arch/arm/boot/dts/aspeed-g6.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 // Copyright 2019 IBM Corp.
   3
   4 #include <dt-bindings/interrupt-controller/arm-gic.h>
   5 #include <dt-bindings/clock/ast2600-clock.h>
   6
   7 / {
   8         model = "Aspeed BMC";
   9         compatible = "aspeed,ast2600";
  10         #address-cells = <1>;
  11         #size-cells = <1>;
  12         interrupt-parent = <&gic>;
  13
  14         aliases {
  15                 i2c0 = &i2c0;
  16                 i2c1 = &i2c1;
  17                 i2c2 = &i2c2;
  18                 i2c3 = &i2c3;
  19                 i2c4 = &i2c4;
  20                 i2c5 = &i2c5;
  21                 i2c6 = &i2c6;
  22                 i2c7 = &i2c7;
  23                 i2c8 = &i2c8;
  24                 i2c9 = &i2c9;
  25                 i2c10 = &i2c10;
  26                 i2c11 = &i2c11;
  27                 i2c12 = &i2c12;
  28                 i2c13 = &i2c13;
  29                 i2c14 = &i2c14;
  30                 i2c15 = &i2c15;
  31                 serial0 = &uart1;
  32                 serial1 = &uart2;
  33                 serial2 = &uart3;
  34                 serial3 = &uart4;
  35                 serial4 = &uart5;
  36                 serial5 = &vuart1;
  37                 serial6 = &vuart2;
  38         };
  39
  40
  41         cpus {
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44                 enable-method = "aspeed,ast2600-smp";
  45
  46                 cpu@f00 {
  47                         compatible = "arm,cortex-a7";
  48                         device_type = "cpu";
  49                         reg = <0xf00>;
  50                 };
  51
  52                 cpu@f01 {
  53                         compatible = "arm,cortex-a7";
  54                         device_type = "cpu";
  55                         reg = <0xf01>;
  56                 };
  57         };
  58
  59         timer {
  60                 compatible = "arm,armv7-timer";
  61                 interrupt-parent = <&gic>;
  62                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  63                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  64                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  65                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  66                 clocks = <&syscon ASPEED_CLK_HPLL>;
  67                 arm,cpu-registers-not-fw-configured;
  68         };
  69
  70         ahb {
  71                 compatible = "simple-bus";
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 device_type = "soc";
  75                 ranges;
  76
  77                 gic: interrupt-controller@40461000 {
  78                         compatible = "arm,cortex-a7-gic";
  79                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  80                         #interrupt-cells = <3>;
  81                         interrupt-controller;
  82                         interrupt-parent = <&gic>;
  83                         reg = <0x40461000 0x1000>,
  84                             <0x40462000 0x1000>,
  85                             <0x40464000 0x2000>,
  86                             <0x40466000 0x2000>;
  87                         };
  88
  89                 fmc: spi@1e620000 {
  90                         reg = < 0x1e620000 0xc4
  91                                 0x20000000 0x10000000 >;
  92                         #address-cells = <1>;
  93                         #size-cells = <0>;
  94                         compatible = "aspeed,ast2600-fmc";
  95                         clocks = <&syscon ASPEED_CLK_AHB>;
  96                         status = "disabled";
  97                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
  98                         flash@0 {
  99                                 reg = < 0 >;
 100                                 compatible = "jedec,spi-nor";
 101                                 spi-max-frequency = <50000000>;
 102                                 status = "disabled";
 103                         };
 104                         flash@1 {
 105                                 reg = < 1 >;
 106                                 compatible = "jedec,spi-nor";
 107                                 spi-max-frequency = <50000000>;
 108                                 status = "disabled";
 109                         };
 110                         flash@2 {
 111                                 reg = < 2 >;
 112                                 compatible = "jedec,spi-nor";
 113                                 spi-max-frequency = <50000000>;
 114                                 status = "disabled";
 115                         };
 116                 };
 117
 118                 spi1: spi@1e630000 {
 119                         reg = < 0x1e630000 0xc4
 120                                 0x30000000 0x10000000 >;
 121                         #address-cells = <1>;
 122                         #size-cells = <0>;
 123                         compatible = "aspeed,ast2600-spi";
 124                         clocks = <&syscon ASPEED_CLK_AHB>;
 125                         status = "disabled";
 126                         flash@0 {
 127                                 reg = < 0 >;
 128                                 compatible = "jedec,spi-nor";
 129                                 spi-max-frequency = <50000000>;
 130                                 status = "disabled";
 131                         };
 132                         flash@1 {
 133                                 reg = < 1 >;
