arch/arm/boot/dts/am3517-evm.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5 /dts-v1/;
   6
   7 #include "am3517.dtsi"
   8 #include "am3517-som.dtsi"
   9 #include "am3517-evm-ui.dtsi"
  10 #include <dt-bindings/input/input.h>
  11
  12 / {
  13         model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
  14         compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
  15
  16         aliases {
  17                 display0 = &lcd0;
  18         };
  19
  20         chosen {
  21                 stdout-path = &uart3;
  22         };
  23
  24         memory@80000000 {
  25                 device_type = "memory";
  26                 reg = <0x80000000 0x10000000>; /* 256 MB */
  27         };
  28
  29         vmmc_fixed: vmmc {
  30                 compatible = "regulator-fixed";
  31                 regulator-name = "vmmc_fixed";
  32                 regulator-min-microvolt = <3300000>;
  33                 regulator-max-microvolt = <3300000>;
  34         };
  35
  36         gpio-keys {
  37                 compatible = "gpio-keys-polled";
  38                 poll-interval = <100>;
  39
  40                 user_pb {
  41                         label = "User Push Button";
  42                         linux,code = <BTN_0>;
  43                         gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 user_sw_1 {
  47                         label = "User Switch 1";
  48                         linux,code = <BTN_1>;
  49                         gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 user_sw_2 {
  53                         label = "User Switch 2";
  54                         linux,code = <BTN_2>;
  55                         gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 user_sw_3 {
  59                         label = "User Switch 3";
  60                         linux,code = <BTN_3>;
  61                         gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 user_sw_4 {
  65                         label = "User Switch 4";
  66                         linux,code = <BTN_4>;
  67                         gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 user_sw_5 {
  71                         label = "User Switch 5";
  72                         linux,code = <BTN_5>;
  73                         gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 user_sw_6 {
  77                         label = "User Switch 6";
  78                         linux,code = <BTN_6>;
  79                         gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 user_sw_7 {
  83                         label = "User Switch 7";
  84                         linux,code = <BTN_7>;
  85                         gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 user_sw_8 {
  89                         label = "User Switch 8";
  90                         linux,code = <BTN_8>;
  91                         gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
  92                 };
  93         };
  94
  95         gpio-leds {
  96                 compatible = "gpio-leds";
  97
  98                 pinctrl-names = "default";
  99                 pinctrl-0 = <&leds_pins>;
 100
 101                 user_led_1 {
 102                         label = "am3517evm:green:user_led_1";
 103                         gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
 104                         default-state = "on";
 105                 };
 106
 107                 user_led_2 {
 108                         label = "am3517evm:green:user_led_2";
 109                         gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
 110                         default-state = "on";
 111                 };
 112
 113                 user_led_3 {
 114                         label = "am3517evm:green:user_led_3";
 115                         gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 116                         linux,default-trigger = "mmc0"; /* SD/MMC card activity */
 117                 };
 118
 119                 user_led_4 {
 120                         label = "am3517evm:green:user_led_4";
 121                         gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 122                         linux,default-trigger = "heartbeat";
 123                 };
 124         };
 125
 126         lcd0: display@0 {
 127                 /* This isn't the exact LCD, but the timings meet spec */
 128                 /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
 129                 compatible = "newhaven,nhd-4.3-480272ef-atxl";
 130                 label = "15";
 131                 backlight = <&bl>;
 132                 enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;    /* gpio176, lcd INI */
 133                 vcc-supply = <&vdd_io_reg>;
 134
 135                 port {
 136                         lcd_in: endpoint {
 137                                 remote-endpoint = <&dpi_out>;
 138                         };
 139                 };
 140         };
 141
 142         bl: backlight {
 143                 compatible = "pwm-backlight";
 144                 pinctrl-names = "default";
 145                 power-supply = <&vdd_io_reg>;
 146                 pinctrl-0 = <&backlight_pins>;
 147                 pwms = <&pwm11 0 5000000 0>;
 148                 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 149                 default-brightness-level = <7>;
 150                 enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 151         };
 152
 153         pwm11: dmtimer-pwm@11 {
 154                 compatible = "ti,omap-dmtimer-pwm";
 155                 pinctrl-names = "default";
 156                 pinctrl-0 = <&pwm_pins>;
 157                 ti,timers = <&timer11>;
 158                 #pwm-cells = <3>;
 159         };
 160
 161         /* HS USB Host PHY on PORT 1 */
 162         hsusb1_phy: hsusb1_phy {
 163                 compatible = "usb-nop-xceiv";
 164                 reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 165                 #phy-cells = <0>;
 166         };
 167 };
 168
 169 &davinci_emac {
 170              status = "okay";
 171 };
 172
 173 &davinci_mdio {
 174              status = "okay";
 175 };
 176
 177 &dss {
 178         status = "ok";
 179
 180         pinctrl-names = "default";
 181         pinctrl-0 = <&dss_dpi_pins>;
 182
 183         vdds_dsi-supply = <&vdd_io_reg>;
 184         vdda_video-supply = <&vdd_io_reg>;
