1 ARM Freescale DSPI controller
4 - compatible : "fsl,vf610-dspi"
5 - reg : Offset and length of the register set for the device
6 - interrupts : Should contain SPI controller interrupt
7 - clocks: from common clock binding: handle to dspi clock.
8 - clock-names: from common clock binding: Shall be "dspi".
9 - pinctrl-0: pin control group to be used for this controller.
10 - pinctrl-names: must contain a "default" entry.
11 - spi-num-chipselects : the number of the chipselect signals.
12 - bus-num : the slave chip chipselect signal number.
18 compatible = "fsl,vf610-dspi";
19 reg = <0x4002c000 0x1000>;
20 interrupts = <0 67 0x04>;
21 clocks = <&clks VF610_CLK_DSPI0>;
23 spi-num-chipselects = <5>;
25 pinctrl-names = "default";
26 pinctrl-0 = <&pinctrl_dspi0_1>;
29 sflash: at26df081a@0 {
32 compatible = "atmel,at26df081a";
33 spi-max-frequency = <16000000>;
37 linux,modalias = "m25p80";