem {
456 regulator-on-in-suspend;
462 regulator-name = "VLED_IC_1.9V";
463 regulator-min-microvolt = <1950000>;
464 regulator-max-microvolt = <1950000>;
466 regulator-state-mem {
467 regulator-off-in-suspend;
473 regulator-name = "VMIPI_1.8V";
474 regulator-min-microvolt = <1800000>;
475 regulator-max-microvolt = <1800000>;
479 regulator-state-mem {
480 regulator-on-in-suspend;
485 regulator-name = "VABB1_1.9V";
486 regulator-min-microvolt = <1950000>;
487 regulator-max-microvolt = <1950000>;
491 regulator-state-mem {
492 regulator-off-in-suspend;
498 regulator-name = "VUOTG_3.0V";
499 regulator-min-microvolt = <3000000>;
500 regulator-max-microvolt = <3000000>;
504 regulator-state-mem {
505 regulator-on-in-suspend;
511 regulator-name = "ldo13";
515 regulator-name = "VABB2_1.9V";
516 regulator-min-microvolt = <1950000>;
517 regulator-max-microvolt = <1950000>;
521 regulator-state-mem {
522 regulator-off-in-suspend;
527 regulator-name = "ldo15";
532 regulator-name = "ldo16";
538 regulator-name = "ldo17";
543 regulator-name = "CAM_IO_1.8V";
544 regulator-min-microvolt = <1800000>;
545 regulator-max-microvolt = <1800000>;
547 regulator-state-mem {
548 regulator-off-in-suspend;
554 regulator-name = "VT_CORE_1.8V";
555 regulator-min-microvolt = <1800000>;
556 regulator-max-microvolt = <1800000>;
558 regulator-state-mem {
559 regulator-off-in-suspend;
565 regulator-name = "ldo20";
570 regulator-name = "VTF_2.8V";
571 regulator-min-microvolt = <2800000>;
572 regulator-max-microvolt = <2800000>;
573 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
578 regulator-name = "ldo22";
583 regulator-name = "VDD_ADC_3.3V";
584 regulator-min-microvolt = <3300000>;
585 regulator-max-microvolt = <3300000>;
589 regulator-state-mem {
590 regulator-off-in-suspend;
596 regulator-name = "CAM_A2.8V";
597 regulator-min-microvolt = <2800000>;
598 regulator-max-microvolt = <2800000>;
600 regulator-state-mem {
601 regulator-off-in-suspend;
606 regulator-name = "VLED_3.3V";
607 regulator-min-microvolt = <3300000>;
608 regulator-max-microvolt = <3300000>;
610 regulator-state-mem {
611 regulator-off-in-suspend;
617 regulator-name = "3MP_AF_2.8V";
618 regulator-min-microvolt = <2800000>;
619 regulator-max-microvolt = <2800000>;
621 regulator-state-mem {
622 regulator-off-in-suspend;
627 regulator-name = "VDD_MIF";
628 regulator-min-microvolt = <850000>;
629 regulator-max-microvolt = <1050000>;
635 regulator-name = "VDD_ARM";
636 regulator-min-microvolt = <850000>;
637 regulator-max-microvolt = <1500000>;
643 regulator-name = "VDD_INT";
644 regulator-min-microvolt = <850000>;
645 regulator-max-microvolt = <1100000>;
651 regulator-name = "VDD_G3D";
652 regulator-min-microvolt = <850000>;
653 regulator-max-microvolt = <1075000>;
658 regulator-name = "buck5";
663 regulator-name = "buck6";
668 regulator-name = "buck7";
674 regulator-name = "buck8";
678 regulator-name = "3MP_CORE_1.2V";
