Merge tag 'arc-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
[linux-2.6-microblaze.git] / arch / arc / kernel / process.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  *
5  * Amit Bhor, Kanika Nema: Codito Technologies 2004
6  */
7
8 #include <linux/errno.h>
9 #include <linux/module.h>
10 #include <linux/sched.h>
11 #include <linux/sched/task.h>
12 #include <linux/sched/task_stack.h>
13
14 #include <linux/mm.h>
15 #include <linux/fs.h>
16 #include <linux/unistd.h>
17 #include <linux/ptrace.h>
18 #include <linux/slab.h>
19 #include <linux/syscalls.h>
20 #include <linux/elf.h>
21 #include <linux/tick.h>
22
23 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
24 {
25         task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
26         return 0;
27 }
28
29 /*
30  * We return the user space TLS data ptr as sys-call return code
31  * Ideally it should be copy to user.
32  * However we can cheat by the fact that some sys-calls do return
33  * absurdly high values
34  * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
35  * it won't be considered a sys-call error
36  * and it will be loads better than copy-to-user, which is a definite
37  * D-TLB Miss
38  */
39 SYSCALL_DEFINE0(arc_gettls)
40 {
41         return task_thread_info(current)->thr_ptr;
42 }
43
44 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
45 {
46         struct pt_regs *regs = current_pt_regs();
47         u32 uval;
48         int ret;
49
50         /*
51          * This is only for old cores lacking LLOCK/SCOND, which by defintion
52          * can't possibly be SMP. Thus doesn't need to be SMP safe.
53          * And this also helps reduce the overhead for serializing in
54          * the UP case
55          */
56         WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
57
58         /* Z indicates to userspace if operation succeded */
59         regs->status32 &= ~STATUS_Z_MASK;
60
61         ret = access_ok(uaddr, sizeof(*uaddr));
62         if (!ret)
63                  goto fail;
64
65 again:
66         preempt_disable();
67
68         ret = __get_user(uval, uaddr);
69         if (ret)
70                  goto fault;
71
72         if (uval != expected)
73                  goto out;
74
75         ret = __put_user(new, uaddr);
76         if (ret)
77                  goto fault;
78
79         regs->status32 |= STATUS_Z_MASK;
80
81 out:
82         preempt_enable();
83         return uval;
84
85 fault:
86         preempt_enable();
87
88         if (unlikely(ret != -EFAULT))
89                  goto fail;
90
91         down_read(&current->mm->mmap_sem);
92         ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
93                                FAULT_FLAG_WRITE, NULL);
94         up_read(&current->mm->mmap_sem);
95
96         if (likely(!ret))
97                  goto again;
98
99 fail:
100         force_sig(SIGSEGV, current);
101         return ret;
102 }
103
104 #ifdef CONFIG_ISA_ARCV2
105
106 void arch_cpu_idle(void)
107 {
108         /* Re-enable interrupts <= default irq priority before commiting SLEEP */
109         const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
110
111         __asm__ __volatile__(
112                 "sleep %0       \n"
113                 :
114                 :"I"(arg)); /* can't be "r" has to be embedded const */
115 }
116
117 #elif defined(CONFIG_EZNPS_MTM_EXT)     /* ARC700 variant in NPS */
118
119 void arch_cpu_idle(void)
120 {
121         /* only the calling HW thread needs to sleep */
122         __asm__ __volatile__(
123                 ".word %0       \n"
124                 :
125                 :"i"(CTOP_INST_HWSCHD_WFT_IE12));
126 }
127
128 #else   /* ARC700 */
129
130 void arch_cpu_idle(void)
131 {
132         /* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
133         __asm__ __volatile__("sleep 0x3 \n");
134 }
135
136 #endif
137
138 asmlinkage void ret_from_fork(void);
139
140 /*
141  * Copy architecture-specific thread state
142  *
143  * Layout of Child kernel mode stack as setup at the end of this function is
144  *
145  * |     ...        |
146  * |     ...        |
147  * |    unused      |
148  * |                |
149  * ------------------
150  * |     r25        |   <==== top of Stack (thread.ksp)
151  * ~                ~
152  * |    --to--      |   (CALLEE Regs of kernel mode)
153  * |     r13        |
154  * ------------------
155  * |     fp         |
156  * |    blink       |   @ret_from_fork
157  * ------------------
158  * |                |
159  * ~                ~
160  * ~                ~
161  * |                |
162  * ------------------
163  * |     r12        |
164  * ~                ~
165  * |    --to--      |   (scratch Regs of user mode)
166  * |     r0         |
167  * ------------------
168  * |      SP        |
169  * |    orig_r0     |
170  * |    event/ECR   |
171  * |    user_r25    |
172  * ------------------  <===== END of PAGE
173  */
174 int copy_thread(unsigned long clone_flags,
175                 unsigned long usp, unsigned long kthread_arg,
176                 struct task_struct *p)
177 {
178         struct pt_regs *c_regs;        /* child's pt_regs */
179         unsigned long *childksp;       /* to unwind out of __switch_to() */
180         struct callee_regs *c_callee;  /* child's callee regs */
181         struct callee_regs *parent_callee;  /* paren't callee */
182         struct pt_regs *regs = current_pt_regs();
183
184         /* Mark the specific anchors to begin with (see pic above) */
185         c_regs = task_pt_regs(p);
186         childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
187         c_callee = ((struct callee_regs *)childksp) - 1;
188
189         /*
190          * __switch_to() uses thread.ksp to start unwinding stack
191          * For kernel threads we don't need to create callee regs, the
192          * stack layout nevertheless needs to remain the same.
