dt-bindings: Clean-up schema indentation formatting
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / serial / rs485.yaml
1 # SPDX-License-Identifier: GPL-2.0
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/serial/rs485.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: RS485 serial communications Bindings
8
9 description: The RTS signal is capable of automatically controlling line
10   direction for the built-in half-duplex mode. The properties described
11   hereafter shall be given to a half-duplex capable UART node.
12
13 maintainers:
14   - Rob Herring <robh@kernel.org>
15
16 properties:
17   rs485-rts-delay:
18     description: prop-encoded-array <a b>
19     allOf:
20       - $ref: /schemas/types.yaml#/definitions/uint32-array
21       - items:
22           items:
23             - description:
24                 Delay between rts signal and beginning of data sent in milliseconds.
25                 It corresponds to the delay before sending data.
26               default: 0
27               maximum: 1000
28             - description:
29                 Delay between end of data sent and rts signal in milliseconds.
30                 It corresponds to the delay after sending data and actual release of the line.
31               default: 0
32               maximum: 1000
33
34   rs485-rts-active-low:
35     description: drive RTS low when sending (default is high).
36     $ref: /schemas/types.yaml#/definitions/flag
37
38   linux,rs485-enabled-at-boot-time:
39     description: enables the rs485 feature at boot time. It can be disabled
40       later with proper ioctl.
41     $ref: /schemas/types.yaml#/definitions/flag
42
43   rs485-rx-during-tx:
44     description: enables the receiving of data even while sending data.
45     $ref: /schemas/types.yaml#/definitions/flag
46 ...