679 regulator-min-microvolt = <1200000>;
680 regulator-max-microvolt = <1200000>;
682 regulator-state-mem {
683 regulator-off-in-suspend;
693 card-detect-delay = <200>;
694 clock-frequency = <400000000>;
695 samsung,dw-mshc-ciu-div = <0>;
696 samsung,dw-mshc-sdr-timing = <2 3>;
697 samsung,dw-mshc-ddr-timing = <1 2>;
698 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
699 pinctrl-names = "default";
707 pinctrl-names = "default";
708 pinctrl-0 = <&sleep0>;
710 tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
711 samsung,pins = "gpb-5";
712 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
713 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
716 tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
717 samsung,pins = "gpb-7";
718 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
719 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
722 lcd_enable: lcd-enable-pins {
723 samsung,pins = "gpc0-1";
724 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
725 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
728 sleep0: sleep-state {
729 PIN_SLP(gpa0-0, INPUT, NONE);
730 PIN_SLP(gpa0-1, OUT0, NONE);
731 PIN_SLP(gpa0-2, INPUT, NONE);
732 PIN_SLP(gpa0-3, INPUT, UP);
733 PIN_SLP(gpa0-4, INPUT, NONE);
734 PIN_SLP(gpa0-5, INPUT, DOWN);
735 PIN_SLP(gpa0-6, INPUT, DOWN);
736 PIN_SLP(gpa0-7, INPUT, UP);
738 PIN_SLP(gpa1-0, INPUT, DOWN);
739 PIN_SLP(gpa1-1, INPUT, DOWN);
740 PIN_SLP(gpa1-2, INPUT, DOWN);
741 PIN_SLP(gpa1-3, INPUT, DOWN);
742 PIN_SLP(gpa1-4, INPUT, DOWN);
743 PIN_SLP(gpa1-5, INPUT, DOWN);
745 PIN_SLP(gpb-0, INPUT, NONE);
746 PIN_SLP(gpb-1, INPUT, NONE);
747 PIN_SLP(gpb-2, INPUT, NONE);
748 PIN_SLP(gpb-3, INPUT, NONE);
749 PIN_SLP(gpb-4, INPUT, DOWN);
750 PIN_SLP(gpb-5, INPUT, DOWN);
751 PIN_SLP(gpb-6, INPUT, DOWN);
752 PIN_SLP(gpb-7, INPUT, DOWN);
754 PIN_SLP(gpc0-0, INPUT, DOWN);
755 PIN_SLP(gpc0-1, INPUT, DOWN);
756 PIN_SLP(gpc0-2, INPUT, DOWN);
757 PIN_SLP(gpc0-3, INPUT, DOWN);
758 PIN_SLP(gpc0-4, INPUT, DOWN);
760 PIN_SLP(gpc1-0, INPUT, UP);
761 PIN_SLP(gpc1-1, PREV, NONE);
762 PIN_SLP(gpc1-2, INPUT, UP);
763 PIN_SLP(gpc1-3, INPUT, UP);
764 PIN_SLP(gpc1-4, INPUT, UP);
766 PIN_SLP(gpd0-0, INPUT, DOWN);
767 PIN_SLP(gpd0-1, OUT0, NONE);
768 PIN_SLP(gpd0-2, INPUT, NONE);
769 PIN_SLP(gpd0-3, INPUT, NONE);
771 PIN_SLP(gpd1-0, INPUT, DOWN);
772 PIN_SLP(gpd1-1, INPUT, DOWN);
773 PIN_SLP(gpd1-2, INPUT, NONE);
774 PIN_SLP(gpd1-3, INPUT, NONE);
776 PIN_SLP(gpf0-0, OUT0, NONE);
777 PIN_SLP(gpf0-1, OUT0, NONE);
778 PIN_SLP(gpf0-2, OUT0, NONE);
779 PIN_SLP(gpf0-3, OUT0, NONE);
780 PIN_SLP(gpf0-4, OUT0, NONE);
781 PIN_SLP(gpf0-5, OUT0, NONE);
782 PIN_SLP(gpf0-6, OUT0, NONE);
783 PIN_SLP(gpf0-7, OUT0, NONE);
785 PIN_SLP(gpf1-0, OUT0, NONE);
786 PIN_SLP(gpf1-1, OUT0, NONE);
787 PIN_SLP(gpf1-2, OUT0, NONE);
788 PIN_SLP(gpf1-3, OUT0, NONE);
789 PIN_SLP(gpf1-4, OUT0, NONE);
790 PIN_SLP(gpf1-5, OUT0, NONE);
791 PIN_SLP(gpf1-6, OUT0, NONE);