 134                                 compatible = "jedec,spi-nor";
 135                                 spi-max-frequency = <50000000>;
 136                                 status = "disabled";
 137                         };
 138                 };
 139
 140                 spi2: spi@1e631000 {
 141                         reg = < 0x1e631000 0xc4
 142                                 0x50000000 0x10000000 >;
 143                         #address-cells = <1>;
 144                         #size-cells = <0>;
 145                         compatible = "aspeed,ast2600-spi";
 146                         clocks = <&syscon ASPEED_CLK_AHB>;
 147                         status = "disabled";
 148                         flash@0 {
 149                                 reg = < 0 >;
 150                                 compatible = "jedec,spi-nor";
 151                                 spi-max-frequency = <50000000>;
 152                                 status = "disabled";
 153                         };
 154                         flash@1 {
 155                                 reg = < 1 >;
 156                                 compatible = "jedec,spi-nor";
 157                                 spi-max-frequency = <50000000>;
 158                                 status = "disabled";
 159                         };
 160                         flash@2 {
 161                                 reg = < 2 >;
 162                                 compatible = "jedec,spi-nor";
 163                                 spi-max-frequency = <50000000>;
 164                                 status = "disabled";
 165                         };
 166                 };
 167
 168                 mdio0: mdio@1e650000 {
 169                         compatible = "aspeed,ast2600-mdio";
 170                         reg = <0x1e650000 0x8>;
 171                         #address-cells = <1>;
 172                         #size-cells = <0>;
 173                         status = "disabled";
 174                         pinctrl-names = "default";
 175                         pinctrl-0 = <&pinctrl_mdio1_default>;
 176                 };
 177
 178                 mdio1: mdio@1e650008 {
 179                         compatible = "aspeed,ast2600-mdio";
 180                         reg = <0x1e650008 0x8>;
 181                         #address-cells = <1>;
 182                         #size-cells = <0>;
 183                         status = "disabled";
 184                         pinctrl-names = "default";
 185                         pinctrl-0 = <&pinctrl_mdio2_default>;
 186                 };
 187
 188                 mdio2: mdio@1e650010 {
 189                         compatible = "aspeed,ast2600-mdio";
 190                         reg = <0x1e650010 0x8>;
 191                         #address-cells = <1>;
 192                         #size-cells = <0>;
 193                         status = "disabled";
 194                         pinctrl-names = "default";
 195                         pinctrl-0 = <&pinctrl_mdio3_default>;
 196                 };
 197
 198                 mdio3: mdio@1e650018 {
 199                         compatible = "aspeed,ast2600-mdio";
 200                         reg = <0x1e650018 0x8>;
 201                         #address-cells = <1>;
 202                         #size-cells = <0>;
 203                         status = "disabled";
 204                         pinctrl-names = "default";
 205                         pinctrl-0 = <&pinctrl_mdio4_default>;
 206                 };
 207
 208                 mac0: ftgmac@1e660000 {
 209                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 210                         reg = <0x1e660000 0x180>;
 211                         #address-cells = <1>;
 212                         #size-cells = <0>;
 213                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 214                         clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
 215                         status = "disabled";
 216                 };
 217
 218                 mac1: ftgmac@1e680000 {
 219                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 220                         reg = <0x1e680000 0x180>;
 221                         #address-cells = <1>;
 222                         #size-cells = <0>;
 223                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 224                         clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
 225                         status = "disabled";
 226                 };
 227
 228                 mac2: ftgmac@1e670000 {
 229                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 230                         reg = <0x1e670000 0x180>;
 231                         #address-cells = <1>;
 232                         #size-cells = <0>;
 233                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 234                         clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
 235                         status = "disabled";
 236                 };
 237
 238                 mac3: ftgmac@1e690000 {
 239                         compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 240                         reg = <0x1e690000 0x180>;
 241                         #address-cells = <1>;
 242                         #size-cells = <0>;
 243                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 244                         clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
 245                         status = "disabled";
 246                 };
 247
 248                 ehci0: usb@1e6a1000 {
