1 .. SPDX-License-Identifier: GPL-2.0
3 ==========================================
4 WHAT IS Flash-Friendly File System (F2FS)?
5 ==========================================
7 NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have
8 been equipped on a variety systems ranging from mobile to server systems. Since
9 they are known to have different characteristics from the conventional rotating
10 disks, a file system, an upper layer to the storage device, should adapt to the
11 changes from the sketch in the design level.
13 F2FS is a file system exploiting NAND flash memory-based storage devices, which
14 is based on Log-structured File System (LFS). The design has been focused on
15 addressing the fundamental issues in LFS, which are snowball effect of wandering
16 tree and high cleaning overhead.
18 Since a NAND flash memory-based storage device shows different characteristic
19 according to its internal geometry or flash memory management scheme, namely FTL,
20 F2FS and its tools support various parameters not only for configuring on-disk
21 layout, but also for selecting allocation and cleaning algorithms.
23 The following git tree provides the file system formatting tool (mkfs.f2fs),
24 a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs).
26 - git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git
28 For reporting bugs and sending patches, please use the following mailing list:
30 - linux-f2fs-devel@lists.sourceforge.net
32 Background and Design issues
33 ============================
35 Log-structured File System (LFS)
36 --------------------------------
37 "A log-structured file system writes all modifications to disk sequentially in
38 a log-like structure, thereby speeding up both file writing and crash recovery.
39 The log is the only structure on disk; it contains indexing information so that
40 files can be read back from the log efficiently. In order to maintain large free
41 areas on disk for fast writing, we divide the log into segments and use a
42 segment cleaner to compress the live information from heavily fragmented
43 segments." from Rosenblum, M. and Ousterhout, J. K., 1992, "The design and
44 implementation of a log-structured file system", ACM Trans. Computer Systems
47 Wandering Tree Problem
48 ----------------------
49 In LFS, when a file data is updated and written to the end of log, its direct
50 pointer block is updated due to the changed location. Then the indirect pointer
51 block is also updated due to the direct pointer block update. In this manner,
52 the upper index structures such as inode, inode map, and checkpoint block are
53 also updated recursively. This problem is called as wandering tree problem [1],
54 and in order to enhance the performance, it should eliminate or relax the update
55 propagation as much as possible.
57 [1] Bityutskiy, A. 2005. JFFS3 design issues. http://www.linux-mtd.infradead.org/
61 Since LFS is based on out-of-place writes, it produces so many obsolete blocks
62 scattered across the whole storage. In order to serve new empty log space, it
63 needs to reclaim these obsolete blocks seamlessly to users. This job is called
64 as a cleaning process.
66 The process consists of three operations as follows.
68 1. A victim segment is selected through referencing segment usage table.
69 2. It loads parent index structures of all the data in the victim identified by
70 segment summary blocks.
71 3. It checks the cross-reference between the data and its parent index structure.
72 4. It moves valid data selectively.
74 This cleaning job may cause unexpected long delays, so the most important goal
75 is to hide the latencies to users. And also definitely, it should reduce the
76 amount of valid data to be moved, and move them quickly as well.
83 - Enlarge the random write area for better performance, but provide the high
85 - Align FS data structures to the operational units in FTL as best efforts
87 Wandering Tree Problem
88 ----------------------
89 - Use a term, “node”, that represents inodes as well as various pointer blocks
90 - Introduce Node Address Table (NAT) containing the locations of all the “node”
91 blocks; this will cut off the update propagation.
95 - Support a background cleaning process
96 - Support greedy and cost-benefit algorithms for victim selection policies
97 - Support multi-head logs for static/dynamic hot and cold data separation
98 - Introduce adaptive logging for efficient block allocation
104 ======================== ============================================================
105 background_gc=%s Turn on/off cleaning operations, namely garbage
106 collection, triggered in background when I/O subsystem is
107 idle. If background_gc=on, it will turn on the garbage
108 collection and if background_gc=off, garbage collection
109 will be turned off. If background_gc=sync, it will turn
110 on synchronous garbage collection running in background.
