arch/arm/boot/dts/exynos4412-midas.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's Exynos4412 based Trats 2 board device tree source
   4  *
   5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   6  *              http://www.samsung.com
   7  *
   8  * Device tree source file for Samsung's Trats 2 board which is based on
   9  * Samsung's Exynos4412 SoC.
  10  */
  11
  12 /dts-v1/;
  13 #include "exynos4412.dtsi"
  14 #include "exynos4412-ppmu-common.dtsi"
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/input/input.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18 #include <dt-bindings/clock/maxim,max77686.h>
  19 #include <dt-bindings/pinctrl/samsung.h>
  20
  21 / {
  22         compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
  23
  24         aliases {
  25                 i2c11 = &i2c_max77693;
  26                 i2c12 = &i2c_max77693_fuel;
  27         };
  28
  29         chosen {
  30                 stdout-path = &serial_2;
  31         };
  32
  33         firmware@204f000 {
  34                 compatible = "samsung,secure-firmware";
  35                 reg = <0x0204F000 0x1000>;
  36         };
  37
  38         fixed-rate-clocks {
  39                 xxti {
  40                         compatible = "samsung,clock-xxti";
  41                         clock-frequency = <0>;
  42                 };
  43
  44                 xusbxti {
  45                         compatible = "samsung,clock-xusbxti";
  46                         clock-frequency = <24000000>;
  47                 };
  48         };
  49
  50         cam_io_reg: voltage-regulator-1 {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "CAM_SENSOR_A";
  53                 regulator-min-microvolt = <2800000>;
  54                 regulator-max-microvolt = <2800000>;
  55                 enable-active-high;
  56                 status = "disabled";
  57         };
  58
  59         cam_af_reg: voltage-regulator-2 {
  60                 compatible = "regulator-fixed";
  61                 regulator-name = "CAM_AF";
  62                 regulator-min-microvolt = <2800000>;
  63                 regulator-max-microvolt = <2800000>;
  64                 enable-active-high;
  65                 status = "disabled";
  66         };
  67
  68         vsil12: voltage-regulator-3 {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "VSIL_1.2V";
  71                 regulator-min-microvolt = <1200000>;
  72                 regulator-max-microvolt = <1200000>;
  73                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  74                 enable-active-high;
  75                 vin-supply = <&buck7_reg>;
  76         };
  77
  78         vcc33mhl: voltage-regulator-4 {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "VCC_3.3_MHL";
  81                 regulator-min-microvolt = <3300000>;
  82                 regulator-max-microvolt = <3300000>;
  83                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  84                 enable-active-high;
  85         };
  86
  87         vcc18mhl: voltage-regulator-5 {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "VCC_1.8_MHL";
  90                 regulator-min-microvolt = <1800000>;
  91                 regulator-max-microvolt = <1800000>;
  92                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94         };
  95
  96         touchkey_reg: voltage-regulator-6 {
  97                 compatible = "regulator-fixed";
  98                 regulator-name = "LED_VDD_3.3V";
  99                 regulator-min-microvolt = <3300000>;
 100                 regulator-max-microvolt = <3300000>;
 101                 enable-active-high;
 102                 status = "disabled";
 103         };
 104
 105         vbatt_reg: voltage-regulator-7 {
 106                 compatible = "regulator-fixed";
 107                 regulator-name = "VBATT";
 108                 regulator-min-microvolt = <5000000>;
 109                 regulator-max-microvolt = <5000000>;
 110                 regulator-always-on;
 111         };
 112
 113         mic_bias_reg: voltage-regulator-8 {
 114                 compatible = "regulator-fixed";
 115                 regulator-name = "MICBIAS_LDO_2.8V";
 116                 regulator-min-microvolt = <2800000>;
 117                 regulator-max-microvolt = <2800000>;
 118                 gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
 119                 enable-active-high;
 120         };
 121
 122         submic_bias_reg: voltage-regulator-9 {
 123                 compatible = "regulator-fixed";
 124                 regulator-name = "SUB_MICBIAS_LDO_2.8V";
 125                 regulator-min-microvolt = <2800000>;
 126                 regulator-max-microvolt = <2800000>;
 127         };
 128
 129         gpio-keys {
 130                 compatible = "gpio-keys";
 131                 pinctrl-names = "default";
 132                 pinctrl-0 = <&gpio_keys>;
 133
 134                 key-down {
 135                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 136                         linux,code = <114>;
 137                         label = "volume down";
 138                         debounce-interval = <10>;
 139                 };
 140
 141                 key-up {
 142                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 143                         linux,code = <115>;
 144                         label = "volume up";
 145                         debounce-interval = <10>;
 146                 };
 147
 148                 key-power {
 149                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 150                         linux,code = <116>;
 151                         label = "power";
 152                         debounce-interval = <10>;
 153                         wakeup-source;
 154                 };
 155
 156                 key-ok {
 157                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 158                         linux,code = <139>;
 159                         label = "ok";
 160                         debounce-interval = <10>;
 161                         wakeup-source;
 162                 };
 163         };
 164
 165         i2c_max77693: i2c-gpio-1 {
 166                 compatible = "i2c-gpio";
 167                 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 168                 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 169                 i2c-gpio,delay-us = <2>;
 170                 #address-cells = <1>;
 171                 #size-cells = <0>;
 172                 status = "okay";
 173
 174                 max77693@66 {
 175                         compatible = "maxim,max77693";
 176                         interrupt-parent = <&gpx1>;
 177                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 178                         pinctrl-names = "default";
 179                         pinctrl-0 = <&max77693_irq>;
 180                         reg = <0x66>;
 181
 182                         regulators {
 183                                 esafeout1_reg: ESAFEOUT1 {
 184                                         regulator-name = "ESAFEOUT1";
