Merge tag 'spi-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / sound / tlv320adcx140.yaml
1 # SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
2 # Copyright (C) 2019 Texas Instruments Incorporated
3 %YAML 1.2
4 ---
5 $id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
7
8 title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
9
10 maintainers:
11   - Dan Murphy <dmurphy@ti.com>
12
13 description: |
14   The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
15   PDM microphones recording), high-performance audio, analog-to-digital
16   converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
17   family supports line and  microphone Inputs, and offers a programmable
18   microphone bias or supply voltage generation.
19
20   Specifications can be found at:
21     http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
22     http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
23     http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
24
25 properties:
26   compatible:
27     oneOf:
28       - const: ti,tlv320adc3140
29       - const: ti,tlv320adc5140
30       - const: ti,tlv320adc6140
31
32   reg:
33     maxItems: 1
34     description: |
35        I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
36
37   reset-gpios:
38     description: |
39        GPIO used for hardware reset.
40
41   areg-supply:
42       description: |
43        Regulator with AVDD at 3.3V.  If not defined then the internal regulator
44        is enabled.
45
46   ti,mic-bias-source:
47     description: |
48        Indicates the source for MIC Bias.
49        0 - Mic bias is set to VREF
50        1 - Mic bias is set to VREF × 1.096
51        6 - Mic bias is set to AVDD
52     $ref: /schemas/types.yaml#/definitions/uint32
53     enum: [0, 1, 6]
54
55   ti,vref-source:
56     description: |
57        Indicates the source for MIC Bias.
58        0 - Set VREF to 2.75V
59        1 - Set VREF to 2.5V
60        2 - Set VREF to 1.375V
61     $ref: /schemas/types.yaml#/definitions/uint32
62     enum: [0, 1, 2]
63
64   ti,pdm-edge-select:
65     description: |
66        Defines the PDMCLK sampling edge configuration for the PDM inputs.  This
67        array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
68
69        0 - (default) Odd channel is latched on the negative edge and even
70        channel is latched on the the positive edge.
71        1 - Odd channel is latched on the positive edge and even channel is
72        latched on the the negative edge.
73
74        PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
75        PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
76        PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
77        PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
78
79     $ref: /schemas/types.yaml#/definitions/uint32-array
80     minItems: 1
81     maxItems: 4
82     items:
83       maximum: 1
84     default: [0, 0, 0, 0]
85
86   ti,gpi-config:
87     description: |
88        Defines the configuration for the general purpose input pins (GPI).
89        The array is defined as <GPI1 GPI2 GPI3 GPI4>.
90
91        0 - (default) disabled
92        1 - GPIX is configured as a general-purpose input (GPI)
93        2 - GPIX is configured as a master clock input (MCLK)
94        3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
95        4 - GPIX is configured as a PDM data input for channel 1 and channel
96             (PDMDIN1)
97        5 - GPIX is configured as a PDM data input for channel 3 and channel
98             (PDMDIN2)
99        6 - GPIX is configured as a PDM data input for channel 5 and channel
100             (PDMDIN3)
101        7 - GPIX is configured as a PDM data input for channel 7 and channel
102             (PDMDIN4)
103
104     $ref: /schemas/types.yaml#/definitions/uint32-array
105     minItems: 1
106     maxItems: 4
107     items:
108       maximum: 7
109     default: [0, 0, 0, 0]
110
111 required:
112   - compatible
113   - reg
114
115 examples:
116   - |
117     #include <dt-bindings/gpio/gpio.h>
118     i2c0 {
119       #address-cells = <1>;
120       #size-cells = <0>;
121       codec: codec@4c {
122         compatible = "ti,tlv320adc5140";
123         reg = <0x4c>;
124         ti,mic-bias-source = <6>;
125         ti,pdm-edge-select = <0 1 0 1>;
126         ti,gpi-config = <4 5 6 7>;
127         reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
128       };
129     };