111 Default value for this option is on. So garbage
112 collection is on by default.
113 gc_merge When background_gc is on, this option can be enabled to
114 let background GC thread to handle foreground GC requests,
115 it can eliminate the sluggish issue caused by slow foreground
116 GC operation when GC is triggered from a process with limited
117 I/O and CPU resources.
118 nogc_merge Disable GC merge feature.
119 disable_roll_forward Disable the roll-forward recovery routine
120 norecovery Disable the roll-forward recovery routine, mounted read-
121 only (i.e., -o ro,disable_roll_forward)
122 discard/nodiscard Enable/disable real-time discard in f2fs, if discard is
123 enabled, f2fs will issue discard/TRIM commands when a
125 no_heap Disable heap-style segment allocation which finds free
126 segments for data from the beginning of main area, while
127 for node from the end of main area.
128 nouser_xattr Disable Extended User Attributes. Note: xattr is enabled
129 by default if CONFIG_F2FS_FS_XATTR is selected.
130 noacl Disable POSIX Access Control List. Note: acl is enabled
131 by default if CONFIG_F2FS_FS_POSIX_ACL is selected.
132 active_logs=%u Support configuring the number of active logs. In the
133 current design, f2fs supports only 2, 4, and 6 logs.
135 disable_ext_identify Disable the extension list configured by mkfs, so f2fs
136 is not aware of cold files such as media files.
137 inline_xattr Enable the inline xattrs feature.
138 noinline_xattr Disable the inline xattrs feature.
139 inline_xattr_size=%u Support configuring inline xattr size, it depends on
140 flexible inline xattr feature.
141 inline_data Enable the inline data feature: Newly created small (<~3.4k)
142 files can be written into inode block.
143 inline_dentry Enable the inline dir feature: data in newly created
144 directory entries can be written into inode block. The
145 space of inode block which is used to store inline
146 dentries is limited to ~3.4k.
147 noinline_dentry Disable the inline dentry feature.
148 flush_merge Merge concurrent cache_flush commands as much as possible
149 to eliminate redundant command issues. If the underlying
150 device handles the cache_flush command relatively slowly,
151 recommend to enable this option.
152 nobarrier This option can be used if underlying storage guarantees
153 its cached data should be written to the novolatile area.
154 If this option is set, no cache_flush commands are issued
155 but f2fs still guarantees the write ordering of all the
157 fastboot This option is used when a system wants to reduce mount
158 time as much as possible, even though normal performance
160 extent_cache Enable an extent cache based on rb-tree, it can cache
161 as many as extent which map between contiguous logical
162 address and physical address per inode, resulting in
163 increasing the cache hit ratio. Set by default.
164 noextent_cache Disable an extent cache based on rb-tree explicitly, see
165 the above extent_cache mount option.
166 noinline_data Disable the inline data feature, inline data feature is
168 data_flush Enable data flushing before checkpoint in order to
169 persist data of regular and symlink.
170 reserve_root=%d Support configuring reserved space which is used for
171 allocation from a privileged user with specified uid or
172 gid, unit: 4KB, the default limit is 0.2% of user blocks.
173 resuid=%d The user ID which may use the reserved blocks.
174 resgid=%d The group ID which may use the reserved blocks.
175 fault_injection=%d Enable fault injection in all supported types with
176 specified injection rate.
177 fault_type=%d Support configuring fault injection type, should be
178 enabled with fault_injection option, fault type value
179 is shown below, it supports single or combined type.
