1 =============================
2 Netlink interface for ethtool
3 =============================
9 Netlink interface for ethtool uses generic netlink family ``ethtool``
10 (userspace application should use macros ``ETHTOOL_GENL_NAME`` and
11 ``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi
12 header). This family does not use a specific header, all information in
13 requests and replies is passed using netlink attributes.
15 The ethtool netlink interface uses extended ACK for error and warning
16 reporting, userspace application developers are encouraged to make these
17 messages available to user in a suitable way.
19 Requests can be divided into three categories: "get" (retrieving information),
20 "set" (setting parameters) and "action" (invoking an action).
22 All "set" and "action" type requests require admin privileges
23 (``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for
24 anyone but there are exceptions (where the response contains sensitive
25 information). In some cases, the request as such is allowed for anyone but
26 unprivileged users have attributes with sensitive information (e.g.
27 wake-on-lan password) omitted.
33 Attributes which represent a boolean value usually use NLA_U8 type so that we
34 can distinguish three states: "on", "off" and "not present" (meaning the
35 information is not available in "get" requests or value is not to be changed
36 in "set" requests). For these attributes, the "true" value should be passed as
37 number 1 but any non-zero value should be understood as "true" by recipient.
38 In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way.
40 In the message structure descriptions below, if an attribute name is suffixed
41 with "+", parent nest can contain multiple attributes of the same type. This
42 implements an array of entries.
44 Attributes that need to be filled-in by device drivers and that are dumped to
45 user space based on whether they are valid or not should not use zero as a
46 valid value. This avoids the need to explicitly signal the validity of the
47 attribute in the device driver API.
53 Each request or reply message contains a nested attribute with common header.
54 Structure of this header is
56 ============================== ====== =============================
57 ``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex
58 ``ETHTOOL_A_HEADER_DEV_NAME`` string device name
59 ``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests
60 ============================== ====== =============================
62 ``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
63 device message relates to. One of them is sufficient in requests, if both are
64 used, they must identify the same device. Some requests, e.g. global string
65 sets, do not require device identification. Most ``GET`` requests also allow
66 dump requests without device identification to query the same information for
67 all devices providing it (each device in a separate message).
69 ``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request
70 types. The interpretation of these flags is the same for all request types but
71 the flags may not apply to requests. Recognized flags are:
73 ================================= ===================================
74 ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply
75 ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT)
76 ``ETHTOOL_FLAG_STATS`` include optional device statistics
77 ================================= ===================================
79 New request flags should follow the general idea that if the flag is not set,
80 the behaviour is backward compatible, i.e. requests from old clients not aware
81 of the flag should be interpreted the way the client expects. A client must
82 not set flags it does not understand.
88 For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32``
89 type is used. For arbitrary length bitmaps, ethtool netlink uses a nested
90 attribute with contents of one of two forms: compact (two binary bitmaps
91 representing bit values and mask of affected bits) and bit-by-bit (list of
92 bits identified by either index or name).
94 Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together
95 with their values which saves a round trip (when the bitset is passed in a
96 request) or at least a second request (when the bitset is in a reply). This is
97 useful for one shot applications like traditional ethtool command. On the
98 other hand, long running applications like ethtool monitor (displaying
99 notifications) or network management daemons may prefer fetching the names
100 only once and using compact form to save message size. Notifications from
101 ethtool netlink interface always use compact form for bitsets.
103 A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK``
104 not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests
105 modifying a bitmap, the former changes the bit set in mask to values set in
106 value and preserves the rest; the latter sets the bits set in the bitmap and
109 Compact form: nested (bitset) atrribute contents:
111 ============================ ====== ============================
112 ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list
113 ``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits
114 ``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values
115 ``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits
116 ============================ ====== ============================
118 Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits
119 rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte
120 order, words ordered from least significant to most significant (i.e. the same
121 way as bitmaps are passed with ioctl interface).
123 For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are
124 mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if
125 ``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair);
126 if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not
127 allowed (bitset represents a single bitmap.
129 Kernel bit set length may differ from userspace length if older application is
130 used on newer kernel or vice versa. If userspace bitmap is longer, an error is
131 issued only if the request actually tries to set values of some bits not
132 recognized by kernel.
134 Bit-by-bit form: nested (bitset) attribute contents:
136 +------------------------------------+--------+-----------------------------+
137 | ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list |
138 +------------------------------------+--------+-----------------------------+
139 | ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits |
140 +------------------------------------+--------+-----------------------------+
141 | ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits |
142 +-+----------------------------------+--------+-----------------------------+
143 | | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit |
144 +-+-+--------------------------------+--------+-----------------------------+
145 | | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) |
146 +-+-+--------------------------------+--------+-----------------------------+
147 | | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name |
148 +-+-+--------------------------------+--------+-----------------------------+
149 | | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set |
150 +-+-+--------------------------------+--------+-----------------------------+
152 Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can
153 only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an
154 arbitrary number of them. A bit may be identified by its index or by its
155 name. When used in requests, listed bits are set to 0 or 1 according to
156 ``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if
157 index exceeds kernel bit length or if name is not recognized.
159 When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as
160 a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in
161 such case. Such bitset represents a bitmap with listed bits set and the rest
164 In requests, application can use either form. Form used by kernel in reply is
165 determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request
166 header. Semantics of value and mask depends on the attribute.
