1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos4412 based Trats 2 board device tree source
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
8 * Device tree source file for Samsung's Trats 2 board which is based on
9 * Samsung's Exynos4412 SoC.
13 #include "exynos4412.dtsi"
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/interrupt-controller/irq.h>
17 #include <dt-bindings/clock/maxim,max77686.h>
18 #include <dt-bindings/pinctrl/samsung.h>
21 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
24 i2c11 = &i2c_max77693;
25 i2c12 = &i2c_max77693_fuel;
29 stdout-path = &serial_2;
33 compatible = "samsung,secure-firmware";
34 reg = <0x0204F000 0x1000>;
39 compatible = "samsung,clock-xxti", "fixed-clock";
40 clock-frequency = <0>;
44 compatible = "samsung,clock-xusbxti", "fixed-clock";
45 clock-frequency = <24000000>;
50 compatible = "simple-bus";
54 cam_io_reg: voltage-regulator-1 {
55 compatible = "regulator-fixed";
56 regulator-name = "CAM_SENSOR_A";
57 regulator-min-microvolt = <2800000>;
58 regulator-max-microvolt = <2800000>;
63 cam_af_reg: voltage-regulator-3 {
64 compatible = "regulator-fixed";
65 regulator-name = "CAM_AF";
66 regulator-min-microvolt = <2800000>;
67 regulator-max-microvolt = <2800000>;
72 vsil12: voltage-regulator-6 {
73 compatible = "regulator-fixed";
74 regulator-name = "VSIL_1.2V";
75 regulator-min-microvolt = <1200000>;
76 regulator-max-microvolt = <1200000>;
77 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
79 vin-supply = <&buck7_reg>;
82 vcc33mhl: voltage-regulator-7 {
83 compatible = "regulator-fixed";
84 regulator-name = "VCC_3.3_MHL";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
87 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
91 vcc18mhl: voltage-regulator-8 {
92 compatible = "regulator-fixed";
93 regulator-name = "VCC_1.8_MHL";
94 regulator-min-microvolt = <1800000>;
95 regulator-max-microvolt = <1800000>;
96 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
102 compatible = "gpio-keys";
105 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
107 label = "volume down";
108 debounce-interval = <10>;
112 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
115 debounce-interval = <10>;
119 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
122 debounce-interval = <10>;
127 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
130 debounce-interval = <10>;
135 i2c_max77693: i2c-gpio-1 {
136 compatible = "i2c-gpio";
137 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
138 i2c-gpio,delay-us = <2>;
139 #address-cells = <1>;
144 compatible = "maxim,max77693";
145 interrupt-parent = <&gpx1>;
146 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
150 esafeout1_reg: ESAFEOUT1 {
151 regulator-name = "ESAFEOUT1";
153 esafeout2_reg: ESAFEOUT2 {
154 regulator-name = "ESAFEOUT2";
156 charger_reg: CHARGER {
157 regulator-name = "CHARGER";
158 regulator-min-microamp = <60000>;
159 regulator-max-microamp = <2580000>;
164 compatible = "maxim,max77693-haptic";
165 haptic-supply = <&ldo26_reg>;
166 pwms = <&pwm 0 38022 0>;
170 compatible = "maxim,max77693-charger";
172 maxim,constant-microvolt = <4350000>;
173 maxim,min-system-microvolt = <3600000>;
174 maxim,thermal-regulation-celsius = <100>;
175 maxim,battery-overcurrent-microamp = <3500000>;