181 =================== ===========
183 =================== ===========
184 FAULT_KMALLOC 0x000000001
185 FAULT_KVMALLOC 0x000000002
186 FAULT_PAGE_ALLOC 0x000000004
187 FAULT_PAGE_GET 0x000000008
188 FAULT_ALLOC_NID 0x000000020
189 FAULT_ORPHAN 0x000000040
190 FAULT_BLOCK 0x000000080
191 FAULT_DIR_DEPTH 0x000000100
192 FAULT_EVICT_INODE 0x000000200
193 FAULT_TRUNCATE 0x000000400
194 FAULT_READ_IO 0x000000800
195 FAULT_CHECKPOINT 0x000001000
196 FAULT_DISCARD 0x000002000
197 FAULT_WRITE_IO 0x000004000
198 =================== ===========
199 mode=%s Control block allocation mode which supports "adaptive"
200 and "lfs". In "lfs" mode, there should be no random
201 writes towards main area.
202 io_bits=%u Set the bit size of write IO requests. It should be set
204 usrquota Enable plain user disk quota accounting.
205 grpquota Enable plain group disk quota accounting.
206 prjquota Enable plain project quota accounting.
207 usrjquota=<file> Appoint specified file and type during mount, so that quota
208 grpjquota=<file> information can be properly updated during recovery flow,
209 prjjquota=<file> <quota file>: must be in root directory;
210 jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1].
211 offusrjquota Turn off user journalled quota.
212 offgrpjquota Turn off group journalled quota.
213 offprjjquota Turn off project journalled quota.
214 quota Enable plain user disk quota accounting.
215 noquota Disable all plain disk quota option.
216 whint_mode=%s Control which write hints are passed down to block
217 layer. This supports "off", "user-based", and
218 "fs-based". In "off" mode (default), f2fs does not pass
219 down hints. In "user-based" mode, f2fs tries to pass
220 down hints given by users. And in "fs-based" mode, f2fs
221 passes down hints with its policy.
222 alloc_mode=%s Adjust block allocation policy, which supports "reuse"
224 fsync_mode=%s Control the policy of fsync. Currently supports "posix",
225 "strict", and "nobarrier". In "posix" mode, which is
226 default, fsync will follow POSIX semantics and does a
227 light operation to improve the filesystem performance.
228 In "strict" mode, fsync will be heavy and behaves in line
229 with xfs, ext4 and btrfs, where xfstest generic/342 will
230 pass, but the performance will regress. "nobarrier" is
231 based on "posix", but doesn't issue flush command for
232 non-atomic files likewise "nobarrier" mount option.
233 test_dummy_encryption
234 test_dummy_encryption=%s
235 Enable dummy encryption, which provides a fake fscrypt
236 context. The fake fscrypt context is used by xfstests.
237 The argument may be either "v1" or "v2", in order to
238 select the corresponding fscrypt policy version.
239 checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable"
240 to reenable checkpointing. Is enabled by default. While
241 disabled, any unmounting or unexpected shutdowns will cause
242 the filesystem contents to appear as they did when the
243 filesystem was mounted with that option.
244 While mounting with checkpoint=disabled, the filesystem must
245 run garbage collection to ensure that all available space can
246 be used. If this takes too much time, the mount may return
247 EAGAIN. You may optionally add a value to indicate how much
248 of the disk you would be willing to temporarily give up to
249 avoid additional garbage collection. This can be given as a
250 number of blocks, or as a percent. For instance, mounting
251 with checkpoint=disable:100% would always succeed, but it may
252 hide up to all remaining free space. The actual space that
253 would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable
254 This space is reclaimed once checkpoint=enable.
255 checkpoint_merge When checkpoint is enabled, this can be used to create a kernel
256 daemon and make it to merge concurrent checkpoint requests as
257 much as possible to eliminate redundant checkpoint issues. Plus,
258 we can eliminate the sluggish issue caused by slow checkpoint
259 operation when the checkpoint is done in a process context in
260 a cgroup having low i/o budget and cpu shares. To make this
261 do better, we set the default i/o priority of the kernel daemon
262 to "3", to give one higher priority than other kernel threads.
263 This is the same way to give a I/O priority to the jbd2
264 journaling thread of ext4 filesystem.
265 nocheckpoint_merge Disable checkpoint merge feature.
