arch/arm/boot/dts/armada-370-netgear-rn102.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NETGEAR ReadyNAS 102
   4  *
   5  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/input/input.h>
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include "armada-370.dtsi"
  13
  14 / {
  15         model = "NETGEAR ReadyNAS 102";
  16         compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
  17
  18         chosen {
  19                 stdout-path = "serial0:115200n8";
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24                 reg = <0x00000000 0x20000000>; /* 512 MB */
  25         };
  26
  27         soc {
  28                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
  29                           MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
  30                           MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
  31
  32                 internal-regs {
  33
  34                         /* RTC is provided by Intersil ISL12057 I2C RTC chip */
  35                         rtc@10300 {
  36                                 status = "disabled";
  37                         };
  38
  39                         serial@12000 {
  40                                 status = "okay";
  41                         };
  42
  43                         /* eSATA interface */
  44                         sata@a0000 {
  45                                 nr-ports = <1>;
  46                                 status = "okay";
  47                         };
  48
  49                         ethernet@74000 {
  50                                 pinctrl-0 = <&ge1_rgmii_pins>;
  51                                 pinctrl-names = "default";
  52                                 status = "okay";
  53                                 phy = <&phy0>;
  54                                 phy-mode = "rgmii-id";
  55                         };
  56
  57                         usb@50000 {
  58                                 status = "okay";
  59                         };
  60
  61                         i2c@11000 {
  62                                 clock-frequency = <100000>;
  63
  64                                 pinctrl-0 = <&i2c0_pins>;
  65                                 pinctrl-names = "default";
  66
  67                                 status = "okay";
  68
  69                                 isl12057: rtc@68 {
  70                                         compatible = "isil,isl12057";
  71                                         reg = <0x68>;
  72                                         wakeup-source;
  73                                 };
  74
  75                                 g762: g762@3e {
  76                                         compatible = "gmt,g762";
  77                                         reg = <0x3e>;
  78                                         clocks = <&g762_clk>; /* input clock */
  79                                         fan_gear_mode = <0>;
  80                                         fan_startv = <1>;
  81                                         pwm_polarity = <0>;
  82                                 };
  83                         };
  84
  85                         nand@d0000 {
  86                                 status = "okay";
  87                                 num-cs = <1>;
  88                                 marvell,nand-keep-config;
  89                                 marvell,nand-enable-arbiter;
  90                                 nand-on-flash-bbt;
  91
  92                                 /* Use Hardware BCH ECC */
  93                                 nand-ecc-strength = <4>;
  94                                 nand-ecc-step-size = <512>;
  95
  96                                 partition@0 {
  97                                         label = "u-boot";
  98                                         reg = <0x0000000 0x180000>;  /* 1.5MB */
  99                                         read-only;
 100                                 };
 101
 102                                 partition@180000 {
 103                                         label = "u-boot-env";
 104                                         reg = <0x180000 0x20000>;    /* 128KB */
 105                                         read-only;
 106                                 };
 107
 108                                 partition@200000 {
 109                                         label = "uImage";
 110                                         reg = <0x0200000 0x600000>;    /* 6MB */
 111                                 };
 112
 113                                 partition@800000 {
 114                                         label = "minirootfs";
 115                                         reg = <0x0800000 0x400000>;    /* 4MB */
 116                                 };
 117
 118                                 /* Last MB is for the BBT, i.e. not writable */
 119                                 partition@c00000 {
 120                                         label = "ubifs";
 121                                         reg = <0x0c00000 0x7400000>; /* 116MB */
 122                                 };
 123                         };
 124                 };
 125         };
 126
 127         clocks {
 128                g762_clk: g762-oscillator {
 129                          compatible = "fixed-clock";
 130                          #clock-cells = <0>;
 131                          clock-frequency = <8192>;
 132                };
 133         };
 134
 135         gpio-leds {
 136                 compatible = "gpio-leds";
 137                 pinctrl-0 = <&power_led_pin
 138                              &sata1_led_pin
 139                              &sata2_led_pin
 140                              &backup_led_pin>;
 141                 pinctrl-names = "default";
 142
 143                 blue-power-led {
 144                         label = "rn102:blue:pwr";
 145                         gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 146                         default-state = "keep";
 147                 };
 148
 149                 blue-sata1-led {
 150                         label = "rn102:blue:sata1";
 151                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 152                         default-state = "on";
 153                 };
 154
 155                 blue-sata2-led {
 156                         label = "rn102:blue:sata2";
 157                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 158                         default-state = "on";
 159                 };
 160
 161                 blue-backup-led {
 162                         label = "rn102:blue:backup";
 163                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 164                         default-state = "on";
 165                 };
 166         };
 167
 168         gpio-keys {
 169                 compatible = "gpio-keys";
 170                 pinctrl-0 = <&power_button_pin
 171                              &reset_button_pin
 172                              &backup_button_pin>;
 173                 pinctrl-names = "default";
 174
 175                 power-button {
 176                         label = "Power Button";
 177                         linux,code = <KEY_POWER>;
 178                         gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 179                 };
 180
 181                 reset-button {
 182                         label = "Reset Button";
 183                         linux,code = <KEY_RESTART>;
 184                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 185                 };
 186
 187                 backup-button {
 188                         label = "Backup Button";
 189                         linux,code = <KEY_COPY>;
 190                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 191                 };
 192         };
 193
 194         gpio-poweroff {
 195                 compatible = "gpio-poweroff";
 196                 pinctrl-0 = <&poweroff>;
 197                 pinctrl-names = "default";
 198                 gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 199         };
 200 };
 201
 202 &pciec {
 203         status = "okay";
 204
 205         /* Connected to Marvell 88SE9170 SATA controller */
 206         pcie@1,0 {
 207                 /* Port 0, Lane 0 */
 208                 status = "okay";
 209         };
 210
 211         /* Connected to FL1009 USB 3.0 controller */
 212         pcie@2,0 {
 213                 /* Port 1, Lane 0 */
 214                 status = "okay";
 215         };
 216 };
 217
 218 &mdio {
 219         pinctrl-0 = <&mdio_pins>;
 220         pinctrl-names = "default";
 221         phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 222                 reg = <0>;
 223         };
 224 };
 225
 226 &pinctrl {
 227         power_led_pin: power-led-pin {
 228                 marvell,pins = "mpp57";
 229                 marvell,function = "gpio";
 230         };
 231
 232         sata1_led_pin: sata1-led-pin {
 233                 marvell,pins = "mpp15";
 234                 marvell,function = "gpio";
 235         };
 236
 237         sata2_led_pin: sata2-led-pin {
 238                 marvell,pins = "mpp14";
 239                 marvell,function = "gpio";
 240         };
 241
 242         backup_led_pin: backup-led-pin {
 243                 marvell,pins = "mpp56";
 244                 marvell,function = "gpio";
 245         };
 246
 247         backup_button_pin: backup-button-pin {
 248                 marvell,pins = "mpp58";
 249                 marvell,function = "gpio";
 250         };
 251
 252         power_button_pin: power-button-pin {
 253                 marvell,pins = "mpp62";
 254                 marvell,function = "gpio";
 255         };
 256
 257         reset_button_pin: reset-button-pin {
 258                 marvell,pins = "mpp6";
 259                 marvell,function = "gpio";
 260         };
 261
 262         poweroff: poweroff {
 263                 marvell,pins = "mpp8";
 264                 marvell,function = "gpio";
 265         };
 266 };