 185
 186         port {
 187                 dpi_out: endpoint {
 188                         remote-endpoint = <&lcd_in>;
 189                         data-lines = <16>;
 190                 };
 191         };
 192 };
 193
 194 &i2c2 {
 195         clock-frequency = <400000>;
 196         /* User DIP swithes [1:8] / User LEDS [1:2] */
 197         tca6416: gpio@21 {
 198                 compatible = "ti,tca6416";
 199                 reg = <0x21>;
 200                 gpio-controller;
 201                 #gpio-cells = <2>;
 202                 vcc-supply = <&vdd_io_reg>;
 203         };
 204 };
 205
 206 &i2c3 {
 207         clock-frequency = <400000>;
 208 };
 209
 210 &mmc1 {
 211         status = "okay";
 212         pinctrl-names = "default";
 213         pinctrl-0 = <&mmc1_pins>;
 214         vmmc-supply = <&vmmc_fixed>;
 215         bus-width = <4>;
 216         wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
 217         cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 218 };
 219
 220 &mmc3 {
 221       status = "disabled";
 222 };
 223
 224 &usbhshost {
 225         port1-mode = "ehci-phy";
 226 };
 227
 228 &usbhsehci {
 229         phys = <&hsusb1_phy>;
 230 };
 231
 232 &omap3_pmx_core {
 233         pinctrl-names = "default";
 234         pinctrl-0 = <&hsusb1_rst_pins>;
 235
 236         leds_pins: pinmux_leds_pins {
 237                 pinctrl-single,pins = <
 238                         OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
 239                         OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
 240                 >;
 241         };
 242
 243         mmc1_pins: pinmux_mmc1_pins {
 244                 pinctrl-single,pins = <
 245                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
 246                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
 247                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
 248                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
 249                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
 250                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
 251                         OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
 252                         OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
 253                 >;
 254         };
 255
 256         pwm_pins: pinmux_pwm_pins {
 257                 pinctrl-single,pins = <
 258                         OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
 259                 >;
 260         };
 261
 262         backlight_pins: pinmux_backlight_pins {
 263                 pinctrl-single,pins = <
 264                         OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
 265                 >;
 266         };
 267
 268         dss_dpi_pins: pinmux_dss_dpi_pins {
 269                 pinctrl-single,pins = <
 270                         OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
 271                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
 272                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
 273                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
 274                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
 275                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
 276                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
 277                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
 278                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
 279                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
 280                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
 281                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
 282                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
 283                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
 284                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
 285                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
 286                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
 287                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
 288                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
 289                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
 290                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
 291                 >;
 292         };
 293
 294         hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
 295                 pinctrl-single,pins = <
 296                         OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)       /* gpmc_ncs6.gpio_57 */
 297                 >;
 298         };
 299 };
 300
 301 &omap3_pmx_core2 {
 302         pinctrl-names = "default";
 303         pinctrl-0 = <&hsusb1_pins>;
 304
 305         hsusb1_pins: pinmux_hsusb1_pins {
 306                 pinctrl-single,pins = <
 307                         OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)    /* etk_clk.hsusb1_stp */
 308                         OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)    /* etk_ctl.hsusb1_clk */
 309                         OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)     /* etk_d8.hsusb1_dir */
 310                         OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)     /* etk_d9.hsusb1_nxt */
 311                         OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)     /* etk_d0.hsusb1_data0 */
 312                         OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)     /* etk_d1.hsusb1_data1 */
 313                         OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)     /* etk_d2.hsusb1_data2 */
 314                         OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)     /* etk_d7.hsusb1_data3 */
 315                         OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)     /* etk_d4.hsusb1_data4 */
 316                         OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)     /* etk_d5.hsusb1_data5 */
 317                         OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)     /* etk_d6.hsusb1_data6 */
 318                         OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)     /* etk_d3.hsusb1_data7 */
 319                 >;
 320         };
 321 };