266 compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo",
267 "lz4", "zstd" and "lzo-rle" algorithm.
268 compress_algorithm=%s:%d Control compress algorithm and its compress level, now, only
269 "lz4" and "zstd" support compress level config.
270 algorithm level range
273 compress_log_size=%u Support configuring compress cluster size, the size will
274 be 4KB * (1 << %u), 16KB is minimum size, also it's
276 compress_extension=%s Support adding specified extension, so that f2fs can enable
277 compression on those corresponding files, e.g. if all files
278 with '.ext' has high compression rate, we can set the '.ext'
279 on compression extension list and enable compression on
280 these file by default rather than to enable it via ioctl.
281 For other files, we can still enable compression via ioctl.
282 Note that, there is one reserved special extension '*', it
283 can be set to enable compression for all files.
284 compress_chksum Support verifying chksum of raw data in compressed cluster.
285 compress_mode=%s Control file compression mode. This supports "fs" and "user"
286 modes. In "fs" mode (default), f2fs does automatic compression
287 on the compression enabled files. In "user" mode, f2fs disables
288 the automaic compression and gives the user discretion of
289 choosing the target file and the timing. The user can do manual
290 compression/decompression on the compression enabled files using
292 inlinecrypt When possible, encrypt/decrypt the contents of encrypted
293 files using the blk-crypto framework rather than
294 filesystem-layer encryption. This allows the use of
295 inline encryption hardware. The on-disk format is
296 unaffected. For more details, see
297 Documentation/block/inline-encryption.rst.
298 atgc Enable age-threshold garbage collection, it provides high
299 effectiveness and efficiency on background GC.
300 ======================== ============================================================
305 /sys/kernel/debug/f2fs/ contains information about all the partitions mounted as
306 f2fs. Each file shows the whole f2fs information.
308 /sys/kernel/debug/f2fs/status includes:
310 - major file system information managed by f2fs currently
311 - average SIT information about whole segments
312 - current memory footprint consumed by f2fs.
317 Information about mounted f2fs file systems can be found in
318 /sys/fs/f2fs. Each mounted filesystem will have a directory in
319 /sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda).
320 The files in each per-device directory are shown in table below.
322 Files in /sys/fs/f2fs/<devname>
323 (see also Documentation/ABI/testing/sysfs-fs-f2fs)
328 1. Download userland tools and compile them.
330 2. Skip, if f2fs was compiled statically inside kernel.
331 Otherwise, insert the f2fs.ko module::
335 3. Create a directory to use when mounting::
339 4. Format the block device, and then mount as f2fs::
341 # mkfs.f2fs -l label /dev/block_device
342 # mount -t f2fs /dev/block_device /mnt/f2fs
346 The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem,
347 which builds a basic on-disk layout.
349 The quick options consist of:
351 =============== ===========================================================
352 ``-l [label]`` Give a volume label, up to 512 unicode name.
353 ``-a [0 or 1]`` Split start location of each area for heap-based allocation.
355 1 is set by default, which performs this.
356 ``-o [int]`` Set overprovision ratio in percent over volume size.
359 ``-s [int]`` Set the number of segments per section.
362 ``-z [int]`` Set the number of sections per zone.
365 ``-e [str]`` Set basic extension list. e.g. "mp3,gif,mov"
366 ``-t [0 or 1]`` Disable discard command or not.
368 1 is set by default, which conducts discard.
369 =============== ===========================================================
371 Note: please refer to the manpage of mkfs.f2fs(8) to get full option list.
375 The fsck.f2fs is a tool to check the consistency of an f2fs-formatted
376 partition, which examines whether the filesystem metadata and user-made data
377 are cross-referenced correctly or not.
378 Note that, initial version of the tool does not fix any inconsistency.
380 The quick options consist of::
382 -d debug level [default:0]
384 Note: please refer to the manpage of fsck.f2fs(8) to get full option list.
388 The dump.f2fs shows the information of specific inode and dumps SSA and SIT to
389 file. Each file is dump_ssa and dump_sit.
