2 * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
4 * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6 * Licensed under GPLv2.
9 #include "at91sam9260.dtsi"
11 model = "Calao QIL A9260";
12 compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
15 bootargs = "console=ttyS0,115200";
19 reg = <0x20000000 0x4000000>;
24 clock-frequency = <32768>;
28 clock-frequency = <12000000>;
34 usb1: gadget@fffa4000 {
35 atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
42 &pinctrl_mmc0_slot0_cmd_dat0
43 &pinctrl_mmc0_slot0_dat1_3>;
51 usart0: serial@fffb0000 {
56 &pinctrl_usart0_dtr_dsr
62 usart1: serial@fffb4000 {
70 usart2: serial@fffb8000 {
78 macb0: ethernet@fffc4000 {
85 cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
88 compatible = "st,m41t94";
90 spi-max-frequency = <1000000>;
95 dbgu: serial@fffff200 {
100 atmel,wakeup-counter = <10>;
101 atmel,wakeup-rtt-timer;
110 nand0: nand@40000000 {
111 nand-bus-width = <8>;
112 nand-ecc-mode = "soft";
117 label = "at91bootstrap";
123 reg = <0x20000 0x40000>;
127 label = "bareboxenv";
128 reg = <0x60000 0x20000>;
132 label = "bareboxenv2";
133 reg = <0x80000 0x20000>;
138 reg = <0xa0000 0x20000>;
143 reg = <0xc0000 0x400000>;
148 reg = <0x4c0000 0x7800000>;
153 reg = <0x7cc0000 0x8340000>;
159 compatible = "gpio-leds";
163 gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
164 linux,default-trigger = "heartbeat";
169 compatible = "gpio-keys";
170 #address-cells = <1>;
175 gpios = <&pioB 10 GPIO_ACTIVE_LOW>;