1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos4412 based Trats 2 board device tree source
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
8 * Device tree source file for Samsung's Trats 2 board which is based on
9 * Samsung's Exynos4412 SoC.
13 #include "exynos4412.dtsi"
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
17 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/clock/maxim,max77686.h>
19 #include <dt-bindings/pinctrl/samsung.h>
22 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
25 i2c11 = &i2c_max77693;
26 i2c12 = &i2c_max77693_fuel;
30 stdout-path = &serial_2;
34 compatible = "samsung,secure-firmware";
35 reg = <0x0204F000 0x1000>;
40 compatible = "samsung,clock-xxti", "fixed-clock";
41 clock-frequency = <0>;
45 compatible = "samsung,clock-xusbxti", "fixed-clock";
46 clock-frequency = <24000000>;
50 cam_io_reg: voltage-regulator-1 {
51 compatible = "regulator-fixed";
52 regulator-name = "CAM_SENSOR_A";
53 regulator-min-microvolt = <2800000>;
54 regulator-max-microvolt = <2800000>;
59 cam_af_reg: voltage-regulator-2 {
60 compatible = "regulator-fixed";
61 regulator-name = "CAM_AF";
62 regulator-min-microvolt = <2800000>;
63 regulator-max-microvolt = <2800000>;
68 vsil12: voltage-regulator-3 {
69 compatible = "regulator-fixed";
70 regulator-name = "VSIL_1.2V";
71 regulator-min-microvolt = <1200000>;
72 regulator-max-microvolt = <1200000>;
73 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
75 vin-supply = <&buck7_reg>;
78 vcc33mhl: voltage-regulator-4 {
79 compatible = "regulator-fixed";
80 regulator-name = "VCC_3.3_MHL";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
83 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
87 vcc18mhl: voltage-regulator-5 {
88 compatible = "regulator-fixed";
89 regulator-name = "VCC_1.8_MHL";
90 regulator-min-microvolt = <1800000>;
91 regulator-max-microvolt = <1800000>;
92 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
96 touchkey_reg: voltage-regulator-6 {
97 compatible = "regulator-fixed";
98 regulator-name = "LED_VDD_3.3V";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
106 compatible = "gpio-keys";
107 pinctrl-names = "default";
108 pinctrl-0 = <&gpio_keys>;
111 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
113 label = "volume down";
114 debounce-interval = <10>;
118 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
121 debounce-interval = <10>;
125 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
128 debounce-interval = <10>;
133 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
136 debounce-interval = <10>;
141 i2c_max77693: i2c-gpio-1 {
142 compatible = "i2c-gpio";
143 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
144 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
145 i2c-gpio,delay-us = <2>;
146 #address-cells = <1>;
151 compatible = "maxim,max77693";
152 interrupt-parent = <&gpx1>;
153 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
154 pinctrl-names = "default";
155 pinctrl-0 = <&max77693_irq>;
159 esafeout1_reg: ESAFEOUT1 {
160 regulator-name = "ESAFEOUT1";
162 esafeout2_reg: ESAFEOUT2 {
163 regulator-name = "ESAFEOUT2";
165 charger_reg: CHARGER {
166 regulator-name = "CHARGER";
167 regulator-min-microamp = <60000>;
168 regulator-max-microamp = <2580000>;
173 compatible = "maxim,max77693-haptic";
174 haptic-supply = <&ldo26_reg>;
175 pwms = <&pwm 0 38022 0>;
179 compatible = "maxim,max77693-charger";
181 maxim,constant-microvolt = <4350000>;
182 maxim,min-system-microvolt = <3600000>;