391 The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem.
392 It shows on-disk inode information recognized by a given inode number, and is
393 able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and
394 ./dump_sit respectively.
396 The options consist of::
398 -d debug level [default:0]
400 -s [SIT dump segno from #1~#2 (decimal), for all 0~-1]
401 -a [SSA dump segno from #1~#2 (decimal), for all 0~-1]
405 # dump.f2fs -i [ino] /dev/sdx
406 # dump.f2fs -s 0~-1 /dev/sdx (SIT dump)
407 # dump.f2fs -a 0~-1 /dev/sdx (SSA dump)
409 Note: please refer to the manpage of dump.f2fs(8) to get full option list.
413 The sload.f2fs gives a way to insert files and directories in the exisiting disk
414 image. This tool is useful when building f2fs images given compiled files.
416 Note: please refer to the manpage of sload.f2fs(8) to get full option list.
420 The resize.f2fs lets a user resize the f2fs-formatted disk image, while preserving
421 all the files and directories stored in the image.
423 Note: please refer to the manpage of resize.f2fs(8) to get full option list.
427 The defrag.f2fs can be used to defragment scattered written data as well as
428 filesystem metadata across the disk. This can improve the write speed by giving
429 more free consecutive space.
431 Note: please refer to the manpage of defrag.f2fs(8) to get full option list.
435 The f2fs_io is a simple tool to issue various filesystem APIs as well as
436 f2fs-specific ones, which is very useful for QA tests.
438 Note: please refer to the manpage of f2fs_io(8) to get full option list.
446 F2FS divides the whole volume into a number of segments, each of which is fixed
447 to 2MB in size. A section is composed of consecutive segments, and a zone
448 consists of a set of sections. By default, section and zone sizes are set to one
449 segment size identically, but users can easily modify the sizes by mkfs.
451 F2FS splits the entire volume into six areas, and all the areas except superblock
452 consist of multiple segments as described below::
454 align with the zone size <-|
455 |-> align with the segment size
456 _________________________________________________________________________
457 | | | Segment | Node | Segment | |
458 | Superblock | Checkpoint | Info. | Address | Summary | Main |
459 | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | |
460 |____________|_____2______|______N______|______N______|______N_____|__N___|
464 ._________________________________________.
465 |_Segment_|_..._|_Segment_|_..._|_Segment_|
474 It is located at the beginning of the partition, and there exist two copies
475 to avoid file system crash. It contains basic partition information and some
476 default parameters of f2fs.
479 It contains file system information, bitmaps for valid NAT/SIT sets, orphan
480 inode lists, and summary entries of current active segments.
482 - Segment Information Table (SIT)
483 It contains segment information such as valid block count and bitmap for the
484 validity of all the blocks.
486 - Node Address Table (NAT)
487 It is composed of a block address table for all the node blocks stored in
490 - Segment Summary Area (SSA)
491 It contains summary entries which contains the owner information of all the
492 data and node blocks stored in Main area.
495 It contains file and directory data including their indices.
497 In order to avoid misalignment between file system and flash-based storage, F2FS
498 aligns the start block address of CP with the segment size. Also, it aligns the
499 start block address of Main area with the zone size by reserving some segments
502 Reference the following survey for additional technical details.
503 https://wiki.linaro.org/WorkingGroups/Kernel/Projects/FlashCardSurvey
505 File System Metadata Structure
506 ------------------------------
508 F2FS adopts the checkpointing scheme to maintain file system consistency. At
509 mount time, F2FS first tries to find the last valid checkpoint data by scanning
510 CP area. In order to reduce the scanning time, F2FS uses only two copies of CP.
511 One of them always indicates the last valid data, which is called as shadow copy
512 mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism.
