1 TCPCI(Typec port cotroller interface) binding
2 ---------------------------------------------
5 - compatible: should be set one of following:
6 - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
8 - reg: the i2c slave address of typec port controller device.
9 - interrupt-parent: the phandle to the interrupt controller which provides
11 - interrupts: interrupt specification for tcpci alert.
14 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
15 of connector node are specified in
16 Documentation/devicetree/bindings/connector/usb-connector.yaml
21 compatible = "nxp,ptn5110";
23 interrupt-parent = <&gpio3>;
24 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
27 compatible = "usb-c-connector";
31 try-power-role = "sink";
32 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
33 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
34 PDO_VAR(5000, 12000, 2000)>;
35 op-sink-microwatt = <10000000>;
43 usb_con_ss: endpoint {
44 remote-endpoint = <&usb3_data_ss>;