169 List of message types
170 =====================
172 All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix
173 according to message purpose:
175 ============== ======================================
176 ``_GET`` userspace request to retrieve data
177 ``_SET`` userspace request to set data
178 ``_ACT`` userspace request to perform an action
179 ``_GET_REPLY`` kernel reply to a ``GET`` request
180 ``_SET_REPLY`` kernel reply to a ``SET`` request
181 ``_ACT_REPLY`` kernel reply to an ``ACT`` request
182 ``_NTF`` kernel notification
183 ============== ======================================
187 ===================================== =================================
188 ``ETHTOOL_MSG_STRSET_GET`` get string set
189 ``ETHTOOL_MSG_LINKINFO_GET`` get link settings
190 ``ETHTOOL_MSG_LINKINFO_SET`` set link settings
191 ``ETHTOOL_MSG_LINKMODES_GET`` get link modes info
192 ``ETHTOOL_MSG_LINKMODES_SET`` set link modes info
193 ``ETHTOOL_MSG_LINKSTATE_GET`` get link state
194 ``ETHTOOL_MSG_DEBUG_GET`` get debugging settings
195 ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings
196 ``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings
197 ``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings
198 ``ETHTOOL_MSG_FEATURES_GET`` get device features
199 ``ETHTOOL_MSG_FEATURES_SET`` set device features
200 ``ETHTOOL_MSG_PRIVFLAGS_GET`` get private flags
201 ``ETHTOOL_MSG_PRIVFLAGS_SET`` set private flags
202 ``ETHTOOL_MSG_RINGS_GET`` get ring sizes
203 ``ETHTOOL_MSG_RINGS_SET`` set ring sizes
204 ``ETHTOOL_MSG_CHANNELS_GET`` get channel counts
205 ``ETHTOOL_MSG_CHANNELS_SET`` set channel counts
206 ``ETHTOOL_MSG_COALESCE_GET`` get coalescing parameters
207 ``ETHTOOL_MSG_COALESCE_SET`` set coalescing parameters
208 ``ETHTOOL_MSG_PAUSE_GET`` get pause parameters
209 ``ETHTOOL_MSG_PAUSE_SET`` set pause parameters
210 ``ETHTOOL_MSG_EEE_GET`` get EEE settings
211 ``ETHTOOL_MSG_EEE_SET`` set EEE settings
212 ``ETHTOOL_MSG_TSINFO_GET`` get timestamping info
213 ``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test
214 ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test
215 ``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info
216 ``ETHTOOL_MSG_FEC_GET`` get FEC settings
217 ``ETHTOOL_MSG_FEC_SET`` set FEC settings
218 ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM
219 ``ETHTOOL_MSG_STATS_GET`` get standard statistics
220 ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info
221 ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters
222 ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters
223 ===================================== =================================
227 ======================================== =================================
228 ``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents
229 ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings
230 ``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification
231 ``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info
232 ``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification
233 ``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info
234 ``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings
235 ``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification
236 ``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings
237 ``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification
238 ``ETHTOOL_MSG_FEATURES_GET_REPLY`` device features
239 ``ETHTOOL_MSG_FEATURES_SET_REPLY`` optional reply to FEATURES_SET
240 ``ETHTOOL_MSG_FEATURES_NTF`` netdev features notification
241 ``ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`` private flags
242 ``ETHTOOL_MSG_PRIVFLAGS_NTF`` private flags
243 ``ETHTOOL_MSG_RINGS_GET_REPLY`` ring sizes
244 ``ETHTOOL_MSG_RINGS_NTF`` ring sizes
245 ``ETHTOOL_MSG_CHANNELS_GET_REPLY`` channel counts
246 ``ETHTOOL_MSG_CHANNELS_NTF`` channel counts
247 ``ETHTOOL_MSG_COALESCE_GET_REPLY`` coalescing parameters
248 ``ETHTOOL_MSG_COALESCE_NTF`` coalescing parameters
249 ``ETHTOOL_MSG_PAUSE_GET_REPLY`` pause parameters
250 ``ETHTOOL_MSG_PAUSE_NTF`` pause parameters
251 ``ETHTOOL_MSG_EEE_GET_REPLY`` EEE settings
252 ``ETHTOOL_MSG_EEE_NTF`` EEE settings
253 ``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info
254 ``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results
255 ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results
256 ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info
257 ``ETHTOOL_MSG_FEC_GET_REPLY`` FEC settings
258 ``ETHTOOL_MSG_FEC_NTF`` FEC settings
259 ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM
260 ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics
261 ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info
262 ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters
263 ======================================== =================================
265 ``GET`` requests are sent by userspace applications to retrieve device
266 information. They usually do not contain any message specific attributes.
267 Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET``
268 request with ``NLM_F_DUMP`` and no device identification can be used to query
269 the information for all devices supporting the request.
271 If the data can be also modified, corresponding ``SET`` message with the same
272 layout as corresponding ``GET_REPLY`` is used to request changes. Only
273 attributes where a change is requested are included in such request (also, not
274 all attributes may be changed). Replies to most ``SET`` request consist only
275 of error code and extack; if kernel provides additional data, it is sent in
276 the form of corresponding ``SET_REPLY`` message which can be suppressed by
277 setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header.
279 Data modification also triggers sending a ``NTF`` message with a notification.
280 These usually bear only a subset of attributes which was affected by the
281 change. The same notification is issued if the data is modified using other
282 means (mostly ioctl ethtool interface). Unlike notifications from ethtool
283 netlink code which are only sent if something actually changed, notifications
284 triggered by ioctl interface may be sent even if the request did not actually
287 ``ACT`` messages request kernel (driver) to perform a specific action. If some
288 information is reported by kernel (which can be suppressed by setting
289 ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of
290 an ``ACT_REPLY`` message. Performing an action also triggers a notification
293 Later sections describe the format and semantics of these messages.
299 Requests contents of a string set as provided by ioctl commands
300 ``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user
301 writeable so that the corresponding ``STRSET_SET`` message is only used in
302 kernel replies. There are two types of string sets: global (independent of
303 a device, e.g. device feature names) and device specific (e.g. device private
308 +---------------------------------------+--------+------------------------+
309 | ``ETHTOOL_A_STRSET_HEADER`` | nested | request header |
310 +---------------------------------------+--------+------------------------+
311 | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request |
312 +-+-------------------------------------+--------+------------------------+
313 | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set |
314 +-+-+-----------------------------------+--------+------------------------+
315 | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id |
316 +-+-+-----------------------------------+--------+------------------------+
318 Kernel response contents:
320 +---------------------------------------+--------+-----------------------+
321 | ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header |
322 +---------------------------------------+--------+-----------------------+
323 | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets |
324 +-+-------------------------------------+--------+-----------------------+
325 | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set |
326 +-+-+-----------------------------------+--------+-----------------------+
327 | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id |
328 +-+-+-----------------------------------+--------+-----------------------+
329 | | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings |
330 +-+-+-----------------------------------+--------+-----------------------+
331 | | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings |
332 +-+-+-+---------------------------------+--------+-----------------------+
333 | | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string |
334 +-+-+-+-+-------------------------------+--------+-----------------------+
335 | | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index |
336 +-+-+-+-+-------------------------------+--------+-----------------------+
337 | | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value |
338 +-+-+-+-+-------------------------------+--------+-----------------------+
339 | ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts |
340 +---------------------------------------+--------+-----------------------+
342 Device identification in request header is optional. Depending on its presence
343 a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests:
345 - no ``NLM_F_DUMP,`` no device: get "global" stringsets
346 - no ``NLM_F_DUMP``, with device: get string sets related to the device
347 - ``NLM_F_DUMP``, no device: get device related string sets for all devices
349 If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of
350 requested type are returned, otherwise only those specified in the request.
351 Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string
352 counts of the sets, not the actual strings.
358 Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for
359 link modes and autonegotiation related information. The request does not use
364 ==================================== ====== ==========================
365 ``ETHTOOL_A_LINKINFO_HEADER`` nested request header
366 ==================================== ====== ==========================
368 Kernel response contents:
370 ==================================== ====== ==========================
371 ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header
372 ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
373 ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
374 ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status
375 ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
376 ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver
377 ==================================== ====== ==========================
379 Attributes and their values have the same meaning as matching members of the
380 corresponding ioctl structures.
382 ``LINKINFO_GET`` allows dump requests (kernel returns reply message for all
383 devices supporting the request).
389 ``LINKINFO_SET`` request allows setting some of the attributes reported by
394 ==================================== ====== ==========================
395 ``ETHTOOL_A_LINKINFO_HEADER`` nested request header
396 ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
397 ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
398 ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
399 ==================================== ====== ==========================
401 MDI(-X) status and transceiver cannot be set, request with the corresponding
402 attributes is rejected.