176 maxim,charge-input-threshold-microvolt = <4300000>;
181 i2c_max77693_fuel: i2c-gpio-3 {
182 compatible = "i2c-gpio";
183 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
184 i2c-gpio,delay-us = <2>;
185 #address-cells = <1>;
189 max77693-fuel-gauge@36 {
190 compatible = "maxim,max17047";
191 interrupt-parent = <&gpx2>;
192 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
195 maxim,over-heat-temp = <700>;
196 maxim,over-volt = <4500>;
201 compatible = "i2c-gpio";
202 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
203 i2c-gpio,delay-us = <100>;
204 #address-cells = <1>;
207 pinctrl-0 = <&i2c_mhl_bus>;
208 pinctrl-names = "default";
211 sii9234: hdmi-bridge@39 {
212 compatible = "sil,sii9234";
213 avcc33-supply = <&vcc33mhl>;
214 iovcc18-supply = <&vcc18mhl>;
215 avcc12-supply = <&vsil12>;
216 cvcc12-supply = <&vsil12>;
217 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
218 interrupt-parent = <&gpf3>;
219 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
223 mhl_to_hdmi: endpoint {
224 remote-endpoint = <&hdmi_to_mhl>;
230 wlan_pwrseq: sdhci3-pwrseq {
231 compatible = "mmc-pwrseq-simple";
232 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
233 clocks = <&max77686 MAX77686_CLK_PMIC>;
234 clock-names = "ext_clock";
238 compatible = "samsung,trats2-audio";
239 samsung,i2s-controller = <&i2s0>;
240 samsung,model = "Trats2";
241 samsung,audio-codec = <&wm1811>;
242 samsung,audio-routing =
250 compatible = "murata,ncp15wb473";
251 pullup-uv = <1800000>; /* VCC_1.8V_AP */
252 pullup-ohm = <100000>; /* 100K */
253 pulldown-ohm = <100000>; /* 100K */
254 io-channels = <&adc 1>; /* AP temperature */
258 compatible = "murata,ncp15wb473";
259 pullup-uv = <1800000>; /* VCC_1.8V_AP */
260 pullup-ohm = <100000>; /* 100K */
261 pulldown-ohm = <100000>; /* 100K */
262 io-channels = <&adc 2>; /* Battery temperature */
266 cpu_thermal: cpu-thermal {
269 /* Corresponds to 800MHz at freq_table */
270 cooling-device = <&cpu0 7 7>;
273 /* Corresponds to 200MHz at freq_table */
274 cooling-device = <&cpu0 13 13>;
282 vdd-supply = <&ldo3_reg>;
287 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
288 vdd-supply = <&buck1_reg>;
293 devfreq = <&bus_dmc>;
298 devfreq = <&bus_dmc>;
303 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
304 vdd-supply = <&buck3_reg>;
309 devfreq = <&bus_leftbus>;
314 devfreq = <&bus_leftbus>;
319 devfreq = <&bus_leftbus>;
324 devfreq = <&bus_leftbus>;
329 devfreq = <&bus_leftbus>;
334 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
335 pinctrl-names = "default";
337 assigned-clocks = <&clock CLK_MOUT_CAM0>,
338 <&clock CLK_MOUT_CAM1>;
339 assigned-clock-parents = <&clock CLK_XUSBXTI>,
340 <&clock CLK_XUSBXTI>;
344 cpu0-supply = <&buck2_reg>;
349 vddcore-supply = <&ldo8_reg>;
350 vddio-supply = <&ldo10_reg>;
351 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
352 <&clock CLK_SCLK_CSIS0>;
353 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
354 assigned-clock-rates = <0>, <176000000>;
356 /* Camera C (3) MIPI CSI-2 (CSIS0) */
360 remote-endpoint = <&s5c73m3_ep>;
361 data-lanes = <1 2 3 4>;
362 samsung,csis-hs-settle = <12>;
369 vddcore-supply = <&ldo8_reg>;
370 vddio-supply = <&ldo10_reg>;
371 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