183 maxim,thermal-regulation-celsius = <100>;
184 maxim,battery-overcurrent-microamp = <3500000>;
185 maxim,charge-input-threshold-microvolt = <4300000>;
190 i2c_max77693_fuel: i2c-gpio-3 {
191 compatible = "i2c-gpio";
192 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
193 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
194 i2c-gpio,delay-us = <2>;
195 #address-cells = <1>;
199 max77693-fuel-gauge@36 {
200 compatible = "maxim,max17047";
201 interrupt-parent = <&gpx2>;
202 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&max77693_fuel_irq>;
207 maxim,over-heat-temp = <700>;
208 maxim,over-volt = <4500>;
213 compatible = "i2c-gpio";
214 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
215 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
216 i2c-gpio,delay-us = <2>;
217 #address-cells = <1>;
221 compatible = "cypress,midas-touchkey";
223 vdd-supply = <&touchkey_reg>;
224 vcc-supply = <&ldo5_reg>;
225 interrupt-parent = <&gpj0>;
226 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
227 linux,keycodes = <KEY_BACK KEY_MENU>;
232 compatible = "i2c-gpio";
233 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
234 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
235 i2c-gpio,delay-us = <100>;
236 #address-cells = <1>;
239 pinctrl-0 = <&i2c_mhl_bus>;
240 pinctrl-names = "default";
243 sii9234: hdmi-bridge@39 {
244 compatible = "sil,sii9234";
245 avcc33-supply = <&vcc33mhl>;
246 iovcc18-supply = <&vcc18mhl>;
247 avcc12-supply = <&vsil12>;
248 cvcc12-supply = <&vsil12>;
249 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
250 interrupt-parent = <&gpf3>;
251 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
255 mhl_to_hdmi: endpoint {
256 remote-endpoint = <&hdmi_to_mhl>;
262 wlan_pwrseq: sdhci3-pwrseq {
263 compatible = "mmc-pwrseq-simple";
264 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
265 clocks = <&max77686 MAX77686_CLK_PMIC>;
266 clock-names = "ext_clock";
270 compatible = "samsung,trats2-audio";
271 samsung,i2s-controller = <&i2s0>;
272 samsung,model = "Trats2";
273 samsung,audio-codec = <&wm1811>;
274 samsung,audio-routing =
282 compatible = "murata,ncp15wb473";
283 pullup-uv = <1800000>; /* VCC_1.8V_AP */
284 pullup-ohm = <100000>; /* 100K */
285 pulldown-ohm = <100000>; /* 100K */
286 io-channels = <&adc 1>; /* AP temperature */
290 compatible = "murata,ncp15wb473";
291 pullup-uv = <1800000>; /* VCC_1.8V_AP */
292 pullup-ohm = <100000>; /* 100K */
293 pulldown-ohm = <100000>; /* 100K */
294 io-channels = <&adc 2>; /* Battery temperature */
298 cpu_thermal: cpu-thermal {
301 /* Corresponds to 800MHz at freq_table */
302 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
303 <&cpu2 7 7>, <&cpu3 7 7>;
306 /* Corresponds to 200MHz at freq_table */
307 cooling-device = <&cpu0 13 13>,
318 vdd-supply = <&ldo3_reg>;
323 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
324 vdd-supply = <&buck1_reg>;
329 devfreq = <&bus_dmc>;
334 devfreq = <&bus_dmc>;
339 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
340 vdd-supply = <&buck3_reg>;
345 devfreq = <&bus_leftbus>;
350 devfreq = <&bus_leftbus>;
355 devfreq = <&bus_leftbus>;
360 devfreq = <&bus_leftbus>;
365 devfreq = <&bus_leftbus>;
370 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
371 pinctrl-names = "default";
373 assigned-clocks = <&clock CLK_MOUT_CAM0>,
374 <&clock CLK_MOUT_CAM1>;
375 assigned-clock-parents = <&clock CLK_XUSBXTI>,
376 <&clock CLK_XUSBXTI>;
380 cpu0-supply = <&buck2_reg>;