408 Requests link modes (supported, advertised and peer advertised) and related
409 information (autonegotiation status, link speed and duplex) as provided by
410 ``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes.
414 ==================================== ====== ==========================
415 ``ETHTOOL_A_LINKMODES_HEADER`` nested request header
416 ==================================== ====== ==========================
418 Kernel response contents:
420 ========================================== ====== ==========================
421 ``ETHTOOL_A_LINKMODES_HEADER`` nested reply header
422 ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status
423 ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes
424 ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
425 ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
426 ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
427 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
428 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state
429 ========================================== ====== ==========================
431 For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask
432 represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit
435 ``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all
436 devices supporting the request).
444 ========================================== ====== ==========================
445 ``ETHTOOL_A_LINKMODES_HEADER`` nested request header
446 ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status
447 ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes
448 ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
449 ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
450 ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
451 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
452 ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes
453 ========================================== ====== ==========================
455 ``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If
456 autonegotiation is on (either set now or kept from before), advertised modes
457 are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one
458 of speed, duplex and lanes is specified, kernel adjusts advertised modes to all
459 supported modes matching speed, duplex, lanes or all (whatever is specified).
460 This autoselection is done on ethtool side with ioctl interface, netlink
461 interface is supposed to allow requesting changes without knowing what exactly
468 Requests link state information. Link up/down flag (as provided by
469 ``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might
470 be provided as well. In general, extended state describes reasons for why a port
471 is down, or why it operates in some non-obvious mode. This request does not have
476 ==================================== ====== ==========================
477 ``ETHTOOL_A_LINKSTATE_HEADER`` nested request header
478 ==================================== ====== ==========================
480 Kernel response contents:
482 ==================================== ====== ============================
483 ``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header
484 ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down)
485 ``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index
486 ``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value
487 ``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state
488 ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate
489 ==================================== ====== ============================
491 For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns
492 carrier flag provided by ``netif_carrier_ok()`` but there are drivers which
493 define their own handler.
495 ``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are
496 optional values. ethtool core can provide either both
497 ``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``,
498 or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them.
500 ``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all
501 devices supporting the request).
504 Link extended states:
506 ================================================ ============================================
507 ``ETHTOOL_LINK_EXT_STATE_AUTONEG`` States relating to the autonegotiation or
510 ``ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`` Failure during link training
512 ``ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`` Logical mismatch in physical coding sublayer
513 or forward error correction sublayer
515 ``ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`` Signal integrity issues
517 ``ETHTOOL_LINK_EXT_STATE_NO_CABLE`` No cable connected
519 ``ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`` Failure is related to cable,
520 e.g., unsupported cable
522 ``ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`` Failure is related to EEPROM, e.g., failure
523 during reading or parsing the data
525 ``ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`` Failure during calibration algorithm
527 ``ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`` The hardware is not able to provide the
528 power required from cable or module
530 ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated
532 ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue
533 ================================================ ============================================
535 Link extended substates:
539 =============================================================== ================================
540 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`` Peer side is down
542 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`` Ack not received from peer side
544 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`` Next page exchange failed
546 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`` Peer side is down during force
547 mode or there is no agreement of
550 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`` Forward error correction modes
551 in both sides are mismatched
553 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`` No Highest Common Denominator
554 =============================================================== ================================
556 Link training substates:
558 =========================================================================== ====================
559 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`` Frames were not
563 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`` The lock did not
567 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`` Peer side did not
572 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`` Remote side is not
574 =========================================================================== ====================
576 Link logical mismatch substates:
578 ================================================================ ===============================
579 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`` Physical coding sublayer was
580 not locked in first phase -
583 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`` Physical coding sublayer was
584 not locked in second phase -
585 alignment markers lock
587 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`` Physical coding sublayer did
590 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`` FC forward error correction is
593 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`` RS forward error correction is
595 ================================================================ ===============================
597 Bad signal integrity substates:
599 ================================================================= =============================
600 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`` Large number of physical
603 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`` The system attempted to
604 operate the cable at a rate
606 supported, which led to
607 signal integrity issues
609 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`` The external clock signal for
610 SerDes is too weak or
613 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`` The received signal for
614 SerDes is too weak because
615 analog loss of signal.
616 ================================================================= =============================
618 Cable issue substates:
620 =================================================== ============================================
621 ``ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`` Unsupported cable
623 ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure
624 =================================================== ============================================
626 Transceiver module issue substates:
628 =================================================== ============================================
629 ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach
630 the ModuleReady state. For example, if the
631 module is stuck at ModuleFault state
632 =================================================== ============================================
637 Requests debugging settings of a device. At the moment, only message mask is
642 ==================================== ====== ==========================
643 ``ETHTOOL_A_DEBUG_HEADER`` nested request header
644 ==================================== ====== ==========================
646 Kernel response contents:
648 ==================================== ====== ==========================
649 ``ETHTOOL_A_DEBUG_HEADER`` nested reply header
650 ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
651 ==================================== ====== ==========================
653 The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as
654 provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl
655 interface. While it is called message level there for historical reasons, most
656 drivers and almost all newer drivers use it as a mask of enabled message
657 classes (represented by ``NETIF_MSG_*`` constants); therefore netlink
658 interface follows its actual use in practice.
660 ``DEBUG_GET`` allows dump requests (kernel returns reply messages for all
661 devices supporting the request).
667 Set or update debugging settings of a device. At the moment, only message mask
672 ==================================== ====== ==========================
673 ``ETHTOOL_A_DEBUG_HEADER`` nested request header
674 ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
675 ==================================== ====== ==========================
677 ``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of
678 enabled debugging message types for the device.
684 Query device wake-on-lan settings. Unlike most "GET" type requests,
685 ``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it
686 (potentially) provides SecureOn(tm) password which is confidential.
690 ==================================== ====== ==========================
691 ``ETHTOOL_A_WOL_HEADER`` nested request header
692 ==================================== ====== ==========================
694 Kernel response contents:
696 ==================================== ====== ==========================
697 ``ETHTOOL_A_WOL_HEADER`` nested reply header
698 ``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes
699 ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password
700 ==================================== ====== ==========================
702 In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the
703 device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only
704 included in reply if ``WAKE_MAGICSECURE`` mode is supported.
710 Set or update wake-on-lan settings.
714 ==================================== ====== ==========================
715 ``ETHTOOL_A_WOL_HEADER`` nested request header
716 ``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes
717 ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password
718 ==================================== ====== ==========================
720 ``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting
721 ``WAKE_MAGICSECURE`` mode.
727 Gets netdev features like ``ETHTOOL_GFEATURES`` ioctl request.
731 ==================================== ====== ==========================
732 ``ETHTOOL_A_FEATURES_HEADER`` nested request header
733 ==================================== ====== ==========================
735 Kernel response contents:
737 ==================================== ====== ==========================
738 ``ETHTOOL_A_FEATURES_HEADER`` nested reply header
739 ``ETHTOOL_A_FEATURES_HW`` bitset dev->hw_features
740 ``ETHTOOL_A_FEATURES_WANTED`` bitset dev->wanted_features
741 ``ETHTOOL_A_FEATURES_ACTIVE`` bitset dev->features
742 ``ETHTOOL_A_FEATURES_NOCHANGE`` bitset NETIF_F_NEVER_CHANGE
743 ==================================== ====== ==========================
745 Bitmaps in kernel response have the same meaning as bitmaps used in ioctl
746 interference but attribute names are different (they are based on
747 corresponding members of struct net_device). Legacy "flags" are not provided,
748 if userspace needs them (most likely only ethtool for backward compatibility),
749 it can calculate their values from related feature bits itself.