372 <&clock CLK_SCLK_CSIS1>;
373 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
374 assigned-clock-rates = <0>, <176000000>;
376 /* Camera D (4) MIPI CSI-2 (CSIS1) */
380 remote-endpoint = <&is_s5k6a3_ep>;
382 samsung,csis-hs-settle = <18>;
389 vddcore-supply = <&ldo8_reg>;
390 vddio-supply = <&ldo10_reg>;
391 samsung,burst-clock-frequency = <500000000>;
392 samsung,esc-clock-frequency = <20000000>;
393 samsung,pll-clock-frequency = <24000000>;
397 vbus-supply = <&esafeout1_reg>;
403 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
404 <&clock CLK_SCLK_FIMC0>;
405 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
406 assigned-clock-rates = <0>, <176000000>;
411 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
412 <&clock CLK_SCLK_FIMC1>;
413 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
414 assigned-clock-rates = <0>, <176000000>;
419 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
420 <&clock CLK_SCLK_FIMC2>;
421 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
422 assigned-clock-rates = <0>, <176000000>;
427 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
428 <&clock CLK_SCLK_FIMC3>;
429 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
430 assigned-clock-rates = <0>, <176000000>;
434 pinctrl-0 = <&fimc_is_uart>;
435 pinctrl-names = "default";
453 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
454 pinctrl-names = "default";
455 pinctrl-0 = <&hdmi_hpd>;
456 vdd-supply = <&ldo3_reg>;
457 vdd_osc-supply = <&ldo4_reg>;
458 vdd_pll-supply = <&ldo3_reg>;
463 #address-cells = <1>;
468 hdmi_to_mhl: endpoint {
469 remote-endpoint = <&mhl_to_hdmi>;
476 vusb_d-supply = <&ldo15_reg>;
477 vusb_a-supply = <&ldo12_reg>;
478 dr_mode = "peripheral";
483 samsung,i2c-sda-delay = <100>;
484 samsung,i2c-slave-addr = <0x10>;
485 samsung,i2c-max-bus-freq = <400000>;
486 pinctrl-0 = <&i2c0_bus>;
487 pinctrl-names = "default";
490 s5c73m3: s5c73m3@3c {
491 compatible = "samsung,s5c73m3";
493 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
494 vdd-int-supply = <&buck9_reg>;
495 vddio-cis-supply = <&ldo9_reg>;
496 vddio-host-supply = <&ldo18_reg>;
497 vdd-af-supply = <&cam_af_reg>;
498 vdd-reg-supply = <&cam_io_reg>;
499 clock-frequency = <24000000>;
501 clocks = <&camera 0>;
502 clock-names = "cis_extclk";
505 s5c73m3_ep: endpoint {
506 remote-endpoint = <&csis0_ep>;
507 data-lanes = <1 2 3 4>;
514 pinctrl-0 = <&fimc_is_i2c1>;
515 pinctrl-names = "default";
518 compatible = "samsung,s5k6a3";
520 svdda-supply = <&cam_io_reg>;
521 svddio-supply = <&ldo19_reg>;
522 afvdd-supply = <&ldo19_reg>;
523 clock-frequency = <24000000>;
525 clocks = <&camera 1>;
526 clock-names = "extclk";
527 samsung,camclk-out = <1>;
528 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
531 is_s5k6a3_ep: endpoint {
532 remote-endpoint = <&csis1_ep>;
540 samsung,i2c-sda-delay = <100>;
541 samsung,i2c-slave-addr = <0x10>;
542 samsung,i2c-max-bus-freq = <400000>;
543 pinctrl-0 = <&i2c3_bus>;
544 pinctrl-names = "default";
549 samsung,i2c-sda-delay = <100>;
550 samsung,i2c-slave-addr = <0x10>;
551 samsung,i2c-max-bus-freq = <100000>;
552 pinctrl-0 = <&i2c4_bus>;
553 pinctrl-names = "default";
557 compatible = "wlf,wm1811";
559 clocks = <&pmu_system_controller 0>;
560 clock-names = "MCLK1";