 185                                 };
 186                                 esafeout2_reg: ESAFEOUT2 {
 187                                         regulator-name = "ESAFEOUT2";
 188                                 };
 189                                 charger_reg: CHARGER {
 190                                         regulator-name = "CHARGER";
 191                                         regulator-min-microamp = <60000>;
 192                                         regulator-max-microamp = <2580000>;
 193                                 };
 194                         };
 195
 196                         max77693_haptic {
 197                                 compatible = "maxim,max77693-haptic";
 198                                 haptic-supply = <&ldo26_reg>;
 199                                 pwms = <&pwm 0 38022 0>;
 200                         };
 201
 202                         charger {
 203                                 compatible = "maxim,max77693-charger";
 204
 205                                 maxim,constant-microvolt = <4350000>;
 206                                 maxim,min-system-microvolt = <3600000>;
 207                                 maxim,thermal-regulation-celsius = <100>;
 208                                 maxim,battery-overcurrent-microamp = <3500000>;
 209                                 maxim,charge-input-threshold-microvolt = <4300000>;
 210                         };
 211                 };
 212         };
 213
 214         i2c_max77693_fuel: i2c-gpio-3 {
 215                 compatible = "i2c-gpio";
 216                 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 217                 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 218                 i2c-gpio,delay-us = <2>;
 219                 #address-cells = <1>;
 220                 #size-cells = <0>;
 221                 status = "okay";
 222
 223                 max77693-fuel-gauge@36 {
 224                         compatible = "maxim,max17047";
 225                         interrupt-parent = <&gpx2>;
 226                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 227                         pinctrl-names = "default";
 228                         pinctrl-0 = <&max77693_fuel_irq>;
 229                         reg = <0x36>;
 230
 231                         maxim,over-heat-temp = <700>;
 232                         maxim,over-volt = <4500>;
 233                 };
 234         };
 235
 236         i2c-gpio-4 {
 237                 compatible = "i2c-gpio";
 238                 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 239                 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 240                 i2c-gpio,delay-us = <2>;
 241                 #address-cells = <1>;
 242                 #size-cells = <0>;
 243
 244                 touchkey@20 {
 245                         compatible = "cypress,midas-touchkey";
 246                         reg = <0x20>;
 247                         vdd-supply = <&touchkey_reg>;
 248                         vcc-supply = <&ldo5_reg>;
 249                         interrupt-parent = <&gpj0>;
 250                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 251                         linux,keycodes = <KEY_BACK KEY_MENU>;
 252                 };
 253         };
 254
 255         i2c-mhl {
 256                 compatible = "i2c-gpio";
 257                 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 258                 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 259                 i2c-gpio,delay-us = <100>;
 260                 #address-cells = <1>;
 261                 #size-cells = <0>;
 262
 263                 pinctrl-0 = <&i2c_mhl_bus>;
 264                 pinctrl-names = "default";
 265                 status = "okay";
 266
 267                 sii9234: hdmi-bridge@39 {
 268                         compatible = "sil,sii9234";
 269                         avcc33-supply = <&vcc33mhl>;
 270                         iovcc18-supply = <&vcc18mhl>;
 271                         avcc12-supply = <&vsil12>;
 272                         cvcc12-supply = <&vsil12>;
 273                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
 274                         interrupt-parent = <&gpf3>;
 275                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 276                         reg = <0x39>;
 277
 278                         port {
 279                                 mhl_to_hdmi: endpoint {
 280                                         remote-endpoint = <&hdmi_to_mhl>;
 281                                 };
 282                         };
 283                 };
 284         };
 285
 286         wlan_pwrseq: sdhci3-pwrseq {
 287                 compatible = "mmc-pwrseq-simple";
 288                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
 289                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 290                 clock-names = "ext_clock";
 291         };
 292
 293         sound: sound {
 294                 compatible = "samsung,midas-audio";
 295                 model = "Midas";
 296                 mic-bias-supply = <&mic_bias_reg>;
 297                 submic-bias-supply = <&submic_bias_reg>;
 298
 299                 cpu {
 300                         sound-dai = <&i2s0 0>;
 301                 };
 302                 codec {
 303                         sound-dai = <&wm1811>;
 304                 };
 305         };
 306
 307         thermistor-ap {
 308                 compatible = "murata,ncp15wb473";
 309                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 310                 pullup-ohm = <100000>;   /* 100K */
 311                 pulldown-ohm = <100000>; /* 100K */
 312                 io-channels = <&adc 1>;  /* AP temperature */
 313         };
 314
 315         thermistor-battery {
 316                 compatible = "murata,ncp15wb473";
 317                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 318                 pullup-ohm = <100000>;   /* 100K */
 319                 pulldown-ohm = <100000>; /* 100K */
 320                 io-channels = <&adc 2>;  /* Battery temperature */
 321         };
 322 };
 323
 324 &adc {
 325         vdd-supply = <&ldo3_reg>;
 326         status = "okay";
 327 };
 328
 329 &bus_dmc {
 330         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 331         vdd-supply = <&buck1_reg>;
 332         status = "okay";
 333 };
 334
 335 &bus_acp {
 336         devfreq = <&bus_dmc>;
 337         status = "okay";
 338 };
 339
 340 &bus_c2c {
 341         devfreq = <&bus_dmc>;
 342         status = "okay";
 343 };
 344
 345 &bus_leftbus {
 346         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 347         vdd-supply = <&buck3_reg>;
 348         status = "okay";
 349 };
 350
 351 &bus_rightbus {
 352         devfreq = <&bus_leftbus>;
 353         status = "okay";
 354 };
 355
 356 &bus_display {
 357         devfreq = <&bus_leftbus>;
 358         status = "okay";
 359 };
 360
 361 &bus_fsys {
 362         devfreq = <&bus_leftbus>;
 363         status = "okay";
 364 };
 365
 366 &bus_peri {
 367         devfreq = <&bus_leftbus>;
 368         status = "okay";
