Merge branch 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
[linux-2.6-microblaze.git] / Documentation / networking / ipddp.rst
1 .. SPDX-License-Identifier: GPL-2.0
2
3 =========================================================
4 AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
5 =========================================================
6
7 Documentation ipddp.c
8
9 This file is written by Jay Schulist <jschlst@samba.org>
10
11 Introduction
12 ------------
13
14 AppleTalk-IP (IPDDP) is the method computers connected to AppleTalk
15 networks can use to communicate via IP. AppleTalk-IP is simply IP datagrams
16 inside AppleTalk packets.
17
18 Through this driver you can either allow your Linux box to communicate
19 IP over an AppleTalk network or you can provide IP gatewaying functions
20 for your AppleTalk users.
21
22 You can currently encapsulate or decapsulate AppleTalk-IP on LocalTalk,
23 EtherTalk and PPPTalk. The only limit on the protocol is that of what
24 kernel AppleTalk layer and drivers are available.
25
26 Each mode requires its own user space software.
27
28 Compiling AppleTalk-IP Decapsulation/Encapsulation
29 ==================================================
30
31 AppleTalk-IP decapsulation needs to be compiled into your kernel. You
32 will need to turn on AppleTalk-IP driver support. Then you will need to
33 select ONE of the two options; IP to AppleTalk-IP encapsulation support or
34 AppleTalk-IP to IP decapsulation support. If you compile the driver
35 statically you will only be able to use the driver for the function you have
36 enabled in the kernel. If you compile the driver as a module you can
37 select what mode you want it to run in via a module loading param.
38 ipddp_mode=1 for AppleTalk-IP encapsulation and ipddp_mode=2 for
39 AppleTalk-IP to IP decapsulation.
40
41 Basic instructions for user space tools
42 =======================================
43
44 I will briefly describe the operation of the tools, but you will
45 need to consult the supporting documentation for each set of tools.
46
47 Decapsulation - You will need to download a software package called
48 MacGate. In this distribution there will be a tool called MacRoute
49 which enables you to add routes to the kernel for your Macs by hand.
50 Also the tool MacRegGateWay is included to register the
51 proper IP Gateway and IP addresses for your machine. Included in this
52 distribution is a patch to netatalk-1.4b2+asun2.0a17.2 (available from
53 ftp.u.washington.edu/pub/user-supported/asun/) this patch is optional
54 but it allows automatic adding and deleting of routes for Macs. (Handy
55 for locations with large Mac installations)
56
57 Encapsulation - You will need to download a software daemon called ipddpd.
58 This software expects there to be an AppleTalk-IP gateway on the network.
59 You will also need to add the proper routes to route your Linux box's IP
60 traffic out the ipddp interface.
61
62 Common Uses of ipddp.c
63 ----------------------
64 Of course AppleTalk-IP decapsulation and encapsulation, but specifically
65 decapsulation is being used most for connecting LocalTalk networks to
66 IP networks. Although it has been used on EtherTalk networks to allow
67 Macs that are only able to tunnel IP over EtherTalk.
68
69 Encapsulation has been used to allow a Linux box stuck on a LocalTalk
70 network to use IP. It should work equally well if you are stuck on an
71 EtherTalk only network.
72
73 Further Assistance
74 -------------------
75 You can contact me (Jay Schulist <jschlst@samba.org>) with any
76 questions regarding decapsulation or encapsulation. Bradford W. Johnson
77 <johns393@maroon.tc.umn.edu> originally wrote the ipddp.c driver for IP
78 encapsulation in AppleTalk.