561 DCVDD-supply = <&ldo3_reg>;
562 DBVDD1-supply = <&ldo3_reg>;
563 wlf,ldo1ena = <&gpj0 4 0>;
572 samsung,i2c-sda-delay = <100>;
573 samsung,i2c-slave-addr = <0x10>;
574 samsung,i2c-max-bus-freq = <100000>;
575 pinctrl-0 = <&i2c7_bus>;
576 pinctrl-names = "default";
579 max77686: max77686_pmic@9 {
580 compatible = "maxim,max77686";
581 interrupt-parent = <&gpx0>;
582 interrupts = <7 IRQ_TYPE_NONE>;
588 regulator-name = "VALIVE_1.0V_AP";
589 regulator-min-microvolt = <1000000>;
590 regulator-max-microvolt = <1000000>;
595 regulator-name = "VM1M2_1.2V_AP";
596 regulator-min-microvolt = <1200000>;
597 regulator-max-microvolt = <1200000>;
599 regulator-state-mem {
600 regulator-on-in-suspend;
605 regulator-name = "VCC_1.8V_AP";
606 regulator-min-microvolt = <1800000>;
607 regulator-max-microvolt = <1800000>;
612 regulator-name = "VCC_2.8V_AP";
613 regulator-min-microvolt = <2800000>;
614 regulator-max-microvolt = <2800000>;
619 regulator-name = "VCC_1.8V_IO";
620 regulator-min-microvolt = <1800000>;
621 regulator-max-microvolt = <1800000>;
626 regulator-name = "VMPLL_1.0V_AP";
627 regulator-min-microvolt = <1000000>;
628 regulator-max-microvolt = <1000000>;
630 regulator-state-mem {
631 regulator-on-in-suspend;
636 regulator-name = "VPLL_1.0V_AP";
637 regulator-min-microvolt = <1000000>;
638 regulator-max-microvolt = <1000000>;
640 regulator-state-mem {
641 regulator-on-in-suspend;
646 regulator-name = "VMIPI_1.0V";
647 regulator-min-microvolt = <1000000>;
648 regulator-max-microvolt = <1000000>;
649 regulator-state-mem {
650 regulator-off-in-suspend;
655 regulator-name = "CAM_ISP_MIPI_1.2V";
656 regulator-min-microvolt = <1200000>;
657 regulator-max-microvolt = <1200000>;
661 regulator-name = "VMIPI_1.8V";
662 regulator-min-microvolt = <1800000>;
663 regulator-max-microvolt = <1800000>;
664 regulator-state-mem {
665 regulator-off-in-suspend;
670 regulator-name = "VABB1_1.95V";
671 regulator-min-microvolt = <1950000>;
672 regulator-max-microvolt = <1950000>;
674 regulator-state-mem {
675 regulator-off-in-suspend;
680 regulator-name = "VUOTG_3.0V";
681 regulator-min-microvolt = <3000000>;
682 regulator-max-microvolt = <3000000>;
683 regulator-state-mem {
684 regulator-off-in-suspend;
689 regulator-name = "NFC_AVDD_1.8V";
690 regulator-min-microvolt = <1800000>;
691 regulator-max-microvolt = <1800000>;
695 regulator-name = "VABB2_1.95V";
696 regulator-min-microvolt = <1950000>;
697 regulator-max-microvolt = <1950000>;
699 regulator-state-mem {
700 regulator-off-in-suspend;
705 regulator-name = "VHSIC_1.0V";
706 regulator-min-microvolt = <1000000>;
707 regulator-max-microvolt = <1000000>;
708 regulator-state-mem {
709 regulator-on-in-suspend;
714 regulator-name = "VHSIC_1.8V";
715 regulator-min-microvolt = <1800000>;
716 regulator-max-microvolt = <1800000>;
717 regulator-state-mem {
718 regulator-on-in-suspend;
723 regulator-name = "CAM_SENSOR_CORE_1.2V";
724 regulator-min-microvolt = <1200000>;
725 regulator-max-microvolt = <1200000>;
729 regulator-name = "CAM_ISP_SEN_IO_1.8V";
730 regulator-min-microvolt = <1800000>;
731 regulator-max-microvolt = <1800000>;
735 regulator-name = "VT_CAM_1.8V";
736 regulator-min-microvolt = <1800000>;
737 regulator-max-microvolt = <1800000>;
741 regulator-name = "VDDQ_PRE_1.8V";
