Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / spi / ti_qspi.txt
1 TI QSPI controller.
2
3 Required properties:
4 - compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
5 - reg: Should contain QSPI registers location and length.
6 - reg-names: Should contain the resource reg names.
7         - qspi_base: Qspi configuration register Address space
8         - qspi_mmap: Memory mapped Address space
9         - (optional) qspi_ctrlmod: Control module Address space
10 - interrupts: should contain the qspi interrupt number.
11 - #address-cells, #size-cells : Must be present if the device has sub-nodes
12 - ti,hwmods: Name of the hwmod associated to the QSPI
13
14 Recommended properties:
15 - spi-max-frequency: Definition as per
16                      Documentation/devicetree/bindings/spi/spi-bus.txt
17
18 Optional properties:
19 - syscon-chipselects: Handle to system control region contains QSPI
20                       chipselect register and offset of that register.
21
22 NOTE: TI QSPI controller requires different pinmux and IODelay
23 parameters for Mode-0 and Mode-3 operations, which needs to be set up by
24 the bootloader (U-Boot). Default configuration only supports Mode-0
25 operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
26 specified in the slave nodes of TI QSPI controller without appropriate
27 modification to bootloader.
28
29 Example:
30
31 For am4372:
32 qspi: qspi@4b300000 {
33         compatible = "ti,am4372-qspi";
34         reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
35         reg-names = "qspi_base", "qspi_mmap";
36         #address-cells = <1>;
37         #size-cells = <0>;
38         spi-max-frequency = <25000000>;
39         ti,hwmods = "qspi";
40 };
41
42 For dra7xx:
43 qspi: qspi@4b300000 {
44         compatible = "ti,dra7xxx-qspi";
45         reg = <0x4b300000 0x100>,
46               <0x5c000000 0x4000000>,
47         reg-names = "qspi_base", "qspi_mmap";
48         syscon-chipselects = <&scm_conf 0x558>;
49         #address-cells = <1>;
50         #size-cells = <0>;
51         spi-max-frequency = <48000000>;
52         ti,hwmods = "qspi";
53 };