514 For file system consistency, each CP points to which NAT and SIT copies are
515 valid, as shown as below::
517 +--------+----------+---------+
519 +--------+----------+---------+
523 +-------+-------+--------+--------+--------+--------+
524 | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
525 +-------+-------+--------+--------+--------+--------+
528 `----------------------------------------'
533 The key data structure to manage the data locations is a "node". Similar to
534 traditional file structures, F2FS has three types of node: inode, direct node,
535 indirect node. F2FS assigns 4KB to an inode block which contains 923 data block
536 indices, two direct node pointers, two indirect node pointers, and one double
537 indirect node pointer as described below. One direct node block contains 1018
538 data blocks, and one indirect node block contains also 1018 node blocks. Thus,
539 one inode block (i.e., a file) covers::
541 4KB * (923 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB.
548 | `- direct node (1018)
550 `- double indirect node (1)
551 `- indirect node (1018)
552 `- direct node (1018)
555 Note that all the node blocks are mapped by NAT which means the location of
556 each node is translated by the NAT table. In the consideration of the wandering
557 tree problem, F2FS is able to cut off the propagation of node updates caused by
563 A directory entry occupies 11 bytes, which consists of the following attributes.
565 - hash hash value of the file name
567 - len the length of file name
568 - type file type such as directory, symlink, etc
570 A dentry block consists of 214 dentry slots and file names. Therein a bitmap is
571 used to represent whether each dentry is valid or not. A dentry block occupies
572 4KB with the following composition.
576 Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) +
577 dentries(11 * 214 bytes) + file name (8 * 214 bytes)
580 +--------------------------------+
581 |dentry block 1 | dentry block 2 |
582 +--------------------------------+
585 . [Dentry Block Structure: 4KB] .
586 +--------+----------+----------+------------+
587 | bitmap | reserved | dentries | file names |
588 +--------+----------+----------+------------+
589 [Dentry Block: 4KB] . .
592 +------+------+-----+------+
593 | hash | ino | len | type |
594 +------+------+-----+------+
595 [Dentry Structure: 11 bytes]
597 F2FS implements multi-level hash tables for directory structure. Each level has
598 a hash table with dedicated number of hash buckets as shown below. Note that
599 "A(2B)" means a bucket includes 2 data blocks.
603 ----------------------
606 N : MAX_DIR_HASH_DEPTH
607 ----------------------
611 level #1 | A(2B) - A(2B)
613 level #2 | A(2B) - A(2B) - A(2B) - A(2B)
615 level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
617 level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)
619 The number of blocks and buckets are determined by::
621 ,- 2, if n < MAX_DIR_HASH_DEPTH / 2,
622 # of blocks in level #n = |
625 ,- 2^(n + dir_level),
626 | if n + dir_level < MAX_DIR_HASH_DEPTH / 2,
627 # of buckets in level #n = |
628 `- 2^((MAX_DIR_HASH_DEPTH / 2) - 1),
631 When F2FS finds a file name in a directory, at first a hash value of the file
632 name is calculated. Then, F2FS scans the hash table in level #0 to find the
633 dentry consisting of the file name and its inode number. If not found, F2FS
634 scans the next hash table in level #1. In this way, F2FS scans hash tables in
635 each levels incrementally from 1 to N. In each level F2FS needs to scan only
636 one bucket determined by the following equation, which shows O(log(# of files))
639 bucket number to scan in level #n = (hash value) % (# of buckets in level #n)
641 In the case of file creation, F2FS finds empty consecutive slots that cover the
642 file name. F2FS searches the empty slots in the hash tables of whole levels from
643 1 to N in the same way as the lookup operation.
645 The following figure shows an example of two cases holding children::
647 --------------> Dir <--------------
651 child - child [hole] - child
653 child - child - child [hole] - [hole] - child
656 Number of children = 6, Number of children = 3,
657 File size = 7 File size = 7
659 Default Block Allocation
660 ------------------------
662 At runtime, F2FS manages six active logs inside "Main" area: Hot/Warm/Cold node
663 and Hot/Warm/Cold data.