742 regulator-min-microvolt = <1800000>;
743 regulator-max-microvolt = <1800000>;
747 regulator-name = "VTF_2.8V";
748 regulator-min-microvolt = <2800000>;
749 regulator-max-microvolt = <2800000>;
750 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
754 regulator-name = "VMEM_VDD_2.8V";
755 regulator-min-microvolt = <2800000>;
756 regulator-max-microvolt = <2800000>;
757 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
761 regulator-name = "TSP_AVDD_3.3V";
762 regulator-min-microvolt = <3300000>;
763 regulator-max-microvolt = <3300000>;
767 regulator-name = "TSP_VDD_1.8V";
768 regulator-min-microvolt = <1800000>;
769 regulator-max-microvolt = <1800000>;
773 regulator-name = "LDO25";
777 regulator-name = "MOTOR_VCC_3.0V";
778 regulator-min-microvolt = <3000000>;
779 regulator-max-microvolt = <3000000>;
783 regulator-name = "vdd_mif";
784 regulator-min-microvolt = <850000>;
785 regulator-max-microvolt = <1100000>;
788 regulator-state-mem {
789 regulator-off-in-suspend;
794 regulator-name = "vdd_arm";
795 regulator-min-microvolt = <850000>;
796 regulator-max-microvolt = <1500000>;
799 regulator-state-mem {
800 regulator-on-in-suspend;
805 regulator-name = "vdd_int";
806 regulator-min-microvolt = <850000>;
807 regulator-max-microvolt = <1150000>;
810 regulator-state-mem {
811 regulator-off-in-suspend;
816 regulator-name = "vdd_g3d";
817 regulator-min-microvolt = <850000>;
818 regulator-max-microvolt = <1150000>;
820 regulator-state-mem {
821 regulator-off-in-suspend;
826 regulator-name = "VMEM_1.2V_AP";
827 regulator-min-microvolt = <1200000>;
828 regulator-max-microvolt = <1200000>;
833 regulator-name = "VCC_SUB_1.35V";
834 regulator-min-microvolt = <1350000>;
835 regulator-max-microvolt = <1350000>;
840 regulator-name = "VCC_SUB_2.0V";
841 regulator-min-microvolt = <2000000>;
842 regulator-max-microvolt = <2000000>;
847 regulator-name = "VMEM_VDDF_3.0V";
848 regulator-min-microvolt = <2850000>;
849 regulator-max-microvolt = <2850000>;
850 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
854 regulator-name = "CAM_ISP_CORE_1.2V";
855 regulator-min-microvolt = <1000000>;
856 regulator-max-microvolt = <1200000>;
867 pinctrl-0 = <&i2s0_bus>;
868 pinctrl-names = "default";
879 card-detect-delay = <200>;
880 vmmc-supply = <&ldo22_reg>;
881 clock-frequency = <400000000>;
882 samsung,dw-mshc-ciu-div = <0>;
883 samsung,dw-mshc-sdr-timing = <2 3>;
884 samsung,dw-mshc-ddr-timing = <1 2>;
885 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
886 pinctrl-names = "default";
892 &pmu_system_controller {
893 assigned-clocks = <&pmu_system_controller 0>;
894 assigned-clock-parents = <&clock CLK_XUSBXTI>;
898 pinctrl-names = "default";
899 pinctrl-0 = <&sleep0>;
902 samsung,pins = "gpf3-5";
903 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
906 i2c_mhl_bus: i2c-mhl-bus {
907 samsung,pins = "gpf0-4", "gpf0-6";
908 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
909 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
910 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
913 sleep0: sleep-states {
914 PIN_SLP(gpa0-0, INPUT, NONE);
915 PIN_SLP(gpa0-1, OUT0, NONE);
916 PIN_SLP(gpa0-2, INPUT, NONE);
917 PIN_SLP(gpa0-3, INPUT, UP);
918 PIN_SLP(gpa0-4, INPUT, NONE);
919 PIN_SLP(gpa0-5, INPUT, DOWN);