385 vddcore-supply = <&ldo8_reg>;
386 vddio-supply = <&ldo10_reg>;
387 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
388 <&clock CLK_SCLK_CSIS0>;
389 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
390 assigned-clock-rates = <0>, <176000000>;
392 /* Camera C (3) MIPI CSI-2 (CSIS0) */
396 remote-endpoint = <&s5c73m3_ep>;
397 data-lanes = <1 2 3 4>;
398 samsung,csis-hs-settle = <12>;
405 vddcore-supply = <&ldo8_reg>;
406 vddio-supply = <&ldo10_reg>;
407 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
408 <&clock CLK_SCLK_CSIS1>;
409 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
410 assigned-clock-rates = <0>, <176000000>;
412 /* Camera D (4) MIPI CSI-2 (CSIS1) */
416 remote-endpoint = <&is_s5k6a3_ep>;
418 samsung,csis-hs-settle = <18>;
425 vddcore-supply = <&ldo8_reg>;
426 vddio-supply = <&ldo10_reg>;
427 samsung,burst-clock-frequency = <500000000>;
428 samsung,esc-clock-frequency = <20000000>;
429 samsung,pll-clock-frequency = <24000000>;
433 vbus-supply = <&esafeout1_reg>;
439 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
440 <&clock CLK_SCLK_FIMC0>;
441 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
442 assigned-clock-rates = <0>, <176000000>;
447 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
448 <&clock CLK_SCLK_FIMC1>;
449 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
450 assigned-clock-rates = <0>, <176000000>;
455 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
456 <&clock CLK_SCLK_FIMC2>;
457 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
458 assigned-clock-rates = <0>, <176000000>;
463 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
464 <&clock CLK_SCLK_FIMC3>;
465 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
466 assigned-clock-rates = <0>, <176000000>;
470 pinctrl-0 = <&fimc_is_uart>;
471 pinctrl-names = "default";
489 mali-supply = <&buck4_reg>;
494 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
495 pinctrl-names = "default";
496 pinctrl-0 = <&hdmi_hpd>;
497 vdd-supply = <&ldo3_reg>;
498 vdd_osc-supply = <&ldo4_reg>;
499 vdd_pll-supply = <&ldo3_reg>;
504 #address-cells = <1>;
509 hdmi_to_mhl: endpoint {
510 remote-endpoint = <&mhl_to_hdmi>;
517 vusb_d-supply = <&ldo15_reg>;
518 vusb_a-supply = <&ldo12_reg>;
519 dr_mode = "peripheral";
524 samsung,i2c-sda-delay = <100>;
525 samsung,i2c-slave-addr = <0x10>;
526 samsung,i2c-max-bus-freq = <400000>;
527 pinctrl-0 = <&i2c0_bus>;
528 pinctrl-names = "default";
531 s5c73m3: s5c73m3@3c {
532 compatible = "samsung,s5c73m3";
534 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
535 vdd-int-supply = <&buck9_reg>;
536 vddio-cis-supply = <&ldo9_reg>;
537 vddio-host-supply = <&ldo18_reg>;
538 vdd-af-supply = <&cam_af_reg>;
539 vdd-reg-supply = <&cam_io_reg>;
540 clock-frequency = <24000000>;
542 clocks = <&camera 0>;
543 clock-names = "cis_extclk";
546 s5c73m3_ep: endpoint {
547 remote-endpoint = <&csis0_ep>;
548 data-lanes = <1 2 3 4>;
555 pinctrl-0 = <&fimc_is_i2c1>;
556 pinctrl-names = "default";
559 compatible = "samsung,s5k6a3";
561 svdda-supply = <&cam_io_reg>;
562 svddio-supply = <&ldo19_reg>;
563 afvdd-supply = <&ldo19_reg>;
564 clock-frequency = <24000000>;
566 clocks = <&camera 1>;
567 clock-names = "extclk";
568 samsung,camclk-out = <1>;
569 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
572 is_s5k6a3_ep: endpoint {
573 remote-endpoint = <&csis1_ep>;
581 samsung,i2c-sda-delay = <100>;
582 samsung,i2c-slave-addr = <0x10>;
583 samsung,i2c-max-bus-freq = <400000>;