750 ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to
751 provide all names when using verbose bitmap format), the other three use no
752 mask (simple bit lists).
758 Request to set netdev features like ``ETHTOOL_SFEATURES`` ioctl request.
762 ==================================== ====== ==========================
763 ``ETHTOOL_A_FEATURES_HEADER`` nested request header
764 ``ETHTOOL_A_FEATURES_WANTED`` bitset requested features
765 ==================================== ====== ==========================
767 Kernel response contents:
769 ==================================== ====== ==========================
770 ``ETHTOOL_A_FEATURES_HEADER`` nested reply header
771 ``ETHTOOL_A_FEATURES_WANTED`` bitset diff wanted vs. result
772 ``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active
773 ==================================== ====== ==========================
775 Request constains only one bitset which can be either value/mask pair (request
776 to change specific feature bits and leave the rest) or only a value (request
777 to set all features to specified set).
779 As request is subject to netdev_change_features() sanity checks, optional
780 kernel reply (can be suppressed by ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request
781 header) informs client about the actual result. ``ETHTOOL_A_FEATURES_WANTED``
782 reports the difference between client request and actual result: mask consists
783 of bits which differ between requested features and result (dev->features
784 after the operation), value consists of values of these bits in the request
785 (i.e. negated values from resulting features). ``ETHTOOL_A_FEATURES_ACTIVE``
786 reports the difference between old and new dev->features: mask consists of
787 bits which have changed, values are their values in new dev->features (after
790 ``ETHTOOL_MSG_FEATURES_NTF`` notification is sent not only if device features
791 are modified using ``ETHTOOL_MSG_FEATURES_SET`` request or on of ethtool ioctl
792 request but also each time features are modified with netdev_update_features()
793 or netdev_change_features().
799 Gets private flags like ``ETHTOOL_GPFLAGS`` ioctl request.
803 ==================================== ====== ==========================
804 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header
805 ==================================== ====== ==========================
807 Kernel response contents:
809 ==================================== ====== ==========================
810 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested reply header
811 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags
812 ==================================== ====== ==========================
814 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` is a bitset with values of device private flags.
815 These flags are defined by driver, their number and names (and also meaning)
816 are device dependent. For compact bitset format, names can be retrieved as
817 ``ETH_SS_PRIV_FLAGS`` string set. If verbose bitset format is requested,
818 response uses all private flags supported by the device as mask so that client
819 gets the full information without having to fetch the string set with names.
825 Sets or modifies values of device private flags like ``ETHTOOL_SPFLAGS``
830 ==================================== ====== ==========================
831 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header
832 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags
833 ==================================== ====== ==========================
835 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` can either set the whole set of private flags or
836 modify only values of some of them.
842 Gets ring sizes like ``ETHTOOL_GRINGPARAM`` ioctl request.
846 ==================================== ====== ==========================
847 ``ETHTOOL_A_RINGS_HEADER`` nested request header
848 ==================================== ====== ==========================
850 Kernel response contents:
852 ==================================== ====== ===========================
853 ``ETHTOOL_A_RINGS_HEADER`` nested reply header
854 ``ETHTOOL_A_RINGS_RX_MAX`` u32 max size of RX ring
855 ``ETHTOOL_A_RINGS_RX_MINI_MAX`` u32 max size of RX mini ring
856 ``ETHTOOL_A_RINGS_RX_JUMBO_MAX`` u32 max size of RX jumbo ring
857 ``ETHTOOL_A_RINGS_TX_MAX`` u32 max size of TX ring
858 ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring
859 ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring
860 ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring
861 ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
862 ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
863 ==================================== ====== ===========================
869 Sets ring sizes like ``ETHTOOL_SRINGPARAM`` ioctl request.
873 ==================================== ====== ===========================
874 ``ETHTOOL_A_RINGS_HEADER`` nested reply header
875 ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring
876 ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring
877 ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring
878 ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
879 ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
880 ==================================== ====== ===========================
882 Kernel checks that requested ring sizes do not exceed limits reported by
883 driver. Driver may impose additional constraints and may not suspport all
890 Gets channel counts like ``ETHTOOL_GCHANNELS`` ioctl request.
894 ==================================== ====== ==========================
895 ``ETHTOOL_A_CHANNELS_HEADER`` nested request header
896 ==================================== ====== ==========================
898 Kernel response contents:
900 ===================================== ====== ==========================
901 ``ETHTOOL_A_CHANNELS_HEADER`` nested reply header
902 ``ETHTOOL_A_CHANNELS_RX_MAX`` u32 max receive channels
903 ``ETHTOOL_A_CHANNELS_TX_MAX`` u32 max transmit channels
904 ``ETHTOOL_A_CHANNELS_OTHER_MAX`` u32 max other channels
905 ``ETHTOOL_A_CHANNELS_COMBINED_MAX`` u32 max combined channels
906 ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count
907 ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count
908 ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count
909 ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count
910 ===================================== ====== ==========================
916 Sets channel counts like ``ETHTOOL_SCHANNELS`` ioctl request.
920 ===================================== ====== ==========================
921 ``ETHTOOL_A_CHANNELS_HEADER`` nested request header
922 ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count
923 ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count
924 ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count
925 ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count
926 ===================================== ====== ==========================
928 Kernel checks that requested channel counts do not exceed limits reported by
929 driver. Driver may impose additional constraints and may not suspport all
936 Gets coalescing parameters like ``ETHTOOL_GCOALESCE`` ioctl request.
940 ==================================== ====== ==========================
941 ``ETHTOOL_A_COALESCE_HEADER`` nested request header
942 ==================================== ====== ==========================
944 Kernel response contents:
946 =========================================== ====== =======================
947 ``ETHTOOL_A_COALESCE_HEADER`` nested reply header
948 ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx
949 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx
950 ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ
951 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ
952 ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx
953 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx
954 ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ
955 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ
956 ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update
957 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce
958 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce
959 ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate
960 ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx
961 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx
962 ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx
963 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx
964 ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate
965 ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx
966 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx
967 ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
968 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
969 ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
970 ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
971 ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
972 =========================================== ====== =======================
974 Attributes are only included in reply if their value is not zero or the
975 corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e.
976 they are declared as supported by driver).
978 Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and
979 ``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet
980 arrival and the various time based delay parameters. By default timers are
981 expected to limit the max delay between any packet arrival/departure and a
982 corresponding interrupt. In this mode timer should be started by packet
983 arrival (sometimes delivery of previous interrupt) and reset when interrupt
985 Setting the appropriate attribute to 1 will enable ``CQE`` mode, where
986 each packet event resets the timer. In this mode timer is used to force
987 the interrupt if queue goes idle, while busy queues depend on the packet
988 limit to trigger interrupts.