665 - Hot node contains direct node blocks of directories.
666 - Warm node contains direct node blocks except hot node blocks.
667 - Cold node contains indirect node blocks
668 - Hot data contains dentry blocks
669 - Warm data contains data blocks except hot and cold data blocks
670 - Cold data contains multimedia data or migrated data blocks
672 LFS has two schemes for free space management: threaded log and copy-and-compac-
673 tion. The copy-and-compaction scheme which is known as cleaning, is well-suited
674 for devices showing very good sequential write performance, since free segments
675 are served all the time for writing new data. However, it suffers from cleaning
676 overhead under high utilization. Contrarily, the threaded log scheme suffers
677 from random writes, but no cleaning process is needed. F2FS adopts a hybrid
678 scheme where the copy-and-compaction scheme is adopted by default, but the
679 policy is dynamically changed to the threaded log scheme according to the file
682 In order to align F2FS with underlying flash-based storage, F2FS allocates a
683 segment in a unit of section. F2FS expects that the section size would be the
684 same as the unit size of garbage collection in FTL. Furthermore, with respect
685 to the mapping granularity in FTL, F2FS allocates each section of the active
686 logs from different zones as much as possible, since FTL can write the data in
687 the active logs into one allocation unit according to its mapping granularity.
692 F2FS does cleaning both on demand and in the background. On-demand cleaning is
693 triggered when there are not enough free segments to serve VFS calls. Background
694 cleaner is operated by a kernel thread, and triggers the cleaning job when the
697 F2FS supports two victim selection policies: greedy and cost-benefit algorithms.
698 In the greedy algorithm, F2FS selects a victim segment having the smallest number
699 of valid blocks. In the cost-benefit algorithm, F2FS selects a victim segment
700 according to the segment age and the number of valid blocks in order to address
701 log block thrashing problem in the greedy algorithm. F2FS adopts the greedy
702 algorithm for on-demand cleaner, while background cleaner adopts cost-benefit
705 In order to identify whether the data in the victim segment are valid or not,
706 F2FS manages a bitmap. Each bit represents the validity of a block, and the
707 bitmap is composed of a bit stream covering whole blocks in main area.
712 1) whint_mode=off. F2FS only passes down WRITE_LIFE_NOT_SET.
714 2) whint_mode=user-based. F2FS tries to pass down hints given by
717 ===================== ======================== ===================
719 ===================== ======================== ===================
720 META WRITE_LIFE_NOT_SET
724 ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
728 WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
729 WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
730 WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
732 WRITE_LIFE_MEDIUM " "
736 WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
737 WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
738 WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
739 WRITE_LIFE_NONE " WRITE_LIFE_NONE
740 WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
741 WRITE_LIFE_LONG " WRITE_LIFE_LONG
742 ===================== ======================== ===================
744 3) whint_mode=fs-based. F2FS passes down hints with its policy.
746 ===================== ======================== ===================
748 ===================== ======================== ===================
749 META WRITE_LIFE_MEDIUM;
750 HOT_NODE WRITE_LIFE_NOT_SET
752 COLD_NODE WRITE_LIFE_NONE
753 ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
757 WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
758 WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
759 WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_LONG
761 WRITE_LIFE_MEDIUM " "
765 WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
766 WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
767 WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
768 WRITE_LIFE_NONE " WRITE_LIFE_NONE
769 WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
770 WRITE_LIFE_LONG " WRITE_LIFE_LONG
771 ===================== ======================== ===================
776 The default policy follows the below POSIX rule.
778 Allocating disk space
779 The default operation (i.e., mode is zero) of fallocate() allocates
780 the disk space within the range specified by offset and len. The
781 file size (as reported by stat(2)) will be changed if offset+len is
782 greater than the file size. Any subregion within the range specified
783 by offset and len that did not contain data before the call will be
784 initialized to zero. This default behavior closely resembles the
785 behavior of the posix_fallocate(3) library function, and is intended
786 as a method of optimally implementing that function.