792 PIN_SLP(gpf1-7, OUT0, NONE);
794 PIN_SLP(gpf2-0, OUT0, NONE);
795 PIN_SLP(gpf2-1, OUT0, NONE);
796 PIN_SLP(gpf2-2, OUT0, NONE);
797 PIN_SLP(gpf2-3, OUT0, NONE);
798 PIN_SLP(gpf2-4, OUT0, NONE);
799 PIN_SLP(gpf2-5, OUT0, NONE);
800 PIN_SLP(gpf2-6, OUT0, NONE);
801 PIN_SLP(gpf2-7, OUT0, NONE);
803 PIN_SLP(gpf3-0, OUT0, NONE);
804 PIN_SLP(gpf3-1, OUT0, NONE);
805 PIN_SLP(gpf3-2, OUT0, NONE);
806 PIN_SLP(gpf3-3, OUT0, NONE);
807 PIN_SLP(gpf3-4, OUT0, NONE);
808 PIN_SLP(gpf3-5, OUT0, NONE);
810 PIN_SLP(gpj0-0, INPUT, DOWN);
811 PIN_SLP(gpj0-1, INPUT, DOWN);
812 PIN_SLP(gpj0-2, INPUT, DOWN);
813 PIN_SLP(gpj0-3, PREV, NONE);
814 PIN_SLP(gpj0-4, PREV, NONE);
815 PIN_SLP(gpj0-5, OUT0, NONE);
816 PIN_SLP(gpj0-6, OUT0, NONE);
817 PIN_SLP(gpj0-7, OUT0, NONE);
819 PIN_SLP(gpj1-0, OUT0, NONE);
820 PIN_SLP(gpj1-1, INPUT, DOWN);
821 PIN_SLP(gpj1-2, PREV, NONE);
822 PIN_SLP(gpj1-3, OUT0, NONE);
827 pinctrl-names = "default";
828 pinctrl-0 = <&sleep1>;
830 sd3_wifi: sd3-wifi-pins {
831 samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
832 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
833 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
836 bt_shutdown: bt-shutdown-pins {
837 samsung,pins = "gpl0-6";
838 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
839 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
842 uart_sel: uart-sel-pins {
843 samsung,pins = "gpl2-7";
844 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
845 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
846 samsung,pin-val = <1>;
847 /* 0 = CP, 1 = AP (serial output) */
850 led_bl_reset: led-bl-reset-pins {
851 samsung,pins = "gpm0-1";
852 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
853 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
856 tsp_rst: tsp-rst-pins {
857 samsung,pins = "gpm0-4";
858 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
859 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
862 lvds_nshdn: lvds-nshdn-pins {
863 samsung,pins = "gpm0-5";
864 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
865 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
868 tsp_irq: tsp-irq-pins {
869 samsung,pins = "gpm2-3";
870 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
871 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
874 wifi_reset: wifi-reset-pins {
875 samsung,pins = "gpm3-5";
876 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
877 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
880 tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
881 samsung,pins = "gpm4-5";
882 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
883 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
886 ak8975_irq: ak8975-irq-pins {
887 samsung,pins = "gpm4-7";
888 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
889 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
892 stmpe_adc_irq: stmpe-adc-irq-pins {