 249                         compatible = "aspeed,ast2600-ehci", "generic-ehci";
 250                         reg = <0x1e6a1000 0x100>;
 251                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 252                         clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
 253                         pinctrl-names = "default";
 254                         pinctrl-0 = <&pinctrl_usb2ah_default>;
 255                         status = "disabled";
 256                 };
 257
 258                 ehci1: usb@1e6a3000 {
 259                         compatible = "aspeed,ast2600-ehci", "generic-ehci";
 260                         reg = <0x1e6a3000 0x100>;
 261                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 262                         clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
 263                         pinctrl-names = "default";
 264                         pinctrl-0 = <&pinctrl_usb2bh_default>;
 265                         status = "disabled";
 266                 };
 267
 268                 uhci: usb@1e6b0000 {
 269                         compatible = "aspeed,ast2600-uhci", "generic-uhci";
 270                         reg = <0x1e6b0000 0x100>;
 271                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 272                         #ports = <2>;
 273                         clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
 274                         status = "disabled";
 275                         /*
 276                          * No default pinmux, it will follow EHCI, use an
 277                          * explicit pinmux override if EHCI is not enabled.
 278                          */
 279                 };
 280
 281                 vhub: usb-vhub@1e6a0000 {
 282                         compatible = "aspeed,ast2600-usb-vhub";
 283                         reg = <0x1e6a0000 0x350>;
 284                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 285                         clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
 286                         aspeed,vhub-downstream-ports = <7>;
 287                         aspeed,vhub-generic-endpoints = <21>;
 288                         pinctrl-names = "default";
 289                         pinctrl-0 = <&pinctrl_usb2ad_default>;
 290                         status = "disabled";
 291                 };
 292
 293                 apb {
 294                         compatible = "simple-bus";
 295                         #address-cells = <1>;
 296                         #size-cells = <1>;
 297                         ranges;
 298
 299                         syscon: syscon@1e6e2000 {
 300                                 compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
 301                                 reg = <0x1e6e2000 0x1000>;
 302                                 ranges = <0 0x1e6e2000 0x1000>;
 303                                 #address-cells = <1>;
 304                                 #size-cells = <1>;
 305                                 #clock-cells = <1>;
 306                                 #reset-cells = <1>;
 307
 308                                 pinctrl: pinctrl {
 309                                         compatible = "aspeed,ast2600-pinctrl";
 310                                 };
 311
 312                                 smp-memram@180 {
 313                                         compatible = "aspeed,ast2600-smpmem";
 314                                         reg = <0x180 0x40>;
 315                                 };
 316                         };
 317
 318                         rng: hwrng@1e6e2524 {
 319                                 compatible = "timeriomem_rng";
 320                                 reg = <0x1e6e2524 0x4>;
 321                                 period = <1>;
 322                                 quality = <100>;
 323                         };
 324
 325                         gpio0: gpio@1e780000 {
 326                                 #gpio-cells = <2>;
 327                                 gpio-controller;
 328                                 compatible = "aspeed,ast2600-gpio";
 329                                 reg = <0x1e780000 0x800>;
 330                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 331                                 gpio-ranges = <&pinctrl 0 0 208>;
 332                                 ngpios = <208>;
 333                                 clocks = <&syscon ASPEED_CLK_APB2>;
 334                                 interrupt-controller;
 335                                 #interrupt-cells = <2>;
 336                         };
 337
 338                         gpio1: gpio@1e780800 {
 339                                 #gpio-cells = <2>;
 340                                 gpio-controller;
 341                                 compatible = "aspeed,ast2600-gpio";
 342                                 reg = <0x1e780800 0x800>;
 343                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 344                                 gpio-ranges = <&pinctrl 0 208 36>;
 345                                 ngpios = <36>;
 346                                 clocks = <&syscon ASPEED_CLK_APB1>;
 347                                 interrupt-controller;
 348                                 #interrupt-cells = <2>;
 349                         };
 350
 351                         rtc: rtc@1e781000 {
 352                                 compatible = "aspeed,ast2600-rtc";
 353                                 reg = <0x1e781000 0x18>;