 369 };
 370
 371 &bus_mfc {
 372         devfreq = <&bus_leftbus>;
 373         status = "okay";
 374 };
 375
 376 &camera {
 377         pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 378         pinctrl-names = "default";
 379         status = "okay";
 380         assigned-clocks = <&clock CLK_MOUT_CAM0>,
 381                 <&clock CLK_MOUT_CAM1>;
 382         assigned-clock-parents = <&clock CLK_XUSBXTI>,
 383                 <&clock CLK_XUSBXTI>;
 384 };
 385
 386 &cpu0 {
 387         cpu0-supply = <&buck2_reg>;
 388 };
 389
 390 &cpu_thermal {
 391         cooling-maps {
 392                 map0 {
 393                         /* Corresponds to 800MHz at freq_table */
 394                         cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
 395                                          <&cpu2 7 7>, <&cpu3 7 7>;
 396                 };
 397                 map1 {
 398                         /* Corresponds to 200MHz at freq_table */
 399                         cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
 400                                          <&cpu2 13 13>, <&cpu3 13 13>;
 401                 };
 402         };
 403 };
 404
 405 &csis_0 {
 406         status = "okay";
 407         vddcore-supply = <&ldo8_reg>;
 408         vddio-supply = <&ldo10_reg>;
 409         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 410                         <&clock CLK_SCLK_CSIS0>;
 411         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 412         assigned-clock-rates = <0>, <176000000>;
 413
 414         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 415         port@3 {
 416                 reg = <3>;
 417                 csis0_ep: endpoint {
 418                         remote-endpoint = <&s5c73m3_ep>;
 419                         data-lanes = <1 2 3 4>;
 420                         samsung,csis-hs-settle = <12>;
 421                 };
 422         };
 423 };
 424
 425 &csis_1 {
 426         status = "okay";
 427         vddcore-supply = <&ldo8_reg>;
 428         vddio-supply = <&ldo10_reg>;
 429         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 430                         <&clock CLK_SCLK_CSIS1>;
 431         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 432         assigned-clock-rates = <0>, <176000000>;
 433
 434         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 435         port@4 {
 436                 reg = <4>;
 437                 csis1_ep: endpoint {
 438                         remote-endpoint = <&is_s5k6a3_ep>;
 439                         data-lanes = <1>;
 440                         samsung,csis-hs-settle = <18>;
 441                         samsung,csis-wclk;
 442                 };
 443         };
 444 };
 445
 446 &dsi_0 {
 447         vddcore-supply = <&ldo8_reg>;
 448         vddio-supply = <&ldo10_reg>;
 449         samsung,burst-clock-frequency = <500000000>;
 450         samsung,esc-clock-frequency = <20000000>;
 451         samsung,pll-clock-frequency = <24000000>;
 452 };
 453
 454 &exynos_usbphy {
 455         vbus-supply = <&esafeout1_reg>;
 456         status = "okay";
 457 };
 458
 459 &fimc_0 {
 460         status = "okay";
 461         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 462                         <&clock CLK_SCLK_FIMC0>;
 463         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 464         assigned-clock-rates = <0>, <176000000>;
 465 };
 466
 467 &fimc_1 {
 468         status = "okay";
 469         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 470                         <&clock CLK_SCLK_FIMC1>;
 471         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 472         assigned-clock-rates = <0>, <176000000>;
 473 };
 474
 475 &fimc_2 {
 476         status = "okay";
 477         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 478                         <&clock CLK_SCLK_FIMC2>;
 479         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 480         assigned-clock-rates = <0>, <176000000>;
 481 };
 482
 483 &fimc_3 {
 484         status = "okay";
 485         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 486                         <&clock CLK_SCLK_FIMC3>;
 487         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 488         assigned-clock-rates = <0>, <176000000>;
 489 };
 490
 491 &fimc_is {
 492         pinctrl-0 = <&fimc_is_uart>;
 493         pinctrl-names = "default";
 494         status = "okay";
 495
 496         };
 497
 498 &fimc_lite_0 {
 499         status = "okay";
 500 };
 501
 502 &fimc_lite_1 {
 503         status = "okay";
 504 };
 505
 506 &fimd {
 507         status = "okay";
 508 };
 509
 510 &gpu {
 511         mali-supply = <&buck4_reg>;
 512         status = "okay";
 513 };
 514
 515 &hdmi {
 516         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 517         pinctrl-names = "default";
 518         pinctrl-0 = <&hdmi_hpd>;
 519         vdd-supply = <&ldo3_reg>;
 520         vdd_osc-supply = <&ldo4_reg>;
 521         vdd_pll-supply = <&ldo3_reg>;
 522         ddc = <&i2c_5>;
 523         status = "okay";
 524
 525         ports {
 526                 #address-cells = <1>;
 527                 #size-cells = <0>;
 528
 529                 port@1 {
 530                         reg = <1>;
 531                         hdmi_to_mhl: endpoint {
 532                                 remote-endpoint = <&mhl_to_hdmi>;
 533                         };
 534                 };
 535         };
 536 };
 537
 538 &hsotg {
 539         vusb_d-supply = <&ldo15_reg>;
 540         vusb_a-supply = <&ldo12_reg>;
 541         dr_mode = "peripheral";
 542         status = "okay";
 543 };
 544
 545 &i2c_0 {
 546         samsung,i2c-sda-delay = <100>;
 547         samsung,i2c-slave-addr = <0x10>;
 548         samsung,i2c-max-bus-freq = <400000>;
 549         pinctrl-0 = <&i2c0_bus>;
 550         pinctrl-names = "default";
 551         status = "okay";
 552
 553         s5c73m3: s5c73m3@3c {
 554                 compatible = "samsung,s5c73m3";
 555                 reg = <0x3c>;
 556                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 557                 vdd-int-supply = <&buck9_reg>;
 558                 vddio-cis-supply = <&ldo9_reg>;
 559                 vddio-host-supply = <&ldo18_reg>;
 560                 vdd-af-supply = <&cam_af_reg>;
 561                 vdd-reg-supply = <&cam_io_reg>;
 562                 clock-frequency = <24000000>;
 563                 /* CAM_A_CLKOUT */
 564                 clocks = <&camera 0>;
 565                 clock-names = "cis_extclk";
 566                 status = "disabled";
 567                 port {
 568                         s5c73m3_ep: endpoint {
 569                                 remote-endpoint = <&csis0_ep>;
 570                                 data-lanes = <1 2 3 4>;
 571                         };
 572                 };
 573         };
 574 };
 575
 576 &i2c1_isp {
 577         pinctrl-0 = <&fimc_is_i2c1>;
 578         pinctrl-names = "default";
 579
 580         s5k6a3@10 {
 581                 compatible = "samsung,s5k6a3";
 582                 reg = <0x10>;
 583                 svdda-supply = <&cam_io_reg>;