993 Sets coalescing parameters like ``ETHTOOL_SCOALESCE`` ioctl request.
997 =========================================== ====== =======================
998 ``ETHTOOL_A_COALESCE_HEADER`` nested request header
999 ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx
1000 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx
1001 ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ
1002 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ
1003 ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx
1004 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx
1005 ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ
1006 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ
1007 ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update
1008 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce
1009 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce
1010 ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate
1011 ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx
1012 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx
1013 ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx
1014 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx
1015 ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate
1016 ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx
1017 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx
1018 ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
1019 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
1020 ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
1021 ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
1022 ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
1023 =========================================== ====== =======================
1025 Request is rejected if it attributes declared as unsupported by driver (i.e.
1026 such that the corresponding bit in ``ethtool_ops::supported_coalesce_params``
1027 is not set), regardless of their values. Driver may impose additional
1028 constraints on coalescing parameters and their values.
1034 Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
1038 ===================================== ====== ==========================
1039 ``ETHTOOL_A_PAUSE_HEADER`` nested request header
1040 ===================================== ====== ==========================
1042 Kernel response contents:
1044 ===================================== ====== ==========================
1045 ``ETHTOOL_A_PAUSE_HEADER`` nested request header
1046 ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation
1047 ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames
1048 ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames
1049 ``ETHTOOL_A_PAUSE_STATS`` nested pause statistics
1050 ===================================== ====== ==========================
1052 ``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set
1053 in ``ETHTOOL_A_HEADER_FLAGS``.
1054 It will be empty if driver did not report any statistics. Drivers fill in
1055 the statistics in the following structure:
1057 .. kernel-doc:: include/linux/ethtool.h
1058 :identifiers: ethtool_pause_stats
1060 Each member has a corresponding attribute defined.
1065 Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
1069 ===================================== ====== ==========================
1070 ``ETHTOOL_A_PAUSE_HEADER`` nested request header
1071 ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation
1072 ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames
1073 ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames
1074 ===================================== ====== ==========================
1080 Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request.
1084 ===================================== ====== ==========================
1085 ``ETHTOOL_A_EEE_HEADER`` nested request header
1086 ===================================== ====== ==========================
1088 Kernel response contents:
1090 ===================================== ====== ==========================
1091 ``ETHTOOL_A_EEE_HEADER`` nested request header
1092 ``ETHTOOL_A_EEE_MODES_OURS`` bool supported/advertised modes
1093 ``ETHTOOL_A_EEE_MODES_PEER`` bool peer advertised link modes
1094 ``ETHTOOL_A_EEE_ACTIVE`` bool EEE is actively used
1095 ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled
1096 ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled
1097 ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us)
1098 ===================================== ====== ==========================
1100 In ``ETHTOOL_A_EEE_MODES_OURS``, mask consists of link modes for which EEE is
1101 enabled, value of link modes for which EEE is advertised. Link modes for which
1102 peer advertises EEE are listed in ``ETHTOOL_A_EEE_MODES_PEER`` (no mask). The
1103 netlink interface allows reporting EEE status for all link modes but only
1104 first 32 are provided by the ``ethtool_ops`` callback.
1110 Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request.
1114 ===================================== ====== ==========================
1115 ``ETHTOOL_A_EEE_HEADER`` nested request header
1116 ``ETHTOOL_A_EEE_MODES_OURS`` bool advertised modes
1117 ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled
1118 ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled
1119 ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us)
1120 ===================================== ====== ==========================
1122 ``ETHTOOL_A_EEE_MODES_OURS`` is used to either list link modes to advertise
1123 EEE for (if there is no mask) or specify changes to the list (if there is
1124 a mask). The netlink interface allows reporting EEE status for all link modes
1125 but only first 32 can be set at the moment as that is what the ``ethtool_ops``
1132 Gets timestamping information like ``ETHTOOL_GET_TS_INFO`` ioctl request.
1136 ===================================== ====== ==========================
1137 ``ETHTOOL_A_TSINFO_HEADER`` nested request header
1138 ===================================== ====== ==========================
1140 Kernel response contents:
1142 ===================================== ====== ==========================
1143 ``ETHTOOL_A_TSINFO_HEADER`` nested request header
1144 ``ETHTOOL_A_TSINFO_TIMESTAMPING`` bitset SO_TIMESTAMPING flags
1145 ``ETHTOOL_A_TSINFO_TX_TYPES`` bitset supported Tx types
1146 ``ETHTOOL_A_TSINFO_RX_FILTERS`` bitset supported Rx filters
1147 ``ETHTOOL_A_TSINFO_PHC_INDEX`` u32 PTP hw clock index
1148 ===================================== ====== ==========================
1150 ``ETHTOOL_A_TSINFO_PHC_INDEX`` is absent if there is no associated PHC (there
1151 is no special value for this case). The bitset attributes are omitted if they
1152 would be empty (no bit set).
1161 ==================================== ====== ==========================
1162 ``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header
1163 ==================================== ====== ==========================
1165 Notification contents:
1167 An Ethernet cable typically contains 1, 2 or 4 pairs. The length of
1168 the pair can only be measured when there is a fault in the pair and
1169 hence a reflection. Information about the fault may not be available,
1170 depending on the specific hardware. Hence the contents of the notify
1171 message are mostly optional. The attributes can be repeated an
1172 arbitrary number of times, in an arbitrary order, for an arbitrary
1175 The example shows the notification sent when the test is completed for
1176 a T2 cable, i.e. two pairs. One pair is OK and hence has no length
1177 information. The second pair has a fault and does have length
1180 +---------------------------------------------+--------+---------------------+
1181 | ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header |
1182 +---------------------------------------------+--------+---------------------+
1183 | ``ETHTOOL_A_CABLE_TEST_STATUS`` | u8 | completed |
1184 +---------------------------------------------+--------+---------------------+
1185 | ``ETHTOOL_A_CABLE_TEST_NTF_NEST`` | nested | all the results |
1186 +-+-------------------------------------------+--------+---------------------+
1187 | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test result |
1188 +-+-+-----------------------------------------+--------+---------------------+
1189 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
1190 +-+-+-----------------------------------------+--------+---------------------+
1191 | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
1192 +-+-+-----------------------------------------+--------+---------------------+
1193 | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test results |
1194 +-+-+-----------------------------------------+--------+---------------------+
1195 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
1196 +-+-+-----------------------------------------+--------+---------------------+
1197 | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
1198 +-+-+-----------------------------------------+--------+---------------------+
1199 | | ``ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`` | nested | cable length |
1200 +-+-+-----------------------------------------+--------+---------------------+
1201 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number |
1202 +-+-+-----------------------------------------+--------+---------------------+
1203 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u32 | length in cm |
1204 +-+-+-----------------------------------------+--------+---------------------+
1209 Start a cable test and report raw TDR data
1213 +--------------------------------------------+--------+-----------------------+
1214 | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header |
1215 +--------------------------------------------+--------+-----------------------+
1216 | ``ETHTOOL_A_CABLE_TEST_TDR_CFG`` | nested | test configuration |
1217 +-+------------------------------------------+--------+-----------------------+
1218 | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | first data distance |
1219 +-+-+----------------------------------------+--------+-----------------------+
1220 | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | last data distance |
1221 +-+-+----------------------------------------+--------+-----------------------+
1222 | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step |
1223 +-+-+----------------------------------------+--------+-----------------------+
1224 | | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`` | u8 | pair to test |
1225 +-+-+----------------------------------------+--------+-----------------------+
1227 The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members
1228 of the nest. All distances are expressed in centimeters. The PHY takes
1229 the distances as a guide, and rounds to the nearest distance it
1230 actually supports. If a pair is passed, only that one pair will be
1231 tested. Otherwise all pairs are tested.