893 samsung,pins = "gpx0-1";
894 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
895 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
898 max77686_irq: max77686-irq-pins {
899 samsung,pins = "gpx0-7";
900 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
903 gpio_keys: gpio-keys-pins {
904 samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
905 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
908 fuel_alert_irq: fuel-alert-irq-pins {
909 samsung,pins = "gpx2-3";
910 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
911 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
914 wifi_host_wake: wifi-host-wake-pins {
915 samsung,pins = "gpx2-5";
916 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
917 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
920 bt_host_wakeup: bt-host-wakeup-pins {
921 samsung,pins = "gpx2-6";
922 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
923 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
926 bt_device_wakeup: bt-device-wakeup-pins {
927 samsung,pins = "gpx3-1";
928 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
929 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
932 sdhci2_cd: sdhci2-cd-pins {
933 samsung,pins = "gpx3-4";
934 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
937 sleep1: sleep-state {
938 PIN_SLP(gpk0-0, PREV, NONE);
939 PIN_SLP(gpk0-1, PREV, NONE);
940 PIN_SLP(gpk0-2, PREV, NONE);
941 PIN_SLP(gpk0-3, PREV, NONE);
942 PIN_SLP(gpk0-4, PREV, NONE);
943 PIN_SLP(gpk0-5, PREV, NONE);
944 PIN_SLP(gpk0-6, PREV, NONE);
946 PIN_SLP(gpk1-0, INPUT, DOWN);
947 PIN_SLP(gpk1-1, INPUT, DOWN);
948 PIN_SLP(gpk1-2, INPUT, DOWN);
949 PIN_SLP(gpk1-3, PREV, NONE);
950 PIN_SLP(gpk1-4, PREV, NONE);
951 PIN_SLP(gpk1-5, PREV, NONE);
952 PIN_SLP(gpk1-6, PREV, NONE);
954 PIN_SLP(gpk2-0, INPUT, DOWN);
955 PIN_SLP(gpk2-1, INPUT, DOWN);
956 PIN_SLP(gpk2-2, INPUT, DOWN);
957 PIN_SLP(gpk2-3, INPUT, DOWN);
958 PIN_SLP(gpk2-4, INPUT, DOWN);
959 PIN_SLP(gpk2-5, INPUT, DOWN);
960 PIN_SLP(gpk2-6, INPUT, DOWN);
962 PIN_SLP(gpk3-0, OUT0, NONE);
963 PIN_SLP(gpk3-1, INPUT, NONE);
964 PIN_SLP(gpk3-2, INPUT, DOWN);
965 PIN_SLP(gpk3-3, INPUT, NONE);
966 PIN_SLP(gpk3-4, INPUT, NONE);
967 PIN_SLP(gpk3-5, INPUT, NONE);
968 PIN_SLP(gpk3-6, INPUT, NONE);
970 PIN_SLP(gpl0-0, OUT0, NONE);
971 PIN_SLP(gpl0-1, INPUT, NONE);
972 PIN_SLP(gpl0-2, INPUT, NONE);
973 PIN_SLP(gpl0-3, INPUT, DOWN);
974 PIN_SLP(gpl0-4, PREV, NONE);
975 PIN_SLP(gpl0-6, PREV, NONE);
977 PIN_SLP(gpl1-0, OUT0, NONE);
978 PIN_SLP(gpl1-1, OUT0, NONE);
980 PIN_SLP(gpl2-0, INPUT, DOWN);
981 PIN_SLP(gpl2-1, INPUT, DOWN);
982 PIN_SLP(gpl2-2, INPUT, DOWN);
983 PIN_SLP(gpl2-3, INPUT, DOWN);
984 PIN_SLP(gpl2-4, OUT0, NONE);
985 PIN_SLP(gpl2-5, INPUT, DOWN);
986 PIN_SLP(gpl2-6, PREV, NONE);
987 PIN_SLP(gpl2-7, PREV, NONE);
989 PIN_SLP(gpm0-0, PREV, NONE);
990 PIN_SLP(gpm0-1, OUT0, NONE);
991 PIN_SLP(gpm0-2, INPUT, DOWN);
992 PIN_SLP(gpm0-3, INPUT, NONE);