 584                 svddio-supply = <&ldo19_reg>;
 585                 afvdd-supply = <&ldo19_reg>;
 586                 clock-frequency = <24000000>;
 587                 /* CAM_B_CLKOUT */
 588                 clocks = <&camera 1>;
 589                 clock-names = "extclk";
 590                 samsung,camclk-out = <1>;
 591                 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 592
 593                 port {
 594                         is_s5k6a3_ep: endpoint {
 595                                 remote-endpoint = <&csis1_ep>;
 596                                 data-lanes = <1>;
 597                         };
 598                 };
 599         };
 600 };
 601
 602 &i2c_3 {
 603         samsung,i2c-sda-delay = <100>;
 604         samsung,i2c-slave-addr = <0x10>;
 605         samsung,i2c-max-bus-freq = <400000>;
 606         pinctrl-0 = <&i2c3_bus>;
 607         pinctrl-names = "default";
 608         status = "okay";
 609 };
 610
 611 &i2c_4 {
 612         samsung,i2c-sda-delay = <100>;
 613         samsung,i2c-slave-addr = <0x10>;
 614         samsung,i2c-max-bus-freq = <100000>;
 615         pinctrl-0 = <&i2c4_bus>;
 616         pinctrl-names = "default";
 617         status = "okay";
 618
 619         wm1811: wm1811@1a {
 620                 compatible = "wlf,wm1811";
 621                 reg = <0x1a>;
 622                 clocks = <&pmu_system_controller 0>,
 623                         <&max77686 MAX77686_CLK_PMIC>;
 624                 clock-names = "MCLK1", "MCLK2";
 625                 interrupt-controller;
 626                 #interrupt-cells = <2>;
 627                 interrupt-parent = <&gpx3>;
 628                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 629
 630                 gpio-controller;
 631                 #gpio-cells = <2>;
 632                 #sound-dai-cells = <0>;
 633
 634                 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
 635                         0x0 0x8000 0x0 0x0 0x0>;
 636                 wlf,micbias-cfg = <0x2f 0x2b>;
 637
 638                 wlf,lineout1-feedback;
 639                 wlf,lineout1-se;
 640                 wlf,lineout2-se;
 641                 wlf,ldoena-always-driven;
 642
 643                 AVDD2-supply = <&vbatt_reg>;
 644                 DBVDD1-supply = <&ldo3_reg>;
 645                 DBVDD2-supply = <&vbatt_reg>;
 646                 DBVDD3-supply = <&vbatt_reg>;
 647                 DCVDD-supply = <&ldo3_reg>;
 648                 CPVDD-supply = <&vbatt_reg>;
 649                 SPKVDD1-supply = <&vbatt_reg>;
 650                 SPKVDD2-supply = <&vbatt_reg>;
 651                 wlf,ldo1ena = <&gpj0 4 0>;
 652                 wlf,ldo2ena = <&gpj0 4 0>;
 653         };
 654 };
 655
 656 &i2c_5 {
 657         status = "okay";
 658 };
 659
 660 &i2c_7 {
 661         samsung,i2c-sda-delay = <100>;
 662         samsung,i2c-slave-addr = <0x10>;
 663         samsung,i2c-max-bus-freq = <100000>;
 664         pinctrl-0 = <&i2c7_bus>;
 665         pinctrl-names = "default";
 666         status = "okay";
 667
 668         max77686: max77686_pmic@9 {
 669                 compatible = "maxim,max77686";
 670                 interrupt-parent = <&gpx0>;
 671                 interrupts = <7 IRQ_TYPE_NONE>;
 672                 pinctrl-0 = <&max77686_irq>;
 673                 pinctrl-names = "default";
 674                 reg = <0x09>;
 675                 #clock-cells = <1>;
 676
 677                 voltage-regulators {
 678                         ldo1_reg: LDO1 {
 679                                 regulator-name = "VALIVE_1.0V_AP";
 680                                 regulator-min-microvolt = <1000000>;
 681                                 regulator-max-microvolt = <1000000>;
 682                                 regulator-always-on;
 683                         };
 684
 685                         ldo2_reg: LDO2 {
 686                                 regulator-name = "VM1M2_1.2V_AP";
 687                                 regulator-min-microvolt = <1200000>;
 688                                 regulator-max-microvolt = <1200000>;
 689                                 regulator-always-on;
 690                                 regulator-state-mem {
 691                                         regulator-on-in-suspend;
 692                                 };
 693                         };
 694
 695                         ldo3_reg: LDO3 {
 696                                 regulator-name = "VCC_1.8V_AP";
 697                                 regulator-min-microvolt = <1800000>;
 698                                 regulator-max-microvolt = <1800000>;
 699                                 regulator-always-on;
 700                         };
 701
 702                         ldo4_reg: LDO4 {
 703                                 regulator-name = "VCC_2.8V_AP";
 704                                 regulator-min-microvolt = <2800000>;
 705                                 regulator-max-microvolt = <2800000>;
 706                                 regulator-always-on;
 707                         };
 708
 709                         ldo5_reg: LDO5 {
 710                                 regulator-name = "VCC_1.8V_IO";
 711                                 regulator-min-microvolt = <1800000>;
 712                                 regulator-max-microvolt = <1800000>;
 713                                 regulator-always-on;
 714                         };
 715
 716                         ldo6_reg: LDO6 {
 717                                 regulator-name = "VMPLL_1.0V_AP";
 718                                 regulator-min-microvolt = <1000000>;
 719                                 regulator-max-microvolt = <1000000>;
 720                                 regulator-always-on;
 721                                 regulator-state-mem {
 722                                         regulator-on-in-suspend;
 723                                 };
 724                         };
 725
 726                         ldo7_reg: LDO7 {
 727                                 regulator-name = "VPLL_1.0V_AP";
 728                                 regulator-min-microvolt = <1000000>;
 729                                 regulator-max-microvolt = <1000000>;
 730                                 regulator-always-on;
 731                                 regulator-state-mem {
 732                                         regulator-on-in-suspend;
 733                                 };
 734                         };
 735
 736                         ldo8_reg: LDO8 {
 737                                 regulator-name = "VMIPI_1.0V";
 738                                 regulator-min-microvolt = <1000000>;
 739                                 regulator-max-microvolt = <1000000>;
 740                                 regulator-state-mem {
 741                                         regulator-off-in-suspend;
 742                                 };
 743                         };
 744
 745                         ldo9_reg: LDO9 {
 746                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 747                                 regulator-min-microvolt = <1200000>;