1233 Notification contents:
1235 Raw TDR data is gathered by sending a pulse down the cable and
1236 recording the amplitude of the reflected pulse for a given distance.
1238 It can take a number of seconds to collect TDR data, especial if the
1239 full 100 meters is probed at 1 meter intervals. When the test is
1240 started a notification will be sent containing just
1241 ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
1242 ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED.
1244 When the test has completed a second notification will be sent
1245 containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
1246 ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data.
1248 The message may optionally contain the amplitude of the pulse send
1249 down the cable. This is measured in mV. A reflection should not be
1250 bigger than transmitted pulse.
1252 Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP
1253 nest containing information about the distance along the cable for the
1254 first reading, the last reading, and the step between each
1255 reading. Distances are measured in centimeters. These should be the
1256 exact values the PHY used. These may be different to what the user
1257 requested, if the native measurement resolution is greater than 1 cm.
1259 For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is
1260 used to report the amplitude of the reflection for a given pair.
1262 +---------------------------------------------+--------+----------------------+
1263 | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header |
1264 +---------------------------------------------+--------+----------------------+
1265 | ``ETHTOOL_A_CABLE_TEST_TDR_STATUS`` | u8 | completed |
1266 +---------------------------------------------+--------+----------------------+
1267 | ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST`` | nested | all the results |
1268 +-+-------------------------------------------+--------+----------------------+
1269 | | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE`` | nested | TX Pulse amplitude |
1270 +-+-+-----------------------------------------+--------+----------------------+
1271 | | | ``ETHTOOL_A_CABLE_PULSE_mV`` | s16 | Pulse amplitude |
1272 +-+-+-----------------------------------------+--------+----------------------+
1273 | | ``ETHTOOL_A_CABLE_NEST_STEP`` | nested | TDR step info |
1274 +-+-+-----------------------------------------+--------+----------------------+
1275 | | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | First data distance |
1276 +-+-+-----------------------------------------+--------+----------------------+
1277 | | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | Last data distance |
1278 +-+-+-----------------------------------------+--------+----------------------+
1279 | | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step|
1280 +-+-+-----------------------------------------+--------+----------------------+
1281 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
1282 +-+-+-----------------------------------------+--------+----------------------+
1283 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
1284 +-+-+-----------------------------------------+--------+----------------------+
1285 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
1286 +-+-+-----------------------------------------+--------+----------------------+
1287 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
1288 +-+-+-----------------------------------------+--------+----------------------+
1289 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
1290 +-+-+-----------------------------------------+--------+----------------------+
1291 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
1292 +-+-+-----------------------------------------+--------+----------------------+
1293 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
1294 +-+-+-----------------------------------------+--------+----------------------+
1295 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
1296 +-+-+-----------------------------------------+--------+----------------------+
1297 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
1298 +-+-+-----------------------------------------+--------+----------------------+
1303 Gets information about the tunnel state NIC is aware of.
1307 ===================================== ====== ==========================
1308 ``ETHTOOL_A_TUNNEL_INFO_HEADER`` nested request header
1309 ===================================== ====== ==========================
1311 Kernel response contents:
1313 +---------------------------------------------+--------+---------------------+
1314 | ``ETHTOOL_A_TUNNEL_INFO_HEADER`` | nested | reply header |
1315 +---------------------------------------------+--------+---------------------+
1316 | ``ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`` | nested | all UDP port tables |
1317 +-+-------------------------------------------+--------+---------------------+
1318 | | ``ETHTOOL_A_TUNNEL_UDP_TABLE`` | nested | one UDP port table |
1319 +-+-+-----------------------------------------+--------+---------------------+
1320 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`` | u32 | max size of the |
1322 +-+-+-----------------------------------------+--------+---------------------+
1323 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` | bitset | tunnel types which |
1324 | | | | | table can hold |
1325 +-+-+-----------------------------------------+--------+---------------------+
1326 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`` | nested | offloaded UDP port |
1327 +-+-+-+---------------------------------------+--------+---------------------+
1328 | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`` | be16 | UDP port |
1329 +-+-+-+---------------------------------------+--------+---------------------+
1330 | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`` | u32 | tunnel type |
1331 +-+-+-+---------------------------------------+--------+---------------------+
1333 For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that
1334 the table contains static entries, hard-coded by the NIC.
1339 Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request.
1343 ===================================== ====== ==========================
1344 ``ETHTOOL_A_FEC_HEADER`` nested request header
1345 ===================================== ====== ==========================
1347 Kernel response contents:
1349 ===================================== ====== ==========================
1350 ``ETHTOOL_A_FEC_HEADER`` nested request header
1351 ``ETHTOOL_A_FEC_MODES`` bitset configured modes
1352 ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection
1353 ``ETHTOOL_A_FEC_ACTIVE`` u32 index of active FEC mode
1354 ``ETHTOOL_A_FEC_STATS`` nested FEC statistics
1355 ===================================== ====== ==========================
1357 ``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently
1358 active on the interface. This attribute may not be present if device does
1361 ``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when
1362 autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will
1363 select the FEC mode automatically based on the parameters of the SFP module.
1364 This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface.
1365 ``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode
1366 bits (rather than old ``ETHTOOL_FEC_*`` bits).
1368 ``ETHTOOL_A_FEC_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in
1369 ``ETHTOOL_A_HEADER_FLAGS``.
1370 Each attribute carries an array of 64bit statistics. First entry in the array
1371 contains the total number of events on the port, while the following entries
1372 are counters corresponding to lanes/PCS instances. The number of entries in
1375 +--------------+---------------------------------------------+
1376 | `0` | device does not support FEC statistics |
1377 +--------------+---------------------------------------------+
1378 | `1` | device does not support per-lane break down |
1379 +--------------+---------------------------------------------+
1380 | `1 + #lanes` | device has full support for FEC stats |
1381 +--------------+---------------------------------------------+
1383 Drivers fill in the statistics in the following structure:
1385 .. kernel-doc:: include/linux/ethtool.h
1386 :identifiers: ethtool_fec_stats
1391 Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request.
1395 ===================================== ====== ==========================
1396 ``ETHTOOL_A_FEC_HEADER`` nested request header
1397 ``ETHTOOL_A_FEC_MODES`` bitset configured modes
1398 ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection
1399 ===================================== ====== ==========================
1401 ``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise
1402 FEC mode is selected as part of autonegotiation.
1404 ``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended
1405 to set only one bit, if multiple bits are set driver may choose between them
1406 in an implementation specific way.