584 pinctrl-0 = <&i2c3_bus>;
585 pinctrl-names = "default";
590 samsung,i2c-sda-delay = <100>;
591 samsung,i2c-slave-addr = <0x10>;
592 samsung,i2c-max-bus-freq = <100000>;
593 pinctrl-0 = <&i2c4_bus>;
594 pinctrl-names = "default";
598 compatible = "wlf,wm1811";
600 clocks = <&pmu_system_controller 0>;
601 clock-names = "MCLK1";
602 DCVDD-supply = <&ldo3_reg>;
603 DBVDD1-supply = <&ldo3_reg>;
604 wlf,ldo1ena = <&gpj0 4 0>;
613 samsung,i2c-sda-delay = <100>;
614 samsung,i2c-slave-addr = <0x10>;
615 samsung,i2c-max-bus-freq = <100000>;
616 pinctrl-0 = <&i2c7_bus>;
617 pinctrl-names = "default";
620 max77686: max77686_pmic@9 {
621 compatible = "maxim,max77686";
622 interrupt-parent = <&gpx0>;
623 interrupts = <7 IRQ_TYPE_NONE>;
624 pinctrl-0 = <&max77686_irq>;
625 pinctrl-names = "default";
631 regulator-name = "VALIVE_1.0V_AP";
632 regulator-min-microvolt = <1000000>;
633 regulator-max-microvolt = <1000000>;
638 regulator-name = "VM1M2_1.2V_AP";
639 regulator-min-microvolt = <1200000>;
640 regulator-max-microvolt = <1200000>;
642 regulator-state-mem {
643 regulator-on-in-suspend;
648 regulator-name = "VCC_1.8V_AP";
649 regulator-min-microvolt = <1800000>;
650 regulator-max-microvolt = <1800000>;
655 regulator-name = "VCC_2.8V_AP";
656 regulator-min-microvolt = <2800000>;
657 regulator-max-microvolt = <2800000>;
662 regulator-name = "VCC_1.8V_IO";
663 regulator-min-microvolt = <1800000>;
664 regulator-max-microvolt = <1800000>;
669 regulator-name = "VMPLL_1.0V_AP";
670 regulator-min-microvolt = <1000000>;
671 regulator-max-microvolt = <1000000>;
673 regulator-state-mem {
674 regulator-on-in-suspend;
679 regulator-name = "VPLL_1.0V_AP";
680 regulator-min-microvolt = <1000000>;
681 regulator-max-microvolt = <1000000>;
683 regulator-state-mem {
684 regulator-on-in-suspend;
689 regulator-name = "VMIPI_1.0V";
690 regulator-min-microvolt = <1000000>;
691 regulator-max-microvolt = <1000000>;
692 regulator-state-mem {
693 regulator-off-in-suspend;
698 regulator-name = "CAM_ISP_MIPI_1.2V";
699 regulator-min-microvolt = <1200000>;
700 regulator-max-microvolt = <1200000>;
704 regulator-name = "VMIPI_1.8V";
705 regulator-min-microvolt = <1800000>;
706 regulator-max-microvolt = <1800000>;
707 regulator-state-mem {
708 regulator-off-in-suspend;
713 regulator-name = "VABB1_1.95V";
714 regulator-min-microvolt = <1950000>;
715 regulator-max-microvolt = <1950000>;
717 regulator-state-mem {
718 regulator-off-in-suspend;
723 regulator-name = "VUOTG_3.0V";
724 regulator-min-microvolt = <3000000>;
725 regulator-max-microvolt = <3000000>;
726 regulator-state-mem {
727 regulator-off-in-suspend;
732 regulator-name = "NFC_AVDD_1.8V";
733 regulator-min-microvolt = <1800000>;
734 regulator-max-microvolt = <1800000>;
738 regulator-name = "VABB2_1.95V";
739 regulator-min-microvolt = <1950000>;
740 regulator-max-microvolt = <1950000>;
742 regulator-state-mem {
743 regulator-off-in-suspend;
748 regulator-name = "VHSIC_1.0V";
749 regulator-min-microvolt = <1000000>;
750 regulator-max-microvolt = <1000000>;
751 regulator-state-mem {
752 regulator-on-in-suspend;
757 regulator-name = "VHSIC_1.8V";
758 regulator-min-microvolt = <1800000>;
759 regulator-max-microvolt = <1800000>;
760 regulator-state-mem {
761 regulator-on-in-suspend;
766 regulator-name = "CAM_SENSOR_CORE_1.2V";
767 regulator-min-microvolt = <1200000>;
768 regulator-max-microvolt = <1200000>;
772 regulator-name = "CAM_ISP_SEN_IO_1.8V";
773 regulator-min-microvolt = <1800000>;