 748                                 regulator-max-microvolt = <1200000>;
 749                         };
 750
 751                         ldo10_reg: LDO10 {
 752                                 regulator-name = "VMIPI_1.8V";
 753                                 regulator-min-microvolt = <1800000>;
 754                                 regulator-max-microvolt = <1800000>;
 755                                 regulator-state-mem {
 756                                         regulator-off-in-suspend;
 757                                 };
 758                         };
 759
 760                         ldo11_reg: LDO11 {
 761                                 regulator-name = "VABB1_1.95V";
 762                                 regulator-min-microvolt = <1950000>;
 763                                 regulator-max-microvolt = <1950000>;
 764                                 regulator-always-on;
 765                                 regulator-state-mem {
 766                                         regulator-off-in-suspend;
 767                                 };
 768                         };
 769
 770                         ldo12_reg: LDO12 {
 771                                 regulator-name = "VUOTG_3.0V";
 772                                 regulator-min-microvolt = <3000000>;
 773                                 regulator-max-microvolt = <3000000>;
 774                                 regulator-state-mem {
 775                                         regulator-off-in-suspend;
 776                                 };
 777                         };
 778
 779                         ldo13_reg: LDO13 {
 780                                 regulator-name = "NFC_AVDD_1.8V";
 781                                 regulator-min-microvolt = <1800000>;
 782                                 regulator-max-microvolt = <1800000>;
 783                         };
 784
 785                         ldo14_reg: LDO14 {
 786                                 regulator-name = "VABB2_1.95V";
 787                                 regulator-min-microvolt = <1950000>;
 788                                 regulator-max-microvolt = <1950000>;
 789                                 regulator-always-on;
 790                                 regulator-state-mem {
 791                                         regulator-off-in-suspend;
 792                                 };
 793                         };
 794
 795                         ldo15_reg: LDO15 {
 796                                 regulator-name = "VHSIC_1.0V";
 797                                 regulator-min-microvolt = <1000000>;
 798                                 regulator-max-microvolt = <1000000>;
 799                                 regulator-state-mem {
 800                                         regulator-on-in-suspend;
 801                                 };
 802                         };
 803
 804                         ldo16_reg: LDO16 {
 805                                 regulator-name = "VHSIC_1.8V";
 806                                 regulator-min-microvolt = <1800000>;
 807                                 regulator-max-microvolt = <1800000>;
 808                                 regulator-state-mem {
 809                                         regulator-on-in-suspend;
 810                                 };
 811                         };
 812
 813                         ldo17_reg: LDO17 {
 814                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 815                                 regulator-min-microvolt = <1200000>;
 816                                 regulator-max-microvolt = <1200000>;
 817                         };
 818
 819                         ldo18_reg: LDO18 {
 820                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 821                                 regulator-min-microvolt = <1800000>;
 822                                 regulator-max-microvolt = <1800000>;
 823                         };
 824
 825                         ldo19_reg: LDO19 {
 826                                 regulator-name = "VT_CAM_1.8V";
 827                                 regulator-min-microvolt = <1800000>;
 828                                 regulator-max-microvolt = <1800000>;
 829                         };
 830
 831                         ldo20_reg: LDO20 {
 832                                 regulator-name = "VDDQ_PRE_1.8V";
 833                                 regulator-min-microvolt = <1800000>;
 834                                 regulator-max-microvolt = <1800000>;
 835                         };
 836
 837                         ldo21_reg: LDO21 {
 838                                 regulator-name = "VTF_2.8V";
 839                                 regulator-min-microvolt = <2800000>;
 840                                 regulator-max-microvolt = <2800000>;
 841                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 842                         };
 843
 844                         ldo22_reg: LDO22 {
 845                                 regulator-name = "VMEM_VDD_2.8V";
 846                                 regulator-min-microvolt = <2800000>;
 847                                 regulator-max-microvolt = <2800000>;
 848                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 849                         };
 850
 851                         ldo23_reg: LDO23 {
 852                                 regulator-name = "TSP_AVDD_3.3V";
 853                                 regulator-min-microvolt = <3300000>;
 854                                 regulator-max-microvolt = <3300000>;
 855                         };
 856
 857                         ldo24_reg: LDO24 {
 858                                 regulator-name = "TSP_VDD_1.8V";
 859                                 regulator-min-microvolt = <1800000>;
 860                                 regulator-max-microvolt = <1800000>;
 861                         };
 862
 863                         ldo25_reg: LDO25 {
 864                                 regulator-name = "LDO25";
 865                         };
 866
 867                         ldo26_reg: LDO26 {
 868                                 regulator-name = "MOTOR_VCC_3.0V";
 869                                 regulator-min-microvolt = <3000000>;
 870                                 regulator-max-microvolt = <3000000>;
 871                         };
 872
 873                         buck1_reg: BUCK1 {
 874                                 regulator-name = "VDD_MIF";
 875                                 regulator-min-microvolt = <850000>;
 876                                 regulator-max-microvolt = <1100000>;
 877                                 regulator-always-on;
 878                                 regulator-boot-on;
 879                                 regulator-state-mem {
 880                                         regulator-off-in-suspend;
 881                                 };
 882                         };
 883
 884                         buck2_reg: BUCK2 {
 885                                 regulator-name = "VDD_ARM";
 886                                 regulator-min-microvolt = <850000>;