1408 ``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP
1409 module parameters. This does not mean autonegotiation.
1414 Fetch module EEPROM data dump.
1415 This interface is designed to allow dumps of at most 1/2 page at once. This
1416 means only dumps of 128 (or less) bytes are allowed, without crossing half page
1417 boundary located at offset 128. For pages other than 0 only high 128 bytes are
1422 ======================================= ====== ==========================
1423 ``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header
1424 ``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page
1425 ``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read
1426 ``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number
1427 ``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number
1428 ``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address
1429 ======================================= ====== ==========================
1431 If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed.
1433 Kernel response contents:
1435 +---------------------------------------------+--------+---------------------+
1436 | ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header |
1437 +---------------------------------------------+--------+---------------------+
1438 | ``ETHTOOL_A_MODULE_EEPROM_DATA`` | binary | array of bytes from |
1439 | | | module EEPROM |
1440 +---------------------------------------------+--------+---------------------+
1442 ``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of
1443 bytes driver actually read.
1448 Get standard statistics for the interface. Note that this is not
1449 a re-implementation of ``ETHTOOL_GSTATS`` which exposed driver-defined
1454 ======================================= ====== ==========================
1455 ``ETHTOOL_A_STATS_HEADER`` nested request header
1456 ``ETHTOOL_A_STATS_GROUPS`` bitset requested groups of stats
1457 ======================================= ====== ==========================
1459 Kernel response contents:
1461 +-----------------------------------+--------+--------------------------------+
1462 | ``ETHTOOL_A_STATS_HEADER`` | nested | reply header |
1463 +-----------------------------------+--------+--------------------------------+
1464 | ``ETHTOOL_A_STATS_GRP`` | nested | one or more group of stats |
1465 +-+---------------------------------+--------+--------------------------------+
1466 | | ``ETHTOOL_A_STATS_GRP_ID`` | u32 | group ID - ``ETHTOOL_STATS_*`` |
1467 +-+---------------------------------+--------+--------------------------------+
1468 | | ``ETHTOOL_A_STATS_GRP_SS_ID`` | u32 | string set ID for names |
1469 +-+---------------------------------+--------+--------------------------------+
1470 | | ``ETHTOOL_A_STATS_GRP_STAT`` | nested | nest containing a statistic |
1471 +-+---------------------------------+--------+--------------------------------+
1472 | | ``ETHTOOL_A_STATS_GRP_HIST_RX`` | nested | histogram statistic (Rx) |
1473 +-+---------------------------------+--------+--------------------------------+
1474 | | ``ETHTOOL_A_STATS_GRP_HIST_TX`` | nested | histogram statistic (Tx) |
1475 +-+---------------------------------+--------+--------------------------------+
1477 Users specify which groups of statistics they are requesting via
1478 the ``ETHTOOL_A_STATS_GROUPS`` bitset. Currently defined values are:
1480 ====================== ======== ===============================================
1481 ETHTOOL_STATS_ETH_MAC eth-mac Basic IEEE 802.3 MAC statistics (30.3.1.1.*)
1482 ETHTOOL_STATS_ETH_PHY eth-phy Basic IEEE 802.3 PHY statistics (30.3.2.1.*)
1483 ETHTOOL_STATS_ETH_CTRL eth-ctrl Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*)
1484 ETHTOOL_STATS_RMON rmon RMON (RFC 2819) statistics
1485 ====================== ======== ===============================================
1487 Each group should have a corresponding ``ETHTOOL_A_STATS_GRP`` in the reply.
1488 ``ETHTOOL_A_STATS_GRP_ID`` identifies which group's statistics nest contains.
1489 ``ETHTOOL_A_STATS_GRP_SS_ID`` identifies the string set ID for the names of
1490 the statistics in the group, if available.
1492 Statistics are added to the ``ETHTOOL_A_STATS_GRP`` nest under
1493 ``ETHTOOL_A_STATS_GRP_STAT``. ``ETHTOOL_A_STATS_GRP_STAT`` should contain
1494 single 8 byte (u64) attribute inside - the type of that attribute is
1495 the statistic ID and the value is the value of the statistic.
1496 Each group has its own interpretation of statistic IDs.
1497 Attribute IDs correspond to strings from the string set identified
1498 by ``ETHTOOL_A_STATS_GRP_SS_ID``. Complex statistics (such as RMON histogram
1499 entries) are also listed inside ``ETHTOOL_A_STATS_GRP`` and do not have
1500 a string defined in the string set.
1502 RMON "histogram" counters count number of packets within given size range.
1503 Because RFC does not specify the ranges beyond the standard 1518 MTU devices
1504 differ in definition of buckets. For this reason the definition of packet ranges
1505 is left to each driver.
1507 ``ETHTOOL_A_STATS_GRP_HIST_RX`` and ``ETHTOOL_A_STATS_GRP_HIST_TX`` nests
1508 contain the following attributes:
1510 ================================= ====== ===================================
1511 ETHTOOL_A_STATS_RMON_HIST_BKT_LOW u32 low bound of the packet size bucket
1512 ETHTOOL_A_STATS_RMON_HIST_BKT_HI u32 high bound of the bucket
1513 ETHTOOL_A_STATS_RMON_HIST_VAL u64 packet counter
1514 ================================= ====== ===================================
1516 Low and high bounds are inclusive, for example:
1518 ============================= ==== ====
1519 RFC statistic low high
1520 ============================= ==== ====
1521 etherStatsPkts64Octets 0 64
1522 etherStatsPkts512to1023Octets 512 1023
1523 ============================= ==== ====
1528 Query device PHC virtual clocks information.
1532 ==================================== ====== ==========================
1533 ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header
1534 ==================================== ====== ==========================
1536 Kernel response contents:
1538 ==================================== ====== ==========================
1539 ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header
1540 ``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number
1541 ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array
1542 ==================================== ====== ==========================
1547 Gets transceiver module parameters.
1551 ===================================== ====== ==========================
1552 ``ETHTOOL_A_MODULE_HEADER`` nested request header
1553 ===================================== ====== ==========================
1555 Kernel response contents:
1557 ====================================== ====== ==========================
1558 ``ETHTOOL_A_MODULE_HEADER`` nested reply header
1559 ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy
1560 ``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode
1561 ====================================== ====== ==========================
1563 The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the
1564 transceiver module power mode policy enforced by the host. The default policy
1565 is driver-dependent, but "auto" is the recommended default and it should be
1566 implemented by new drivers and drivers where conformance to a legacy behavior
1569 The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational
1570 power mode policy of the transceiver module. It is only reported when a module
1571 is plugged-in. Possible values are:
1573 .. kernel-doc:: include/uapi/linux/ethtool.h
1574 :identifiers: ethtool_module_power_mode
1579 Sets transceiver module parameters.
1583 ====================================== ====== ==========================
1584 ``ETHTOOL_A_MODULE_HEADER`` nested request header
1585 ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy
1586 ====================================== ====== ==========================
1588 When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used
1589 to set the transceiver module power policy enforced by the host. Possible
1592 .. kernel-doc:: include/uapi/linux/ethtool.h
1593 :identifiers: ethtool_module_power_mode_policy
1595 For SFF-8636 modules, low power mode is forced by the host according to table
1596 6-10 in revision 2.10a of the specification.