 354                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 355                                 status = "disabled";
 356                         };
 357
 358                         timer: timer@1e782000 {
 359                                 compatible = "aspeed,ast2600-timer";
 360                                 reg = <0x1e782000 0x90>;
 361                                 interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 362                                                 <&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 363                                                 <&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 364                                                 <&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 365                                                 <&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 366                                                 <&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 367                                                 <&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 368                                                 <&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 369                                 clocks = <&syscon ASPEED_CLK_APB1>;
 370                                 clock-names = "PCLK";
 371                         };
 372
 373                         uart1: serial@1e783000 {
 374                                 compatible = "ns16550a";
 375                                 reg = <0x1e783000 0x20>;
 376                                 reg-shift = <2>;
 377                                 reg-io-width = <4>;
 378                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 379                                 clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
 380                                 resets = <&lpc_reset 4>;
 381                                 no-loopback-test;
 382                                 pinctrl-names = "default";
 383                                 pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
 384                                 status = "disabled";
 385                         };
 386
 387                         uart5: serial@1e784000 {
 388                                 compatible = "ns16550a";
 389                                 reg = <0x1e784000 0x1000>;
 390                                 reg-shift = <2>;
 391                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 392                                 clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
 393                                 no-loopback-test;
 394                         };
 395
 396                         wdt1: watchdog@1e785000 {
 397                                 compatible = "aspeed,ast2600-wdt";
 398                                 reg = <0x1e785000 0x40>;
 399                         };
 400
 401                         wdt2: watchdog@1e785040 {
 402                                 compatible = "aspeed,ast2600-wdt";
 403                                 reg = <0x1e785040 0x40>;
 404                                 status = "disabled";
 405                         };
 406
 407                         wdt3: watchdog@1e785080 {
 408                                 compatible = "aspeed,ast2600-wdt";
 409                                 reg = <0x1e785080 0x40>;
 410                                 status = "disabled";
 411                         };
 412
 413                         wdt4: watchdog@1e7850c0 {
 414                                 compatible = "aspeed,ast2600-wdt";
 415                                 reg = <0x1e7850C0 0x40>;
 416                                 status = "disabled";
 417                         };
 418
 419                         lpc: lpc@1e789000 {
 420                                 compatible = "aspeed,ast2600-lpc", "simple-mfd";
 421                                 reg = <0x1e789000 0x1000>;
 422
 423                                 #address-cells = <1>;
 424                                 #size-cells = <1>;
 425                                 ranges = <0x0 0x1e789000 0x1000>;
 426
 427                                 lpc_bmc: lpc-bmc@0 {
 428                                         compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
 429                                         reg = <0x0 0x80>;
 430                                         reg-io-width = <4>;
 431
 432                                         #address-cells = <1>;
 433                                         #size-cells = <1>;
 434                                         ranges = <0x0 0x0 0x80>;
 435
 436                                         kcs1: kcs1@0 {
 437                                                 compatible = "aspeed,ast2600-kcs-bmc";
 438                                                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 439                                                 kcs_chan = <1>;
 440                                                 status = "disabled";
 441                                         };
 442                                         kcs2: kcs2@0 {
 443                                                 compatible = "aspeed,ast2600-kcs-bmc";
 444                                                 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 445                                                 kcs_chan = <2>;
 446                                                 status = "disabled";
 447                                         };
 448                                         kcs3: kcs3@0 {