993 PIN_SLP(gpm0-4, OUT0, NONE);
994 PIN_SLP(gpm0-5, OUT0, NONE);
995 PIN_SLP(gpm0-6, INPUT, DOWN);
996 PIN_SLP(gpm0-7, OUT0, NONE);
998 PIN_SLP(gpm1-0, INPUT, NONE);
999 PIN_SLP(gpm1-1, INPUT, NONE);
1000 PIN_SLP(gpm1-2, INPUT, NONE);
1001 PIN_SLP(gpm1-3, INPUT, NONE);
1002 PIN_SLP(gpm1-4, INPUT, NONE);
1003 PIN_SLP(gpm1-5, INPUT, NONE);
1004 PIN_SLP(gpm1-6, INPUT, DOWN);
1006 PIN_SLP(gpm2-0, INPUT, NONE);
1007 PIN_SLP(gpm2-1, INPUT, NONE);
1008 PIN_SLP(gpm2-2, OUT0, NONE);
1009 PIN_SLP(gpm2-3, OUT0, DOWN);
1010 PIN_SLP(gpm2-4, INPUT, DOWN);
1012 PIN_SLP(gpm3-0, PREV, NONE);
1013 PIN_SLP(gpm3-1, PREV, NONE);
1014 PIN_SLP(gpm3-2, PREV, NONE);
1015 PIN_SLP(gpm3-3, OUT1, NONE);
1016 PIN_SLP(gpm3-4, OUT0, DOWN);
1017 PIN_SLP(gpm3-5, PREV, NONE);
1018 PIN_SLP(gpm3-6, PREV, NONE);
1019 PIN_SLP(gpm3-7, OUT0, NONE);
1021 PIN_SLP(gpm4-0, INPUT, NONE);
1022 PIN_SLP(gpm4-1, INPUT, NONE);
1023 PIN_SLP(gpm4-2, INPUT, DOWN);
1024 PIN_SLP(gpm4-3, INPUT, DOWN);
1025 PIN_SLP(gpm4-4, PREV, NONE);
1026 PIN_SLP(gpm4-5, OUT0, NONE);
1027 PIN_SLP(gpm4-6, OUT0, NONE);
1028 PIN_SLP(gpm4-7, INPUT, DOWN);
1030 PIN_SLP(gpy0-0, INPUT, DOWN);
1031 PIN_SLP(gpy0-1, INPUT, DOWN);
1032 PIN_SLP(gpy0-2, INPUT, NONE);
1033 PIN_SLP(gpy0-3, INPUT, NONE);
1034 PIN_SLP(gpy0-4, INPUT, NONE);
1035 PIN_SLP(gpy0-5, INPUT, NONE);
1037 PIN_SLP(gpy1-0, INPUT, DOWN);
1038 PIN_SLP(gpy1-1, INPUT, DOWN);
1039 PIN_SLP(gpy1-2, INPUT, DOWN);
1040 PIN_SLP(gpy1-3, INPUT, DOWN);
1042 PIN_SLP(gpy2-0, PREV, NONE);
1043 PIN_SLP(gpy2-1, INPUT, DOWN);
1044 PIN_SLP(gpy2-2, INPUT, NONE);
1045 PIN_SLP(gpy2-3, INPUT, NONE);
1046 PIN_SLP(gpy2-4, INPUT, NONE);
1047 PIN_SLP(gpy2-5, INPUT, NONE);
1049 PIN_SLP(gpy3-0, INPUT, DOWN);
1050 PIN_SLP(gpy3-1, INPUT, DOWN);
1051 PIN_SLP(gpy3-2, INPUT, DOWN);
1052 PIN_SLP(gpy3-3, INPUT, DOWN);
1053 PIN_SLP(gpy3-4, INPUT, DOWN);
1054 PIN_SLP(gpy3-5, INPUT, DOWN);
1055 PIN_SLP(gpy3-6, INPUT, DOWN);
1056 PIN_SLP(gpy3-7, INPUT, DOWN);
1058 PIN_SLP(gpy4-0, INPUT, DOWN);
1059 PIN_SLP(gpy4-1, INPUT, DOWN);
1060 PIN_SLP(gpy4-2, INPUT, DOWN);
1061 PIN_SLP(gpy4-3, INPUT, DOWN);
1062 PIN_SLP(gpy4-4, INPUT, DOWN);
1063 PIN_SLP(gpy4-5, INPUT, DOWN);
1064 PIN_SLP(gpy4-6, INPUT, DOWN);
1065 PIN_SLP(gpy4-7, INPUT, DOWN);
1067 PIN_SLP(gpy5-0, INPUT, DOWN);
1068 PIN_SLP(gpy5-1, INPUT, DOWN);
1069 PIN_SLP(gpy5-2, INPUT, DOWN);
1070 PIN_SLP(gpy5-3, INPUT, DOWN);
1071 PIN_SLP(gpy5-4, INPUT, DOWN);
1072 PIN_SLP(gpy5-5, INPUT, DOWN);
1073 PIN_SLP(gpy5-6, INPUT, DOWN);
1074 PIN_SLP(gpy5-7, INPUT, DOWN);
1076 PIN_SLP(gpy6-0, INPUT, DOWN);
1077 PIN_SLP(gpy6-1, INPUT, DOWN);
1078 PIN_SLP(gpy6-2, INPUT, DOWN);
1079 PIN_SLP(gpy6-3, INPUT, DOWN);
1080 PIN_SLP(gpy6-4, INPUT, DOWN);
1081 PIN_SLP(gpy6-5, INPUT, DOWN);
1082 PIN_SLP(gpy6-6, INPUT, DOWN);
1083 PIN_SLP(gpy6-7, INPUT, DOWN);
1088 pinctrl-names = "default";
1089 pinctrl-0 = <&sleep2>;
1091 sleep2: sleep-state {
1092 PIN_SLP(gpz-0, INPUT, DOWN);