1598 For CMIS modules, low power mode is forced by the host according to table 6-12
1599 in revision 5.0 of the specification.
1604 The following table maps ioctl commands to netlink commands providing their
1605 functionality. Entries with "n/a" in right column are commands which do not
1606 have their netlink replacement yet. Entries which "n/a" in the left column
1609 =================================== =====================================
1610 ioctl command netlink command
1611 =================================== =====================================
1612 ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET``
1613 ``ETHTOOL_MSG_LINKMODES_GET``
1614 ``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET``
1615 ``ETHTOOL_MSG_LINKMODES_SET``
1616 ``ETHTOOL_GDRVINFO`` n/a
1617 ``ETHTOOL_GREGS`` n/a
1618 ``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET``
1619 ``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET``
1620 ``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET``
1621 ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET``
1622 ``ETHTOOL_NWAY_RST`` n/a
1623 ``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET``
1624 ``ETHTOOL_GEEPROM`` n/a
1625 ``ETHTOOL_SEEPROM`` n/a
1626 ``ETHTOOL_GCOALESCE`` ``ETHTOOL_MSG_COALESCE_GET``
1627 ``ETHTOOL_SCOALESCE`` ``ETHTOOL_MSG_COALESCE_SET``
1628 ``ETHTOOL_GRINGPARAM`` ``ETHTOOL_MSG_RINGS_GET``
1629 ``ETHTOOL_SRINGPARAM`` ``ETHTOOL_MSG_RINGS_SET``
1630 ``ETHTOOL_GPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_GET``
1631 ``ETHTOOL_SPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_SET``
1632 ``ETHTOOL_GRXCSUM`` ``ETHTOOL_MSG_FEATURES_GET``
1633 ``ETHTOOL_SRXCSUM`` ``ETHTOOL_MSG_FEATURES_SET``
1634 ``ETHTOOL_GTXCSUM`` ``ETHTOOL_MSG_FEATURES_GET``
1635 ``ETHTOOL_STXCSUM`` ``ETHTOOL_MSG_FEATURES_SET``
1636 ``ETHTOOL_GSG`` ``ETHTOOL_MSG_FEATURES_GET``
1637 ``ETHTOOL_SSG`` ``ETHTOOL_MSG_FEATURES_SET``
1638 ``ETHTOOL_TEST`` n/a
1639 ``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET``
1640 ``ETHTOOL_PHYS_ID`` n/a
1641 ``ETHTOOL_GSTATS`` n/a
1642 ``ETHTOOL_GTSO`` ``ETHTOOL_MSG_FEATURES_GET``
1643 ``ETHTOOL_STSO`` ``ETHTOOL_MSG_FEATURES_SET``
1644 ``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK``
1645 ``ETHTOOL_GUFO`` ``ETHTOOL_MSG_FEATURES_GET``
1646 ``ETHTOOL_SUFO`` ``ETHTOOL_MSG_FEATURES_SET``
1647 ``ETHTOOL_GGSO`` ``ETHTOOL_MSG_FEATURES_GET``
1648 ``ETHTOOL_SGSO`` ``ETHTOOL_MSG_FEATURES_SET``
1649 ``ETHTOOL_GFLAGS`` ``ETHTOOL_MSG_FEATURES_GET``
1650 ``ETHTOOL_SFLAGS`` ``ETHTOOL_MSG_FEATURES_SET``
1651 ``ETHTOOL_GPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_GET``
1652 ``ETHTOOL_SPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_SET``
1653 ``ETHTOOL_GRXFH`` n/a
1654 ``ETHTOOL_SRXFH`` n/a
1655 ``ETHTOOL_GGRO`` ``ETHTOOL_MSG_FEATURES_GET``
1656 ``ETHTOOL_SGRO`` ``ETHTOOL_MSG_FEATURES_SET``
1657 ``ETHTOOL_GRXRINGS`` n/a
1658 ``ETHTOOL_GRXCLSRLCNT`` n/a
1659 ``ETHTOOL_GRXCLSRULE`` n/a
1660 ``ETHTOOL_GRXCLSRLALL`` n/a
1661 ``ETHTOOL_SRXCLSRLDEL`` n/a
1662 ``ETHTOOL_SRXCLSRLINS`` n/a
1663 ``ETHTOOL_FLASHDEV`` n/a
1664 ``ETHTOOL_RESET`` n/a
1665 ``ETHTOOL_SRXNTUPLE`` n/a
1666 ``ETHTOOL_GRXNTUPLE`` n/a
1667 ``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET``
1668 ``ETHTOOL_GRXFHINDIR`` n/a
1669 ``ETHTOOL_SRXFHINDIR`` n/a
1670 ``ETHTOOL_GFEATURES`` ``ETHTOOL_MSG_FEATURES_GET``
1671 ``ETHTOOL_SFEATURES`` ``ETHTOOL_MSG_FEATURES_SET``
1672 ``ETHTOOL_GCHANNELS`` ``ETHTOOL_MSG_CHANNELS_GET``
1673 ``ETHTOOL_SCHANNELS`` ``ETHTOOL_MSG_CHANNELS_SET``
1674 ``ETHTOOL_SET_DUMP`` n/a
1675 ``ETHTOOL_GET_DUMP_FLAG`` n/a
1676 ``ETHTOOL_GET_DUMP_DATA`` n/a
1677 ``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET``
1678 ``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
1679 ``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
1680 ``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET``
1681 ``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET``
1682 ``ETHTOOL_GRSSH`` n/a
1683 ``ETHTOOL_SRSSH`` n/a
1684 ``ETHTOOL_GTUNABLE`` n/a
1685 ``ETHTOOL_STUNABLE`` n/a
1686 ``ETHTOOL_GPHYSTATS`` n/a
1687 ``ETHTOOL_PERQUEUE`` n/a
1688 ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET``
1689 ``ETHTOOL_MSG_LINKMODES_GET``
1690 ``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET``
1691 ``ETHTOOL_MSG_LINKMODES_SET``
1692 ``ETHTOOL_PHY_GTUNABLE`` n/a
1693 ``ETHTOOL_PHY_STUNABLE`` n/a
1694 ``ETHTOOL_GFECPARAM`` ``ETHTOOL_MSG_FEC_GET``
1695 ``ETHTOOL_SFECPARAM`` ``ETHTOOL_MSG_FEC_SET``
1696 n/a ``ETHTOOL_MSG_CABLE_TEST_ACT``
1697 n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``
1698 n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET``
1699 n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET``
1700 n/a ``ETHTOOL_MSG_MODULE_GET``
1701 n/a ``ETHTOOL_MSG_MODULE_SET``
1702 =================================== =====================================