 449                                                 compatible = "aspeed,ast2600-kcs-bmc";
 450                                                 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 451                                                 kcs_chan = <3>;
 452                                                 status = "disabled";
 453                                         };
 454                                 };
 455
 456                                 lpc_host: lpc-host@80 {
 457                                         compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
 458                                         reg = <0x80 0x1e0>;
 459                                         reg-io-width = <4>;
 460
 461                                         #address-cells = <1>;
 462                                         #size-cells = <1>;
 463                                         ranges = <0x0 0x80 0x1e0>;
 464
 465                                         kcs4: kcs4@0 {
 466                                                 compatible = "aspeed,ast2600-kcs-bmc";
 467                                                 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 468                                                 kcs_chan = <4>;
 469                                                 status = "disabled";
 470                                         };
 471
 472                                         lpc_ctrl: lpc-ctrl@0 {
 473                                                 compatible = "aspeed,ast2600-lpc-ctrl";
 474                                                 reg = <0x0 0x80>;
 475                                                 clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 476                                                 status = "disabled";
 477                                         };
 478
 479                                         lpc_snoop: lpc-snoop@0 {
 480                                                 compatible = "aspeed,ast2600-lpc-snoop";
 481                                                 reg = <0x0 0x80>;
 482                                                 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 483                                                 status = "disabled";
 484                                         };
 485
 486                                         lhc: lhc@20 {
 487                                                 compatible = "aspeed,ast2600-lhc";
 488                                                 reg = <0x20 0x24 0x48 0x8>;
 489                                         };
 490
 491                                         lpc_reset: reset-controller@18 {
 492                                                 compatible = "aspeed,ast2600-lpc-reset";
 493                                                 reg = <0x18 0x4>;
 494                                                 #reset-cells = <1>;
 495                                         };
 496
 497                                         ibt: ibt@c0 {
 498                                                 compatible = "aspeed,ast2600-ibt-bmc";
 499                                                 reg = <0xc0 0x18>;
 500                                                 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 501                                                 status = "disabled";
 502                                         };
 503                                 };
 504                         };
 505
 506                         sdc: sdc@1e740000 {
 507                                 compatible = "aspeed,ast2600-sd-controller";
 508                                 reg = <0x1e740000 0x100>;
 509                                 #address-cells = <1>;
 510                                 #size-cells = <1>;
 511                                 ranges = <0 0x1e740000 0x10000>;
 512                                 clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
 513                                 status = "disabled";
 514
 515                                 sdhci0: sdhci@1e740100 {
 516                                         compatible = "aspeed,ast2600-sdhci", "sdhci";
 517                                         reg = <0x100 0x100>;
 518                                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 519                                         sdhci,auto-cmd12;
 520                                         clocks = <&syscon ASPEED_CLK_SDIO>;
 521                                         status = "disabled";
 522                                 };
 523
 524                                 sdhci1: sdhci@1e740200 {
 525                                         compatible = "aspeed,ast2600-sdhci", "sdhci";
 526                                         reg = <0x200 0x100>;
 527                                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 528                                         sdhci,auto-cmd12;
 529                                         clocks = <&syscon ASPEED_CLK_SDIO>;
 530                                         status = "disabled";
 531                                 };
 532                         };
 533
 534                         emmc_controller: sdc@1e750000 {
 535                                 compatible = "aspeed,ast2600-sd-controller";
 536                                 reg = <0x1e750000 0x100>;
 537                                 #address-cells = <1>;
 538                                 #size-cells = <1>;
 539                                 ranges = <0 0x1e750000 0x10000>;