 887                                 regulator-max-microvolt = <1500000>;
 888                                 regulator-always-on;
 889                                 regulator-boot-on;
 890                                 regulator-state-mem {
 891                                         regulator-on-in-suspend;
 892                                 };
 893                         };
 894
 895                         buck3_reg: BUCK3 {
 896                                 regulator-name = "VDD_INT";
 897                                 regulator-min-microvolt = <850000>;
 898                                 regulator-max-microvolt = <1150000>;
 899                                 regulator-always-on;
 900                                 regulator-boot-on;
 901                                 regulator-state-mem {
 902                                         regulator-off-in-suspend;
 903                                 };
 904                         };
 905
 906                         buck4_reg: BUCK4 {
 907                                 regulator-name = "VDD_G3D";
 908                                 regulator-min-microvolt = <850000>;
 909                                 regulator-max-microvolt = <1150000>;
 910                                 regulator-boot-on;
 911                                 regulator-state-mem {
 912                                         regulator-off-in-suspend;
 913                                 };
 914                         };
 915
 916                         buck5_reg: BUCK5 {
 917                                 regulator-name = "VMEM_1.2V_AP";
 918                                 regulator-min-microvolt = <1200000>;
 919                                 regulator-max-microvolt = <1200000>;
 920                                 regulator-always-on;
 921                         };
 922
 923                         buck6_reg: BUCK6 {
 924                                 regulator-name = "VCC_SUB_1.35V";
 925                                 regulator-min-microvolt = <1350000>;
 926                                 regulator-max-microvolt = <1350000>;
 927                                 regulator-always-on;
 928                         };
 929
 930                         buck7_reg: BUCK7 {
 931                                 regulator-name = "VCC_SUB_2.0V";
 932                                 regulator-min-microvolt = <2000000>;
 933                                 regulator-max-microvolt = <2000000>;
 934                                 regulator-always-on;
 935                         };
 936
 937                         buck8_reg: BUCK8 {
 938                                 regulator-name = "VMEM_VDDF_3.0V";
 939                                 regulator-min-microvolt = <2850000>;
 940                                 regulator-max-microvolt = <2850000>;
 941                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 942                         };
 943
 944                         buck9_reg: BUCK9 {
 945                                 regulator-name = "CAM_ISP_CORE_1.2V";
 946                                 regulator-min-microvolt = <1000000>;
 947                                 regulator-max-microvolt = <1200000>;
 948                         };
 949                 };
 950         };
 951 };
 952
 953 &i2c_8 {
 954         status = "okay";
 955 };
 956
 957 &i2s0 {
 958         pinctrl-0 = <&i2s0_bus>;
 959         pinctrl-names = "default";
 960         status = "okay";
 961 };
 962
 963 &mixer {
 964         status = "okay";
 965 };
 966
 967 &mshc_0 {
 968         broken-cd;
 969         non-removable;
 970         card-detect-delay = <200>;
 971         vmmc-supply = <&ldo22_reg>;
 972         clock-frequency = <400000000>;
 973         samsung,dw-mshc-ciu-div = <0>;
 974         samsung,dw-mshc-sdr-timing = <2 3>;
 975         samsung,dw-mshc-ddr-timing = <1 2>;
 976         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 977         pinctrl-names = "default";
 978         status = "okay";
 979         bus-width = <8>;
 980         cap-mmc-highspeed;
 981 };
 982
 983 &pmu_system_controller {
 984         assigned-clocks = <&pmu_system_controller 0>;
 985         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 986 };
 987
 988 &pinctrl_0 {
 989         pinctrl-names = "default";
 990         pinctrl-0 = <&sleep0>;
 991
 992         mhl_int: mhl-int {
 993                 samsung,pins = "gpf3-5";
 994                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 995         };
 996
 997         i2c_mhl_bus: i2c-mhl-bus {
 998                 samsung,pins = "gpf0-4", "gpf0-6";
 999                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
1000                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1001                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1002         };
1003
1004         sleep0: sleep-states {
1005                 PIN_SLP(gpa0-0, INPUT, NONE);
1006                 PIN_SLP(gpa0-1, OUT0, NONE);
1007                 PIN_SLP(gpa0-2, INPUT, NONE);
1008                 PIN_SLP(gpa0-3, INPUT, UP);
1009                 PIN_SLP(gpa0-4, INPUT, NONE);
1010                 PIN_SLP(gpa0-5, INPUT, DOWN);
1011                 PIN_SLP(gpa0-6, INPUT, DOWN);
1012                 PIN_SLP(gpa0-7, INPUT, UP);
1013
1014                 PIN_SLP(gpa1-0, INPUT, DOWN);
1015                 PIN_SLP(gpa1-1, INPUT, DOWN);
1016                 PIN_SLP(gpa1-2, INPUT, DOWN);
1017                 PIN_SLP(gpa1-3, INPUT, DOWN);
1018                 PIN_SLP(gpa1-4, INPUT, DOWN);
1019                 PIN_SLP(gpa1-5, INPUT, DOWN);
1020
1021                 PIN_SLP(gpb-0, INPUT, NONE);
1022                 PIN_SLP(gpb-1, INPUT, NONE);
1023                 PIN_SLP(gpb-2, INPUT, NONE);
1024                 PIN_SLP(gpb-3, INPUT, NONE);
1025                 PIN_SLP(gpb-4, INPUT, DOWN);
1026                 PIN_SLP(gpb-5, INPUT, UP);
1027                 PIN_SLP(gpb-6, INPUT, DOWN);
1028                 PIN_SLP(gpb-7, INPUT, DOWN);
1029
1030                 PIN_SLP(gpc0-0, INPUT, DOWN);
1031                 PIN_SLP(gpc0-1, INPUT, DOWN);
1032                 PIN_SLP(gpc0-2, INPUT, DOWN);
1033                 PIN_SLP(gpc0-3, INPUT, DOWN);
1034                 PIN_SLP(gpc0-4, INPUT, DOWN);
1035
1036                 PIN_SLP(gpc1-0, INPUT, NONE);
1037                 PIN_SLP(gpc1-1, PREV, NONE);
1038                 PIN_SLP(gpc1-2, INPUT, NONE);
1039                 PIN_SLP(gpc1-3, INPUT, NONE);
1040                 PIN_SLP(gpc1-4, INPUT, NONE);
1041
1042                 PIN_SLP(gpd0-0, INPUT, DOWN);
1043                 PIN_SLP(gpd0-1, INPUT, DOWN);
1044                 PIN_SLP(gpd0-2, INPUT, NONE);
1045                 PIN_SLP(gpd0-3, INPUT, NONE);
1046
1047                 PIN_SLP(gpd1-0, INPUT, DOWN);
1048                 PIN_SLP(gpd1-1, INPUT, DOWN);
1049                 PIN_SLP(gpd1-2, INPUT, NONE);
1050                 PIN_SLP(gpd1-3, INPUT, NONE);
1051
1052                 PIN_SLP(gpf0-0, INPUT, NONE);
1053                 PIN_SLP(gpf0-1, INPUT, NONE);
1054                 PIN_SLP(gpf0-2, INPUT, DOWN);
1055                 PIN_SLP(gpf0-3, INPUT, DOWN);
1056                 PIN_SLP(gpf0-4, INPUT, NONE);
