ARCv2: intc: Use runtime value of irq count for setting up intc
[linux-2.6-microblaze.git] / arch / arc / kernel / intc-arcv2.c
1 /*
2  * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  *
8  */
9
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/irqdomain.h>
14 #include <linux/irqchip.h>
15 #include <asm/irq.h>
16
17 #define NR_EXCEPTIONS   16
18
19 struct bcr_irq_arcv2 {
20 #ifdef CONFIG_CPU_BIG_ENDIAN
21         unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
22 #else
23         unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
24 #endif
25 };
26
27 /*
28  * Early Hardware specific Interrupt setup
29  * -Called very early (start_kernel -> setup_arch -> setup_processor)
30  * -Platform Independent (must for any ARC Core)
31  * -Needed for each CPU (hence not foldable into init_IRQ)
32  */
33 void arc_init_IRQ(void)
34 {
35         unsigned int tmp, irq_prio;
36         struct bcr_irq_arcv2 irq_bcr;
37
38         struct aux_irq_ctrl {
39 #ifdef CONFIG_CPU_BIG_ENDIAN
40                 unsigned int res3:18, save_idx_regs:1, res2:1,
41                              save_u_to_u:1, save_lp_regs:1, save_blink:1,
42                              res:4, save_nr_gpr_pairs:5;
43 #else
44                 unsigned int save_nr_gpr_pairs:5, res:4,
45                              save_blink:1, save_lp_regs:1, save_u_to_u:1,
46                              res2:1, save_idx_regs:1, res3:18;
47 #endif
48         } ictrl;
49
50         *(unsigned int *)&ictrl = 0;
51
52         ictrl.save_nr_gpr_pairs = 6;    /* r0 to r11 (r12 saved manually) */
53         ictrl.save_blink = 1;
54         ictrl.save_lp_regs = 1;         /* LP_COUNT, LP_START, LP_END */
55         ictrl.save_u_to_u = 0;          /* user ctxt saved on kernel stack */
56         ictrl.save_idx_regs = 1;        /* JLI, LDI, EI */
57
58         WRITE_AUX(AUX_IRQ_CTRL, ictrl);
59
60         /*
61          * ARCv2 core intc provides multiple interrupt priorities (upto 16).
62          * Typical builds though have only two levels (0-high, 1-low)
63          * Linux by default uses lower prio 1 for most irqs, reserving 0 for
64          * NMI style interrupts in future (say perf)
65          */
66
67         READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
68
69         irq_prio = irq_bcr.prio;        /* Encoded as N-1 for N levels */
70         pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
71                 irq_prio + 1, ARCV2_IRQ_DEF_PRIO,
72                 irq_bcr.firq ? " FIRQ (not used)":"");
73
74         /* setup status32, don't enable intr yet as kernel doesn't want */
75         tmp = read_aux_reg(ARC_REG_STATUS32);
76         tmp |= STATUS_AD_MASK | (ARCV2_IRQ_DEF_PRIO << 1);
77         tmp &= ~STATUS_IE_MASK;
78         asm volatile("kflag %0  \n"::"r"(tmp));
79 }
80
81 static void arcv2_irq_mask(struct irq_data *data)
82 {
83         write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
84         write_aux_reg(AUX_IRQ_ENABLE, 0);
85 }
86
87 static void arcv2_irq_unmask(struct irq_data *data)
88 {
89         write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
90         write_aux_reg(AUX_IRQ_ENABLE, 1);
91 }
92
93 void arcv2_irq_enable(struct irq_data *data)
94 {
95         /* set default priority */
96         write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
97         write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
98
99         /*
100          * hw auto enables (linux unmask) all by default
101          * So no need to do IRQ_ENABLE here
102          * XXX: However OSCI LAN need it
103          */
104         write_aux_reg(AUX_IRQ_ENABLE, 1);
105 }
106
107 static struct irq_chip arcv2_irq_chip = {
108         .name           = "ARCv2 core Intc",
109         .irq_mask       = arcv2_irq_mask,
110         .irq_unmask     = arcv2_irq_unmask,
111         .irq_enable     = arcv2_irq_enable
112 };
113
114 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
115                          irq_hw_number_t hw)
116 {
117         /*
118          * core intc IRQs [16, 23]:
119          * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
120          */
121         if (hw < FIRST_EXT_IRQ) {
122                 /*
123                  * A subsequent request_percpu_irq() fails if percpu_devid is
124                  * not set. That in turns sets NOAUTOEN, meaning each core needs
125                  * to call enable_percpu_irq()
126                  */
127                 irq_set_percpu_devid(irq);
128                 irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
129         } else {
130                 irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
131         }
132
133         return 0;
134 }
135
136 static const struct irq_domain_ops arcv2_irq_ops = {
137         .xlate = irq_domain_xlate_onecell,
138         .map = arcv2_irq_map,
139 };
140
141
142 static int __init
143 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
144 {
145         struct irq_domain *root_domain;
146         struct bcr_irq_arcv2 irq_bcr;
147         unsigned int nr_cpu_irqs;
148
149         READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
150         nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS;
151
152         if (parent)
153                 panic("DeviceTree incore intc not a root irq controller\n");
154
155         root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
156         if (!root_domain)
157                 panic("root irq domain not avail\n");
158
159         /*
160          * Needed for primary domain lookup to succeed
161          * This is a primary irqchip, and can never have a parent
162          */
163         irq_set_default_host(root_domain);
164
165 #ifdef CONFIG_SMP
166         irq_create_mapping(root_domain, IPI_IRQ);
167 #endif
168         irq_create_mapping(root_domain, SOFTIRQ_IRQ);
169
170         return 0;
171 }
172
173 IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);