 540                                 clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
 541                                 status = "disabled";
 542
 543                                 emmc: sdhci@1e750100 {
 544                                         compatible = "aspeed,ast2600-sdhci";
 545                                         reg = <0x100 0x100>;
 546                                         sdhci,auto-cmd12;
 547                                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 548                                         clocks = <&syscon ASPEED_CLK_EMMC>;
 549                                         pinctrl-names = "default";
 550                                         pinctrl-0 = <&pinctrl_emmc_default>;
 551                                 };
 552                         };
 553
 554                         vuart1: serial@1e787000 {
 555                                 compatible = "aspeed,ast2500-vuart";
 556                                 reg = <0x1e787000 0x40>;
 557                                 reg-shift = <2>;
 558                                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 559                                 clocks = <&syscon ASPEED_CLK_APB1>;
 560                                 no-loopback-test;
 561                                 status = "disabled";
 562                         };
 563
 564                         vuart2: serial@1e788000 {
 565                                 compatible = "aspeed,ast2500-vuart";
 566                                 reg = <0x1e788000 0x40>;
 567                                 reg-shift = <2>;
 568                                 interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 569                                 clocks = <&syscon ASPEED_CLK_APB1>;
 570                                 no-loopback-test;
 571                                 status = "disabled";
 572                         };
 573
 574                         uart2: serial@1e78d000 {
 575                                 compatible = "ns16550a";
 576                                 reg = <0x1e78d000 0x20>;
 577                                 reg-shift = <2>;
 578                                 reg-io-width = <4>;
 579                                 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 580                                 clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
 581                                 resets = <&lpc_reset 5>;
 582                                 no-loopback-test;
 583                                 pinctrl-names = "default";
 584                                 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
 585                                 status = "disabled";
 586                         };
 587
 588                         uart3: serial@1e78e000 {
 589                                 compatible = "ns16550a";
 590                                 reg = <0x1e78e000 0x20>;
 591                                 reg-shift = <2>;
 592                                 reg-io-width = <4>;
 593                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 594                                 clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
 595                                 resets = <&lpc_reset 6>;
 596                                 no-loopback-test;
 597                                 pinctrl-names = "default";
 598                                 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
 599                                 status = "disabled";
 600                         };
 601
 602                         uart4: serial@1e78f000 {
 603                                 compatible = "ns16550a";
 604                                 reg = <0x1e78f000 0x20>;
 605                                 reg-shift = <2>;
 606                                 reg-io-width = <4>;
 607                                 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 608                                 clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
 609                                 resets = <&lpc_reset 7>;
 610                                 no-loopback-test;
 611                                 pinctrl-names = "default";
 612                                 pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
 613                                 status = "disabled";
 614                         };
 615
 616                         i2c: bus@1e78a000 {
 617                                 compatible = "simple-bus";
 618                                 #address-cells = <1>;
 619                                 #size-cells = <1>;
 620                                 ranges = <0 0x1e78a000 0x1000>;
 621                         };
 622
 623                         fsim0: fsi@1e79b000 {
 624                                 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 625                                 reg = <0x1e79b000 0x94>;
 626                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 627                                 pinctrl-names = "default";
 628                                 pinctrl-0 = <&pinctrl_fsi1_default>;
 629                                 clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
 630                                 status = "disabled";
 631                         };
 632
 633                         fsim1: fsi@1e79b100 {
 634                                 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 635                                 reg = <0x1e79b100 0x94>;