193          * Also, since __switch_to anyways unwinds callee regs, we use
194          * this to populate kernel thread entry-pt/args into callee regs,
195          * so that ret_from_kernel_thread() becomes simpler.
196          */
197         p->thread.ksp = (unsigned long)c_callee;        /* THREAD_KSP */
198
199         /* __switch_to expects FP(0), BLINK(return addr) at top */
200         childksp[0] = 0;                        /* fp */
201         childksp[1] = (unsigned long)ret_from_fork; /* blink */
202
203         if (unlikely(p->flags & PF_KTHREAD)) {
204                 memset(c_regs, 0, sizeof(struct pt_regs));
205
206                 c_callee->r13 = kthread_arg;
207                 c_callee->r14 = usp;  /* function */
208
209                 return 0;
210         }
211
212         /*--------- User Task Only --------------*/
213
214         /* __switch_to expects FP(0), BLINK(return addr) at top of stack */
215         childksp[0] = 0;                                /* for POP fp */
216         childksp[1] = (unsigned long)ret_from_fork;     /* for POP blink */
217
218         /* Copy parents pt regs on child's kernel mode stack */
219         *c_regs = *regs;
220
221         if (usp)
222                 c_regs->sp = usp;
223
224         c_regs->r0 = 0;         /* fork returns 0 in child */
225
226         parent_callee = ((struct callee_regs *)regs) - 1;
227         *c_callee = *parent_callee;
228
229         if (unlikely(clone_flags & CLONE_SETTLS)) {
230                 /*
231                  * set task's userland tls data ptr from 4th arg
232                  * clone C-lib call is difft from clone sys-call
233                  */
234                 task_thread_info(p)->thr_ptr = regs->r3;
235         } else {
236                 /* Normal fork case: set parent's TLS ptr in child */
237                 task_thread_info(p)->thr_ptr =
238                 task_thread_info(current)->thr_ptr;
239         }
240
241
242         /*
243          * setup usermode thread pointer #1:
244          * when child is picked by scheduler, __switch_to() uses @c_callee to
245          * populate usermode callee regs: this works (despite being in a kernel
246          * function) since special return path for child @ret_from_fork()
247          * ensures those regs are not clobbered all the way to RTIE to usermode
248          */
249         c_callee->r25 = task_thread_info(p)->thr_ptr;
250
251 #ifdef CONFIG_ARC_CURR_IN_REG
252         /*
253          * setup usermode thread pointer #2:
254          * however for this special use of r25 in kernel, __switch_to() sets
255          * r25 for kernel needs and only in the final return path is usermode
256          * r25 setup, from pt_regs->user_r25. So set that up as well
257          */
258         c_regs->user_r25 = c_callee->r25;
259 #endif
260
261         return 0;
262 }
263
264 /*
265  * Do necessary setup to start up a new user task
266  */
267 void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
268 {
269         regs->sp = usp;
270         regs->ret = pc;
271
272         /*
273          * [U]ser Mode bit set
274          * [L] ZOL loop inhibited to begin with - cleared by a LP insn
275          * Interrupts enabled
276          */
277         regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
278
279 #ifdef CONFIG_EZNPS_MTM_EXT
280         regs->eflags = 0;
281 #endif
282
283         /* bogus seed values for debugging */
284         regs->lp_start = 0x10;
285         regs->lp_end = 0x80;
286 }
287
288 /*
289  * Some archs flush debug and FPU info here
290  */
291 void flush_thread(void)
292 {
293 }
294
295 int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
296 {
297         return 0;
298 }
299
300 int elf_check_arch(const struct elf32_hdr *x)
301 {
302         unsigned int eflags;
303
304         if (x->e_machine != EM_ARC_INUSE) {
305                 pr_err("ELF not built for %s ISA\n",
306                         is_isa_arcompact() ? "ARCompact":"ARCv2");
307                 return 0;
308         }
309
310         eflags = x->e_flags;
311         if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
312                 pr_err("ABI mismatch - you need newer toolchain\n");
313                 force_sigsegv(SIGSEGV, current);
314                 return 0;
315         }
316
317         return 1;
318 }
319 EXPORT_SYMBOL(elf_check_arch);