920 PIN_SLP(gpa0-6, INPUT, DOWN);
921 PIN_SLP(gpa0-7, INPUT, UP);
923 PIN_SLP(gpa1-0, INPUT, DOWN);
924 PIN_SLP(gpa1-1, INPUT, DOWN);
925 PIN_SLP(gpa1-2, INPUT, DOWN);
926 PIN_SLP(gpa1-3, INPUT, DOWN);
927 PIN_SLP(gpa1-4, INPUT, DOWN);
928 PIN_SLP(gpa1-5, INPUT, DOWN);
930 PIN_SLP(gpb-0, INPUT, NONE);
931 PIN_SLP(gpb-1, INPUT, NONE);
932 PIN_SLP(gpb-2, INPUT, NONE);
933 PIN_SLP(gpb-3, INPUT, NONE);
934 PIN_SLP(gpb-4, INPUT, DOWN);
935 PIN_SLP(gpb-5, INPUT, UP);
936 PIN_SLP(gpb-6, INPUT, DOWN);
937 PIN_SLP(gpb-7, INPUT, DOWN);
939 PIN_SLP(gpc0-0, INPUT, DOWN);
940 PIN_SLP(gpc0-1, INPUT, DOWN);
941 PIN_SLP(gpc0-2, INPUT, DOWN);
942 PIN_SLP(gpc0-3, INPUT, DOWN);
943 PIN_SLP(gpc0-4, INPUT, DOWN);
945 PIN_SLP(gpc1-0, INPUT, NONE);
946 PIN_SLP(gpc1-1, PREV, NONE);
947 PIN_SLP(gpc1-2, INPUT, NONE);
948 PIN_SLP(gpc1-3, INPUT, NONE);
949 PIN_SLP(gpc1-4, INPUT, NONE);
951 PIN_SLP(gpd0-0, INPUT, DOWN);
952 PIN_SLP(gpd0-1, INPUT, DOWN);
953 PIN_SLP(gpd0-2, INPUT, NONE);
954 PIN_SLP(gpd0-3, INPUT, NONE);
956 PIN_SLP(gpd1-0, INPUT, DOWN);
957 PIN_SLP(gpd1-1, INPUT, DOWN);
958 PIN_SLP(gpd1-2, INPUT, NONE);
959 PIN_SLP(gpd1-3, INPUT, NONE);
961 PIN_SLP(gpf0-0, INPUT, NONE);
962 PIN_SLP(gpf0-1, INPUT, NONE);
963 PIN_SLP(gpf0-2, INPUT, DOWN);
964 PIN_SLP(gpf0-3, INPUT, DOWN);
965 PIN_SLP(gpf0-4, INPUT, NONE);
966 PIN_SLP(gpf0-5, INPUT, DOWN);
967 PIN_SLP(gpf0-6, INPUT, NONE);
968 PIN_SLP(gpf0-7, INPUT, DOWN);
970 PIN_SLP(gpf1-0, INPUT, DOWN);
971 PIN_SLP(gpf1-1, INPUT, DOWN);
972 PIN_SLP(gpf1-2, INPUT, DOWN);
973 PIN_SLP(gpf1-3, INPUT, DOWN);
974 PIN_SLP(gpf1-4, INPUT, NONE);
975 PIN_SLP(gpf1-5, INPUT, NONE);
976 PIN_SLP(gpf1-6, INPUT, DOWN);
977 PIN_SLP(gpf1-7, PREV, NONE);
979 PIN_SLP(gpf2-0, PREV, NONE);
980 PIN_SLP(gpf2-1, INPUT, DOWN);
981 PIN_SLP(gpf2-2, INPUT, DOWN);
982 PIN_SLP(gpf2-3, INPUT, DOWN);
983 PIN_SLP(gpf2-4, INPUT, DOWN);
984 PIN_SLP(gpf2-5, INPUT, DOWN);
985 PIN_SLP(gpf2-6, INPUT, NONE);
986 PIN_SLP(gpf2-7, INPUT, NONE);
988 PIN_SLP(gpf3-0, INPUT, NONE);
989 PIN_SLP(gpf3-1, PREV, NONE);
990 PIN_SLP(gpf3-2, PREV, NONE);
991 PIN_SLP(gpf3-3, PREV, NONE);
992 PIN_SLP(gpf3-4, OUT1, NONE);
993 PIN_SLP(gpf3-5, INPUT, DOWN);
995 PIN_SLP(gpj0-0, PREV, NONE);
996 PIN_SLP(gpj0-1, PREV, NONE);
997 PIN_SLP(gpj0-2, PREV, NONE);
998 PIN_SLP(gpj0-3, INPUT, DOWN);
999 PIN_SLP(gpj0-4, PREV, NONE);
1000 PIN_SLP(gpj0-5, PREV, NONE);
1001 PIN_SLP(gpj0-6, INPUT, DOWN);
1002 PIN_SLP(gpj0-7, INPUT, DOWN);
1004 PIN_SLP(gpj1-0, INPUT, DOWN);
1005 PIN_SLP(gpj1-1, PREV, NONE);
1006 PIN_SLP(gpj1-2, PREV, NONE);
1007 PIN_SLP(gpj1-3, INPUT, DOWN);
1008 PIN_SLP(gpj1-4, INPUT, DOWN);
1013 pinctrl-names = "default";
1014 pinctrl-0 = <&sleep1>;
1016 hdmi_hpd: hdmi-hpd {
1017 samsung,pins = "gpx3-7";
1018 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1021 sleep1: sleep-states {
1022 PIN_SLP(gpk0-0, PREV, NONE);
1023 PIN_SLP(gpk0-1, PREV, NONE);
1024 PIN_SLP(gpk0-2, OUT0, NONE);
1025 PIN_SLP(gpk0-3, PREV, NONE);
1026 PIN_SLP(gpk0-4, PREV, NONE);
1027 PIN_SLP(gpk0-5, PREV, NONE);
1028 PIN_SLP(gpk0-6, PREV, NONE);
1030 PIN_SLP(gpk1-0, INPUT, DOWN);
1031 PIN_SLP(gpk1-1, INPUT, DOWN);
1032 PIN_SLP(gpk1-2, INPUT, DOWN);
1033 PIN_SLP(gpk1-3, PREV, NONE);
1034 PIN_SLP(gpk1-4, PREV, NONE);
1035 PIN_SLP(gpk1-5, PREV, NONE);