774 regulator-max-microvolt = <1800000>;
778 regulator-name = "VT_CAM_1.8V";
779 regulator-min-microvolt = <1800000>;
780 regulator-max-microvolt = <1800000>;
784 regulator-name = "VDDQ_PRE_1.8V";
785 regulator-min-microvolt = <1800000>;
786 regulator-max-microvolt = <1800000>;
790 regulator-name = "VTF_2.8V";
791 regulator-min-microvolt = <2800000>;
792 regulator-max-microvolt = <2800000>;
793 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
797 regulator-name = "VMEM_VDD_2.8V";
798 regulator-min-microvolt = <2800000>;
799 regulator-max-microvolt = <2800000>;
800 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
804 regulator-name = "TSP_AVDD_3.3V";
805 regulator-min-microvolt = <3300000>;
806 regulator-max-microvolt = <3300000>;
810 regulator-name = "TSP_VDD_1.8V";
811 regulator-min-microvolt = <1800000>;
812 regulator-max-microvolt = <1800000>;
816 regulator-name = "LDO25";
820 regulator-name = "MOTOR_VCC_3.0V";
821 regulator-min-microvolt = <3000000>;
822 regulator-max-microvolt = <3000000>;
826 regulator-name = "VDD_MIF";
827 regulator-min-microvolt = <850000>;
828 regulator-max-microvolt = <1100000>;
831 regulator-state-mem {
832 regulator-off-in-suspend;
837 regulator-name = "VDD_ARM";
838 regulator-min-microvolt = <850000>;
839 regulator-max-microvolt = <1500000>;
842 regulator-state-mem {
843 regulator-on-in-suspend;
848 regulator-name = "VDD_INT";
849 regulator-min-microvolt = <850000>;
850 regulator-max-microvolt = <1150000>;
853 regulator-state-mem {
854 regulator-off-in-suspend;
859 regulator-name = "VDD_G3D";
860 regulator-min-microvolt = <850000>;
861 regulator-max-microvolt = <1150000>;
863 regulator-state-mem {
864 regulator-off-in-suspend;
869 regulator-name = "VMEM_1.2V_AP";
870 regulator-min-microvolt = <1200000>;
871 regulator-max-microvolt = <1200000>;
876 regulator-name = "VCC_SUB_1.35V";
877 regulator-min-microvolt = <1350000>;
878 regulator-max-microvolt = <1350000>;
883 regulator-name = "VCC_SUB_2.0V";
884 regulator-min-microvolt = <2000000>;
885 regulator-max-microvolt = <2000000>;
890 regulator-name = "VMEM_VDDF_3.0V";
891 regulator-min-microvolt = <2850000>;
892 regulator-max-microvolt = <2850000>;
893 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
897 regulator-name = "CAM_ISP_CORE_1.2V";
898 regulator-min-microvolt = <1000000>;
899 regulator-max-microvolt = <1200000>;
910 pinctrl-0 = <&i2s0_bus>;
911 pinctrl-names = "default";
922 card-detect-delay = <200>;
923 vmmc-supply = <&ldo22_reg>;
924 clock-frequency = <400000000>;
925 samsung,dw-mshc-ciu-div = <0>;
926 samsung,dw-mshc-sdr-timing = <2 3>;
927 samsung,dw-mshc-ddr-timing = <1 2>;
928 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
929 pinctrl-names = "default";
935 &pmu_system_controller {
936 assigned-clocks = <&pmu_system_controller 0>;
937 assigned-clock-parents = <&clock CLK_XUSBXTI>;
941 pinctrl-names = "default";
942 pinctrl-0 = <&sleep0>;
945 samsung,pins = "gpf3-5";
946 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
949 i2c_mhl_bus: i2c-mhl-bus {
950 samsung,pins = "gpf0-4", "gpf0-6";
951 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
952 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
953 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
956 sleep0: sleep-states {
957 PIN_SLP(gpa0-0, INPUT, NONE);
958 PIN_SLP(gpa0-1, OUT0, NONE);
959 PIN_SLP(gpa0-2, INPUT, NONE);
960 PIN_SLP(gpa0-3, INPUT, UP);
961 PIN_SLP(gpa0-4, INPUT, NONE);
962 PIN_SLP(gpa0-5, INPUT, DOWN);
963 PIN_SLP(gpa0-6, INPUT, DOWN);