1093 PIN_SLP(gpz-1, INPUT, DOWN);
1094 PIN_SLP(gpz-2, INPUT, DOWN);
1095 PIN_SLP(gpz-3, INPUT, DOWN);
1096 PIN_SLP(gpz-4, INPUT, DOWN);
1097 PIN_SLP(gpz-5, INPUT, DOWN);
1098 PIN_SLP(gpz-6, INPUT, DOWN);
1103 pinctrl-names = "default";
1104 pinctrl-0 = <&sleep3>;
1106 sleep3: sleep-state {
1107 PIN_SLP(gpv0-0, INPUT, DOWN);
1108 PIN_SLP(gpv0-1, INPUT, DOWN);
1109 PIN_SLP(gpv0-2, INPUT, DOWN);
1110 PIN_SLP(gpv0-3, INPUT, DOWN);
1111 PIN_SLP(gpv0-4, INPUT, DOWN);
1112 PIN_SLP(gpv0-5, INPUT, DOWN);
1113 PIN_SLP(gpv0-6, INPUT, DOWN);
1114 PIN_SLP(gpv0-7, INPUT, DOWN);
1116 PIN_SLP(gpv1-0, INPUT, DOWN);
1117 PIN_SLP(gpv1-1, INPUT, DOWN);
1118 PIN_SLP(gpv1-2, INPUT, DOWN);
1119 PIN_SLP(gpv1-3, INPUT, DOWN);
1120 PIN_SLP(gpv1-4, INPUT, DOWN);
1121 PIN_SLP(gpv1-5, INPUT, DOWN);
1122 PIN_SLP(gpv1-6, INPUT, DOWN);
1123 PIN_SLP(gpv1-7, INPUT, DOWN);
1125 PIN_SLP(gpv2-0, INPUT, DOWN);
1126 PIN_SLP(gpv2-1, INPUT, DOWN);
1127 PIN_SLP(gpv2-2, INPUT, DOWN);
1128 PIN_SLP(gpv2-3, INPUT, DOWN);
1129 PIN_SLP(gpv2-4, INPUT, DOWN);
1130 PIN_SLP(gpv2-5, INPUT, DOWN);
1131 PIN_SLP(gpv2-6, INPUT, DOWN);
1132 PIN_SLP(gpv2-7, INPUT, DOWN);
1134 PIN_SLP(gpv3-0, INPUT, DOWN);
1135 PIN_SLP(gpv3-1, INPUT, DOWN);
1136 PIN_SLP(gpv3-2, INPUT, DOWN);
1137 PIN_SLP(gpv3-3, INPUT, DOWN);
1138 PIN_SLP(gpv3-4, INPUT, DOWN);
1139 PIN_SLP(gpv3-5, INPUT, DOWN);
1140 PIN_SLP(gpv3-6, INPUT, DOWN);
1141 PIN_SLP(gpv3-7, INPUT, DOWN);
1143 PIN_SLP(gpv4-0, INPUT, DOWN);
1144 PIN_SLP(gpv4-1, INPUT, DOWN);
1148 &pmu_system_controller {
1149 assigned-clocks = <&pmu_system_controller 0>;
1150 assigned-clock-parents = <&clock CLK_XUSBXTI>;
1154 pinctrl-0 = <&pwm1_out>;
1155 pinctrl-names = "default";
1156 samsung,pwm-outputs = <1>;
1161 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1162 clock-names = "rtc", "rtc_src";
1168 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1169 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1170 pinctrl-names = "default";
1171 vmmc-supply = <&ldo21_reg>;
1176 #address-cells = <1>;
1180 mmc-pwrseq = <&wlan_pwrseq>;
1182 pinctrl-names = "default";
1183 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
1187 compatible = "brcm,bcm4329-fmac";
1189 pinctrl-names = "default";
1190 pinctrl-0 = <&wifi_host_wake>;
1191 interrupt-parent = <&gpx2>;
1192 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
1193 interrupt-names = "host-wake";
1198 pinctrl-0 = <&uart0_data &uart0_fctl>;
1199 pinctrl-names = "default";
1203 compatible = "brcm,bcm4330-bt";
1204 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1205 pinctrl-names = "default";
1207 max-speed = <2000000>;
1208 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1209 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1210 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1211 clocks = <&max77686 MAX77686_CLK_PMIC>;
1212 clock-names = "lpo";
1217 pinctrl-0 = <&uart_sel>;
1218 pinctrl-names = "default";