1057                 PIN_SLP(gpf0-5, INPUT, DOWN);
1058                 PIN_SLP(gpf0-6, INPUT, NONE);
1059                 PIN_SLP(gpf0-7, INPUT, DOWN);
1060
1061                 PIN_SLP(gpf1-0, INPUT, DOWN);
1062                 PIN_SLP(gpf1-1, INPUT, DOWN);
1063                 PIN_SLP(gpf1-2, INPUT, DOWN);
1064                 PIN_SLP(gpf1-3, INPUT, DOWN);
1065                 PIN_SLP(gpf1-4, INPUT, NONE);
1066                 PIN_SLP(gpf1-5, INPUT, NONE);
1067                 PIN_SLP(gpf1-6, INPUT, DOWN);
1068                 PIN_SLP(gpf1-7, PREV, NONE);
1069
1070                 PIN_SLP(gpf2-0, PREV, NONE);
1071                 PIN_SLP(gpf2-1, INPUT, DOWN);
1072                 PIN_SLP(gpf2-2, INPUT, DOWN);
1073                 PIN_SLP(gpf2-3, INPUT, DOWN);
1074                 PIN_SLP(gpf2-4, INPUT, DOWN);
1075                 PIN_SLP(gpf2-5, INPUT, DOWN);
1076                 PIN_SLP(gpf2-6, INPUT, NONE);
1077                 PIN_SLP(gpf2-7, INPUT, NONE);
1078
1079                 PIN_SLP(gpf3-0, INPUT, NONE);
1080                 PIN_SLP(gpf3-1, PREV, NONE);
1081                 PIN_SLP(gpf3-2, PREV, NONE);
1082                 PIN_SLP(gpf3-3, PREV, NONE);
1083                 PIN_SLP(gpf3-4, OUT1, NONE);
1084                 PIN_SLP(gpf3-5, INPUT, DOWN);
1085
1086                 PIN_SLP(gpj0-0, PREV, NONE);
1087                 PIN_SLP(gpj0-1, PREV, NONE);
1088                 PIN_SLP(gpj0-2, PREV, NONE);
1089                 PIN_SLP(gpj0-3, INPUT, DOWN);
1090                 PIN_SLP(gpj0-4, PREV, NONE);
1091                 PIN_SLP(gpj0-5, PREV, NONE);
1092                 PIN_SLP(gpj0-6, INPUT, DOWN);
1093                 PIN_SLP(gpj0-7, INPUT, DOWN);
1094
1095                 PIN_SLP(gpj1-0, INPUT, DOWN);
1096                 PIN_SLP(gpj1-1, PREV, NONE);
1097                 PIN_SLP(gpj1-2, PREV, NONE);
1098                 PIN_SLP(gpj1-3, INPUT, DOWN);
1099                 PIN_SLP(gpj1-4, INPUT, DOWN);
1100         };
1101 };
1102
1103 &pinctrl_1 {
1104         pinctrl-names = "default";
1105         pinctrl-0 = <&sleep1>;
1106
1107         gpio_keys: gpio-keys {
1108                 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1109                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1110         };
1111
1112         max77686_irq: max77686-irq {
1113                 samsung,pins = "gpx0-7";
1114                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1115         };
1116
1117         max77693_irq: max77693-irq {
1118                 samsung,pins = "gpx1-5";
1119                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1120         };
1121
1122         max77693_fuel_irq: max77693-fuel-irq {
1123                 samsung,pins = "gpx2-3";
1124                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1125         };
1126
1127         sdhci2_cd: sdhci2-cd-irq {
1128                 samsung,pins = "gpx3-4";
1129                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1130         };
1131
1132         hdmi_hpd: hdmi-hpd {
1133                 samsung,pins = "gpx3-7";
1134                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1135         };
1136
1137         sleep1: sleep-states {
1138                 PIN_SLP(gpk0-0, PREV, NONE);
1139                 PIN_SLP(gpk0-1, PREV, NONE);
1140                 PIN_SLP(gpk0-2, OUT0, NONE);
1141                 PIN_SLP(gpk0-3, PREV, NONE);
1142                 PIN_SLP(gpk0-4, PREV, NONE);
1143                 PIN_SLP(gpk0-5, PREV, NONE);
1144                 PIN_SLP(gpk0-6, PREV, NONE);
1145
1146                 PIN_SLP(gpk1-0, INPUT, DOWN);
1147                 PIN_SLP(gpk1-1, INPUT, DOWN);
1148                 PIN_SLP(gpk1-2, INPUT, DOWN);
1149                 PIN_SLP(gpk1-3, PREV, NONE);
1150                 PIN_SLP(gpk1-4, PREV, NONE);
1151                 PIN_SLP(gpk1-5, PREV, NONE);
1152                 PIN_SLP(gpk1-6, PREV, NONE);
1153
1154                 PIN_SLP(gpk2-0, INPUT, DOWN);
1155                 PIN_SLP(gpk2-1, INPUT, DOWN);
1156                 PIN_SLP(gpk2-2, INPUT, DOWN);
1157                 PIN_SLP(gpk2-3, INPUT, DOWN);
1158                 PIN_SLP(gpk2-4, INPUT, DOWN);
1159                 PIN_SLP(gpk2-5, INPUT, DOWN);
1160                 PIN_SLP(gpk2-6, INPUT, DOWN);
1161
1162                 PIN_SLP(gpk3-0, OUT0, NONE);
1163                 PIN_SLP(gpk3-1, INPUT, NONE);
1164                 PIN_SLP(gpk3-2, INPUT, DOWN);
1165                 PIN_SLP(gpk3-3, INPUT, NONE);
1166                 PIN_SLP(gpk3-4, INPUT, NONE);
1167                 PIN_SLP(gpk3-5, INPUT, NONE);
1168                 PIN_SLP(gpk3-6, INPUT, NONE);
1169
1170                 PIN_SLP(gpl0-0, INPUT, DOWN);
1171                 PIN_SLP(gpl0-1, INPUT, DOWN);
1172                 PIN_SLP(gpl0-2, INPUT, DOWN);
1173                 PIN_SLP(gpl0-3, INPUT, DOWN);
1174                 PIN_SLP(gpl0-4, PREV, NONE);
1175                 PIN_SLP(gpl0-6, PREV, NONE);
1176
1177                 PIN_SLP(gpl1-0, INPUT, DOWN);
1178                 PIN_SLP(gpl1-1, INPUT, DOWN);
1179                 PIN_SLP(gpl2-0, INPUT, DOWN);
1180                 PIN_SLP(gpl2-1, INPUT, DOWN);
1181                 PIN_SLP(gpl2-2, INPUT, DOWN);
1182                 PIN_SLP(gpl2-3, INPUT, DOWN);
1183                 PIN_SLP(gpl2-4, INPUT, DOWN);
1184                 PIN_SLP(gpl2-5, INPUT, DOWN);
1185                 PIN_SLP(gpl2-6, PREV, NONE);
1186                 PIN_SLP(gpl2-7, INPUT, DOWN);
1187
1188                 PIN_SLP(gpm0-0, INPUT, DOWN);
1189                 PIN_SLP(gpm0-1, INPUT, DOWN);
1190                 PIN_SLP(gpm0-2, INPUT, DOWN);
1191                 PIN_SLP(gpm0-3, INPUT, DOWN);
1192                 PIN_SLP(gpm0-4, INPUT, DOWN);
1193                 PIN_SLP(gpm0-5, INPUT, DOWN);
1194                 PIN_SLP(gpm0-6, INPUT, DOWN);
1195                 PIN_SLP(gpm0-7, INPUT, DOWN);
1196
1197                 PIN_SLP(gpm1-0, INPUT, DOWN);
1198                 PIN_SLP(gpm1-1, INPUT, DOWN);
1199                 PIN_SLP(gpm1-2, INPUT, NONE);
1200                 PIN_SLP(gpm1-3, INPUT, NONE);
1201                 PIN_SLP(gpm1-4, INPUT, NONE);
1202                 PIN_SLP(gpm1-5, INPUT, NONE);
1203                 PIN_SLP(gpm1-6, INPUT, DOWN);
1204
1205                 PIN_SLP(gpm2-0, INPUT, NONE);
1206                 PIN_SLP(gpm2-1, INPUT, NONE);
1207                 PIN_SLP(gpm2-2, INPUT, DOWN);
1208                 PIN_SLP(gpm2-3, INPUT, DOWN);
1209                 PIN_SLP(gpm2-4, INPUT, DOWN);
1210
1211                 PIN_SLP(gpm3-0, PREV, NONE);
1212                 PIN_SLP(gpm3-1, PREV, NONE);
1213                 PIN_SLP(gpm3-2, PREV, NONE);
1214                 PIN_SLP(gpm3-3, OUT1, NONE);
1215                 PIN_SLP(gpm3-4, INPUT, DOWN);
1216                 PIN_SLP(gpm3-5, INPUT, DOWN);
1217                 PIN_SLP(gpm3-6, INPUT, DOWN);
1218                 PIN_SLP(gpm3-7, INPUT, DOWN);
1219
1220                 PIN_SLP(gpm4-0, INPUT, DOWN);
1221                 PIN_SLP(gpm4-1, INPUT, DOWN);
1222                 PIN_SLP(gpm4-2, INPUT, DOWN);
1223                 PIN_SLP(gpm4-3, INPUT, DOWN);
1224                 PIN_SLP(gpm4-4, INPUT, DOWN);