964 PIN_SLP(gpa0-7, INPUT, UP);
966 PIN_SLP(gpa1-0, INPUT, DOWN);
967 PIN_SLP(gpa1-1, INPUT, DOWN);
968 PIN_SLP(gpa1-2, INPUT, DOWN);
969 PIN_SLP(gpa1-3, INPUT, DOWN);
970 PIN_SLP(gpa1-4, INPUT, DOWN);
971 PIN_SLP(gpa1-5, INPUT, DOWN);
973 PIN_SLP(gpb-0, INPUT, NONE);
974 PIN_SLP(gpb-1, INPUT, NONE);
975 PIN_SLP(gpb-2, INPUT, NONE);
976 PIN_SLP(gpb-3, INPUT, NONE);
977 PIN_SLP(gpb-4, INPUT, DOWN);
978 PIN_SLP(gpb-5, INPUT, UP);
979 PIN_SLP(gpb-6, INPUT, DOWN);
980 PIN_SLP(gpb-7, INPUT, DOWN);
982 PIN_SLP(gpc0-0, INPUT, DOWN);
983 PIN_SLP(gpc0-1, INPUT, DOWN);
984 PIN_SLP(gpc0-2, INPUT, DOWN);
985 PIN_SLP(gpc0-3, INPUT, DOWN);
986 PIN_SLP(gpc0-4, INPUT, DOWN);
988 PIN_SLP(gpc1-0, INPUT, NONE);
989 PIN_SLP(gpc1-1, PREV, NONE);
990 PIN_SLP(gpc1-2, INPUT, NONE);
991 PIN_SLP(gpc1-3, INPUT, NONE);
992 PIN_SLP(gpc1-4, INPUT, NONE);
994 PIN_SLP(gpd0-0, INPUT, DOWN);
995 PIN_SLP(gpd0-1, INPUT, DOWN);
996 PIN_SLP(gpd0-2, INPUT, NONE);
997 PIN_SLP(gpd0-3, INPUT, NONE);
999 PIN_SLP(gpd1-0, INPUT, DOWN);
1000 PIN_SLP(gpd1-1, INPUT, DOWN);
1001 PIN_SLP(gpd1-2, INPUT, NONE);
1002 PIN_SLP(gpd1-3, INPUT, NONE);
1004 PIN_SLP(gpf0-0, INPUT, NONE);
1005 PIN_SLP(gpf0-1, INPUT, NONE);
1006 PIN_SLP(gpf0-2, INPUT, DOWN);
1007 PIN_SLP(gpf0-3, INPUT, DOWN);
1008 PIN_SLP(gpf0-4, INPUT, NONE);
1009 PIN_SLP(gpf0-5, INPUT, DOWN);
1010 PIN_SLP(gpf0-6, INPUT, NONE);
1011 PIN_SLP(gpf0-7, INPUT, DOWN);
1013 PIN_SLP(gpf1-0, INPUT, DOWN);
1014 PIN_SLP(gpf1-1, INPUT, DOWN);
1015 PIN_SLP(gpf1-2, INPUT, DOWN);
1016 PIN_SLP(gpf1-3, INPUT, DOWN);
1017 PIN_SLP(gpf1-4, INPUT, NONE);
1018 PIN_SLP(gpf1-5, INPUT, NONE);
1019 PIN_SLP(gpf1-6, INPUT, DOWN);
1020 PIN_SLP(gpf1-7, PREV, NONE);
1022 PIN_SLP(gpf2-0, PREV, NONE);
1023 PIN_SLP(gpf2-1, INPUT, DOWN);
1024 PIN_SLP(gpf2-2, INPUT, DOWN);
1025 PIN_SLP(gpf2-3, INPUT, DOWN);
1026 PIN_SLP(gpf2-4, INPUT, DOWN);
1027 PIN_SLP(gpf2-5, INPUT, DOWN);
1028 PIN_SLP(gpf2-6, INPUT, NONE);
1029 PIN_SLP(gpf2-7, INPUT, NONE);
1031 PIN_SLP(gpf3-0, INPUT, NONE);
1032 PIN_SLP(gpf3-1, PREV, NONE);
1033 PIN_SLP(gpf3-2, PREV, NONE);
1034 PIN_SLP(gpf3-3, PREV, NONE);
1035 PIN_SLP(gpf3-4, OUT1, NONE);
1036 PIN_SLP(gpf3-5, INPUT, DOWN);
1038 PIN_SLP(gpj0-0, PREV, NONE);
1039 PIN_SLP(gpj0-1, PREV, NONE);
1040 PIN_SLP(gpj0-2, PREV, NONE);
1041 PIN_SLP(gpj0-3, INPUT, DOWN);
1042 PIN_SLP(gpj0-4, PREV, NONE);
1043 PIN_SLP(gpj0-5, PREV, NONE);
1044 PIN_SLP(gpj0-6, INPUT, DOWN);
1045 PIN_SLP(gpj0-7, INPUT, DOWN);
1047 PIN_SLP(gpj1-0, INPUT, DOWN);
1048 PIN_SLP(gpj1-1, PREV, NONE);
1049 PIN_SLP(gpj1-2, PREV, NONE);
1050 PIN_SLP(gpj1-3, INPUT, DOWN);
1051 PIN_SLP(gpj1-4, INPUT, DOWN);
1056 pinctrl-names = "default";
1057 pinctrl-0 = <&sleep1>;
1059 gpio_keys: gpio-keys {
1060 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1061 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1064 max77686_irq: max77686-irq {
1065 samsung,pins = "gpx0-7";
1066 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1069 max77693_irq: max77693-irq {
1070 samsung,pins = "gpx1-5";
1071 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1074 max77693_fuel_irq: max77693-fuel-irq {
1075 samsung,pins = "gpx2-3";
1076 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1079 sdhci2_cd: sdhci2-cd-irq {
1080 samsung,pins = "gpx3-4";
1081 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1084 hdmi_hpd: hdmi-hpd {
1085 samsung,pins = "gpx3-7";
1086 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1089 sleep1: sleep-states {
1090 PIN_SLP(gpk0-0, PREV, NONE);