 636                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 637                                 pinctrl-names = "default";
 638                                 pinctrl-0 = <&pinctrl_fsi2_default>;
 639                                 clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
 640                                 status = "disabled";
 641                         };
 642                 };
 643         };
 644 };
 645
 646 #include "aspeed-g6-pinctrl.dtsi"
 647
 648 &i2c {
 649         i2c0: i2c-bus@80 {
 650                 #address-cells = <1>;
 651                 #size-cells = <0>;
 652                 #interrupt-cells = <1>;
 653                 reg = <0x80 0x80>;
 654                 compatible = "aspeed,ast2600-i2c-bus";
 655                 clocks = <&syscon ASPEED_CLK_APB2>;
 656                 resets = <&syscon ASPEED_RESET_I2C>;
 657                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 658                 bus-frequency = <100000>;
 659                 pinctrl-names = "default";
 660                 pinctrl-0 = <&pinctrl_i2c1_default>;
 661                 status = "disabled";
 662         };
 663
 664         i2c1: i2c-bus@100 {
 665                 #address-cells = <1>;
 666                 #size-cells = <0>;
 667                 #interrupt-cells = <1>;
 668                 reg = <0x100 0x80>;
 669                 compatible = "aspeed,ast2600-i2c-bus";
 670                 clocks = <&syscon ASPEED_CLK_APB2>;
 671                 resets = <&syscon ASPEED_RESET_I2C>;
 672                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 673                 bus-frequency = <100000>;
 674                 pinctrl-names = "default";
 675                 pinctrl-0 = <&pinctrl_i2c2_default>;
 676                 status = "disabled";
 677         };
 678
 679         i2c2: i2c-bus@180 {
 680                 #address-cells = <1>;
 681                 #size-cells = <0>;
 682                 #interrupt-cells = <1>;
 683                 reg = <0x180 0x80>;
 684                 compatible = "aspeed,ast2600-i2c-bus";
 685                 clocks = <&syscon ASPEED_CLK_APB2>;
 686                 resets = <&syscon ASPEED_RESET_I2C>;
 687                 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 688                 bus-frequency = <100000>;
 689                 pinctrl-names = "default";
 690                 pinctrl-0 = <&pinctrl_i2c3_default>;
 691                 status = "disabled";
 692         };
 693
 694         i2c3: i2c-bus@200 {
 695                 #address-cells = <1>;
 696                 #size-cells = <0>;
 697                 #interrupt-cells = <1>;
 698                 reg = <0x200 0x80>;
 699                 compatible = "aspeed,ast2600-i2c-bus";
 700                 clocks = <&syscon ASPEED_CLK_APB2>;
 701                 resets = <&syscon ASPEED_RESET_I2C>;
 702                 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 703                 bus-frequency = <100000>;
 704                 pinctrl-names = "default";
 705                 pinctrl-0 = <&pinctrl_i2c4_default>;
 706                 status = "disabled";
 707         };
 708
 709         i2c4: i2c-bus@280 {
 710                 #address-cells = <1>;
 711                 #size-cells = <0>;
 712                 #interrupt-cells = <1>;
 713                 reg = <0x280 0x80>;
 714                 compatible = "aspeed,ast2600-i2c-bus";
 715                 clocks = <&syscon ASPEED_CLK_APB2>;
 716                 resets = <&syscon ASPEED_RESET_I2C>;
 717                 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 718                 bus-frequency = <100000>;
 719                 pinctrl-names = "default";
 720                 pinctrl-0 = <&pinctrl_i2c5_default>;
 721                 status = "disabled";
 722         };
 723
 724         i2c5: i2c-bus@300 {
 725                 #address-cells = <1>;
 726                 #size-cells = <0>;
 727                 #interrupt-cells = <1>;
 728                 reg = <0x300 0x80>;
 729                 compatible = "aspeed,ast2600-i2c-bus";
 730                 clocks = <&syscon ASPEED_CLK_APB2>;
 731                 resets = <&syscon ASPEED_RESET_I2C>;
 732                 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 733                 bus-frequency = <100000>;
 734                 pinctrl-names = "default";
 735                 pinctrl-0 = <&pinctrl_i2c6_default>;
 736                 status = "disabled";
 737         };
 738
 739         i2c6: i2c-bus@380 {
 740                 #address-cells = <1>;
 741                 #size-cells = <0>;
 742                 #interrupt-cells = <1>;
 743                 reg = <0x380 0x80>;
 744                 compatible = "aspeed,ast2600-i2c-bus";
 745                 clocks = <&syscon ASPEED_CLK_APB2>;
 746                 resets = <&syscon ASPEED_RESET_I2C>;
 747                 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 748                 bus-frequency = <100000>;
 749                 pinctrl-names = "default";
 750                 pinctrl-0 = <&pinctrl_i2c7_default>;
 751                 status = "disabled";
 752         };
 753
 754         i2c7: i2c-bus@400 {
 755                 #address-cells = <1>;
 756                 #size-cells = <0>;
 757                 #interrupt-cells = <1>;
 758                 reg = <0x400 0x80>;
 759                 compatible = "aspeed,ast2600-i2c-bus";
 760                 clocks = <&syscon ASPEED_CLK_APB2>;
 761                 resets = <&syscon ASPEED_RESET_I2C>;