1225                 PIN_SLP(gpm4-5, INPUT, DOWN);
1226                 PIN_SLP(gpm4-6, INPUT, DOWN);
1227                 PIN_SLP(gpm4-7, INPUT, DOWN);
1228
1229                 PIN_SLP(gpy0-0, INPUT, DOWN);
1230                 PIN_SLP(gpy0-1, INPUT, DOWN);
1231                 PIN_SLP(gpy0-2, INPUT, DOWN);
1232                 PIN_SLP(gpy0-3, INPUT, DOWN);
1233                 PIN_SLP(gpy0-4, INPUT, DOWN);
1234                 PIN_SLP(gpy0-5, INPUT, DOWN);
1235
1236                 PIN_SLP(gpy1-0, INPUT, DOWN);
1237                 PIN_SLP(gpy1-1, INPUT, DOWN);
1238                 PIN_SLP(gpy1-2, INPUT, DOWN);
1239                 PIN_SLP(gpy1-3, INPUT, DOWN);
1240
1241                 PIN_SLP(gpy2-0, PREV, NONE);
1242                 PIN_SLP(gpy2-1, INPUT, DOWN);
1243                 PIN_SLP(gpy2-2, INPUT, NONE);
1244                 PIN_SLP(gpy2-3, INPUT, NONE);
1245                 PIN_SLP(gpy2-4, INPUT, NONE);
1246                 PIN_SLP(gpy2-5, INPUT, NONE);
1247
1248                 PIN_SLP(gpy3-0, INPUT, DOWN);
1249                 PIN_SLP(gpy3-1, INPUT, DOWN);
1250                 PIN_SLP(gpy3-2, INPUT, DOWN);
1251                 PIN_SLP(gpy3-3, INPUT, DOWN);
1252                 PIN_SLP(gpy3-4, INPUT, DOWN);
1253                 PIN_SLP(gpy3-5, INPUT, DOWN);
1254                 PIN_SLP(gpy3-6, INPUT, DOWN);
1255                 PIN_SLP(gpy3-7, INPUT, DOWN);
1256
1257                 PIN_SLP(gpy4-0, INPUT, DOWN);
1258                 PIN_SLP(gpy4-1, INPUT, DOWN);
1259                 PIN_SLP(gpy4-2, INPUT, DOWN);
1260                 PIN_SLP(gpy4-3, INPUT, DOWN);
1261                 PIN_SLP(gpy4-4, INPUT, DOWN);
1262                 PIN_SLP(gpy4-5, INPUT, DOWN);
1263                 PIN_SLP(gpy4-6, INPUT, DOWN);
1264                 PIN_SLP(gpy4-7, INPUT, DOWN);
1265
1266                 PIN_SLP(gpy5-0, INPUT, DOWN);
1267                 PIN_SLP(gpy5-1, INPUT, DOWN);
1268                 PIN_SLP(gpy5-2, INPUT, DOWN);
1269                 PIN_SLP(gpy5-3, INPUT, DOWN);
1270                 PIN_SLP(gpy5-4, INPUT, DOWN);
1271                 PIN_SLP(gpy5-5, INPUT, DOWN);
1272                 PIN_SLP(gpy5-6, INPUT, DOWN);
1273                 PIN_SLP(gpy5-7, INPUT, DOWN);
1274
1275                 PIN_SLP(gpy6-0, INPUT, DOWN);
1276                 PIN_SLP(gpy6-1, INPUT, DOWN);
1277                 PIN_SLP(gpy6-2, INPUT, DOWN);
1278                 PIN_SLP(gpy6-3, INPUT, DOWN);
1279                 PIN_SLP(gpy6-4, INPUT, DOWN);
1280                 PIN_SLP(gpy6-5, INPUT, DOWN);
1281                 PIN_SLP(gpy6-6, INPUT, DOWN);
1282                 PIN_SLP(gpy6-7, INPUT, DOWN);
1283         };
1284 };
1285
1286 &pinctrl_2 {
1287         pinctrl-names = "default";
1288         pinctrl-0 = <&sleep2>;
1289
1290         sleep2: sleep-states {
1291                 PIN_SLP(gpz-0, INPUT, DOWN);
1292                 PIN_SLP(gpz-1, INPUT, DOWN);
1293                 PIN_SLP(gpz-2, INPUT, DOWN);
1294                 PIN_SLP(gpz-3, INPUT, DOWN);
1295                 PIN_SLP(gpz-4, INPUT, DOWN);
1296                 PIN_SLP(gpz-5, INPUT, DOWN);
1297                 PIN_SLP(gpz-6, INPUT, DOWN);
1298         };
1299 };
1300
1301 &pinctrl_3 {
1302         pinctrl-names = "default";
1303         pinctrl-0 = <&sleep3>;
1304
1305         sleep3: sleep-states {
1306                 PIN_SLP(gpv0-0, INPUT, DOWN);
1307                 PIN_SLP(gpv0-1, INPUT, DOWN);
1308                 PIN_SLP(gpv0-2, INPUT, DOWN);
1309                 PIN_SLP(gpv0-3, INPUT, DOWN);
1310                 PIN_SLP(gpv0-4, INPUT, DOWN);
1311                 PIN_SLP(gpv0-5, INPUT, DOWN);
1312                 PIN_SLP(gpv0-6, INPUT, DOWN);
1313                 PIN_SLP(gpv0-7, INPUT, DOWN);
1314
1315                 PIN_SLP(gpv1-0, INPUT, DOWN);
1316                 PIN_SLP(gpv1-1, INPUT, DOWN);
1317                 PIN_SLP(gpv1-2, INPUT, DOWN);
1318                 PIN_SLP(gpv1-3, INPUT, DOWN);
1319                 PIN_SLP(gpv1-4, INPUT, DOWN);
1320                 PIN_SLP(gpv1-5, INPUT, DOWN);
1321                 PIN_SLP(gpv1-6, INPUT, DOWN);
1322                 PIN_SLP(gpv1-7, INPUT, DOWN);
1323
1324                 PIN_SLP(gpv2-0, INPUT, DOWN);
1325                 PIN_SLP(gpv2-1, INPUT, DOWN);
1326                 PIN_SLP(gpv2-2, INPUT, DOWN);
1327                 PIN_SLP(gpv2-3, INPUT, DOWN);
1328                 PIN_SLP(gpv2-4, INPUT, DOWN);
1329                 PIN_SLP(gpv2-5, INPUT, DOWN);
1330                 PIN_SLP(gpv2-6, INPUT, DOWN);
1331                 PIN_SLP(gpv2-7, INPUT, DOWN);
1332
1333                 PIN_SLP(gpv3-0, INPUT, DOWN);
1334                 PIN_SLP(gpv3-1, INPUT, DOWN);
1335                 PIN_SLP(gpv3-2, INPUT, DOWN);
1336                 PIN_SLP(gpv3-3, INPUT, DOWN);
1337                 PIN_SLP(gpv3-4, INPUT, DOWN);
1338                 PIN_SLP(gpv3-5, INPUT, DOWN);
1339                 PIN_SLP(gpv3-6, INPUT, DOWN);
1340                 PIN_SLP(gpv3-7, INPUT, DOWN);
1341
1342                 PIN_SLP(gpv4-0, INPUT, DOWN);
1343         };
1344 };
1345
1346 &pwm {
1347         pinctrl-0 = <&pwm0_out>;
1348         pinctrl-names = "default";
1349         samsung,pwm-outputs = <0>;
1350         status = "okay";
1351 };
1352
1353 &rtc {
1354         status = "okay";
1355         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1356         clock-names = "rtc", "rtc_src";
1357 };
1358
1359 &sdhci_2 {
1360         bus-width = <4>;
1361         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1362         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1363         pinctrl-names = "default";
1364         vmmc-supply = <&ldo21_reg>;
1365         status = "okay";
1366 };
1367
1368 &sdhci_3 {
1369         #address-cells = <1>;
1370         #size-cells = <0>;
1371         non-removable;
1372         bus-width = <4>;
1373
1374         mmc-pwrseq = <&wlan_pwrseq>;
1375         pinctrl-names = "default";
1376         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1377         status = "okay";
1378
1379         brcmf: wifi@1 {
1380                 reg = <1>;
1381                 compatible = "brcm,bcm4329-fmac";
1382                 interrupt-parent = <&gpx2>;
1383                 interrupts = <5 IRQ_TYPE_NONE>;
1384                 interrupt-names = "host-wake";
1385         };
1386 };
1387
1388 &serial_0 {
1389         status = "okay";
1390 };
1391
1392 &serial_1 {
1393         status = "okay";
1394 };
1395
1396 &serial_2 {
1397         status = "okay";
1398 };
1399
1400 &serial_3 {
1401         status = "okay";
1402 };
1403
1404 &spi_1 {
1405         pinctrl-names = "default";
1406         pinctrl-0 = <&spi1_bus>;
1407         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1408         status = "okay";
1409
1410         s5c73m3_spi: s5c73m3@0 {
1411                 compatible = "samsung,s5c73m3";
1412                 spi-max-frequency = <50000000>;
1413                 reg = <0>;
1414                 controller-data {
1415                         samsung,spi-feedback-delay = <2>;
1416                 };
1417         };
1418 };
1419
1420 &tmu {
1421         vtmu-supply = <&ldo10_reg>;
1422         status = "okay";
1423 };