1091 PIN_SLP(gpk0-1, PREV, NONE);
1092 PIN_SLP(gpk0-2, OUT0, NONE);
1093 PIN_SLP(gpk0-3, PREV, NONE);
1094 PIN_SLP(gpk0-4, PREV, NONE);
1095 PIN_SLP(gpk0-5, PREV, NONE);
1096 PIN_SLP(gpk0-6, PREV, NONE);
1098 PIN_SLP(gpk1-0, INPUT, DOWN);
1099 PIN_SLP(gpk1-1, INPUT, DOWN);
1100 PIN_SLP(gpk1-2, INPUT, DOWN);
1101 PIN_SLP(gpk1-3, PREV, NONE);
1102 PIN_SLP(gpk1-4, PREV, NONE);
1103 PIN_SLP(gpk1-5, PREV, NONE);
1104 PIN_SLP(gpk1-6, PREV, NONE);
1106 PIN_SLP(gpk2-0, INPUT, DOWN);
1107 PIN_SLP(gpk2-1, INPUT, DOWN);
1108 PIN_SLP(gpk2-2, INPUT, DOWN);
1109 PIN_SLP(gpk2-3, INPUT, DOWN);
1110 PIN_SLP(gpk2-4, INPUT, DOWN);
1111 PIN_SLP(gpk2-5, INPUT, DOWN);
1112 PIN_SLP(gpk2-6, INPUT, DOWN);
1114 PIN_SLP(gpk3-0, OUT0, NONE);
1115 PIN_SLP(gpk3-1, INPUT, NONE);
1116 PIN_SLP(gpk3-2, INPUT, DOWN);
1117 PIN_SLP(gpk3-3, INPUT, NONE);
1118 PIN_SLP(gpk3-4, INPUT, NONE);
1119 PIN_SLP(gpk3-5, INPUT, NONE);
1120 PIN_SLP(gpk3-6, INPUT, NONE);
1122 PIN_SLP(gpl0-0, INPUT, DOWN);
1123 PIN_SLP(gpl0-1, INPUT, DOWN);
1124 PIN_SLP(gpl0-2, INPUT, DOWN);
1125 PIN_SLP(gpl0-3, INPUT, DOWN);
1126 PIN_SLP(gpl0-4, PREV, NONE);
1127 PIN_SLP(gpl0-6, PREV, NONE);
1129 PIN_SLP(gpl1-0, INPUT, DOWN);
1130 PIN_SLP(gpl1-1, INPUT, DOWN);
1131 PIN_SLP(gpl2-0, INPUT, DOWN);
1132 PIN_SLP(gpl2-1, INPUT, DOWN);
1133 PIN_SLP(gpl2-2, INPUT, DOWN);
1134 PIN_SLP(gpl2-3, INPUT, DOWN);
1135 PIN_SLP(gpl2-4, INPUT, DOWN);
1136 PIN_SLP(gpl2-5, INPUT, DOWN);
1137 PIN_SLP(gpl2-6, PREV, NONE);
1138 PIN_SLP(gpl2-7, INPUT, DOWN);
1140 PIN_SLP(gpm0-0, INPUT, DOWN);
1141 PIN_SLP(gpm0-1, INPUT, DOWN);
1142 PIN_SLP(gpm0-2, INPUT, DOWN);
1143 PIN_SLP(gpm0-3, INPUT, DOWN);
1144 PIN_SLP(gpm0-4, INPUT, DOWN);
1145 PIN_SLP(gpm0-5, INPUT, DOWN);
1146 PIN_SLP(gpm0-6, INPUT, DOWN);
1147 PIN_SLP(gpm0-7, INPUT, DOWN);
1149 PIN_SLP(gpm1-0, INPUT, DOWN);
1150 PIN_SLP(gpm1-1, INPUT, DOWN);
1151 PIN_SLP(gpm1-2, INPUT, NONE);
1152 PIN_SLP(gpm1-3, INPUT, NONE);
1153 PIN_SLP(gpm1-4, INPUT, NONE);
1154 PIN_SLP(gpm1-5, INPUT, NONE);
1155 PIN_SLP(gpm1-6, INPUT, DOWN);
1157 PIN_SLP(gpm2-0, INPUT, NONE);
1158 PIN_SLP(gpm2-1, INPUT, NONE);
1159 PIN_SLP(gpm2-2, INPUT, DOWN);
1160 PIN_SLP(gpm2-3, INPUT, DOWN);
1161 PIN_SLP(gpm2-4, INPUT, DOWN);
1163 PIN_SLP(gpm3-0, PREV, NONE);
1164 PIN_SLP(gpm3-1, PREV, NONE);
1165 PIN_SLP(gpm3-2, PREV, NONE);
1166 PIN_SLP(gpm3-3, OUT1, NONE);
1167 PIN_SLP(gpm3-4, INPUT, DOWN);
1168 PIN_SLP(gpm3-5, INPUT, DOWN);
1169 PIN_SLP(gpm3-6, INPUT, DOWN);
1170 PIN_SLP(gpm3-7, INPUT, DOWN);
1172 PIN_SLP(gpm4-0, INPUT, DOWN);
1173 PIN_SLP(gpm4-1, INPUT, DOWN);
1174 PIN_SLP(gpm4-2, INPUT, DOWN);
1175 PIN_SLP(gpm4-3, INPUT, DOWN);
1176 PIN_SLP(gpm4-4, INPUT, DOWN);
1177 PIN_SLP(gpm4-5, INPUT, DOWN);
1178 PIN_SLP(gpm4-6, INPUT, DOWN);
1179 PIN_SLP(gpm4-7, INPUT, DOWN);
1181 PIN_SLP(gpy0-0, INPUT, DOWN);
1182 PIN_SLP(gpy0-1, INPUT, DOWN);
1183 PIN_SLP(gpy0-2, INPUT, DOWN);
1184 PIN_SLP(gpy0-3, INPUT, DOWN);
1185 PIN_SLP(gpy0-4, INPUT, DOWN);
1186 PIN_SLP(gpy0-5, INPUT, DOWN);
1188 PIN_SLP(gpy1-0, INPUT, DOWN);
1189 PIN_SLP(gpy1-1, INPUT, DOWN);
1190 PIN_SLP(gpy1-2, INPUT, DOWN);
1191 PIN_SLP(gpy1-3, INPUT, DOWN);
1193 PIN_SLP(gpy2-0, PREV, NONE);
1194 PIN_SLP(gpy2-1, INPUT, DOWN);
1195 PIN_SLP(gpy2-2, INPUT, NONE);
1196 PIN_SLP(gpy2-3, INPUT, NONE);
1197 PIN_SLP(gpy2-4, INPUT, NONE);
1198 PIN_SLP(gpy2-5, INPUT, NONE);
1200 PIN_SLP(gpy3-0, INPUT, DOWN);
1201 PIN_SLP(gpy3-1, INPUT, DOWN);
1202 PIN_SLP(gpy3-2, INPUT, DOWN);
1203 PIN_SLP(gpy3-3, INPUT, DOWN);
1204 PIN_SLP(gpy3-4, INPUT, DOWN);