 762                 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 763                 bus-frequency = <100000>;
 764                 pinctrl-names = "default";
 765                 pinctrl-0 = <&pinctrl_i2c8_default>;
 766                 status = "disabled";
 767         };
 768
 769         i2c8: i2c-bus@480 {
 770                 #address-cells = <1>;
 771                 #size-cells = <0>;
 772                 #interrupt-cells = <1>;
 773                 reg = <0x480 0x80>;
 774                 compatible = "aspeed,ast2600-i2c-bus";
 775                 clocks = <&syscon ASPEED_CLK_APB2>;
 776                 resets = <&syscon ASPEED_RESET_I2C>;
 777                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 778                 bus-frequency = <100000>;
 779                 pinctrl-names = "default";
 780                 pinctrl-0 = <&pinctrl_i2c9_default>;
 781                 status = "disabled";
 782         };
 783
 784         i2c9: i2c-bus@500 {
 785                 #address-cells = <1>;
 786                 #size-cells = <0>;
 787                 #interrupt-cells = <1>;
 788                 reg = <0x500 0x80>;
 789                 compatible = "aspeed,ast2600-i2c-bus";
 790                 clocks = <&syscon ASPEED_CLK_APB2>;
 791                 resets = <&syscon ASPEED_RESET_I2C>;
 792                 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 793                 bus-frequency = <100000>;
 794                 pinctrl-names = "default";
 795                 pinctrl-0 = <&pinctrl_i2c10_default>;
 796                 status = "disabled";
 797         };
 798
 799         i2c10: i2c-bus@580 {
 800                 #address-cells = <1>;
 801                 #size-cells = <0>;
 802                 #interrupt-cells = <1>;
 803                 reg = <0x580 0x80>;
 804                 compatible = "aspeed,ast2600-i2c-bus";
 805                 clocks = <&syscon ASPEED_CLK_APB2>;
 806                 resets = <&syscon ASPEED_RESET_I2C>;
 807                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 808                 bus-frequency = <100000>;
 809                 pinctrl-names = "default";
 810                 pinctrl-0 = <&pinctrl_i2c11_default>;
 811                 status = "disabled";
 812         };
 813
 814         i2c11: i2c-bus@600 {
 815                 #address-cells = <1>;
 816                 #size-cells = <0>;
 817                 #interrupt-cells = <1>;
 818                 reg = <0x600 0x80>;
 819                 compatible = "aspeed,ast2600-i2c-bus";
 820                 clocks = <&syscon ASPEED_CLK_APB2>;
 821                 resets = <&syscon ASPEED_RESET_I2C>;
 822                 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 823                 bus-frequency = <100000>;
 824                 pinctrl-names = "default";
 825                 pinctrl-0 = <&pinctrl_i2c12_default>;
 826                 status = "disabled";
 827         };
 828
 829         i2c12: i2c-bus@680 {
 830                 #address-cells = <1>;
 831                 #size-cells = <0>;
 832                 #interrupt-cells = <1>;
 833                 reg = <0x680 0x80>;
 834                 compatible = "aspeed,ast2600-i2c-bus";
 835                 clocks = <&syscon ASPEED_CLK_APB2>;
 836                 resets = <&syscon ASPEED_RESET_I2C>;
 837                 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 838                 bus-frequency = <100000>;
 839                 pinctrl-names = "default";
 840                 pinctrl-0 = <&pinctrl_i2c13_default>;
 841                 status = "disabled";
 842         };
 843
 844         i2c13: i2c-bus@700 {
 845                 #address-cells = <1>;
 846                 #size-cells = <0>;
 847                 #interrupt-cells = <1>;
 848                 reg = <0x700 0x80>;
 849                 compatible = "aspeed,ast2600-i2c-bus";
 850                 clocks = <&syscon ASPEED_CLK_APB2>;
 851                 resets = <&syscon ASPEED_RESET_I2C>;
 852                 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 853                 bus-frequency = <100000>;
 854                 pinctrl-names = "default";
 855                 pinctrl-0 = <&pinctrl_i2c14_default>;
 856                 status = "disabled";
 857         };
 858
 859         i2c14: i2c-bus@780 {
 860                 #address-cells = <1>;
 861                 #size-cells = <0>;
 862                 #interrupt-cells = <1>;
 863                 reg = <0x780 0x80>;
 864                 compatible = "aspeed,ast2600-i2c-bus";
 865                 clocks = <&syscon ASPEED_CLK_APB2>;
 866                 resets = <&syscon ASPEED_RESET_I2C>;
 867                 interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 868                 bus-frequency = <100000>;
 869                 pinctrl-names = "default";
 870                 pinctrl-0 = <&pinctrl_i2c15_default>;
 871                 status = "disabled";
 872         };
 873
 874         i2c15: i2c-bus@800 {
 875                 #address-cells = <1>;
 876                 #size-cells = <0>;
 877                 #interrupt-cells = <1>;
 878                 reg = <0x800 0x80>;
 879                 compatible = "aspeed,ast2600-i2c-bus";
 880                 clocks = <&syscon ASPEED_CLK_APB2>;
 881                 resets = <&syscon ASPEED_RESET_I2C>;
 882                 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 883                 bus-frequency = <100000>;
 884                 pinctrl-names = "default";
 885                 pinctrl-0 = <&pinctrl_i2c16_default>;
 886                 status = "disabled";
 887         };
 888 };