1036 PIN_SLP(gpk1-6, PREV, NONE);
1038 PIN_SLP(gpk2-0, INPUT, DOWN);
1039 PIN_SLP(gpk2-1, INPUT, DOWN);
1040 PIN_SLP(gpk2-2, INPUT, DOWN);
1041 PIN_SLP(gpk2-3, INPUT, DOWN);
1042 PIN_SLP(gpk2-4, INPUT, DOWN);
1043 PIN_SLP(gpk2-5, INPUT, DOWN);
1044 PIN_SLP(gpk2-6, INPUT, DOWN);
1046 PIN_SLP(gpk3-0, OUT0, NONE);
1047 PIN_SLP(gpk3-1, INPUT, NONE);
1048 PIN_SLP(gpk3-2, INPUT, DOWN);
1049 PIN_SLP(gpk3-3, INPUT, NONE);
1050 PIN_SLP(gpk3-4, INPUT, NONE);
1051 PIN_SLP(gpk3-5, INPUT, NONE);
1052 PIN_SLP(gpk3-6, INPUT, NONE);
1054 PIN_SLP(gpl0-0, INPUT, DOWN);
1055 PIN_SLP(gpl0-1, INPUT, DOWN);
1056 PIN_SLP(gpl0-2, INPUT, DOWN);
1057 PIN_SLP(gpl0-3, INPUT, DOWN);
1058 PIN_SLP(gpl0-4, PREV, NONE);
1059 PIN_SLP(gpl0-6, PREV, NONE);
1061 PIN_SLP(gpl1-0, INPUT, DOWN);
1062 PIN_SLP(gpl1-1, INPUT, DOWN);
1063 PIN_SLP(gpl2-0, INPUT, DOWN);
1064 PIN_SLP(gpl2-1, INPUT, DOWN);
1065 PIN_SLP(gpl2-2, INPUT, DOWN);
1066 PIN_SLP(gpl2-3, INPUT, DOWN);
1067 PIN_SLP(gpl2-4, INPUT, DOWN);
1068 PIN_SLP(gpl2-5, INPUT, DOWN);
1069 PIN_SLP(gpl2-6, PREV, NONE);
1070 PIN_SLP(gpl2-7, INPUT, DOWN);
1072 PIN_SLP(gpm0-0, INPUT, DOWN);
1073 PIN_SLP(gpm0-1, INPUT, DOWN);
1074 PIN_SLP(gpm0-2, INPUT, DOWN);
1075 PIN_SLP(gpm0-3, INPUT, DOWN);
1076 PIN_SLP(gpm0-4, INPUT, DOWN);
1077 PIN_SLP(gpm0-5, INPUT, DOWN);
1078 PIN_SLP(gpm0-6, INPUT, DOWN);
1079 PIN_SLP(gpm0-7, INPUT, DOWN);
1081 PIN_SLP(gpm1-0, INPUT, DOWN);
1082 PIN_SLP(gpm1-1, INPUT, DOWN);
1083 PIN_SLP(gpm1-2, INPUT, NONE);
1084 PIN_SLP(gpm1-3, INPUT, NONE);
1085 PIN_SLP(gpm1-4, INPUT, NONE);
1086 PIN_SLP(gpm1-5, INPUT, NONE);
1087 PIN_SLP(gpm1-6, INPUT, DOWN);
1089 PIN_SLP(gpm2-0, INPUT, NONE);
1090 PIN_SLP(gpm2-1, INPUT, NONE);
1091 PIN_SLP(gpm2-2, INPUT, DOWN);
1092 PIN_SLP(gpm2-3, INPUT, DOWN);
1093 PIN_SLP(gpm2-4, INPUT, DOWN);
1095 PIN_SLP(gpm3-0, PREV, NONE);
1096 PIN_SLP(gpm3-1, PREV, NONE);
1097 PIN_SLP(gpm3-2, PREV, NONE);
1098 PIN_SLP(gpm3-3, OUT1, NONE);
1099 PIN_SLP(gpm3-4, INPUT, DOWN);
1100 PIN_SLP(gpm3-5, INPUT, DOWN);
1101 PIN_SLP(gpm3-6, INPUT, DOWN);
1102 PIN_SLP(gpm3-7, INPUT, DOWN);
1104 PIN_SLP(gpm4-0, INPUT, DOWN);
1105 PIN_SLP(gpm4-1, INPUT, DOWN);
1106 PIN_SLP(gpm4-2, INPUT, DOWN);
1107 PIN_SLP(gpm4-3, INPUT, DOWN);
1108 PIN_SLP(gpm4-4, INPUT, DOWN);
1109 PIN_SLP(gpm4-5, INPUT, DOWN);
1110 PIN_SLP(gpm4-6, INPUT, DOWN);
1111 PIN_SLP(gpm4-7, INPUT, DOWN);
1113 PIN_SLP(gpy0-0, INPUT, DOWN);
1114 PIN_SLP(gpy0-1, INPUT, DOWN);
1115 PIN_SLP(gpy0-2, INPUT, DOWN);
1116 PIN_SLP(gpy0-3, INPUT, DOWN);
1117 PIN_SLP(gpy0-4, INPUT, DOWN);
1118 PIN_SLP(gpy0-5, INPUT, DOWN);
1120 PIN_SLP(gpy1-0, INPUT, DOWN);
1121 PIN_SLP(gpy1-1, INPUT, DOWN);
1122 PIN_SLP(gpy1-2, INPUT, DOWN);
1123 PIN_SLP(gpy1-3, INPUT, DOWN);
1125 PIN_SLP(gpy2-0, PREV, NONE);
1126 PIN_SLP(gpy2-1, INPUT, DOWN);
1127 PIN_SLP(gpy2-2, INPUT, NONE);
1128 PIN_SLP(gpy2-3, INPUT, NONE);
1129 PIN_SLP(gpy2-4, INPUT, NONE);
1130 PIN_SLP(gpy2-5, INPUT, NONE);
1132 PIN_SLP(gpy3-0, INPUT, DOWN);
1133 PIN_SLP(gpy3-1, INPUT, DOWN);
1134 PIN_SLP(gpy3-2, INPUT, DOWN);
1135 PIN_SLP(gpy3-3, INPUT, DOWN);
1136 PIN_SLP(gpy3-4, INPUT, DOWN);
1137 PIN_SLP(gpy3-5, INPUT, DOWN);
1138 PIN_SLP(gpy3-6, INPUT, DOWN);
1139 PIN_SLP(gpy3-7, INPUT, DOWN);
1141 PIN_SLP(gpy4-0, INPUT, DOWN);
1142 PIN_SLP(gpy4-1, INPUT, DOWN);
1143 PIN_SLP(gpy4-2, INPUT, DOWN);