1205 PIN_SLP(gpy3-5, INPUT, DOWN);
1206 PIN_SLP(gpy3-6, INPUT, DOWN);
1207 PIN_SLP(gpy3-7, INPUT, DOWN);
1209 PIN_SLP(gpy4-0, INPUT, DOWN);
1210 PIN_SLP(gpy4-1, INPUT, DOWN);
1211 PIN_SLP(gpy4-2, INPUT, DOWN);
1212 PIN_SLP(gpy4-3, INPUT, DOWN);
1213 PIN_SLP(gpy4-4, INPUT, DOWN);
1214 PIN_SLP(gpy4-5, INPUT, DOWN);
1215 PIN_SLP(gpy4-6, INPUT, DOWN);
1216 PIN_SLP(gpy4-7, INPUT, DOWN);
1218 PIN_SLP(gpy5-0, INPUT, DOWN);
1219 PIN_SLP(gpy5-1, INPUT, DOWN);
1220 PIN_SLP(gpy5-2, INPUT, DOWN);
1221 PIN_SLP(gpy5-3, INPUT, DOWN);
1222 PIN_SLP(gpy5-4, INPUT, DOWN);
1223 PIN_SLP(gpy5-5, INPUT, DOWN);
1224 PIN_SLP(gpy5-6, INPUT, DOWN);
1225 PIN_SLP(gpy5-7, INPUT, DOWN);
1227 PIN_SLP(gpy6-0, INPUT, DOWN);
1228 PIN_SLP(gpy6-1, INPUT, DOWN);
1229 PIN_SLP(gpy6-2, INPUT, DOWN);
1230 PIN_SLP(gpy6-3, INPUT, DOWN);
1231 PIN_SLP(gpy6-4, INPUT, DOWN);
1232 PIN_SLP(gpy6-5, INPUT, DOWN);
1233 PIN_SLP(gpy6-6, INPUT, DOWN);
1234 PIN_SLP(gpy6-7, INPUT, DOWN);
1239 pinctrl-names = "default";
1240 pinctrl-0 = <&sleep2>;
1242 sleep2: sleep-states {
1243 PIN_SLP(gpz-0, INPUT, DOWN);
1244 PIN_SLP(gpz-1, INPUT, DOWN);
1245 PIN_SLP(gpz-2, INPUT, DOWN);
1246 PIN_SLP(gpz-3, INPUT, DOWN);
1247 PIN_SLP(gpz-4, INPUT, DOWN);
1248 PIN_SLP(gpz-5, INPUT, DOWN);
1249 PIN_SLP(gpz-6, INPUT, DOWN);
1254 pinctrl-names = "default";
1255 pinctrl-0 = <&sleep3>;
1257 sleep3: sleep-states {
1258 PIN_SLP(gpv0-0, INPUT, DOWN);
1259 PIN_SLP(gpv0-1, INPUT, DOWN);
1260 PIN_SLP(gpv0-2, INPUT, DOWN);
1261 PIN_SLP(gpv0-3, INPUT, DOWN);
1262 PIN_SLP(gpv0-4, INPUT, DOWN);
1263 PIN_SLP(gpv0-5, INPUT, DOWN);
1264 PIN_SLP(gpv0-6, INPUT, DOWN);
1265 PIN_SLP(gpv0-7, INPUT, DOWN);
1267 PIN_SLP(gpv1-0, INPUT, DOWN);
1268 PIN_SLP(gpv1-1, INPUT, DOWN);
1269 PIN_SLP(gpv1-2, INPUT, DOWN);
1270 PIN_SLP(gpv1-3, INPUT, DOWN);
1271 PIN_SLP(gpv1-4, INPUT, DOWN);
1272 PIN_SLP(gpv1-5, INPUT, DOWN);
1273 PIN_SLP(gpv1-6, INPUT, DOWN);
1274 PIN_SLP(gpv1-7, INPUT, DOWN);
1276 PIN_SLP(gpv2-0, INPUT, DOWN);
1277 PIN_SLP(gpv2-1, INPUT, DOWN);
1278 PIN_SLP(gpv2-2, INPUT, DOWN);
1279 PIN_SLP(gpv2-3, INPUT, DOWN);
1280 PIN_SLP(gpv2-4, INPUT, DOWN);
1281 PIN_SLP(gpv2-5, INPUT, DOWN);
1282 PIN_SLP(gpv2-6, INPUT, DOWN);
1283 PIN_SLP(gpv2-7, INPUT, DOWN);
1285 PIN_SLP(gpv3-0, INPUT, DOWN);
1286 PIN_SLP(gpv3-1, INPUT, DOWN);
1287 PIN_SLP(gpv3-2, INPUT, DOWN);
1288 PIN_SLP(gpv3-3, INPUT, DOWN);
1289 PIN_SLP(gpv3-4, INPUT, DOWN);
1290 PIN_SLP(gpv3-5, INPUT, DOWN);
1291 PIN_SLP(gpv3-6, INPUT, DOWN);
1292 PIN_SLP(gpv3-7, INPUT, DOWN);
1294 PIN_SLP(gpv4-0, INPUT, DOWN);
1299 pinctrl-0 = <&pwm0_out>;
1300 pinctrl-names = "default";
1301 samsung,pwm-outputs = <0>;
1307 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1308 clock-names = "rtc", "rtc_src";
1313 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1314 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1315 pinctrl-names = "default";
1316 vmmc-supply = <&ldo21_reg>;
1321 #address-cells = <1>;
1326 mmc-pwrseq = <&wlan_pwrseq>;
1327 pinctrl-names = "default";
1328 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1333 compatible = "brcm,bcm4329-fmac";
1334 interrupt-parent = <&gpx2>;
1335 interrupts = <5 IRQ_TYPE_NONE>;
1336 interrupt-names = "host-wake";
1357 pinctrl-names = "default";
1358 pinctrl-0 = <&spi1_bus>;
1359 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1362 s5c73m3_spi: s5c73m3@0 {
1363 compatible = "samsung,s5c73m3";
1364 spi-max-frequency = <50000000>;
1367 samsung,spi-feedback-delay = <2>;
1373 vtmu-supply = <&ldo10_reg>;