788 However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to
789 fallocate(fd, DEFAULT_MODE), it allocates on-disk block addressess having
790 zero or random data, which is useful to the below scenario where:
793 2. ioctl(fd, F2FS_IOC_SET_PIN_FILE)
794 3. fallocate(fd, 0, 0, size)
795 4. address = fibmap(fd, offset)
797 6. write(blkdev, address)
799 Compression implementation
800 --------------------------
802 - New term named cluster is defined as basic unit of compression, file can
803 be divided into multiple clusters logically. One cluster includes 4 << n
804 (n >= 0) logical pages, compression size is also cluster size, each of
805 cluster can be compressed or not.
807 - In cluster metadata layout, one special block address is used to indicate
808 a cluster is a compressed one or normal one; for compressed cluster, following
809 metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs
810 stores data including compress header and compressed data.
812 - In order to eliminate write amplification during overwrite, F2FS only
813 support compression on write-once file, data can be compressed only when
814 all logical blocks in cluster contain valid data and compress ratio of
815 cluster data is lower than specified threshold.
817 - To enable compression on regular inode, there are three ways:
820 * chattr +c dir; touch dir/file
821 * mount w/ -o compress_extension=ext; touch file.ext
822 * mount w/ -o compress_extension=*; touch any_file
824 - At this point, compression feature doesn't expose compressed space to user
825 directly in order to guarantee potential data updates later to the space.
826 Instead, the main goal is to reduce data writes to flash disk as much as
827 possible, resulting in extending disk life time as well as relaxing IO
828 congestion. Alternatively, we've added ioctl interface to reclaim compressed
829 space and show it to user after putting the immutable bit.
831 Compress metadata layout::
834 +-----------------------------------------------+
835 | cluster 1 | cluster 2 | ......... | cluster N |
836 +-----------------------------------------------+
839 . Compressed Cluster . . Normal Cluster .
840 +----------+---------+---------+---------+ +---------+---------+---------+---------+
841 |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
842 +----------+---------+---------+---------+ +---------+---------+---------+---------+
846 +-------------+-------------+----------+----------------------------+
847 | data length | data chksum | reserved | compressed data |
848 +-------------+-------------+----------+----------------------------+
851 --------------------------
853 f2fs supports "fs" and "user" compression modes with "compression_mode" mount option.
854 With this option, f2fs provides a choice to select the way how to compress the
855 compression enabled files (refer to "Compression implementation" section for how to
856 enable compression on a regular inode).
859 This is the default option. f2fs does automatic compression in the writeback of the
860 compression enabled files.
862 2) compress_mode=user
863 This disables the automatic compression and gives the user discretion of choosing the
864 target file and the timing. The user can do manual compression/decompression on the
865 compression enabled files using F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
866 ioctls like the below.
868 To decompress a file,
870 fd = open(filename, O_WRONLY, 0);
871 ret = ioctl(fd, F2FS_IOC_DECOMPRESS_FILE);
875 fd = open(filename, O_WRONLY, 0);
876 ret = ioctl(fd, F2FS_IOC_COMPRESS_FILE);
878 NVMe Zoned Namespace devices
879 ----------------------------
881 - ZNS defines a per-zone capacity which can be equal or less than the
882 zone-size. Zone-capacity is the number of usable blocks in the zone.
883 F2FS checks if zone-capacity is less than zone-size, if it is, then any
884 segment which starts after the zone-capacity is marked as not-free in
885 the free segment bitmap at initial mount time. These segments are marked
886 as permanently used so they are not allocated for writes and
887 consequently are not needed to be garbage collected. In case the
888 zone-capacity is not aligned to default segment size(2MB), then a segment
889 can start before the zone-capacity and span across zone-capacity boundary.
890 Such spanning segments are also considered as usable segments. All blocks
891 past the zone-capacity are considered unusable in these segments.
projects / linux-2.6-microblaze.git / blob