1144 PIN_SLP(gpy4-3, INPUT, DOWN);
1145 PIN_SLP(gpy4-4, INPUT, DOWN);
1146 PIN_SLP(gpy4-5, INPUT, DOWN);
1147 PIN_SLP(gpy4-6, INPUT, DOWN);
1148 PIN_SLP(gpy4-7, INPUT, DOWN);
1150 PIN_SLP(gpy5-0, INPUT, DOWN);
1151 PIN_SLP(gpy5-1, INPUT, DOWN);
1152 PIN_SLP(gpy5-2, INPUT, DOWN);
1153 PIN_SLP(gpy5-3, INPUT, DOWN);
1154 PIN_SLP(gpy5-4, INPUT, DOWN);
1155 PIN_SLP(gpy5-5, INPUT, DOWN);
1156 PIN_SLP(gpy5-6, INPUT, DOWN);
1157 PIN_SLP(gpy5-7, INPUT, DOWN);
1159 PIN_SLP(gpy6-0, INPUT, DOWN);
1160 PIN_SLP(gpy6-1, INPUT, DOWN);
1161 PIN_SLP(gpy6-2, INPUT, DOWN);
1162 PIN_SLP(gpy6-3, INPUT, DOWN);
1163 PIN_SLP(gpy6-4, INPUT, DOWN);
1164 PIN_SLP(gpy6-5, INPUT, DOWN);
1165 PIN_SLP(gpy6-6, INPUT, DOWN);
1166 PIN_SLP(gpy6-7, INPUT, DOWN);
1171 pinctrl-names = "default";
1172 pinctrl-0 = <&sleep2>;
1174 sleep2: sleep-states {
1175 PIN_SLP(gpz-0, INPUT, DOWN);
1176 PIN_SLP(gpz-1, INPUT, DOWN);
1177 PIN_SLP(gpz-2, INPUT, DOWN);
1178 PIN_SLP(gpz-3, INPUT, DOWN);
1179 PIN_SLP(gpz-4, INPUT, DOWN);
1180 PIN_SLP(gpz-5, INPUT, DOWN);
1181 PIN_SLP(gpz-6, INPUT, DOWN);
1186 pinctrl-names = "default";
1187 pinctrl-0 = <&sleep3>;
1189 sleep3: sleep-states {
1190 PIN_SLP(gpv0-0, INPUT, DOWN);
1191 PIN_SLP(gpv0-1, INPUT, DOWN);
1192 PIN_SLP(gpv0-2, INPUT, DOWN);
1193 PIN_SLP(gpv0-3, INPUT, DOWN);
1194 PIN_SLP(gpv0-4, INPUT, DOWN);
1195 PIN_SLP(gpv0-5, INPUT, DOWN);
1196 PIN_SLP(gpv0-6, INPUT, DOWN);
1197 PIN_SLP(gpv0-7, INPUT, DOWN);
1199 PIN_SLP(gpv1-0, INPUT, DOWN);
1200 PIN_SLP(gpv1-1, INPUT, DOWN);
1201 PIN_SLP(gpv1-2, INPUT, DOWN);
1202 PIN_SLP(gpv1-3, INPUT, DOWN);
1203 PIN_SLP(gpv1-4, INPUT, DOWN);
1204 PIN_SLP(gpv1-5, INPUT, DOWN);
1205 PIN_SLP(gpv1-6, INPUT, DOWN);
1206 PIN_SLP(gpv1-7, INPUT, DOWN);
1208 PIN_SLP(gpv2-0, INPUT, DOWN);
1209 PIN_SLP(gpv2-1, INPUT, DOWN);
1210 PIN_SLP(gpv2-2, INPUT, DOWN);
1211 PIN_SLP(gpv2-3, INPUT, DOWN);
1212 PIN_SLP(gpv2-4, INPUT, DOWN);
1213 PIN_SLP(gpv2-5, INPUT, DOWN);
1214 PIN_SLP(gpv2-6, INPUT, DOWN);
1215 PIN_SLP(gpv2-7, INPUT, DOWN);
1217 PIN_SLP(gpv3-0, INPUT, DOWN);
1218 PIN_SLP(gpv3-1, INPUT, DOWN);
1219 PIN_SLP(gpv3-2, INPUT, DOWN);
1220 PIN_SLP(gpv3-3, INPUT, DOWN);
1221 PIN_SLP(gpv3-4, INPUT, DOWN);
1222 PIN_SLP(gpv3-5, INPUT, DOWN);
1223 PIN_SLP(gpv3-6, INPUT, DOWN);
1224 PIN_SLP(gpv3-7, INPUT, DOWN);
1226 PIN_SLP(gpv4-0, INPUT, DOWN);
1231 pinctrl-0 = <&pwm0_out>;
1232 pinctrl-names = "default";
1233 samsung,pwm-outputs = <0>;
1239 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1240 clock-names = "rtc", "rtc_src";
1245 cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1247 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
1248 pinctrl-names = "default";
1249 vmmc-supply = <&ldo21_reg>;
1254 #address-cells = <1>;
1259 mmc-pwrseq = <&wlan_pwrseq>;
1260 pinctrl-names = "default";
1261 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1266 compatible = "brcm,bcm4329-fmac";
1267 interrupt-parent = <&gpx2>;
1268 interrupts = <5 IRQ_TYPE_NONE>;
1269 interrupt-names = "host-wake";
1290 pinctrl-names = "default";
1291 pinctrl-0 = <&spi1_bus>;
1292 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1295 s5c73m3_spi: s5c73m3@0 {
1296 compatible = "samsung,s5c73m3";
1297 spi-max-frequency = <50000000>;
1300 samsung,spi-feedback-delay = <2>;
1306 vtmu-supply = <&ldo10_reg>;